Used Cold Pilger Rolling Mill for sale (18,083)

Condition: used, machine/vehicle number: 5257, Inlet: 800 x 200 mm Rotor diameter: 200 mm Width: 880 mm Nwedpfx Aneyr I E Romok Rotor blades: 3 Stator blades: 2 Drive: 5.5 kW

Condition: like new (used), Kaltenbach TL 350, manufactured in 1993, but used very rarely! Aluminum circular saw with manual feed and manual vertical clamping device. According to Kaltenbach documentation, the technical specifications of the TL 350 are: Saw blade: Ø 350 mm Motor power: 2.0 kW Cutting speed: 3,200 m/min Cutting range 90°: round 115 mm, square 100 mm, flat 250 × 40 mm Njdpfx Anezww A Uomswk Cutting range 45°: round 115 mm, square 100 mm, flat 190 × 40 mm Mitre angle: −45° to +30° Weight: approx. 68 kg Dimensions: approx. 450 × 840 × 750 mm Working height with base: approx. 1,008 mm A new saw blade is included!

Condition: used, machine/vehicle number: 12248, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 300 x 600 mm Drive motor: 37 kW Nsdpfxsyr Tnwe Anmowk

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 350 x 450 mm Nodpfx Ajyr Tn Denmowk Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 13253, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 rows Nwjdsyr Txpjpfx Anmjk Stator knives: 3 rows Inlet cross-section approx. 1200 x 800 mm Drive motor: as per customer request

Condition: used, machine/vehicle number: 13277, Rotor diameter: 320 mm Rotor width: 440 mm Rotor knives: 3×2 Stator knives: 2 Nwodpfx Anjyr Txvomjk Feed opening approx. 450 x 300 mm Drive motor: 11 kW

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Stator blade rows: 2 Rotor width: 520 mm Rotor diameter: 340 mm Inlet dimensions: 500 x 350 mm Nodeyr Tmaepfx Anmswk

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 3 kg, first registration: 09/2025, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP ROLL-OFF CONTAINER FOR BULKY WASTE WITH REAR OPENING AND TWO SWING DOORS, 200 MM BEAMS, FLOOR TO BE REPAIRED REF: 25-U-121 TYPE: bulky waste NEW: no LID: no OPENING: rear, two swing doors OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 7.00 m + 0.20 m EXTERNAL BOX WIDTH: 2.50 m FRONT SIDE INTERNAL / EXTERNAL HEIGHT: 2.20 m / 2.40 m REAR SIDE INTERNAL / EXTERNAL HEIGHT: 2.20 m / 2.40 m SIDE PANEL INTERNAL / EXTERNAL HEIGHT: 2.20 m / 2.40 m CAPACITY: 36 m³ WEIGHT: 2,780 KG FLOOR THICKNESS: 3 mm WALL THICKNESS: 3 mm COLOUR: blue Except for errors and/or omissions. The prices shown do not include VAT. Please contact the sales department for an updated comparison of prices and conditions. Nwedpfoxqicgjx Anmok For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the field of selling and purchasing industrial and commercial vehicles, specializing mainly in the waste sector. Specialists in trucks, trailers, and roll-off equipment. With an available fleet of over 50 trucks and more than 150 containers, roll-off bins with and without cranes. E.&O.E. Due to the quantity of advertisements and details provided, Aurora kindly invites you to verify the accuracy of the data listed with our sales staff.

Year of construction: 2001, condition: used, Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible. Nedpjzwfqysfx Anmewk

Year of construction: 2019, condition: used, Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible. Nwsdpfezwgidjx Anmok

Condition: used, Year of construction: 2015, A Röders RXU 1200 DSH and a Röders RXP 500 DSC are available, 1) RXU 1200 DSH, x-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24,000/min, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle interface: HSK 40, connected load: 85kVA, weight: 33t, with paper filter. 2) RXP 500 DSC, x-axis: 425mm, y-axis: 400mm, z-axis: 240mm, spindle speed: 42,000/min, probe: Renishaw, number of tools: 40, spindle interface: HSK 40, with paper filter. An on-site inspection is possible. Nwsdpfszwnzbsx Anmjk

Condition: like new (used), Year of construction: 2015, Manufacturer: OPTIMUM Maschinen Germany GmbH Njdpfx Ansy Ia Uwemjwk Model: F 150 Machine type: 3-axis CNC machining center Serial number: 1521211505 Year of manufacture: 2015 Control: Siemens Sinumerik 828D Travel X/Y/Z axes: approx. 750 / 500 / 500 mm Tool holder: BT40 Spindle power: 12 kW Spindle power S1: 9 kW Total power: 25 kW Power supply: 400 V / 50 Hz T-slot worktable: approx. 800 × 450 mm Equipment: Integrated automatic tool changer Integrated chip conveyor Machine weight: approx. 3,520 kg

Condition: good (used), Year of construction: 1995, Mikron UME 600 Year of manufacture: 1995, Digital control: Heidenhain TNC 407 Spindle stock as per specifications Nedozr T U Aspfx Anmowk X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Spindle speed: 5 - 5000 rpm Quill travel: 90 mm Total power consumption: 9 kW Feed rate range: 0-10,000 mm/min Machine weight: approx. 3260 kg Space requirement: approx. 2200x2800x2000 mm Spindle: 6 kW Vertical milling head with hydraulic tool clamping system SK 40

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Nwjdeztmvvopfx Anmok Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 48800 € 932.08 € 40 -3200 U/min ISO 40 600 x 500 x 400 mm 1000 x 500 mm 3.75 kW 1814 kg 1000 mm/min 8 14 x 63 mm 300 kg 600 mm 500 mm 400 mm 0 - 600 mm/min. 0 - 600 mm/min. 40 - 3200 40 - 3200 +/- 90° ° 100 mm manuell 3,75 kW 1200 x 250 mm 160 - 660 mm Njdpsyrhrqofx Anmjwk 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 400ib Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Y/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Condition: new, machine/vehicle number: Baureihe GSL 180 / Neumaschine, The ZERMA beside-the-press granulators of the GSL series 180/120 to 180/430 have been designed as slow-running machines specifically for injection molding applications. They feature a rotor diameter of 180 mm and working widths from 120 to 430 mm. The rotor is driven directly by a geared motor. The special rotor knives can be resharpened multiple times. Nwjdpoyr I Edefx Anmek Material is fed via a noise-insulated, sandwich-construction feed hopper, which is available in various designs depending on the type of material handling. Depending on the application, the granulators of this series are mounted on either a low or high frame and equipped with an appropriate suction/extraction tray. Combined with a wide range of options, these granulators offer highly flexible use. In addition to the typical advantages of all slow-speed granulators, such as low noise emissions and virtually dust-free regrind, the granulators GSL 180/120 to GSL 180/430 are distinguished above all by their knife, rotor, quick-snap system, and excellent accessibility.

Condition: new, machine/vehicle number: Baureihe GSL 300 / Neumaschine, The GSL series granulators 300/400 to 300/800 are primarily designed for the size reduction of production scrap in injection molding and blow molding applications. In addition to the key benefits of the GSL series, the slow-running granulators GSL 300/400, GSL 300/600, and GSL 300/800 are especially suitable for large-surface parts such as automotive door panels, bumpers, or hollow bodies. Nodpfoyr I Eksx Anmowk The 'V arrangement' of the rotor knives ensures that the pre-shredded material is held in the center of the rotor. This significantly reduces wear on the grinding chamber walls during processing of glass fiber reinforced plastics. Material build-up on the side walls is prevented. Thanks to the staggered arrangement of the rotor discs, only individual knives are engaged at any one time, providing consistently higher cutting force.

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Nwedeztm Daopfx Anmsk Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Comec FRO1000 cross-profile milling machine for the precise machining of cross-profiles and shaped millings on solid timber and wood-based materials. The robust construction and the sturdy milling unit ensure consistently precise profiles in both batch and single-piece production. Technical data: - Working width: approx. 1,000 mm Nwedpoztvxgjfx Anmek - Spindle diameter: 40 mm - Feed: Pneumatic

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Nwsdpfxjiivg So Anmjk Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Condition: new, functionality: fully functional, Year of construction: 2026, roller diameter: 200 mm, roller length: 2,000 mm, working width: 2,000 mm, sheet thickness steel (max.): 8 mm, type of input current: three-phase, working length: 2,000 mm, Hydraulically controlled four-rolls bending machine Make BIKO, model B4 2020 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 2000 mm Top roll diameter: 200 mm Nedpfx Ajd Iclrenmjwk Lower roll diameter: 180 mm Side rolls diameter: 160 mm Guaranteed installed power: 5.4 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,950 kg Length: 3,200mm Width: 1,000mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 1000 mm Rolling capacity (full working width) 5 mm Bending capacity (full working width) 4 mm from pipe diameter 265 mm Standard equipment: Linear guide system for roller movement Extremely wide bearing blocks Needle bearing for the roller rotation Extra heavy double hinged folding release Hardened rolls for high wear protection Hydraulic parallelism system of the side rollers Digital display for the position of the side rolls and the bottom roll cone bending device Control on the swiveling control panel Safety lanyard with emergency stop and CE certification

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls cone bending device Nwsdpfxjcuxp To Anmek Safety trip wire with emergency stop and CE certification Mobile control panel

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Tool milling machine Kunzmann WF 400MA with Heidenhain 3-axis active digital display – in like-new condition, CE-compliant!! Technical data: >> Year of manufacture 2016, machine number 410737 >> Milling table, clamping surface 600 x 375 mm >> 5 T-slots >> Slot width 14 H7 >> Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed rate up to 5 m/min >> Travel distances X/Y/Z: 410/350/450 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg Nwsdeztw I Aepfx Anmek >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor (100%/25% duty cycle) 8.5/16.2 kW Accessories and equipment: >> Heidenhain 3-axis active digital display >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: Offered for sale is a Kunzmann WF 400MA tool milling machine with a 3-axis active digital display from Heidenhain. It proves its qualities daily in workshops, production facilities, and training centers. This universal milling machine is in like-new condition. Furthermore, the machine has hydraulic clamping in both the vertical and horizontal positions. Converting from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm Nwodpfjxukppex Anmok table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: used, Year of construction: 1993, x-travel 0500 mm y-travel 400 mm z-travel 420 mm table-size 800 x 400 mm feed range 1- 3000 mm/min rapid traverse 0,083- 5 m/min Tool bore ISO 40 Nwedpfx Anjyy A Dxsmek turning speed range 20- 4000 U/min main drive DC 5 kW CNC control 355 HH total power requirement 10,9 KW weight of the machine ca. 2300 kg dimensions of the machine ca. 2,5 x 2,5 x 2,0 m CNC milling machine with Heidenhain TNC 355 Control and housing arround working area.