Used Deep Hole Boring Machine for sale (66,916)

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Bodpfx Asx Tp Ahendedi Year: 2005

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Bjdpfx Asz Irfvondsdi Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Inspection of the machine and further information are available on request.

Condition: excellent (used), Drilling machine for turned components Triade Bdsdpfx Aneyabz Iodei Number of drilling units: 3 Drilling depth: 100 mm per side

Condition: good (used), functionality: fully functional, drilling depth: 1,000 mm, FOR SALE: TBT T 30 – 1000 KT Deep Hole Drilling Machine High-quality German engineering for precision drilling Overview: Available for purchase is a robust and reliable deep hole drilling machine from the renowned German manufacturer TBT Tiefbohrtechnik. As a global leader in deep hole drilling technology, TBT machines provide unmatched precision for long-hole operations. Technical Specifications: Model: T 30 – 1000 KT Year of Manufacture: 1977 Max Drilling Depth: 1000 mm Drilling Diameter: approx. 4 – 30 mm Rated Power: approx. 20 kW Operating Voltage: 380 V / 50 Hz Machine Type: Knee-table (KT) design for flexible clamping. Key Benefits: Solid Construction: German heavy-duty build ensures superior stability and accuracy. High Performance: The 20 kW motor provides ample power for various metal alloys. Versatile Application: Ideal for drilling shafts, molds, and other long workpieces. Bodey Rvc Aspfx Andsdi

Condition: good (used), functionality: fully functional, Swing type row drilling machine, 19 spindles, pneumatic clamping Bedpfx Ansx Rbklsdedi

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer: Knuth Model: VH F1 Machine type: Milling machine Machining process: Shank milling Bjdo Ad Iuxepfx Andedi MACHINE DETAILS Length: 1,500 mm Width: 1,000 mm Height: 2,000 mm Weight: 700 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, drilling depth: 1,250 mm, feed length X-axis: 1,700 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, workpiece weight (max.): 6,000 kg, travel distance X-axis: 1,700 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 4,200 rpm, drilling capacity: 30 mm, Equipment: rotational speed infinitely variable, - HEIDENHAIN TNC 620 control unit - Electronic handwheel - Table dimensions: 1000 x 1000 mm - Manual table changing system with ZERO POINT table - Table rotation around B-axis: 360,000 positions/revolution Bedpfx Anjzixyrodedi - Table tilt around A-axis: +/- 22.5° - Deep-hole drilling spindle: 11 kW / 6000 RPM - Milling spindle: ISO 40 / 13 kW / 6000 RPM - Tool changer: ISO 40, 24 positions - Smoke extraction system: AR FILTRAZIONI - CE marking

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in very good condition! Bodpfsq A S Eksx Andodi Deep hole drilling machine type TBM 120-2000 Drilling system BTA Min. drilling diameter D 35 mm Max. solid drilling D 130 mm Max. counterboring D 170 mm Main spindle block with two-stage gearbox -Drive Ax AC motor 37 kW with brake for spindle locking 1200-1500 rpm -Drill spindle block with two-stage gearbox 50-500 rpm, 450-1200 rpm, electrically switchable. Optional rotating / stationary tool. Main spindle box (tailstock) with two-stage gear electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck. Main and drill spindle speed continuously adjustable Machine bed as welded construction Guideways in linear roller design size 65 -Drill carriage movement via ball screw, gear and servo motor 3 kW Rapid traverse max. 3000 mm/min Maximum feed rate: 1000 mm/in. Hydraulically attachable drill bushing holder 2 x attachable steady rests 2 x roller pre-centering devices D20-100 mm 2 x Boza drilling range D 8-200 mm with chip chute and suction pump Scraper conveyor -1-axis CNC control PS 100 SFT for controlling and monitoring the drilling cycle Torque monitoring of the drilling spindle and feed rate in % painting: blue/gray, RAL 5015/7035

Condition: excellent (used), drilling depth: 1,000 mm, overall weight: 20,000 kg, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 380 mm, drill diameter: 40 mm, rotational speed (max.): 4,200 rpm, table length: 1,000 mm, table width: 800 mm, table load: 9,000 kg, feed length W-axis: 500 mm, Equipment: rotational speed infinitely variable, IMSA DEEP HOLE DRILLING MACHINE, MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS 1250 TRANSVERSE AXIS (MILLING SPINDLE) 380 mm TRANSVERSE HEAD TRAVEL 500 mm VERTICAL TRAVEL 1000 mm MAXIMUM DRILLING DEPTH 1000 mm MAXIMUM DRILLING SPINDLE SPEED 4200 RPM MAXIMUM DRILLING DIAMETER 40 mm MAXIMUM MILLING SPINDLE SPEED 4000 RPM MAXIMUM THREADING SIZE M 40 MAXIMUM MILLING DIAMETER 65 mm SPINDLE TRAVEL 380 mm Bdsdpfxoytff Do Andsi ROTARY TABLE DIMENSIONS 1000x800 MAXIMUM WEIGHT WITH STATIONARY TABLE 9000 KG MAXIMUM WEIGHT WITH ROTATING TABLE 4000 KG TOTAL MACHINE WEIGHT 20,000 KG

Condition: good (used), functionality: fully functional, Row drilling machine SCHEER, 21 spindles, non-swiveling Bdodpfoxlt R Rsx Andoi

Condition: used, Year of construction: 1975, used hole line drilling machine Model Scheer DB 20 table size 1400 x 630 mm 1 drill beam a 21-spindle, Bedpfx Aneri R Haodsdi 32 mm pitch height adjustment 40-100 mm Spindle distance max 640 mm, Working length 700 mm per cycle by moving the workpieces max. 2656 mm throat 550 mm Motor 1.8 KW 1 stop rail with immersion stops Weight approx. 240 kg

Condition: reconditioned (used), -Drill diameter: 5~25 mm -Drilling depth: 1500 mm -Tailstock -Tank Bdjdpfshuil Rox Andei -Pump -Filter

Condition: good (used), Year of construction: 1997, TBT M 200-2-850 Deep Hole Drilling Machine Technical Data Drilling spindles: 2 Drilling slide stroke: 850 mm Drilling process: Single-lip drilling Feed rate: 20–500 mm/min Control: Sinumerik 805 M Drilling depth with plunging spindle: 120 mm Drilling depth with sealing housing: 400 mm Drilling depth with sealing housing and steady rest: 350 mm Rapid traverse in NC operation: 12 m/min Feed force: 1.5 kN Feed motor: 2.2 Nm at 3000 min-1 Tailstock: Motor: 0.75 kW at 1000 min-1 Tailstock: Spindle speed: 500 min-1 Tailstock: Stroke max.: 200 mm Control panel: Siemens COROS OP15 Connection, weight, and dimensions Dimensions L × W × H: 4600 × 2500 × 2100 mm Transport weight: 3200 kg Electrical connection: 400 V / 50 Hz Connected power: 18 kW Equipment and scope of delivery Two drilling spindles for single-lip drilling Tailstock Siemens control panel COROS OP15 Bdodo Abbc Djpfx Andji Units as shown in the photos Related accessories as shown in the photos Technical specifications are subject to change without notice. Errors and prior sale are reserved. The characteristics agreed upon in the purchase contract and the agreed scope of delivery shall apply.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10142 Manufacturer: TIBO Type: M10-250NC Year of construction: 2002 Type of control: CNC-Steuerung Control: Siemens Sinumerik 802D Storage location: Halberstadt Country of origin: Deutschland Drilling diameter: 1-13 mm Bore Depth: 250 mm Drilling spindle speed: 11.000 RPM X-Travel: 300 mm Y-Travel: 210 mm Z-Travel: 250 mm Machine weight: 2,5 t Further information: Bdsdps Ahmuaefx Andei - With equipment

Condition: good (used), - Drilling diameter: 5-30 mm Bodpfx Ane Dcz Dsdodi - Drilling depth: 750~900 mm - Modifications according to customer requirements

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Bedpfx Aneuddimodedi Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm - Drilling depth: 750 mm - Filter Bsdpfx Anoxzz Hsdjdi - Pump

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 Bdedpfx Aou Itk Rsndoi 900 - 1200 mm SDR26 Original MSA drawings are also included. The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Bsdexgu R Iopfx Andsdi Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, IMSA DRILLING MACHINE Model MF1100BBLL 6P Year 2010 Control unit: SELCA 4045 Bsdjz An Tnspfx Andedi X-axis travel: 2200 Y-axis travel: 1000 Table length: 1000 Table width: 1200 Maximum workpiece size (length x width x height): D.2100 x H.1300 Table surface: Tapped holes Maximum workpiece weight: 10000 Spindle speed: 4000 Spindle connection: ISO 40 Torque (continuous / 10 min): 1200 Nm Number of tools: 108 6-position pallet changer MACHINE EQUIPPED WITH A LANCE CHANGER AND TOOL CHANGER FOR MILLING HEAD MACHINE IN EXCELLENT CONDITION AVAILABLE FOR INSPECTION WHILE IN OPERATION

