Used Deep Hole Boring Machine for sale (65,734)

Condition: used, CNC Gantry-Type Boring and Milling Machine ANAYAK Type HVM-3800-P Bed type milling machine, structure similar to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 ("Refurbished 2025") The machine will be completely workshop overhauled in 2025 and can then be inspected in storage at 37235 Hessisch Lichtenau. Travel distances: X: 3,200 mm, Y: 1,200 mm, Z: 1,500 mm Table size: 3,800 x 1,200 mm T-slots: 8 pieces, 22 mm, spacing 130 mm Table load: max. 25 tons (stationary table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar: DIN 69872-B) Spindle speed: 60 – 4,000 rpm, stepless Feed rate: up to 10,000 mm/min, stepless Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes – B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF-spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor positioned between the gantry bed and the machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Installation area (L x W): approx. 1,000 x 700 cm Installation height: approx. 410 cm Weight (total): approx. 33 tons Good condition Pedoxcgtgepfx Aa Dsgg

Condition: good (used), Year of construction: 1986, functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm Podsx Sv Nrepfx Aa Djgg distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Year of construction: 2019, condition: used, functionality: fully functional, MAKE: Bragonzi MODEL: 110 CNC CATEGORY: Retrofitted Boring Machine RETROFIT YEAR: 2019 CNC CONTROL: Siemens 840D MACHINE WEIGHT: 28,000 kg Machine Dimensions Length: 4,500 mm Width: 4,200 mm Height: 4,100 mm Total Connected Load: 45 kW Spindle Boring Spindle Diameter: Ø 110 mm Spindle Nose (mounting type): ISO 50-7388/1 – DIN 69871, double drive keys Milling Cutter Mounting Diameter: Ø 221.44 mm Speeds and Feeds Continuous Spindle Speed Range: 15 – 596 rpm 50 – 2,000 rpm Spindle Motor Power: 22 kW Feed Rate X / Y / Z / W axes (infinitely variable): 2 – 5,000 mm/min Rapid Traverse X / Y / Z / W axes: 10,000 mm/min Axes Travels X Axis (longitudinal): 2,500 mm Y Axis (vertical): 1,500 mm Z Axis (transversal): 1,300 mm W Axis (quill): 550 mm Rotary Table Usable Pallet Dimensions: 1,040 x 1,350 mm Maximum Load: 4,000 kg Max. Rapid Rotation Speed: 3 rpm Tool Magazine Tool Magazine Capacity: 60 stations Tool Holder Type: ISO 50-7388/1 taper Max. Tool Diameter with Adjacent Stations (occupied/free): Ø 138 / Ø 280 mm Max. Tool Length (without taper): 400 mm Max. Tool Weight: 25 kg Pgjdpfx Asyb Rqzea Deg Machine complete with accessories

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Metric US Standard Table length 4250 mm Table width 4250 mm Table load 130.000 V-axis feed 3000 mm B-axis rotation 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Pedpfx Aaotwllfj Dogg Dimensions (estimate) length 8000 mm width 4250 mm height 2000 mm weight 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Year of construction: 1990, condition: used, Weigl ER - 1500 Brief description: Start hole eroding machines Waldmann & Description: Immediately available from site : Start hole eroding machines Waldmann & Weigl Type ER - 1500 Year of manufacture 1990 table size 500 x 500 mm installation height 400 mm twist drill 0,1 - 20 mm taps M 2 - M 20 electrodes 1 - 12 mm drilling machine Interkrenn Economy 280 S height adjustment 700 mm throat 180 mm quill stroke 80 mm speed range 120 - 2580 rpm Tool holder MK 2 Pedpfx Aasnzh Ive Dsgg

Condition: used, Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle Pgedpfxjd Ac Ipj Aa Deg -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

Condition: used, Quill for jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Stroke: 60 mm -in: a wooden box -Dimensions: 390/340/H170 mm -Weight: 15.8 kg Pgedpfsfc R D Iex Aa Dsg

Condition: used, Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, Pgodpfx Asd Tk Stsa Dsg -Table dimensions: 700 x 405 mm -Travel: Z 330 mm/Y 410 mm/X 630 mm -Quill stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

Year of construction: 2007, condition: ready for operation (used), Main Drive Pedpfex Imtaox Aa Degg Number of axis 5 Movement X-Axis Movement 3500 mm Z-Axis Movement 1500 mm Y-Axis Movement 1200 mm This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. Application Types Other Machine Tools

Condition: good (used), Year of construction: 1995, 1 used hydraulic punching machine Manufacturer: Mubea Type: KLH 500 / 610 Year of manufacture: 1995 Podpfowxy Dgex Aa Djgg - Punching force: 50 tons - Stroke: 60 mm - Punches up to Ø 30 mm in 15 mm, Ø 50 mm in 9 mm, Ø 100 mm in 4.5 mm - Throat depth: 610 mm - with support table

Condition: excellent (used), Single-sided oscillating drilling machine BACCI MOA Pgjdpfex Ih Ryox Aa Deg One drilling unit Oscillation range up to 120 mm Tool rotation speed: 9500 rpm Maximum drilling depth: 80 mm Manual table height adjustment up/down Table angle adjustment +/- 20° Main motor power: 2.2 kW

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 13,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 1,000 mm, travel distance W-axis: 1,200 mm, MAKE: PAMA MODEL: SPEEDRAM 4 CATEGORY: Floor type CNC boring machine YEAR OF MANUFACTURE: 1997 CNC CONTROL: Siemens Sinumerik 840C Spindle Spindle taper: ISO 50 Spindle diameter: Ø 160 mm Spindle speed range: 2 ÷ 1,600 rpm Spindle motor power: 100 kW Coolant through spindle (CTS) Work Capacity X axis (column longitudinal travel): 13,000 mm Y axis (head vertical travel): 5,000 mm Psdpjyari Aefx Aa Dsgg Z axis (head cross travel / RAM): 1,000 mm W axis (quill travel): 1,200 mm V axis (table cross travel): 3,000 mm RAM section dimensions: 440 x 500 mm Machine equipped with Heidenhain linear scales on all axes Table & Floor Plates Rotary table dimensions: 4,000 x 4,000 mm Rotary table load capacity: 80 t Continuous rotary table positioning: 360,000 positions, minimum indexing angle 0.001° Number of floor plates: 2 Each floor plate size: 6,000 x 2,500 mm Total floor plate dimensions: 6,000 x 2,500 mm Accessories Chip conveyor Coolant tank with high-pressure pump for through-spindle coolant (CTS) 1 x 90° milling head, indexing 2.5° (C axis) Spindle oil chiller and hydraulic unit Manuals and electrical diagrams

Condition: used, functionality: limited functionality, conventional milling machine - Documentation available: Yes - CE certificate present: No - Serial number: 6029 - FYD 32 JM Year of manufacture: 1989 - Control: Conventional - Spindle head: Vertical - Power [kW]: 12.8 - Number of axes: 3 - X-axis travel [mm]: 900 - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 450 - Table length [mm]: 1250 - Table width [mm]: 315 - Tool holder: ISO40 - Min. spindle speed [rpm]: 56 Podpfsycu Nkox Aa Djgg - Max. spindle speed [rpm]: 1800 - Transport dimensions: 1720mm x 2170mm x 2200mm;

Condition: used, Machine type: Horizontal table-type boring machine Manufacturer: CORNAO Model: BS65N S1893 Year of manufacture: 1983 Condition: Used Pgodpfx Asui H U Nja Deg Motor power: 6.5 kW Voltage: 400 V Required air pressure: 5 bar Weight: 1,900 kg Control system: A.I.F

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Pedpfx Asx Rhlcja Djgg Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) Pgsdpfxjxz Aygo Aa Djg * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, table load: 6,000 kg, spindle diameter: 110 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 1,120 rpm, total height: 4,300 mm, total length: 7,200 mm, total width: 4,600 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 800 mm, type of input current: AC, spindle stroke: 800 mm, overall weight: 26,000 kg, year of last overhaul: 2020, A Union Gera BFT 110/6 horizontal boring mill is for sale The machine was built around 1980 and was overhauled by us in 2009/2010 and has been in our care since then. The scope of the overhaul includes the following: - Electrical system almost completely renewed - New control cabinet incl. Siemens S7-200 PLC control system - New drive technology Siemens Simodrive 611, feed motors Siemens 1FK7 - Heidenhain TNC 124 line control + electronic handwheel - Heidenhain length measuring systems on X, Y and Z axes - Heidenhein angle measuring device in B-axis (rotary table) - Spindle drive three-phase asynchronous with DC brake electronics - Renewal / overhaul of all hydraulic components - New KGT in X and Y axes - Overhaul of the drive systems of all feed axes - All axles were rescraped - Lubrication systems of axes and headstock overhauled - New bearings and overhaul of the gear components of the headstock For further technical details see photos or on request. Equipment of the machine: - Heidenhain TNC 124 line control + electronic handwheel - Facing slide (U-axis) - Electric tool clamp SK 50 The sale is due to capacity reasons. The machine is fully functional and immediately available. It achieves production accuracies according to the manufacturer's protocol. Technical documentation is available. The machine is fully functional and, by prior arrangement, can be inspected under power. The offer is subject to our terms and conditions of business and delivery. Subject to errors and prior sale. As a warranty is excluded for the purchase of used machines, we recommend that our our customers to inspect the machine before making a purchase. As is customary with used machines, payment is made by bank transfer before delivery of the goods. bank transfer. Pgsdpfx Aeu U Hvwoa Deg Dismantling, relocation, installation, commissioning and geometric adjustment at the new location, can be carried out by us on request. We will be happy to submit a separate offer for this. Delivery of the machine to other EU countries is also possible on request.

Condition: good (used), used boring machine Brand: Juaristi Model: MDR 75 Weight: 5600kg Pedpfsh Ryc Hex Aa Dsgg Motor power: 10KW 2-axis digital FAGOR. Shank diameter: 75mm Longitudinal course (X axis): 1,150mm Vertical course (Y axis): 700mm Column transversal course (Axis W): 800mm Cane exit course (Z axis): 500mm Table surface: 900x700mm Speeds: 22-1055rpm Number of advances: 9 of 0.04-3 mm/rev.

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. Pgjdpsizxbijfx Aa Dsg - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

Condition: used, Year of construction: 1989, functionality: fully functional, Stegherr Type FD, a boring machine for dowel holes in window frames — designed for precise drilling of dowel holes in wooden window profiles. Professional FP machine for milling, drilling, and processing of wooden frames, windows, and doors. Very robust German quality Suitable for precision work (corner joints, dowel holes, etc.) Convenient stops and adjustment options Fully operational. Sturdy metal housing Psdpfx Aaoya Alzo Dsgg Ideal for joinery workshops or woodworkers seeking accurate results. In used condition.

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Speed 2800 rpm Drilling table size 650 x 330 mm Cross adjustment 300 mm Depth adjustment 150 mm Height adjustment 170 mm Table height 880 mm Pjdpfx Aaovzrame Dogg Weight approx. 280 kg

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: 0166890274834, control type: manual, degree of automation: manual, actuation type: hydraulic, punching force: 50 t, punching diameter: 100 mm, stroke length: 60 mm, throat depth: 650 mm, sheet thickness steel (max.): 15 mm, overall weight: 1,700 kg, total length: 1,500 mm, total width: 650 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), input voltage: 220 V, input current: 26 A, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2023, Equipment: foot remote control, Muhr & Bender (Mubea) Punching Machine KLH 500/610 – incl. punching tools Used punching machine from Muhr & Bender (Mubea), model KLH 500/610, Made in West Germany. Condition: The machine has been professionally inspected by a machinery technician and is in very good, fully operational condition. All functions have been tested. Technical data (all information without guarantee): – Punching force: approx. 500 kN / 50 t – Max. punching diameter: up to approx. Ø 100 mm (e.g. Ø 30 mm in 15 mm steel) – Max. sheet thickness (steel): approx. 15 mm – Throat depth: approx. 610 mm – Stroke: approx. 60 mm – Drive: hydraulic, manual/conventional control with foot switch – Connection: 220/380 V, 3~, 50 Hz – Power: approx. 7.5 kW – Rated current: 26.3 A / 15.2 A Scope of delivery: – Muhr & Bender (Mubea) KLH 500/610 punching machine – including corresponding punching tools (scope as per photos) Important notes: – The stated price applies to self-collection only. – Dismantling, loading, and transport are the exclusive responsibility and at the expense of the buyer. – Sale is from used stock, without guarantee or warranty. Pedjx Dtp Rjpfx Aa Dogg Inspection possible by appointment. I am happy to answer further questions.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, CNC T TYPE BORING MACHINE CASTEL RED X TRAVEL 4000MM Psdpfxsx U Dfyj Aa Djgg Y TRAVEL 2000MM Z TRAVEL 700MM(SPINDLE) W TRAVEL 2500MM(COLUMN) ROTERY TABLE 1800X 1600MM (HYDROSTATIC) TABLE INDEXING 0.001° TABLE LOADIONG CAPACITY 12TON CNC SELCA1200

Year of construction: 2020, operating hours: 2,421 h, condition: ready for operation (used), travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 940 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, number of axes: 4, Control Unit Brand HEIDENHAIN Model iTNC 640 Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Pgjdpjx D Hhmjfx Aa Djg Workpiece Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: used, Technical details: Pgedpfx Asxt El Aea Deg spindle diameter: 120 mm x-travel: 1250 mm y-travel: 1250 mm z-travel: 800 mm W-axis (spindle longitudinal): 600 mm Speed of boring spindles: 1- 2000 U/min. spindle taper ISO: 50 table surface area: 1000 x 1000 mm total power requirement: 55 kW weight of the machine ca.: 18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment *