Used Ends Processing Machine for sale (71,918)

Condition: excellent (used), Year of construction: 2020, Meat mixing machine - tumbler. Isdpoyhzr Hofx Abcetd

Condition: excellent (used), Year of construction: 2019, ■ V310 plate processing machine (including 2 gantry beams of 5.500mm and side trucks) ■ This V310 plate processing machine is capable of processing plates up to 3.000mm x 34.000mm ■ X-rail (37.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table with drilling supports (3.800mm x 35.360mm, 1 pcs, suitable for ≥ 350A cutting) ■ Donaldson fume extraction unit DFPRO12 - 200L (2 pcs) ■ Gantry beam 1 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) Isdpfx Absym Nf Iecstd ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers) Gantry beam 2 ■ Position 1: VD40 drilling unit (servo driven, executed with automatic tool changer, up to 10 different tools) ■ Driven suspension (1 pcs, servo motor driven) ■ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ■ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x-, y-, k- and v-weld preparations) ■ Driven suspension (1 pcs, servo motor driven, including laser pointer) ■ Dross inhibitor (1 pcs, including 1,2L reservoir) ■ Arc Glare protection (1 pcs) ■ Position 3: Oxy-fuel cutting torch (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ■ Voortman height control (1 pcs, capacitive height control) ■ Clamped suspension (1 pcs, clamped to position 2, with manual clamp) ■ Safety devices (light curtain, safety bumpers)

Condition: good (used), functionality: fully functional, Schröter 2-trolley smoke, cooking, and drying systems, gas-heated Each unit suitable for 2 standard trolleys 1x1x2 meters With gas burner Ijdjykl N Rspfx Abcotd With cooling coil With smoke generator With control system Wiring diagrams available. There are 2 units, fully dismantled and dry stored.

Condition: excellent (used), functionality: fully functional, Intensive Vacuum Paddle Mixer Tecmaq Type Alfa 300 with arm lift for 200 L standard trolley, tiltable mixing vessels and: - MC control – membrane keypad - Plexiglass cover – hydraulics - Tiltable mixing vessels – hydraulics - Lift for 200 L standard trolley – hydraulics - Busch vacuum pump Itodpfx Aeyk Afcebcsd - Machine completely reconditioned - Power: 4 kW / 3x 400 V / 50 Hz.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, - Handtmann Vacuum Filler Type VF 616 - Output approx. 3,600 kg/h – Filling pressure approx. 45 bar – Power: 6 kW / 3 x 400 V / 50 Hz - PCK-3 control monitor - Filling hopper 350 L – Split – 90/350 L - Weight compensation - Busch vacuum pump 16 m³ - Lift for 200 L standard trolleys Type 83-6, stainless steel - Twisting gearbox Type AG 410, stainless steel - Holding device Type HV 414 incl. 2 x filling tubes + brake / stainless steel Iedpfxjykz T Ej Abcjtd - Redirecting unit with redirecting rollers / stainless steel - Casing loading device DA 78-6 – stainless steel - Year of manufacture: 2015 / Fully reconditioned in 2026!!! With original spare parts – Made by Handtmann!!! - Complete accessories + documentation

Year of construction: 2006, condition: used, Rotox bar processing automaton type SBA 485 Isdeyliq Uspfx Abcetd

Condition: used, Rotox corner processing machine Isdjylipkepfx Abcotd

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: FULL CNC MAKİNE PARKURU, • Enables production of 200 - 220 windows in an 8-hour working shift. • This set provides customers with rapid production capability thanks to various machine configurations. • Available in 380 Volt or 220 Volt options. • Compliant with CE (European) standards. • Door-to-door delivery prices to any location worldwide. • References available from previous clients in your country. • You can choose different machines from our catalogue and create custom combinations. • All machines are covered by a 2-year warranty. MACHINE LIST • SC 4000 S Fully Automatic Servo Motor Double-Head Aluminum & PVC Cutting Machine ( Ø550 mm saw blade) • SC 5000 S Aluminum & PVC 3-Axis CNC Milling Machine • SC 521 S Triple Water Drainage Opening Machine with High-Frequency Motors • SC 100 Double-Head Welding Machine • SC 6000 S CNC Corner Cleaning Machine (2 Axis) • SC 211 Aluminum & PVC Mullion End Milling Machine • SC 301 S Aluminum & PVC Glazing Bead Cutting Machine (No Mould Required) • SC 902 S Hydraulic Aluminum Corner Crimping Machine • SC 801 Air Compressor (500 Litre) Itedpfjrfy Idox Abcsd Please request our catalogue for further details. We can provide worldwide door-to-door delivery.

Condition: good (used), Krämer Grebe WW 130 Grinder Power supply: 400V, 50Hz Ijdpfx Absyk T Dvjcotd Power: 18kW Capacity: til 4.000 kg/h Height: 140 cm Width: 95 cm Length: 145 cm Weight: 880 kg Main material: Stainless Steel Mixing capacity: 100 kg

Condition: good (used), JBT Stein TM3 batter mixer. Direct from closed fried food factory, this machine was used for making tempura batter for a line producing chicken burgers for McD. 2011 machine but the factory closed down in 2016. Itjdsu Iax Iopfx Abced

Condition: excellent (used), functionality: fully functional, machine/vehicle number: E3360111111, REF: MM6276 1 x Robot Coupe high-speed cutter / emulsifier. Ideal for procssing 20-100 portions, this machine is designed for the preparation of texture modified meals. All foods, whether raw or cooked, sweet or savoury, whether entrees or mains, dessert or cheese, can be processed to various texture levels. Supplied with Blixer Arm and Serrated blade. Technical specification ⚙️ Itodpfexq Eppsx Abcsd ✅ Model - Blixer 30 5400W. ✅ Serial number - E336011111. ✅ Timer function - 0-15 minutes. ✅ Input voltage - 400 V / 50 hz / 3 phase. ✅ Power - 5.4 kW / 11.6 Amps.

Condition: refurbished (used), functionality: fully functional, We offer the LASKA industrial mixer with a capacity of 1600 liters, designed for intensive mixing of meat, poultry, fish, vegetable stuffing, and convenience products. Its large working capacity makes the device ideal for medium and large meat processing plants, for the production of sausages, burgers, delicatessen products, and ready meals, ensuring uniform mixing of ingredients, spices, and functional additives. The mixer is equipped with an 18.5 kW motor. The machine has undergone a major overhaul of its engines and controllers, and has no vacuum. The device offers a mixing and unloading function, and hydraulic unloading flaps are located under the tank, making emptying the chamber quick, safe, and comfortable for the operator. Solid, heavy-duty stainless steel construction. Technical data: Manufacturer: LASKA Machine type: industrial mixer for meat and stuffing Working capacity: 1600 l Itjdpeycg H Iofx Abcjd Installed power: 18.5 kW Construction: stainless steel Dimensions: L: 2700 x W: 1450 x H: 1940 mm The LASKA 1600 l, 18.5 kW mixer is an excellent choice for plants that want to increase production efficiency, automate the stuffing mixing process, and achieve consistent product quality using a reliable, used machine.

Condition: used, We offer the Inject Star P60 separator – an industrial machine for advanced meat recovery (AMR), designed for meat and poultry processing plants and factories that want to maximize the use of raw materials and reduce production losses. The P60 separator works on the basis of a hydraulic press with a crushing chamber, which separates meat from bones and hard tissues and then presses it through a perforated filter. How does the Inject Star P60 separator work? In a special feeding device, the bones are fed into the pressing chamber and pre-compacted. Then, a linear hydraulic system separates the advanced meat from the bones and pushes it through a perforated filter (standard 8 mm). This results in high-quality meat mass while maintaining low calcium content and minimal temperature increase during the process, which has a positive effect on the quality and functionality of the final product. The AMR Inject Star system enables the recovery of up to approx. 35% of meat from red bones, with low wear on consumables and relatively low running costs. Technical data: Manufacturer: Inject Star Model: P60 Power supply: 400 V, 3Ph, N Installed power: 18 kW Capacity: 900 kg/h Capacity with bone breaker: 1500 kg/h Process type: hydraulic pressing system with perforated filter (8 mm, optionally 2 mm) Dimensions (L x W x H): 4900 x 1900 x 2900 mm Weight: approx. 4100 kg Advantages of the Inject Star P60 separator High meat recovery from bones – up to approx. 35% of high-quality meat can be recovered from red bones, which significantly increases the profitability of the raw material. Itedpeycc H Rofx Abcod Low calcium content – the end product is characterized by a low calcium level (< 1,000 mg/kg) thanks to the use of a precision pressing chamber and perforated filters. Minimal temperature increase – the separation process causes only a slight increase in meat temperature, which has a positive effect on color, structure, and technological properties. Low operating costs – the low-wear design and low maintenance requirements reduce running costs and the risk of expensive downtime. Possibility of line expansion – according to the manufacturer’s offer, the separator can work with a bone crusher as a preliminary stage and with additional soft tissue separators, as well as various loading systems.

Condition: good (used), Year of construction: 2008, Direct from closed factory. Waldner Dosomat 12.6 (12 stations, 6 across) Has been packing foil trays of retortable products like pate. Siemens touchscreen controls. Machine in lovely condition and only available because of factory closure. Ideal for packing pate, pet food or meat paste. Could also be used for plastic trays and pots. Itjdpfxoqgfaqs Abced

Year of construction: 2009, condition: ready for operation (used), A Mitsuboshi Diamond Industrial CNC glass cutting machine is available. Glass thickness range straight: 0.4mm-1.1mm, glass thickness range curve: 0.8mm-2.2mm, cutting range X/Y: 500mm/500mm, cutting speed: 500mm/s, cutting accuracy straight: +/-40µm, cutting accuracy curves (depending on radius): +/-100µm. Machine dimensions X/Y/Z: approx. 1100mm/1900mm/1600mm, weight: approx. 1000kg. Documentation available. On-site inspection is possible. Isdpfewihzujx Abcetd

Condition: ready for operation (used), Year of construction: 2006, Power: 1.5kW, materials: plastic/aluminum, intended use: welding and machining processes, operating pressure: 7bar, machine dimensions X/Y/Z: approx. 1500mm/1500mm/1800mm, weight: approx. 150kg. Including accessories. On-site inspection is possible. Iedpfoukhz Isx Abcjtd

Year of construction: 2000, condition: ready for operation (used), Profile width min./max.: 50mm-130mm, profile height min./max.: 50mm-115mm, max. notching depth: 40mm, max. cutter diameter: 180mm, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1250mm, weight: approx. 300kg. On-site inspection is possible. Ijdpewwvwgjfx Abcetd

Condition: excellent (used), Year of construction: 2016, Seydelmann AMR1800/250 mixer grinder with CO2. 1800 litre hopper with 250mm head. Beautiful condition. 2 units in stock, very high specification machines. New cost in excess of EUR 300,000 We also have many other (22) Seydelmann machines from the same factory, all bought at the same time. Please ask for details. Iedpfxsifk Ice Abcjtd

Condition: used, Year of construction: 2000, functionality: fully functional, Meat grinder / angle grinder Seydelmann used, year of manufacture: 2000, fully operational, made entirely of stainless steel, complete with accessories: grinder knife, grinder plates, screw conveyor, separating set, lock nut. For technical data, see type plate. Price including VAT. VAT can be shown separately. No guarantee or warranty. Isdeyh Nxuopfx Abcotd

Condition: new, Year of construction: 2026, For sale: a fully electric Highspeed-M mould carrier! Some highlights of our fully electric Highspeed-M mould carrier: • Suitable for both open and closed foam application • High-precision linear drives with integrated rack and pinion guides • Simultaneous movement of axes possible • Maximum swivel ranges: tower axis: +/- 95°; clamping plates: +/- 45° • Variable and absolutely precise positioning via frequency-controlled servo drives • High travel speeds for closing and swiveling operations • Ergonomic design for user-friendly accessibility • Powerful and future-proof thanks to the use of state-of-the-art, high-quality components • Visualisation system with user-friendly operation of all functions • All customization options can be realized ° Extract from the technical data of the pictured mould carrier: · Mounting plate dimensions: W 1,500 mm x D 1,000 mm · Max. mould weight: 1,500 kg, top part max. 500 kg · Max. clamping force: 350 kN at 6 bar compressed air Iedpfx Asyi E Hyebcetd · Max. demoulding force: 30 kN · Maximum parallel stroke: 1,800 mm · Swivel angle of upper/lower mounting plate: 0° - 45° · Swivel angle of tower: -90° to +95°

Condition: repair required (used), Year of construction: 1994, functionality: limited functionality, machine/vehicle number: 466EIF712N14 / V47Y10D94502002, clamping force: 1,800 kN, Two REP injection molding machines with platen dimensions 510 x 430 mm, clamping force of 180 t, and injection capacity of 670 cm³. The first machine requires piston repair and seal replacement. The second machine is missing the hydraulic pump, pressure control valve, and control program card. Itjdpfxoyb Rw Uj Abcod

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 41/890, clamping force: 200 kN, Rutil injection molding machine with a platen size of 260 x 240 mm and a clamping force of 20 t, with an injection capacity of 1000 cm³. The machine is in working condition. Itedpfx Abeyb Rn Tecod

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Ijdetgvgpspfx Abcotd Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. Ijdowxfggspfx Abcotd The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Ideal for plastic drums, crates, bins. For price contact seller for more information & a video of the machine operating if required.

Condition: ready for operation (used), functionality: fully functional, input voltage: 400 V, Schröder injector with 40 needles, workshop tested, functioning Isdpfxeyi Sggj Abcotd