Condition: used, TOS W100A - Horizontal Boring and Milling Machine The W100A is one of the most successful models from TOS Varnsdorf and represents the latest version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile, and easy to operate and maintain. Ideal for single and small batch production with high reliability and comparatively low costs. - Classic design with a fixed column - Extendable spindle - Cross-traveling, rotatable work table - Integrated faceplate support in the spindle head - Option to use long drill rods with support from the drill support - Hardened and ground guide rails - Central lubrication - Position indicator The machine is suitable for drilling, milling, facing, and threading, as well as general machining operations on large workpieces. Technical data Spindle head: - Spindle diameter: 100 mm - Spindle connection: ISO 50 - Spindle travel (Z): 900 mm - Spindle center height above the table (Y): 0 - 1120 mm - Distance between faceplate and support bearing: 2800 mm - Faceplate diameter: 600 mm - Centering hole diameter in the table plate: 280 H6 mm - Centering hole depth: 8 mm - Max. facing diameter: 900 mm T-slots: - Faceplate, number/size/pitch: 2 / 20 H12 / 335 mm - Slide, number/size/pitch: 2 / 16 H12 / 150 mm Table: - Table cross travel (X): 1600 mm - Table longitudinal travel (W): 1250 mm - Clamping area: 1250 × 1250 mm - T-slots, number/size/pitch: 9 / 22 mm / 160/80 mm - Centering hole diameter in the table: 180 H6 mm - Centering hole depth in the table: 6 mm - Max. workpiece weight: 3000 kg - Tailstock slide travel: 1000 mm Speed: Bedps Ahg Dtofx Andjdi - Number of spindle speed steps: 23 - Spindle speed range: 7.1 – 1120 rpm - Number of faceplate speed steps: 16 - Faceplate speed range: 7.1 - 224 rpm - Max. torque of the spindle at speed: 3350 / 7.1 - 78.5 / 1120 Nm/rpm Feeds: - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 18 - 900 mm/min - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 25 - 1400 mm/min Rapid traverses: - Spindle, spindle head, table & tool slide: 2800 mm/min - Table rotation: 1 rpm - Tailstock bearing: 696 mm/min Threads: - Metric threads, number/range: 18 / 0.25 – 12 mm - Inch threads, number/range: 18 / 120 - 2.5 threads/1" Electrical data: - Main motor power: 11 kW - Total power consumption: 15 kW - Operating voltage: 3x 400 V / 50 Hz Dimensions & weights: - Machine dimensions WxHxD: approx. 6020 × 3000 x 3500 mm - Machine weight: approx. 14000 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, drilling depth: 2,250 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 1,600 mm, table width: 1,300 mm, table load: 20,000 kg, Deep Hole Drilling, Milling and Tapping Machine 5 linear axes X, Y, Y1, Z, W Rotary table axis B Equipped with 3D CAD simulation, WISE PLUS system, electrical cabinet cooling, and fume extraction system. Capacity Gun drilling capacity: 40 mm Table X-axis stroke: 2000 mm Ram Y-axis stroke: 1500 mm Column Z-axis stroke: 700 mm Spindle taper: ISO 50 – DIN 69871 Motor power: 22 / 33 kW Table size: 1600 × 1300 mm Technical Specifications Drilling diameter range: Ø 5 – Ø 40 mm Maximum drilling depth: 2250 mm Milling capacity with cutting tools up to: Ø 60 mm Drilling axis inclination: W -15° / +25° Milling capacity: 400 cm³/min Filtration and cooling system tank capacity: 2000 L Maximum pressure: 80 bar Direct gun drilling with guide bushings: up to Ø 20 mm Rotary table load capacity: 20,000 kg Positioning: 360,000 positions Bodpfxeyuc Rte Andsdi 9 T-slots 18 H12 P=140 Positioning accuracy: ± 0.2 sec Linear Axes X: 2000 mm Y: 1500 mm Z: 700 mm W: 1630 mm

Condition: excellent (used), Year of construction: 1987, Slot drilling machine Manufacturer: Ganner Type: Junion LBM 320 Year of manufacture: 1987 Power: 1.5 kW 2-lever operation Table size: 850 x 360 mm Bdsdpfs Ahg I Tsx Andsi Drill chuck: 20 mm Dowel drilling device with 24 detents Workpiece stop Center stop pneumatic feed Pneumatic workpiece clamps, 2 pcs.

Condition: used, Year of construction: 2002, Technical details: x-Travel: 600 mm table cross travel (Y-axis): 500 mm w-axis: 250 mm control: Ixion TL-1 x-travel: 600 mm y-travel: 500 mm z-travel: 350 mm drilling depth in one stroke: 600 mm number of spindle speeds: 300 - 6000 /100 - 1600 U/min drill capacity in steel: 3 - 25 mm table surface area: 900 x 500 mm table load: 2000 kg connected load: 10 kVA weight of the machine ca.: 4 t dimension machine approx.LxWxH: 2,0 x 2,8 x 1,9 m The AUERBACH IXION AX1-TL is an industrial CNC deep-hole drilling machine designed for the precise machining of workpieces, particularly for producing deep holes with small to medium diameters. The machine is equipped with a powerful high-pressure coolant system and is designed for deep-hole drilling with single-lip carbide drills from Ø 3 to 25 mm. The coolant system has a tank capacity of 600 litres, a maximum coolant pressure of 90 bar and a maximum flow rate of 40 l/min. This ensures reliable cooling and efficient chip removal even during deep-hole drilling operations. Bdodpfx Anjz Dt Sijdei The worktable measures 900 × 500 mm and is designed for a maximum table load of 2,000 kg. Four longitudinal T-slots provide flexible and secure workpiece clamping. The main spindle is driven by a 4.0 kW AC motor. Two belt-driven speed ranges provide programmable spindle speeds of 300–6,000 rpm and 100–1,600 rpm, allowing the machine to be adapted to different tool diameters and machining requirements. *

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 Bdjdpfx Aeywnr Nendei OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity