Used Crankshaft for sale (133)

Condition: used, mileage: 4,57,811 km, power: 220 kW (299.12 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2026, color: white, gearing type: automatic, emission class: euro6, loading space volume: 36 m³, loading space length: 6,150 mm, loading space width: 2,470 mm, loading space height: 2,400 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * ANTOS 1830 L MEAT Refrigerated Box with 3 rail systems + tail lift 1 ton. Lredpfx Adsxafc Ujwsg * THERMOKING T-600 R (diesel engine) and 380 V standby cooling * Vehicle number for customer inquiries: 4336 * Engine: Euro VI with OBD-C * Active Brake Assist * Bi-xenon headlights * Rear axle differential lock * Air conditioning * Rear axle air suspension * Lane keeping assistant * Environmental badge (green) * Tail lift * Standard trailer coupling, D40, Rockinger * Full service history * Stability control assistant (ESP) * Front axle air suspension * Additional hot water heater, cab * Trailer brake, 2-line, brake connectors left side * Antos * Air horns, cab roof * Electronic brake system with ABS and ASR * Comfort driver's suspension seat * Gearbox G 211-12/14.93-1.0 * Comfort central locking system * Mercedes PowerShift 3 * Engine brake, standard system * Particulate filter * Central locking system * External sun visor, transparent * Digital tachograph, EU, RPM, ADR * Cruise control * Two-seater * High storage compartment on engine tunnel * Overhead storage flaps above windscreen * AdBlue tank 60 l, left side * Trailer socket 24 V, 15-pin * Roof hatch/ventilation flap * Weight version 18.0 t (7.5/11.5) * Electronic air supply unit * M-cab * M-cab ClassicSpace, 2.30 m, tunnel 320 mm * Engine OM936, R6, 7.7 l, 220 kW (299 hp), 1200 Nm * Wheelbase 4600 mm * Tubeless tyres, 315/70 R 22.5 rear axle * Tubeless tyres, 315/70 R 22.5 front axle/intermediate/lift axle * Headlight cleaning system * Tank 290 l, left, 650 x 565 x 950 mm, aluminium * CB radio pre-fitting, 12 V, DIN slot * Toll system pre-fitting * Attention assistant * Roof cut-out for refrigeration unit (T=500 x H=520 x W=2100) * Fan position, on crankshaft * Smoker’s package * Heavy vehicles from 18 t, on-road * EAPU scope, 1st position * Tail lift (commercial vehicles only) * 2/3 doors No liability for printing or typographical errors Sale to business customers only Errors and prior sale reserved* Modifications, prior sale, and errors expressly reserved. The description serves for vehicle identification and does not constitute a warranty within the meaning of sales law. The purchase contract description is decisive. * TOP SERVICE + QUALITY * We can offer you a LEASING-FINANCING-INSTALLMENT PURCHASE proposal Guarantee insurance possible on request from the insurer * TÜV / UVV tail lift / tachograph inspection and installation of OBU device by our local partners * 30-day export licence plates All export documents available on request * TOLL for Toll Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * ARRIVAL TRAIN STATION: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * ---- Visit us on our website at * Over 200 vehicles in stock at all times

Year of construction: 1981, condition: used, machine/vehicle number: 225, Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of manufacture: 1981 Weight: 11t General / technical data: max. turning length: 125mm max. workpiece diameter: 168mm max. drilling depth: 125mm Lrjdpfxsipu U Uj Adwsg adjustable number of pieces: from 3,4 to 450 sec. working hours: 8.200h working spindle speed: from 90 to 1120 rpm footprint (l x w x h): approx. 4730 x 1700 x 2120mm power supply: 380V / 50Hz Accessories: 7 cross slide 8 longitudinal slides Thread cutting device 4x 2-jaw chuck Ø160mm chuck type: pull chuck with clamping diameter 15 Chuck type: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw chuck Ø160mm Chuck type: Draw chuck with clamping diameter 15 Chuck type: Röhm 1W-406 681 Clamping force 1800 da N Insertion arm over chuck 100mm. The workpiece is fed to the insertion arm by a swivel arm and rotary gripper. Remark: The machine is in very good condition and has very few operating hours. The machine is set up for crankshaft halves for small combustion engines.

Year of construction: 2012, condition: good (used), machine/vehicle number: 770054, For superfinishing of passenger car crankshafts Technical data Workpiece length: max. 1000mm Stroke (OT-UT): 100 mm 3 main bearing devices 2 pin bearing devices with NC stroke adjustment, old generation 1 pin bearing unit with NC orbital adjustment, new generation 1 double thrust face unit (2-stage thrust face machining) Condition Technical quality – good Optical quality – like new Location Germany Ledjiicatopfx Adwsrg Warranty 6 months legal warranty Price On request, FCA Wolfach Available approx. 3 - 6 months from order, depending on the volume

Condition: used, mileage: 2,84,000 km, power: 330 kW (448.67 HP), first registration: 08/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,450 mm, Equipment: ABS, air conditioning, navigation system, parking heater, We are very pleased that our offer has sparked your interest and can assure you in advance that you will be able to purchase a good-value vehicle with a traceable service history from our company! Ledpfx Aevt Ig Hedwjrg HIGHLIGHTS & PACKAGES * O3J Climate Package, with noise and thermal insulation * U0Q Control Code, HDEP Fuel Efficiency Package - FE1 * O3D Safety Package, without anti-roll stabilization * 1256 Equipment Package: Powertrain 2 * O7L Cab interior package: Chrome * O8I Equipment Package: Economy ASSISTANCE SYSTEMS * S5Z Cruise control system * S1X Active Sideguard Assist * Z1H EBS, Wabco * S1O Traffic Sign Assist * B1B Electronic braking system (EPB) with ABS+ASR * S1L Driver assistance system: Attention Assist (drowsiness detection sensor) * S1W Driver assistance system: Autonomous Emergency Brake Assist (Active Brake Assist 5) * G0T Driver assistance system: Predictive Powertrain Control (cruise control with GPS-based transmission program) * S1H Driver assistance system: Lane Keeping Assist * S1D Driver assistance system: Stability Control Assist * FA28 Driver assistance system: Traffic Sign Recognition * B5D Trailer Stabilization Program TSA * S1I Driver assistance system: Distance Control * L1D Driver assistance system: High Beam Assist and Cornering Light * F8W Rain sensor ENGINE, TRANSMISSION & CHASSIS * E7F Remote control for air suspension * G5A Single-plate clutch * O2N Starter Melco 95P65 * U2V Control code, catalyst kit 2 * Z5G Fan position, on the crankshaft * I6X Air suspension, rear axle * C6I Controlled power steering pump * 64203 Differential lock, rear axle * M0E Torque increase, 12th gear * 90220 Air intake behind cab * F3B Cab: steel suspension, comfort * E1T Alternator 100 A, controlled * A3D Rear axle with active lubrication, non-controlled * A2E Rear axle ring gear 440 * M6M Air compressor, 2-stage * M3B Engine 12.8 L - 330 kW inline 6-cylinder diesel (OM 471) * G5G Transmission: Mercedes-Benz PowerShift * C6U Additional stabilizer, rear/pusher axle * G2E Transmission 12-speed, type: G 281-12 * M8D Integrated air intake * M5V Reinforced engine brake * 95020 Engine 12.8 L - 330 kW inline 6-cylinder diesel (OM 471) * A5C Axle ratio i = 2.733 * Z6I Special permit, mandatory for axle transfer * M4X Emission standard EURO 6 * STAB Stabilizer front axle AUDIO & COMMUNICATION * J2U Navigation system * GPS navigation system * J2K Speakers, 2-way system * U3N Control code, navigation map region EU * 42690 Remote query function - Remote Online INTERIOR * D6G Automatic climate control * D8X Low seat box, 40 mm lowered * F5Y A-pillar trim * O1S Interior color: almond beige * O1Z Indirect steering * F2A Floor variant, flat floor * J8Y Preparation for Truck Data Center 7 * J6C Multimedia cockpit, interactive * D5Z Carpet covering, engine tunnel * D7R Overhead storage above windshield with lid * F7X Cab entry: fixed * 17671 Flat cab floor * 33108 Electric sunroof * 44311 Multimedia cockpit, interactive * 47305 Carpet covering on engine tunnel * 47700 Sunblind on side window, driver's door * F1I Cab: L StreamSpace, 2.50 m, flat floor * 51000 Electric window lifters * D3B Lower comfort bunk * LEN5 Multifunction steering wheel * 53707 Seats in cab: Armrests, both sides driver's seat * D1N Seats in cab: Functional passenger seat * D2N Seats in cab: Foldable driver's seat backrest * D7G Storage compartments with lid behind driver and passenger seats * 49584 12V socket in passenger footwell

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Ljdpfxsifpg Ae Adwjrg Field of application: testing of crankshafts. Item condition: used For further technical data please refer to the machine card. Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Wenzel roughness and contour measuring station for crankshafts  Measuring plate made of hard stone length: 3670 mm width: 850 mm Flatness tolerance according to DIN 876/1 Nominal value 48 µm Actual value 32 µm Ident No.: 14280 JFA unwinding trestles Lrsdpfx Adsihillowog Further measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Weipert grinding machine for crankshafts Lrodpjihfrnjfx Adwjg Weipert Grinding bench Center point: Röhm 110 H MK5 machine length: approx. 4400 mm More grinding machines in other sizes - new and used - you will find in our store! International shipping costs on request!

Year of construction: 2009, condition: used, Benier Dough Expert 3-pocket universal industrial divider suitable for a wide range of dough processes. Products such as sandwiches, biscotte, baguettes, rye bread, panettone, brioche and pizza breads can be accurately processed. This industrial machine is accurate, gentle to your dough and easy to operate. The high quality wear free mechanism in the heart of the divider is frequency driven through a crankshaft that accurately synchronizes the dividing action.  year of build 2009 refurbished in year 2020 weight range 3-pocket 250 - 1410 grams max cap 4500 pcs/h variable and precise process speed due to frequency-driven crankshaft operation PLC with touch screen for process control and recipe parameter setting (capacity, dough weight, number of products to be produced, conveyor speed) corrosion-free (stainless steel and synthetic materials in a functional design) Ljdpfx Aekyzk Ujdworg high-quality wear-free mechanism the divider is easy to move and relocate in its original position

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Ledpfxsw Dufio Adwsrg *

Condition: excellent (used), Year of construction: 2013, operating hours: 2,730 h, functionality: fully functional, workpiece weight (max.): 150 kg, clamping length: 1,700 mm, grinding wheel diameter: 660 mm, center height: 270 mm, grinding length: 1,500 mm, 1 pc. used crankshaft & camshaft cylindrical grinding machine Brand: BERCO Model: LYNX 2000 Year of manufacture: 2013 Technical Data Ljdpfeu R Nvuox Adwjrg Max. grinding diameter (plunge grinding): 220 mm Max. grinding diameter (cylindrical grinding): 300 mm Max. workpiece weight between centers: 150 kg Center height above table: 270 mm Distance between centers: 1,700 mm Max. grinding length: 1,500 mm Chuck diameter: 180 mm Tailstock quill travel: 50 mm Max. grinding wheel diameter: 660 mm Min./max. grinding wheel width: 20 / 80 mm Max. circumferential speed: 35 / 80 m/sec Grinding spindle head (X-axis) Axis drive with linear motor - travel: 490 mm Measuring system: optical scale, resolution 0.0001 mm Workpiece headstock (C-axis) Workpiece spindle speed range: 1 - 1,000 rpm Encoder measuring range - resolution: 0.0001 degrees Table (Z-axis) Axis drive with linear motor Measuring system: optical scale - resolution 0.0001 mm Machine dimensions (L x W x H): 5,500 x 2,600 x 2,000 mm Space requirement: approx. 7,500 x 5,000 mm Machine weight: 9,850 kg Accessories: CNC control Siemens 840 D Oil cooler Coolant system with treatment unit

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Lrsdex I Simepfx Adweg Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, turning length 1500 mm connected load 108 kVA Ledpfxox Ik Tws Adwsrg total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, In our opinion, the machine is in good used condition and can be inspected under power by appointment. Lredpfxex Ik Tko Adwjg There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2013, In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Ljdpfx Asx Ik Tdedwsrg Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2005, Distance between centers 3050 mm Center height 280 mm Travel paths: Z-axis 2800 mm X-axis 400 mm U-axis 160 mm W-axis 160 mm Lrsdpfxowz Rg De Adwog Max. workpiece weight 1000 kg Grinding wheel: Outer diameter (new) 1050 mm Max. width 120 mm Bore 304.8 mm Grinding wheel peripheral speed 6-50 RPM Accessories: - Measuring system - Tailstock - Coolant system - Documentation

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance Lredpfx Ajt Uufbodweg safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: good (used), Year 1998 Grinding machine for machining centric or eccentric bearing diameters (also cones) of crankshafts or shaft-like components Control Fanuc Panel i Version with 2 grinding spindles on one tool carrier Use of CBN grinding wheels (nominal Ø400 + Ø450mm - Junker standard bore ring Ø127) with machining with oil Clamping with one-sided chuck and tailstock as counterholder - Grinding range ~500mm Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Components can be retrofitted after consultation for an additional charge with documentation of change parts and tools Fuse for control system and drives included - free location Availability after consultation, warranty excluded Year of Production:1998 Grinding machine for producing of centrical or excentrical Journal diameters (as well as cones) on crankshaft and other shaft components Machine Control Fanuc Panel i Machine set-up with 2 spindles on 1 tool console Lredst Uuf Uopfx Adwjg Usage of CBN Grinding wheels (nomnial Ø400+Ø450mm - Junkernormbohrungsring Ø127) with Oil as coolant set-up with jaws on drive side and centers as tailstock - grinding length ~500mm automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: used, Year of construction: 2001, machine/vehicle number: 467-72, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 630 CNC Pin Grinder Lrsdpfxoxxybps Adwsg crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to

Condition: used, Year of construction: 2004, machine/vehicle number: 467-76, grinding wheel diameter: 400 mm, Landis 3L2 Twin Orbital Pin 180 x 680 CNC Pin Grinder crankshaft length 630 x dia 180mm, 2 grinding spindles (grinding wheel dia 400mm), MARPOSS E82 In-Process grinding wheel balancing system, CNC LANDIS 6400, weight, ca. 16to Ljdpfxoxxx Rps Adwsrg

Condition: excellent (used), Machine fully operational, everything complete. Lrodpfx Adox Ezlrjweg

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Lrjdpfswm Elfox Adwog Max. machining height: 1,100 mm

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Lodpswgm Hksfx Adwerg Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: used, Year of construction: 2017, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Ljdswgndkopfx Adwjrg Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21-axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: used, Year of construction: 2019, operating hours: 17,529 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,529 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) Lrsdpfx Aowgnigsdwog m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500

Condition: used, Year of construction: 2019, operating hours: 17,349 h, turning length: 500 mm, spindle motor power: 30,000 W, General Year of manufacture: 2017 Operating hours: 17,349 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 500 mm Maximum cutting radius mm 200 Stroke over center mm 25 Maximum clamping diameter mm 100 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 602 Longitudinal stroke Z-/W-axis mm 602 / 602 Cross stroke X-axis mm 140 Cross stroke X-/U-axis mm 140 Steady Z3-axis depends on the chuck Workpiece C21/C22 axis degrees 360 Tool Outer diameter mm 230 Tool holder Quick-change system Bearing diameter of tool drum in the front bearing mm 660 * 790 Chuck holder Cylindrical mm 180 Chuck diameter up to mm 260 Workpiece spindle bearing diameter in the front bearing mm 170 Lsdpfx Ajwgnfuedwjrg Guidance system for machining units Rolling guides with rollers, size 45 Feed drives Cross slide adjustment W-axis, Z-axis 100% duty cycle Nm 18 / 18 Tool feed U-axis, X-axis 100% duty cycle Nm 18 / 18 Steady Z3-axis 100% duty cycle Nm 10.5 Vise right Z4-axis 100% duty cycle Nm 10.5 Circular feed workpiece C21- axis, C22-axis 100% duty cycle Nm 18 / 18 Axis speed Feed/rapid traverse speed longitudinal W-, Z-, and Z3-axes m/min 0 - 40 Feed/rapid traverse speed transverse U-axis, X-axis m/min 0 - 20 Feed/rapid traverse speed Z3-axis (steady rest) m/min 0 - 40 Circular feed of workpiece C21- axis, C22-axis rpm 0 - 60 Cutter drive Power per unit (nominal / maximum) kW 15 / 30 Cutting speed m/min 120 - 255 Tool torque Nm 1500