Used Edge Polishing Machine for sale (93,234)

Condition: used, Year of construction: 2010, functionality: fully functional, feed rate X-axis: 12 m/min, total length: 4,500 mm, workpiece height (max.): 60 mm, total width: 1,200 mm, edge thickness (max.): 10 mm, height adjustment type: mechanical, power: 11 kW (14.96 HP), Max. edge thickness: 10 mm Max. panel thickness: 60 mm Max. roll material thickness: 3 mm Max. feed speed: 12 m/min Manual height adjustment Granulate glue system: glue pot below Quick-change glue pot: Yes Strip magazine: Yes Jointing milling unit: Yes Cut-off saw unit: 2 motors Flush/radius trimming Scraper unit: profile scraper, flat scraper, Yes Buffing unit: Yes Itodew Av E Iopfx Aabjn Version: right-hand machine Machine dimensions: approx. 4,500 mm x 1,200 mm Control: FORMAT 4 E-MOTION Price plus VAT Machine is still in operation and can be tested at any time.

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Iedpfxew Tfw He Aabjtn Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, OTT Tornado Top Edge Banding Machine in Excellent Condition PU glue pot with release agent, also suitable for EVA adhesives. We had the entire machine recalibrated in September 2024. The glue unit was replaced. The results are perfect with transparent adhesive and incredible with white panels using white adhesive. The machine runs perfectly and without any problems. Technical specifications: Edge thickness: 0.4 - 8 mm Panel thickness: 8 - 40 mm Minimum panel length: 150 mm Minimum panel width: 70 mm Feed speed: 14 m/min Pre-milling unit: with 2 HF motors, 2.3 kW, 12,000 rpm Cross-cutting unit: with 2 HF motors, 0.3 kW, 12,000 rpm Flush trimming unit: with 2 HF motors, 0.7 kW, 12,000 rpm Fine trimming unit: with 2 HF motors, 0.3 kW, 12,000 rpm Corner rounding unit Scraper blade Buffing unit Triple spraying Total power: 17.5 kW Dimensions: Length: 6180 mm Width: 1770 mm mm Iedpfov Sm Hcox Aabetn Weight: 3100 kg - Available immediately -

Year of construction: 2005, condition: good (used), machine/vehicle number: 412060, Offer 23001 Itsdpfx Aaji Ab Unsbjn Technical data: - Barrel width 1 - 15 mm - Cutter head with indexable inserts - barrel angle 30° - 37,5 - 45° - 60 ° - Drive 220 V / 1100 Watt - space requirement approx. W 450 x D 300 x H 350 mm - weight approx. 20 kg - transport case

Condition: new, functionality: fully functional, total length: 3,950 mm, total width: 1,220 mm, total height: 1,610 mm, overall weight: 1,900 kg, input frequency: 50 Hz, input voltage: 400 V, Fully automatic large-format edge polishing machine with CNC control and pivoting milling/polishing unit for finishing sawn or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for the processing of composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently retrieved via the integrated material library, based on the material to be processed and the desired surface finish. A tool recommendation and the corresponding setup for the specific operation are also displayed. The high precision of the polishing table significantly reduces the formation of streaks during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Itjdpfxoxd Si As Aabsn Specific features: - CNC control with material library - Machine body and front stop - Milling/polishing unit - Working area - Multifunctional table - Tools Technical data*: Material thickness (0°/45°/60°): 2 - 120/85/60 mm Material length: 20 - 3,050 mm (with turnover) up to 6,100 mm Table width: 525 mm Pivot range: 0° - +63° Milling depth (0°/45°/60°): 0.05 - 1.5/3/3 mm Spindle speed: 6,000 - 12,000 rpm Feed speed: 0.1 - 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 inserts) Tool: Not included *Subject to material tests, depending on material type, tool equipment, and surface finish Scope of delivery: - 1 operating manual Item no. 0175200

Condition: ready for operation (used), - double grinding and plishing machine - 1,5 kW - speed 1420 U/min - working hight is 600 mm - conical shaft Itjdpfx Asdz Uzbeabon

Condition: excellent (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 17E000332104800, 1. AUTOMATIC EDGEBANDING MACHINE Model GTM 4/3 – GRIGGIO The automatic edgebanding machine model GTM 4/3, manufactured by the Italian company GRIGGIO, is a new model launched in 2017, replacing the previous GB 4/3 model. It features a modern concept designed for straight panel edgebanding with PVC and ABS materials. The machine is equipped with the following working units: a) Gluing unit for hot-melt adhesive, featuring rapid heating and a fully Teflon-coated tank for easy cleaning. b) Pressure unit for bonding the edging to the panel – equipped with three rollers: the first is a large-diameter driven roller, while the remaining two are idler rollers with opposing tapers. c) End trimming unit with high-frequency motors designed to trim the overhanging edging flush with the panel at both the front and rear ends at a 90º angle • Installed power: 0.38 kW • Blade speed: 12,000 rpm d) Top & bottom trimming unit with two independent high-frequency motors for removal of excess edging from the top and bottom of the panel • Motor power: 0.55 kW e) Scraper unit for optimal finishing of 2 mm PVC or ABS edge banding applied to the panel edge • Supplied with a pair of knives for use with 2 mm ABS edging f) Buffing unit • Two independent motors for cleaning/polishing the edge banding • Installed power: 0.19 kW • Equipped with 100 mm diameter brushes Maximum panel thickness: 45 mm Minimum panel width: 90 mm Minimum panel length: 200 mm Feed speed: 9.5 m/min Edgebanding overhang (top + bottom): 4 mm (2+2) Pneumatic system pressure: 6 bar Frequency inverter: 200 Hz for motors, enabling 12,000 rpm rotational speed General features: • The machine frame is constructed from a single-piece, high-rigidity steel sheet. • Panel feed system is of the caterpillar type, with skids covered with high-adhesion rubber. • The skids move on dual steel guides – one round and one flat, both hardened and ground, ensuring straight movement and resistance to lateral forces from the working groups. • Upper pressure unit made of aluminum, featuring rubber pressure wheels mounted on bearings, ensures improved linear piece movement. Included spare parts kit (in machine price): - 2 upper rubber pressure rollers - 1 rubber roller for end trimming unit - 2 cotton buffing discs - 5 rubber pads for feed conveyor track Itodpfow Tkl Nsx Aabon - 4 adhesive pot heating elements - 1 temperature probe EXW price: €10,000 (excluded VAT) Manufactured in EU Excellent condition No pre-milling unit Operating hours: 300 h

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Features and technical data: DESCRIPTION Grinding unit can be swiveled by handwheel Ijdpfxswkbcbs Aabetn The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation Oscillating sanding belt with separate geared motor for improved sanding results Oscillation can be switched on as required Sanding shoe with graphite coating for longer belt life Height-adjustable sanding table allows use of the full belt width Auxiliary table for sanding radii with integrated extraction openings Spring-loaded belt tension automatically compensates for belt length variations With adjustable stops, ideally suited for veneer sanding Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Length (product) approx. 1700mm Width/Depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Drive power Oscillation motor power 0.11kW Work table(s) Table length 950mm Table width 450mm Table height adjustment 110mm Electrical data Connection voltage 400V Network frequency 50Hz Grinding unit Abrasive belt length 2640mm Abrasive belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Swivel range of sanding unit 0 – 45° with undercarriage Availability: short-term Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: C-261-04-2523, feed rate X-axis: 9,000 m/min, saw blade diameter: 100 mm, rotational speed (max.): 12,000 rpm, Submitting a bid obliges you to collect the item by the deadline of 14.10.2025! TECHNICAL DETAILS Edge Processing Edge type: Straight edges Edge material: Cut-to-size strips, lip cuts, coil material Feed speed: 9 m/min Edge material thickness: 0.4–3.0 mm Lip thickness: 0.4–3.0 mm Edge material height: 55 mm Coil diameter: 800 mm Rotation speed: 12,000 rpm Max. tool dimensions: 100 × 62 × 30 mm Extraction port Ø: 120 mm Workpiece Data Workpiece thickness: 8–50 mm Positioning accuracy: 0.1 mm Edge Banding Edge type: Straight edges Edge material: Coil material Max. tape cut: 3 × 30 mm or 0.8 × 45 mm Operating pressure: 6 bar Ijdpfexhgk Aox Aabetn Edge Glue Applicator Rotation speed: up to 1,800 rpm End Trimming Unit Motor speed: 12,000 rpm Saw blade diameter: 100 mm Cutting width: 2.6 mm Bore diameter: 32 mm Workpiece thickness: 45 mm Max. edge material height: 3 mm Edge material angle: 0–15° Edge material cross-section: 135 mm² Flush Trim Unit Rotation speed: 12,000 rpm Max. workpiece thickness: 8–50 mm Max. edge thickness: 3 mm Straight tools: 2 × WPL milling cutter Ø 50 × 12 × 16 mm, z = 4 Combination tools r = 3 mm: 2 × Trimmer Ø 56 × 50 × 12 × 16 mm, z = 4 MACHINE DETAILS Electrical Data Voltage: 400 V Frequency: 50 Hz Fuse protection: 16 A Control voltage: 24 V

Year of construction: 1977, condition: used, machine/vehicle number: 11 U, Technical data: - Speeds: 850 to 12,000 rpm - Flexible shaft approx. 2 m Itodpfx Aaewy Ulzsbjn - Mobile undercarriage - Suitable for grinding and polishing tools - Drive: 380 V / 1.0 HP - Space requirements approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg - Mobile undercarriage

Condition: used, Year of construction: 2008, machine/vehicle number: AA/H113802, SECOND-HAND EDGE BANDER MACHINE SCM MOD. OLIMPIC 500K "T-E" - (CE) - Pre milling unit - Gluing unit with pre-melter - End trimming unit with double blade - Trimming unit - Edge scraping unit - Glue scraping unit - Brushing unit - Year 2008 (CE) Ijdpor Iynbjfx Aabetn

Condition: new, Year of construction: 2021, Table polishing machine / flat polishing machine for parts up to 3000mm length. With one or two polishing units. Basic machine and control cabinet new, polishing units used but completely overhauled with new polishing motor. Isdpsg D Rfmofx Aabotn

Condition: used, Year of construction: 2001, functionality: fully functional, Used, fully functional OTT PACIFIC for sale! Machine length: 6.30 m! Iedpjxc Hhkofx Aabetn

Condition: new, Year of construction: 2025, New machine Year of manufacture 2025 Edge sanding machine with integrated dual conveyor feed system for solid wood parts, veneered edges, and curves, featuring oscillation of the entire sanding unit. Itedpfxew Tfx De Aabjn Processing of solid and veneered edges either manually or with automatic feeding: - On the veneer sanding side, along the two stop plates (with infeed stop including integrated extraction slots and fine adjustment according to removal scale) onto the elastic sanding pad (oscillating for uniform use of the graphite lining, including grit compensation adjustment and belt tension relief via two deflection rollers), with infeed stop extension, table size 1180 x 325 mm. Manual processing of straight and curved solid wood parts: - On the solid wood sanding side against the continuous, glide-backed sanding belt support, table size 1180 x 325 mm including miter fence with scale. - On the front side with an optionally quick-mountable semicircular table (with dust extraction holes) against the rubberized belt drive roller Ø 90 mm, support radius 300 mm. - On the drive roller, optionally with a quickly mountable auxiliary cast iron table (with dust extraction holes) 400 x 500 mm on an oscillating spindle for use of sanding drums Ø 25, 30, 40 and 45 x 100 mm for external and internal curves, with spindle safety cover. Design: Robust machine frame with heavy cast iron tables, sanding unit motorized height adjustment up to 120 mm and tiltable up to 45° without any table adjustments (patented construction), belt drive motor 3 kW (4 HP), 400 V/50 Hz, with motor protection switch, separate motor for belt oscillation, oscillation stroke programmable from 10 - 90 mm, control box integrated in frame, constant belt tension with length compensation, belt tracking adjustable, safety guard, dust extraction via two extraction hoods, flexible hoses and common internal pipe to 150 mm connection, recess in frame for easy transport with pallet or forklift, belt width 150 - 200 mm, belt length 2000 mm, working height 830 mm (solid sanding table) or 900 mm (veneer sanding table), net weight 750 kg, footprint 1150 x 800 mm. Feed system: Integrated in the frame, two parallel transport belts 50 mm wide, spaced 250 mm apart on the underside, 20 mm wide top pressure rollers, 0.55 kW (0.75 HP) motor, continuously adjustable speed 3 - 15 m/min. COMFORT version Kündig UNIQ-S Including table extension UNIQ/UNIQ-S/Flash Including upper extraction duct UNIQ without slide Including semicircular table for belt drive roller UNIQ-S Availability: short-term Location: Flörsheim

Condition: as good as new (ex-display), Edge and contour milling machine Make: Assfalg Model: KKE 1 Condition: Demonstration machine Iodpfsw Rl Rzex Aabstn Speed: 8,000 - 24,000 rpm (stepless) Max. chamfer width: 3 mm Standard equipment includes: - Guide ruler - Socket wrench, open-end wrench - Work ring Ø 30 x 8 mm - Collet Ø 6 mm with union nut - Operating manual

Year of construction: 2010, condition: good (used), Offer 23026 Technical data: - Barrel width 1 - 15 mm Itodpsi D D Ugsfx Aaben - Cutter head with indexable inserts - barrel angle 30° - 37,5 - 45° - 60 ° - drive 220 V / 1100 Watt - space requirement approx. W 450 x D 300 x H 350 mm - weight approx. 20 kg - transport case

Condition: used, Year of construction: 2011, Type KDF 220 C Ijdpfx Aoxc N Hveabetn Year: 2011 Unit controlled via display Gluing unit End trimming saw unit Flush milling unit Corner copying unit Radius scraper Surface scraper Edge thickness: 0.4 - 3 mm Workpiece thickness: 8-50 mm Feed rate: 10 m/min Total power: 9.5 kW Length: 4150 mm Weight: 1150 kg €19,990 incl. VAT, stated on the invoice

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on a Homag Edgeteq S-200, KDF 1130 FC (1100 kg). However, it will certainly also fit other machines, e.g. Brandt (may require slight modification). Iedpfow S Dmdox Aabotn Length of U-profiles approx. 1130 mm Build height incl. rollers approx. 150 mm 4 robust steel swivel castors with grease nipples 2 brakes 2 leveling plates for height adjustment The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse – see "more offers from this seller".

Condition: excellent (used), Year of construction: 2015, HOLZ-HER Sprint 1329 - Used edge banding machine in good condition. - Year of manufacture: 2015 Itodpfoxducrex Aabjn - Includes BARBARIC return conveyor (year: 2017) - Available from end of November/beginning of December 2025 Please feel free to contact us if you have any questions.

Condition: used, Year of construction: 2017, Used machine Year of manufacture: 2017 Condition: Factory overhauled by Lange Maschinenbau Minimum workpiece width approx. 75 mm Minimum workpiece thickness 8 - 50 mm Minimum workpiece length approx. 120 mm/180 mm for corner rounding Edge thickness 0.4 - 2 mm Stepless chip removal of the joining unit 0 - 2.0 mm Joining unit with two counter-rotating, insert-controlled joining units Diamond tool height = 55 mm Direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue pot with discharge function Pressure unit Itsdpfsw Sbblsx Aabjn Cross-cutting unit with HF motor, 2 saw blades, and high-precision linear guides Combination milling station for radius and chamfer milling Corner rounding unit Surface scraper unit Suction pipe system with 90° bend and manual slide valve mounted on the machine Machine length: 3273 mm Availability: Short term Location: Hochheim

Condition: used, Year of construction: 1996, machine/vehicle number: xxxx, Lg.no. 24265 Technical data: - Shaft holder 35 mm - Shaft groove length 90 mm - Drive speed 1450 rpm Itsdpstx Ubrjfx Aabsn - Drive 400 V / 4.4 kW - Space requirement approx. W 1300 x H 2500 x D 800 mm - Weight approx. 200 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical data: Itjdpfx Aaed Af Shobon -Plate thickness up to 6-40 mm -Pipe Beveling min. Ø 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg

Condition: good (used), Year of construction: 2014, machine/vehicle number: 11885, Offer 25129 Technical data: - Abrasive diameter: 150 mm - Swivel head - grinding unit rotatable and swiveling on articulated arm - Dust drawer - Steplessly adjustable disc speed - Table dimensions: 1400 x 980 mm - Table height approx.: 870 mm - Drive: 400 V / 0.75 kW - Pneumatic connection: 6 bar - Required space approx.: W 1700 x H 1700 x D 1300 mm Itsdswpthmspfx Aabon - Weight approx.: 400 kg

Condition: used, Year of construction: 2020, machine/vehicle number: 031EP-2020, Lg.no. 24558 Technical data: - Abrasive diameter 150 mm - Sanding unit swivels on articulated arm - Swivel radius of sanding arm 2000 mm - Motorized dust extraction - Infinitely variable disc speed - 800 - 2200 rpm Iodpfx Aovazz Djabetn - Table dimensions 1500 x 880 mm - table height approx. 920 mm - Drive 400 V / 3.6 kW - Space requirement approx. W 1600 x H 1600 x D 1600 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm Itjdpfx Aollvr Deabsn - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm