Used Cold Rolling Line for sale (16,460)

Condition: used, Safe Line metal detector Equipped with stainless steel reject flap Fully stainless steel and easy to clean by means of hatches Ijdpfex Nzzzex Af Toib Metal detection diameter: 200 mm Total installation height: 1200 mm See our other listings VMA Wekerom

Condition: refurbished (used), Complete cheese grating line for cheddar or Mozzarella cheese blocks. Cheese blocks are cubed and fed to the Cheese grater then up a conveyor dosed with powder and tumbled Arcall Cheese cutter, transfer conveyor, Urschel CC grater, incline conveyor and tumble mixing drum Can produce 1,000 Kg of grated cheese per hour. A Weigh bagging system can be added to the grated cheese line Iiedpsp T Tghjfx Af Tjb

Condition: good (used), 1 x Carrot Line and Grader system Can also be used for potatoes, onions, beet root and brussel sprouts etc. System will be coming out of production end of May/early June. All equipment has had a full service and checked over during the spring period for the coming year. Haith Screen Bits Remover. The Screen Bit Remover continuously removes broken fragments of crop and debris from the produce flow. Carrots are transferred onto a traveling screen with a set size aperture. As the screen is conveyed forward, two full-width agitators gently move the crop causing any bits and debris to drop on to a waste conveyor below where the produce is taken over the end. The screen and agitator speeds are variably controlled individually to suit the various crop conditions. Grader / sorter Odenberg Titan 2 automatic camera grading system – installed in 2008. Titan 2 Sorter 6002.2, 3-way carrot sorter. The first sorter removes product that is not usable, damaged etc to the waste line. The second sorter removes short carrots, twisted and misshaped which are sent directly to the value tank. All the rejects go through the positive sorting area and the grading operative throws back any product that is fit for value sale. High capacity and low maintenance sorting machine Iodpfxjv I S D Se Af Toib Flexible sorting machine with gentle handling assured Quality control and feedback accessible through intuitive touch screen Consistent long-life accuracy. Grading Station. The grading operatives throw out any unusable product to the waste line via the positive grading area. Two to four graders can operate here depending on the quality of the produce. Wyma Lift Roller Sizing Grader – installed in 2019 The product is divided into five grades. 500g, 0-25mm, this goes to the value tank. 1kg, 25 – 42mm max. Loose min 30 – 45mm max. Lumpers, min 45mm upwards. Oversize. The Wyma Lift Roller Sizer is a diameter grader suitable for a wide range of fruits and vegetables including carrots, potatoes, parsnips, beets, citrus, onions, bulbs, brussel sprouts, rutabaga and other round or tubular products. It is extremely versatile, offering multiple size outputs at high capacity in one machine. It can cater for a large range of product sizes and shapes through a selection of different roller options. Product size ranges, or size bands, are created by adjusting the spacing between the rollers, at defined locations, along the length of the machine. The Lift Roller Sizer is made from stainless steel and food-grade plastic materials. Five Lift Roller Conveyors. All supporting framework available. *Video available on request* Located in Wexford, Ireland. Buyer to collect – machinery will be dismantled and loaded to your vehicle. UKFM2-6653

Condition: excellent (used), Year of construction: 2022, Multihead Weigher & Pouch Bag Filling / Sealing Line. Can mix three different products of different weights in the one pouch bag. Iodpfjvw Egrsx Af Tjib Consisting of the following. 24 head weigher, sus304, 3-mix, 3 top cones, 100 degree flat chute, 2.5L dimple plate, touchscreen, photo sensor Pouch Machine Change Parts Gantry with stairs 3 infeed elevators Ice Viper Printer Set of wash walls to suit 2 x Cross feed conveyors All manuals and spare parts included Can be seen running In excellent condition

Condition: used, Cut-to-length line Pro-Eco with Cassette Type Precision Leveler 60 x .187 x 50,000Lbs (A3789) Maker: Pro-Eco Excellent conditions SPECIFICATIONS: MAX WIDTH 60" MAX THICKNESS 187" MANUFACTURER - PRO-ECO YEAR - 1985, REINSTALLED 2002 WIDTH RANGE - 8" to 60" GAUGE RANGE - .024" to .187" WEIGHT CAPACITY - 50,000# (25 TON) COIL OD - 36" to 72" COIL ID - 19" to 24" SHEET LENGTH - 24" to 168" SHEET WIDTH - 8" to 62" PACK HEIGHT - 30" (INCLUDING DUNNAGE) PACK WEIGHT - 20,000# LINE DIRECTION - RIGHT to LEFT LINE SPEED - 50 to 300 FPM (VARIABLE) LEVELER TYPE - MECHANICAL WEDGE STYLE w/ TWO CASSETTES LINE COMPONENTS: FOUR ARM ENTRY STORAGE TURNSTILE FLOOR LEVEL COIL LOADING CAR CANTILEVERED MANDREL UNCOILER w/ WATER COOLED BRAKE PIVOTING AND TELESCOPING PEELER BLADE ENTRY PINCH ROLLS ROLLER TYPE SIDE GUIDES ENTRY CROP SHEAR SIDE TRIMMER HYDRAULIC SERVO DRIVE (CURRENTLY NOT OPERATIONAL) MECHANICAL STYLE LEVELER FRAME W/ 200 HP MOTOR CASSETTE #1 - 19 ROLL, 2.50" DIAMETER, 5 HI, 7 BACKUP FLIGHTS CASSETTE #2 - 19 ROLL, 1.75" DIAMETER, 5 HI, 7 BACKUP FLIGHTS STRIP INSPECTION AND CARRY-OVER TABLE w/ NON-MARKING ROLLS LOOPING PIT QUADRANT TABLES w/ NON-MARKING ROLLS Iiodpfx Afjthg Die Tob ROLLER TYPE STRIP SQUARING TABLE PRECISION ROLL FEEDER W/ 55 HP MOTOR HIGH SPEED MECHANICAL CUT OFF SHEAR W/ 40 HP MOTOR BLANK INSPECTION CONVEYOR w/ NON-MARKING BELT REJECT BELT CONVEYOR w/ NON-MARKING BELT AND SCRAP CART 14 FOOT AIR FLOAT STACKER w/ SQUARING GUIDES AND END STOP 14 FOOT STACKER LIFT CONVEYOR w/ END DISCHARGE ROLLERS 14 FOOT STACKER RUNOUT CONVEYOR w/ END DISCHARGE ROLLERS OPERATOR CONTROL STATIONS UPDATED AC CONTROLS w/ ALLEN BRADLEY "CONTROL LOGIX" PLC (2006) UPDATED DRIVE CONTROLS w/ SIEMENS "SIMOREG" CONTROLLERS (2006) CLOSED LOOP HYDRAULIC SYSTEM CLOSED LOOP WATER COOLING SYSTEM

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel Isdpfx Afstiy Nte Toib 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: ready for operation (used), functionality: fully functional, Auction of a welding and deburring line, consisting of an URBAN AKS 1610 and an URBAN SV 530! The machine was overhauled in 2024! TECHNICAL DETAILS Corner welding machine URBAN AKS 1610 Welding angle: 30° - 180° Weld seam: High-quality, precise, and uniform Control: PLC control Features: Pneumatic clamping, robust construction Automatic corner cleaning device URBAN SV 530 Function: Automatic corner cleaning device Iisdpfx Asy Szbtof Tob Cleaning tools: Milling and cutting tools Features: Adjustable cleaning parameters Operating voltage: 230/400 V L1, L2, L3, N, PE Power: 3.5 kW Current: 6 A Fuse: 3 x 10 A Control voltage: 24 V DC

Condition: good (used), Max. Roll dia: 1000 mm Max. Roll Length: 5260 mm Max. Roll weight: 16 Tonnes Control: Siemens 810 Iiodpfx Aeq Dmkwjf Tjb

Condition: good (used), functionality: fully functional, Roll Mill 30 HP Iisdpfjy Sz Tvjx Af Tjb for Silver, Copper

Year of construction: 1971, condition: excellent (used), functionality: fully functional, Roll mill CARL WEZEL BW350 Iodey Sz S Ejpfx Af Teib 61 HP Under power

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Iijdpfx Afoxlcp Ns Tob Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Year of construction: 2015, condition: used, W and C Profile Production Line for Sale Designed for the production of road barriers, posts, and fastening elements. Fully equipped line suitable for continuous industrial manufacturing. The line consists of: Iijdpjxhf R Iefx Af Tjb - Two decoilers - Post production line - Parapet (guardrail) production line - Two presses for fastener manufacturing Technical specifications: Length: 17 m Width: 1 m Height: 1 m Motor power: 22 kW Weight: 18 t Year of manufacture: 2015 Manufacturer: Chengxing Machinery (China) Purpose and advantages: This W and C profile production line is designed for manufacturing various road safety components: detachable road barriers, support posts, and fastening parts. The equipment ensures a reliable, stable, and consistent production process. The machine is available for inspection. If you have any further questions, please do not hesitate to contact us.

Condition: like new (used), High-Quality Meltblown Production Line for Nonwovens A complete machine inspection was carried out by the manufacturer's service team on 17.12.2025. Inspection report available. Commissioning at the customer's site can be offered upon request. Operating hours: 80 hours (commissioning only) Price for a new machine: EUR 7,500,000 • Manufacturer: Reifenhäuser GmbH & Co. KG Maschinenfabrik • Model: Reicofil MB 1600 • Year of manufacture: 2021 • Last commissioning: 2022 Technical specifications: • Working width: 1,600 mm • Material: Polypropylene (PP), MFI 230 / 2.16 > 400 g/10 min • Output: Up to 65 kg/h per meter width • Product weight: 10–80 g/m² • Production speed: 5–80 m/min • Die head: MB 1600, 50 h/in • Extruder: RT-1101-1-100, L/D 30 • Heating capacity, rotary beam: 65–172 kW • Winder: contact winder with preset reel change • Max. winding diameter: 1,250 mm • Web width: 1,700 mm • Winding tension: 10–100 N/m Additional equipment and accessories: • 3-component dosing system Iijdpfx Afjx Hx Rnj Teb • 80 mm automatic seat changer • Ultrasonic cleaning system • Pyrolysis unit • Ozone extraction • Cutting knives • Central control panel with touchscreen and data entry

Condition: excellent (used), functionality: fully functional, Drilling machine for turned components Triade Forap I Number of drilling units: 3 Iedoy Styuepfx Af Tsib Drilling depth: approx. 600 mm Arrangement of units: Front left: 4 kW Front right: 4 kW Side: 1.5 kW Feed of front units: hydraulic Hydraulic pump motor power: 1.5 kW

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Isdpfx Ajq H Shcjf Toib Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher.

Condition: used, Included container 28,5 m3 Iodpfxjv Hpn So Af Toib

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts Iiodpfew Smdfjx Af Tjb * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor Iiedpfexw D Udsx Af Tob - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty operations. It is especially used for bending materials up to 10 mm thick. Applications include bending of aluminum sheets, the manufacture of ventilation ducts, advertising panels, machine bodyworks and sheet metal components, and many other similar tasks. All models are equipped with planetary gearbox drive High-strength shafts manufactured from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable top roll Mobile control panel Conical bending roller Centralized lubrication system Precise bending feature via braked motor and planetary gearbox Powered rear roll with up/down movement Top roll support system In compliance with EU Safety Directives (CE Certificate) Isdsx D Dfvopfx Af Tjib User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for mounting profile and pipe bending rolls Profile and pipe bending roll set Motorized lower roll with up/down movement Derlin ringed top roll for Alucobond bending Adjustable speed steps NC Control TECHNICAL SPECIFICATIONS Bending length: 2550 MM Pre-bending: 4/5 MM Bending: 5/6 MM Top & bottom roll diameter: 190 MM Min. bending diameter: 285 MM Main motor power: 4 kW Rear motor power: 1.5 kW Length: 4700 MM Width: 950 MM Height: 1300 MM Weight: 3400 KG

Condition: good (used), Hohner HSB 9000 Digital Booklet Making Line Iiedpfx Afsy Sfbds Tjb The machine is in very good condition and ready for production. Year of manufacture: 2019. Only 0.4 million booklets have been printed. This is one of the newest Hohner models. The entire machine is set up from the control panel. Made in Germany. The ideal machine for efficient booklet production in a digital printing house. Touch panel for quick adjustments and wireless remote control. The machine comes with tools, spare parts, and documentation.

Condition: good (used), GMP Surelam-Pro 500D Roll Laminator Production-ready, This high-quality machine is manufactured in Korea. Description: Isdpfx Asy Sd Txsf Tsib The GMP SURELAM laminator is a professional roll laminator with a working width of 500 mm. This laminator is ideal for a small printing company, advertising agency, or office. This device allows us to laminate a variety of materials thanks to independent heating control of the upper and lower rollers. Electronic lamination process control and two operating modes: manual and automatic, make working with this machine easy and enjoyable, and ensures laminations are always of the highest quality. The laminator offers single- or double-sided lamination options. Includes laminating pouch Technical specifications: – Maximum laminating width: 500 mm – Pouch thickness: 25-500 microns – Lamination speed: 700 mm/min – Pressure adjustment: manual – Temperature control: digital – Power supply: 230 V – Power: 3000 W

Condition: good (used), Horizon VAC-100a + VAC-100m + SPF-200a + FC-200a Booklet Maker Ijdpfxey Sd Sus Af Teib The machine is fully operational and ready for production. Very low mileage. This is one of the newest Horizon models. The entire machine is set up from the control panel. Made in Japan. The line consists of: – Horizon VAC-100a / VAC-100m Max size: 350x500mm Min size: 120x148mm Vacuum feeding 10 shelves Stack height: 55mm Basic weight: 40-270g Power supply: 230V Weight: 310kg/piece Touchscreen control Jam, double-feed, and no-feed sensors Ability to save 9 preset jobs to the machine’s memory Horizon SPF-200A 10.4″ color touchscreen Non-stop operation thanks to the mis-assembly ejection function Max size: 508x356mm; Min size: 180x120mm Max speed: 4500 booklets/hour Weight: 500kg Stitching Wire-folding Two Hohner heads Up to 200 jobs can be saved in the machine’s memory. Additional options include wire feed control and a block stitching module. Horizon FC-200A Cutting thickness 4-5mm 230V power supply Weight 244 kg New trimmer design, stable operation with servo motors, and additional booklet guide. Touch panel for quick format changes. Reset the machine to a different format with a single click. The machine includes: LC-200 delivery, operating tools, spare parts, and documentation.

Year of construction: 2008, condition: excellent (used), functionality: fully functional, - Bar loading warehouse Maximum length of bars that can be loaded: 7500 mm - Bar positioning unit Carriage traverse speed: 0-60 m/min. - Milling unit with 4 electric spindles, 4.5 kW each Tool holder cone: ISO 25 X-axis travel: 240 mm Y-axis travel: 350 mm Z-axis travel: 350 mm - Cutting unit with pneumatic positioning Blade diameter: 550 mm Cutting angles: 45° - 90° - 135° - Automatic unloading Isdpfx Afey S E H Hj Tsib

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, LINE FEATURES Iijdpfjy S E E Nox Af Tob 4-head welding machine FUSION 4H Frame unloading unit First milling module Q-MATIC 1 Serial connection between welding machine and cleaning machine Rotating table Electronic cleaning machine TRIMMER 4A Extraction table Second milling module Q-MATIC 2 Line supervisor laptop Refilling unit Automatic frame unloading

Condition: ready for operation (used), Double Roll Crusher AGJ, Roller Pair Used Machine Roller width: 500 mm Iedpfx Afexnl Hie Tsib Roller diameter: 600 mm Engine power: 18,5 kW RPM: 980/min Weight: 3700 kg