Used Deep Hole Boring Machine for sale (93,484)

Condition: used, Year of construction: 1993, Control Sinumerik 805 turning speeds 45 - 6000 U/min Solid drill diameter / 0 weight of the machine ca. 20 t Type of machine: deep hole drilling machine Kedpfx Aovvx Hijabedu Model / Type: TB 2 15 30001KT Year of construction: 1993 Manufacturer: hole Machine number: 221-3000-2093 Machine weight: approx. 20,000 kg Machine footprint: Width = approx. 3800mm Length = approx. 13500mm Height = approx. 3100mm Drilling length: approx. 3500mm Drilling capacity: drill 45mm / drill out 80mm Spindle speed range: 45 - 6000 rpm Control: Siemens Sinumerik 805 Hamül – coordinate table Type: KT 8.5 – 10.10 Clamping surface: approx. 1100 mm x 980 mm Travel: Y - axis: approx. 800mm Traverse path X - axis: approx. 500mm 7 pieces clamping - T - grooves: 18 mm Special equipment: 1 piece Fibroplan NC - rotary indexing table Type: NC 1.05 Permissible transport load in horizontal use 2500 kg With manual chuck Forkardt F 630 The NC rotary indexing table can be adjusted manually in the longitudinal and transverse directions relative to the clamping table and is clamped hydraulically. 1 piece chips - centrifuge Type: VZ5A from CEPA Drum capacity: 80 liters Loading weight max. 100 kg Drum - Ø: 600 mm Speed: 1000 rpm 1 additional pump for large drill Ø 1 piece Bosch radial piston pump no.: Suitable for lip drills (internal cooling, chips run outwards) Suitable for BTA drills with screw-on heads (internal cooling, chips run inwards)

Year of construction: 1986, condition: used, Technical details: core drilling diameter max.: 16-65 mm bore depth: 600 mm total power requirement: 73 kW Ksdpfsw Dz Tajx Aabedu weight of the machine ca.: 6 t

Condition: new, Year of construction: 2024, Technical specs CNC – 1100 Kdodpfxou Nyxwj Aabeu Control Syntec 21MA-E Drive system YASKAWA servo drive Main motor 7,5/11 Kw Spindle speed till 7000 Rpm Max drilling dept 1000 mm Drilling diameter 3 till 30 mm X stroke 1000 mm Y stroke 800 mm Z stroke 1000 mm cutting feed 0-300 mm/min inner hole accuracy 0.005mm Surface roughness of the hole Ra 3.2um spindle speed 7000 Rpm X servo motor 2.3Kw Y servo motor 3.0 Kw Z servo motor 2.3 Kw oil pump motor 5,5 Kw oil pressure 21 bar Filtration precision 20 um table loade 7000 kg machine weight 10 ton machine power 34 Kw. Capacity of cutting oil tank 800L Machine size 4,8 x 3,8 x 2.6 meter installation on request. price free on truck Rotterdam.

Condition: excellent (used), DETEL M9 Pneumatic Drilling Machine Pneumatic feed of the unit Adjustable drilling depth Kdedpfsxnzxbex Aabou Pneumatic material clamping Capable of vertical and horizontal operation Head with 9 spindles Spindle pitch: 32 mm Spindle motor: 1.1 kW

Condition: ready for operation (used), empty load weight: 6,000 kg, total width: 2,350 mm, total height: 2,450 mm, Type: FCN 540 gundrilling, high precision deep hole drilling movement of drillinghead: 0 600 mm Kodpjxgv I Iofx Aabodu movement of table (X-movement): 0 800 mm max drillingdepth: 800 mm Y-travel: 600 mm Z-travel: 450 mm table: 1100 x 600 mm Heidenhain control including Filtra high pressure cooling through spindle including tools total power: 16 kW Max drilling dia: 4-20 mm Speed: 0 > 12 000 rpm Power on drillingspindle: 3,7 kW Total length: 3800 mm Numbre of drillingheads: 1x

Condition: used, used, good conditionmake Ayentype D-41HAmachine no. 52396motor 0.75 kWnumber of spindles 4 pieceswall-mounted machinespace requirement approx. 1000 mm x 300 mm x 800 mmweight approx. 70 kgtotal connected load 0.75 kWstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Ksdpfx Aevwfrbeabedu

Condition: used, usedmake Rapidnumber of spindles 3 pieceswall machineupright projection approx. 500 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in as-is condition as inspected,without guarantee and warranty Kodpfxevwfmrj Aabsdu

Condition: used, used, top condition, hardly run manufactured by Ayen type ED 08-3 motor 0.6 kW number of spindles 3 piece wall machine folding hand operation stand range ca. 500 mm drill chuck Konus MK 1 required space ca. l x w x h mm 1100 x 300 x 1000 located in 97447 Gerolzhofen sale in current condition - free on truck - Kdedpfxevwgd Se Aabeu

Condition: new, Catalog number M0297 – For the production of customized furniture – Drilling horizontally, vertically, and at an angle in wood-based panels and solid wood – 1500 mm measuring frame Kdsdpfx Ajxbzkwoabsu – Set of spacers included – Brand new machine TECHNICAL SPECIFICATIONS - Number of spindles: 23 - Distance between spindles: 32 mm - Total interaxial distance: 704 mm - Maximum tool diameter: 40 mm - Maximum drilling depth: 65 mm - Max. size of workpiece: 740x3000x200 mm - Working table height: 860 mm - Table dimensions: 949x350 mm - Drilling head inclination: 0–90° - 2 independent pneumatic cylinders - Spindle speed: 2,800 rpm - Motor: 1.5 kW - Working pressure: 6/8 bar - Dust extraction port diameter: 80 mm - Machine packaging dimensions: 1115 x 950 x 1050 mm - Frame packaging dimensions: 1500x120x60 mm - Net/Gross weight: 271 kg / 301 kg Net price: 29,900 PLN Net price: 7,050 EUR, depending on the exchange rate 4.25 EUR (Prices may be subject to change with significant fluctuations) PRODUCT FEATURES The Maggi MS 704 is a multi-spindle drilling machine designed for fast production of customized furniture. The MS 704 is a compact machine capable of handling the complete production process, from drilling cabinet bodies to assembling flip-down fronts and system drawers of any brand. This drill enables comprehensive execution of all required holes in any technology: cam fittings, dowels, connectors, pilot holes for runners, shelf supports, hinge cups, and mounting holes for slides and actuators. The working table width without removing the side stops is 740 mm, so you can drill oversized cabinet components with ease. The machine features a patented 1500 mm measuring frame, allowing work independently of the 32 mm system. This gives you the flexibility to process workpieces up to 3000 mm in length. A new concept in furniture component drilling allows for quick material processing without the need for retooling. The measuring frame is a fixed part of the machine. Contrary to conventional drilling machines, the main operational axis is perpendicular to the spindle head, not parallel. The MS 704 is additionally equipped with height adjustment for the pressure beam, allowing you to process material up to 200 mm thick. The clamps are powered by independent circuits and are equipped with valves enabling safe operation—one clamp can be switched off when working with smaller elements. The MS 704 comes standard with a drill bit magazine and a set of spacers for positioning elements along the axis parallel to the spindle head.

Condition: used, BLX 130 – mașină de alezat (boring machine). Mașină de alezat BLX 130 📌 Date generale Model: BLX 130 Tip echipament: Mașină de alezat si frezat orizontal . Utilizare tipică: Prelucrare de mare precizie a componentelor voluminoase (corpuri de utilaje, matrițe, componente pentru energie, structuri sudate etc.) 📐 Capacități de lucru (cursă pe axe) AxaCursă (mm)Descriere X10.000 mmCursa longitudinală (deplasarea mesei pe lungime); indică o capacitate de prelucrare a pieselor mari, lungi (ex: carcase, șasiuri) Kedpfx Aajw Hpxcsbsdu Y3.000 mmCursa verticală a capului de alezat (ridicare/coborâre pe coloana principală) Z1.000 mmCursa transversală a capului de alezat (mișcare înainte/înapoi față de piesă) W1.000 mmCursa pinolei (bară de alezat) – avansul axial al sculei (esențial la alezare profundă) ⚙️ În mașinile de alezat, W este mișcarea de avans axial a barei de alezat (boring bar), care poate ieși sau intra din capul principal, independent de axa Z. ⚙️ Caracteristici structurale (tipice la această clasă de mașini) ComponentăSpecificații (tipice pentru clasa BLX 130) Diametru pinolă (bară alezare)130 mm (de aici vine „BLX 130”) Sistem de ghidajGhidaje prismatice sau liniare, pe axele X/Y Cap standard de alezat + opțional cap universal sau cap unghiularPutere motor principal30–50 kW (în funcție de variantă)Turații ax principal10 – 3.000 rpm (reglaj variabil, transmisie cu cutie automată sau servomotor)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1974, Mitsubishi Floor Borer MAF 200/135 Year 1974 Fully Operational X Axis 10,000 mm Y Axis 3000 mm Z Axis 600 mm W axis 1,000mm Spindle diameter 200 mm Borer Diameter 135mm Kedpfx Ajxmr Aujabsdu Max. spindle speed 810 rpm Spindle motor power 37 kW Table length 1,600 mm Table width 2,100 mm Table Load 15,000 kg Length x width x height (1750.0 × 2667.0 × 300.0) Weight 55,000 kg Immediate Delivery

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Kdedpfx Ajwkir Doabsu Storage location: Nattheim

Condition: used, CNC Travelling Column Drilling and Milling Machine ANAYAK Type HVM-3800-P Kdsdjxcgtgjpfx Aabou Bed milling machine, design similar to a plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 Travel (X/Y/Z): 3200 mm / 1200 mm / 1500 mm Table size: 3800 x 1200 mm T-slots: 8 pieces, 22 mm width, 130 mm pitch Table load capacity: max. 25 tons (fixed table - virtually unlimited load) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60-4,000 rpm, infinitely variable Feed rate: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power supply: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head, fully automatic swivelling in two 45° planes - B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless measuring probe (probe and receiver not included) - Additional HF spindle 18,000 rpm - for mounting - Free-standing electrical cabinet - Chip conveyor positioned between the travelling column bed and machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic power unit - Operating manuals with circuit diagrams Machine footprint: L x W approx. 1,000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 tons Good condition Available immediately, ex location Kassel, loaded free of charge

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Universal dowel boring machine with a swiveling drilling unit with fully automatic control with 2 safety pneumatic clamps Drilling gearbox motor 2.2 kW with 21 spindles Spindle pitch 32 mm with built-in oil damping Height adjustment 80 mm Ksdpfxsw I Ukrj Aabsdu Drilling depth 80 mm With chassis Weight 420 kg Availability: short-term Location: Flörsheim

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Kedpfx Aaoxpww Aobjdu Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Kdodpfxjxphm Uj Aabou Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: refurbished (used), Year of construction: 1974, Forest CNF 160 CNC Boring and Milling machine (1974, retrofitted in 2004) Machine – CNC Axes: X (Column Saddle travel) 12,500 mm, Y (Headstock Saddle Vertical travel) 3,500 mm, Z (Boring Shaft travel) 1,250 mm, W (Quill travel) 1,000 mm, W+Z (Cumulative travel) 2,250 mm. Rotary Table – CNC Axes: W2 (Table travel) 3,200 mm, B (Table rotation) 0–360°. Rotary Table Surface: 2,500 x 3,500 mm. Rapid Feed Axes: X max. 5,000 mm/min, Y max. 5,000 mm/min, Z max. 3,000 mm/min, W max. 3,000 mm/min, W2 max. 2,000 mm/min, B max. 1 rot/min. Work Feed Axes: X 1–2,000 mm/min, Y 1–2,000 mm/min, Z 1–1,000 mm/min, W 1–1,000 mm/min, W2 1–200 mm/min, B 0.1–1 rot/min. Milling Spindle Range (S – Gearbox with 4 mechanical ranges): Range #1 2.5–80 rpm, Range #2 80–160 rpm, Range #3 160–320 rpm, Range #2: 320 - 630 rpm. Boring shaft taper bore: ISO 50, Boring shaft diameter: 160 mm. FANUC 18M Contouring Numeric Control. FANUC made feed axes motors. FANUC made spindle motor. FANUC made drive system for axes and spindle motors. Kdsdpfx Aajxnc Rlsbju Overall size: W x H x L = 14,000 x 10,000 x 20,000mm. Machine weight: approx - 85,000 kg. Oil Chiller: Schimpke Model DK38-V from 1999. Coolant System: Yes. Chip Conveyor: No

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Tiltable drilling unit 45°-90°-45° - Extraction connection 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit tiltable to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre stop - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Kdsdpfsxcmv Usx Aabou Storage location: Nattheim

Year of construction: 2020, operating hours: 10,245 h, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 640 Main Drive Number of axis 4 Movement X-Axis Movement 1250 mm Y-Axis Movement 1100 mm Z-Axis Movement 940 mm W-Axis Movement 710 mm Workpiece Workpiece weight 3000 kg This 4-axis TOS Varnsdorf WHQ 10 CNC boring machine was manufactured in 2020. It features a spindle diameter of 100 mm, ISO 50 taper, and spindle speeds up to 2500 rpm. The table can handle weights up to 3000 kg and includes a 40-position tool changer. Currently operational, though "Y" axis calibration is needed. Consider the opportunity to buy this TOS Varnsdorf WHQ 10 CNC boring machine. Contact us for more information about this machine. Application Types Kdsdpfx Aoxirlzjabsu Other Machine Tools

Condition: used, Year of construction: 1992, Number of spindles per row of holes: 16 Kdjdpfewv Nb Nsx Aabou Number of horizontal spindles: 5 Cup hinge drilling head: yes Drill pitch: 32 mm Hold-down device: yes / pneumatic Power consumption: 2.2 kW Drilling unit: swivelling

Year of construction: 2012, condition: excellent (used), YASDA YBM Vi40 CNC jig boring machine / machining center machine in perfect condition Kjdpfxspqx H Te Aabedu incl. accessories (see photos) For the complete photo gallery: See attached PDF file (from page 4) TECHNICAL DATA Travels X-axis: 900 mm Y axis: 500 mm Z axis: 450 mm Distance from the table surface to the spindle tip: 100 to 550 °. Rotary table diameter: 400 mm Pallet loading capacity: 200 kg Table surface configuration: 44-M12 thread C axis: 360 ° Table tilt axis movement range (B axis): +- 110 ° Distance between center of tilt axis and rotary table: 0 mm Rotary axis (C axis): 100 rpm Max. rotation of the inclination axis: 20 rpm Motor for rotary axis: 4,2 kW Motor for inclination axis: 4,5 kW Spindle type: SA40-24`000-18,5 Spindle speed range: 100 - 24`000 rpm Spindle speed range programming: Programming by direct input of a 5-digit S-command Number of spindle speed ranges: 1 Type of spindle conical bore: HSK-63A Inner diameter of spindle bearing: 65 mm diameter Rapid traverse Speed: X,Y,Z axis: 20`000 rpm Feed rate: X,Y,Z axis: Max. 5000 rpm C-axis: 100 rpm B axis: 20 rpm Smallest input increment: 0.0001 mm/deg Automatic tool changer: 60 tools Selection method: Any selection Tool shank type: HSK-63 A Max. tool diameter Tool diameter: 100 mm Max. tool diameter Tool diameter at full setting: 70 mm Max. Tool length: 250 mm Max. Tool weight: 7 kg Tool balance weight: within G2.5 Machine dimensions: 3220 x 3885 x 3515 mm Machine weight: 15`000 kg No responsibility is taken for the accuracy, completeness and timeliness of the information.

Condition: good (used), Year of construction: 2004, Steuerung: Siemens 840-D Verfahrweg X: 6000 mm Verfahrweg Y: 3000 mm Verfahrweg Z: 1000 mm Verfahrweg W: 700 mm Spindeldurchmesser: 150 mm Spindeldrehzahl: bis zu 2800 U/min Kdjdpjxn R Ncofx Aabeu Spindelleistung: 51 kW Werkzeugwechsler: 80 Werkzeuge Vertikalfräskopf CNC-Rundtischgröße: 2000 x 2500 mm Tischverfahrweg V: 1500 mm Tischtragkraft: 25 t 2 Stück Bodenplatten Späneförderer Automatischer Kopfwechsler KF-D4 vertikaler Einachsen-Fräskopf, 2,5° programmierbar

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Kdodpfxjw Tri Ns Aabsu

Condition: used, Year of construction: 2010, Technical data: - Wescott drill chuck 0-20 mm - Cross travel 250 mm - Depth travel 215 mm - Height adjustment 165 mm - Swiveling drilling unit 45°-90°-45° - Extraction port 100 mm - Table size 600 x 320 mm - Working height 870 mm - Motor 2.2 kW (3.0 HP) / 400 V - Speed 2840 rpm - Single-lever operation - Drilling unit swivels to both sides - Dowel drilling device with 4 index positions: 16-22-25-32 mm - Height adjustment via handwheel - Eccentric clamp - Extendable table extension - Mitre fence - Dimensions L=1160, W=750, H=1080 mm - Weight 260 kg Storage location: Nattheim Ksdpfx Aajxcmv Ijbsdu

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: Kdjdpoxnlflefx Aabju - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.