Used Deep Hole Boring Machine for sale (66,591)

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Bodpfxjvca Rcs Aktjlp Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Bedpfsx E Ingsx Aktolp Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider Bedpewh Rp Ejfx Aktolp - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: refurbished (used), Year of construction: 2017, BUCK TBFZ 3000 CNC incl. tools and clamping wedges The machine has been comprehensively overhauled and modernized. Conversion to Heidenhain iTNC530 including completely new control cabinet Travel: X-3000 mm, Y-1.500 mm, Z-1500 mm Z1: 500 mm A-axis: +/- 20° Depth of drilling in a single pass Z: 1.500 mm Drill depth by readjusting Z1: 2.000 mm Blsdpfx Asz Ntr Ioktop Drilling performance with single-lip internal thread drilling tools: 3-40 mm diameter NC rotary table 360° B-axis: 2.500 x 2.300 mm max. Tischladung: 25.000 kg Internal coolant supply (IKZ): 70/100 bar Spindle drive power at 60%: 20.5 kW Express travel X/Y/Z: 15.000 mm/min Spindle speed: 0-6,000 RPM Control: Heidenhain iTNC530 tool holder: SK50 Space requirements: approx. 8.5 m x 8.5 m x 3.5 m machine weight: approx. 24,000 kg max. table load: 25.000 kg

Condition: used, Used machine Drilling unit with 21 spindles Drilling distance 32 mm, max. 640 mm, by moving the workpieces max. 2656 mm with oil brake cylinder Stroke max. 130 mm Motor 2.5 HP Blodpfx Akew I Um Hetop Machine dimensions approx. 1450 x 1100 x 1600 mm Weight approx. 240 kg Availability: approx. 2 weeks after receipt of order Location: Hochheim Hochheim

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Blsdpfx Akeuddimotjp Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: excellent (used), functionality: fully functional, TRIADE FR3 S Drilling Machines for Turned Parts Bledpfx Aoznmlysktop Number of drilling units: 3 1. Lower unit: 3 kW 2. Upper unit: 1.5 kW 3. Lower unit: 1.1 kW (can also be used for screwing in sleeves/screws) Pneumatic material clamping system Application: Drilling of legs, turned parts, curtain rail components Weight: 1200 kg Dimensions: 115 x 128 x 180 cm (H)

Condition: repair required (used), Year of construction: 1996, For sale: an IXION deep-hole drilling machine, model Zyklen TL 601. Unfortunately, the machine is currently experiencing electrical problems. Constants need to be re-programmed by a technician, and the buffer battery needs to be replaced. A new LCD display was recently installed. Display: NEW LED Machine No.: 950192 Year of manufacture: 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel distances + Quill Tl 601 (Z) 600 mm + Drilling unit, vertical (Y) 300 mm + Table, transverse (Table surface 1200 mm x 600 mm) (X) 700 mm + In the drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + Holder SK 40 according to DIN + Draw bolt 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + at 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW + Spindle speed Directly programmable 100-4000 rpm Working performance: + Drilling capacity in steel 2312 D 32 mm + Thread cutting M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT. We can deliver and commission the machine. All prices plus VAT. Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Bledsh Dpv Rjpfx Aktjp Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours?

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Bedpsxgu R Iofx Aktjlp Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: like new (used), The machine is completely overhauled and therefore as good as new! Technical specifications Drilling method : single-lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 420 mm Max. workpiece length 420 mm Manufacturer: TBT / SFT Bledefgwlbspfx Aktop New electrics and new controls!

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Bedpfx Aez H Dwnjktolp Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Drilling machine for turned components Triade Bledpeyabz Iefx Aktsp Number of drilling units: 3 Drilling depth: 100 mm per side

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Bljdpfjw Ekfuex Aktop Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm Bedjv A Uw Djpfx Aktolp W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Bljdpfx Akowyup Totjp Height: 3400mm Weight: 6500kg

Year of construction: 1986, condition: used, Technical details: Bedpjw Dz Tasfx Aktolp core drilling diameter max.: 16-65 mm bore depth: 600 mm total power requirement: 73 kW weight of the machine ca.: 6 t

Condition: used, functionality: fully functional, Dubus multi-spindle drilling machine. Full specifications coming soon. Bljdez Irn Repfx Aktjp

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 Bjdpfew I Unwjx Aktjlp serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Availability: short term Location: Röllbach

Condition: good (used), Year of construction: 2004, Deep hole drilling machine TBT Varioflex MD 30-1, serial number 106254-11, manufactured in 2004, 70 kW, SIEMENS SINUMERIK 840D control system, tool changer, chip conveyor, paper band filter system, with extensive drilling toolset, drilling slide stroke 2,200 mm, drilling depth 1,500 mm, weight approximately 15,000 kg. Bljdpjz Iccfsfx Aktsp

Condition: like new (used), Year of construction: 2025, GANNOMAT "JUNIOR 323" FRAME DOWEL AND SLOT MORTISING MACHINE Complete in standard configuration as per price list 01/22/D with: - Precision collet chuck for ER 40 collets Ø 3–26 mm, including collets Ø 10 / 13 / 16 / 20 - Motor 1.5 kW, 2800 rpm - Positioning via digital counter - Pneumatic 2-level positioning adjustment (0–100 mm) - Max. drilling depth: 150 mm - Precision indexing rail with 12 mm pitch, featuring: - Center detent and lateral adjustment 320 mm - 2 pneumatic safety clamping cylinders - Complete fence system consisting of: Bedpjxdttisfx Aktolp • 1 center stop and 1 stop for oversized frames • 1 round stop bar approx. 850 mm long (can be mirrored from left to right) • 2 flip stops - Tiltable slot mortising device with 2 program cams (400V, 3Ph, 50Hz, 1.5kW) - Extraction hood Ø 80 mm, dust-tested - Central mitre stop 45° - Pair of auxiliary workpiece supports, pivotable (left and right) - Drill head holder - 3-spindle drilling head, 32 mm pitch (can be rotated 90°) - Chassis with 4 wheels for easy machine movement Availability: Short-term – immediately –

Condition: refurbished (used), 2-spindle deep hole drilling machine under retrofit, completely overhauled, like new after conversion. Blodpfxox E U S Eo Aktsp Technical Data Drilling system: ELB system Number of drilling spindles: 2 Min. drilling diameter: 1 mm Max. drilling diameter: 8 mm Max. drilling depth: 300 mm Nominal workpiece diameter range: 5–30 mm

Condition: good (used), functionality: fully functional, drilling depth: 1,000 mm, FOR SALE: TBT T 30 – 1000 KT Deep Hole Drilling Machine High-quality German engineering for precision drilling Overview: Available for purchase is a robust and reliable deep hole drilling machine from the renowned German manufacturer TBT Tiefbohrtechnik. As a global leader in deep hole drilling technology, TBT machines provide unmatched precision for long-hole operations. Technical Specifications: Model: T 30 – 1000 KT Year of Manufacture: 1977 Max Drilling Depth: 1000 mm Drilling Diameter: approx. 4 – 30 mm Rated Power: approx. 20 kW Operating Voltage: 380 V / 50 Hz Machine Type: Knee-table (KT) design for flexible clamping. Key Benefits: Solid Construction: German heavy-duty build ensures superior stability and accuracy. High Performance: The 20 kW motor provides ample power for various metal alloys. Bjdoy Rvc Aspfx Aktjlp Versatile Application: Ideal for drilling shafts, molds, and other long workpieces.

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U Bodpfx Akjzxlv Eetjlp spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, chuck diameter: Ø 315 mm 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pices Coolant system HEIDENHAIN PT 880 4-axis DRO Boring bar for deep-hole drilling Drilling head for deep-hole drilling Infinitely variable boring-bar feed Various accessories *

Condition: good (used), Year of construction: 1997, TBT M 200-2-850 Deep Hole Drilling Machine Technical Data Drilling spindles: 2 Drilling slide stroke: 850 mm Drilling process: Single-lip drilling Feed rate: 20–500 mm/min Control: Sinumerik 805 M Drilling depth with plunging spindle: 120 mm Drilling depth with sealing housing: 400 mm Drilling depth with sealing housing and steady rest: 350 mm Rapid traverse in NC operation: 12 m/min Feed force: 1.5 kN Feed motor: 2.2 Nm at 3000 min-1 Tailstock: Motor: 0.75 kW at 1000 min-1 Tailstock: Spindle speed: 500 min-1 Tailstock: Stroke max.: 200 mm Control panel: Siemens COROS OP15 Connection, weight, and dimensions Blodpfxs Abbc Ds Aktop Dimensions L × W × H: 4600 × 2500 × 2100 mm Transport weight: 3200 kg Electrical connection: 400 V / 50 Hz Connected power: 18 kW Equipment and scope of delivery Two drilling spindles for single-lip drilling Tailstock Siemens control panel COROS OP15 Units as shown in the photos Related accessories as shown in the photos Technical specifications are subject to change without notice. Errors and prior sale are reserved. The characteristics agreed upon in the purchase contract and the agreed scope of delivery shall apply.

Condition: ready for operation (used), -Drill diameter: 5~25 mm -Drilling depth: 1000 mm -Tailstock -Tank Blsdpfjdgpltox Aktep -Pump -Filter