Used Groove for sale (1,303)

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: Gsdpfsykqxdsx Aatebt The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: used, Year of construction: 2019, machine/vehicle number: 0191, For sale: Fenstek Emerald F260, a 4-axis CNC profile machining center from 2019, designed for the precise machining of long aluminum and plastic profiles. Thanks to its working range of up to 7,000 mm and the powerful 9 kW HSD spindle, this machine is particularly suitable for window, door, and facade production. The machine comes from a professional production environment, has been well maintained, is damage-free, and is fully operational. Inspection and a demonstration under power are possible. Key specifications: - Axes: X / Y / Z / A, 4-axis interpolation - Control: PA8000 - Spindle: HSD, 9 kW - Maximum speed: 24,000 rpm - A-axis rotation: +90° to -90° - Working range: up to 7,000 mm, depending on the clamping configuration - Tool magazine: ISO30, 9 positions - Operations: milling, drilling, tapping, grooving, and chamfering - Suitable materials: aluminum profiles, light alloys, and uPVC Gbedpfox R U Eijx Aatot An interesting machine for companies that want to machine long profiles flexibly and in a single setup.

Condition: excellent (used), Year of construction: 2006, I sell the fully equipped edge banding machine BRANDT ProfiLine KDF 790, year 2006: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding with preheating tank Material pressure zone servomotorical adjustable End cutting saws pneumatic adjustable Rough milling top + bottom manual adjustable Tilting radius milling top + bottom servomotorical adjustable Corner rounding 2-motor servomotorical adjustable Radius R2 scrapers pneumatic adjustable / Second set for R1 included Gbsdpfx Aajh U Nzpetet Glue scrapers manual adjustable Grooving saw Polishing brushes Separation fluid spraying in the front Cleaning fluid spraying in the back Working thickness adjustment servo driven Material height 8-60mm Edge thickness 0,4-12mm Feeding speed up to 20m/min. Total length including feeding plate 7860mm Kilometerstatus 1.650.000 Meters edgebanded. Including full documentation and CE. Very good condition, fully working!

Condition: good (used), Crane block, pulley, rope pulley, steel rope pulley, rope pulley for crane, pulley block, rope pulley with pulley block, wire rope pulley block, crane rope, four-rope multi-shell grab, polyp grab, mechanical multi-shell grab, shell grab, ship unloading grab, scrap grab, garbage grab, rope grab, digging grab -Rope pulley: Rope pulley 1 grooved Ø 570 mm -Groove width: 50 mm -Hole: Ø 110 x 80 mm -Number: 4x pulley available -Price: per piece Gedpfev Hmrnox Aatebt -Dimensions: Ø 570 x 80 mm -Weight: 42 kg/piece

Condition: used, Year of construction: 2011, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg Gjdpfx Aaju Sr Szstebt We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: ready for operation (used), Year of construction: 2018, operating hours: 408 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 50 mm, number of axes: 3, total height: 1,950 mm, total width: 1,500 mm, overall weight: 850 kg, product length (max.): 2,100 mm, This 3-axis FORMAT4 c-express 920 classic was manufactured in 2018. It features a maximum workpiece dimension of 3000 mm in the X direction and 920 mm in the Y direction, with a robust clamping collet system for CNC through-feed technology. The machine is equipped with 6 vertical and 9 horizontal drilling spindles, allowing for versatile drilling, sawing, and milling operations. If you are looking to get high-quality wood machining capabilities, consider the FORMAT4 c-express 920 classic machine we have for sale. Contact us for further details. • Voltage: 400 V • Phase: 3 Ph • Frequency: 50 Hz • Current: 22 A • Power: 7.0 kW • Duty Cycle: S6 40% • CNC Drilling Center c-express 920 classic • Clamping Collet System for CNC Through-Feed Technology • Drilling, Sawing and Milling Operations from Below • Laser "0" Double Reference • Drilling Head: DH15 • 6 Vertical Drilling Spindles • 9 Horizontal Drilling Spindles • 1 Grooving Saw in X Direction • Graphical User Interface • Machine Software License: 1 • CE Conformity • Maximum Workpiece Dimensions (X × Y × Z): 3000 × 920 × 50 mm • Minimum Workpiece Dimensions (X × Y × Z): 280 × 180 × 10 mm • 19" LCD Color Display • Mouse and Keyboard • Packed on Pallet: 2100 × 1500 mm Tools: • HW circular saw blade 100 × 5 / 3.6 × 20 Z24 / FZ Gedpfozuhctjx Aatjbt • DP end mill D12 / NL23.5 / Z2+2+Q / GL80 / S20 / RL • ER32 collet, Ø20 mm • Drill bit Ø5 mm LL (3×) • Drill bit Ø5 mm RL (2×) • Drill bit Ø8 mm LL (4×) • Drill bit Ø8 mm RL (3×) • Through drill bit Ø5 mm LL (1×) • Drill bit Ø15 mm RL (1×) • Drill bit Ø35 mm RL (1×) • End mill Ø8 mm (1×) • End mill Ø10 mm (1×)Upon request, we can also offer suitable extraction systems (currently eligible for funding in Germany) and compressed air solutions

Condition: excellent (used), V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing Gbodpfxsm T Ahls Aatet -V-belt pulley: pulley with 10 grooves, unused -V-belt width: 22 mm -Taper bushing recording: Ø 100 x 100 mm (can be changed) -Dimension: Ø325 x 265 mm -Weight: 66 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, operating hours: 16,000 h, 2012 Intermac Master 33c CNC C-axis (for groove) AND T-axis Bed size 1500x3000mm Selection of cups and tools included This CNC can be used for stone or glass. It was originally used as a stone machine but i use it for glass processing. We have two of these machines, we are replacing this one with a larger Master 38.3, machine in perfect working order and can be seen running in our factory right now. Gedpfx Aszi T Uqsatjbt Can show buyer the basics on how to use machine. Can also dismantle and load machine for buyer. Can help out with installation. Have more detailed pictures and videos if required

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, HOLZ-HER EVOLUTION 7405 (2021) – Like New! Only 202 Working Hours HOLZ-HER EVOLUTION 7405 vertical CNC machining center for sale. Excellent condition, barely used, fully operational under power. Quick Specs: - Year of manufacture: 2021 - Active milling hours (Vorschub aktiv): ONLY 202 hours! - Total machine uptime: 1,860 hours - Serial No: 1195/2-109 - Made in Austria (CE) Features & Software: - HOLZ-HER CAMPUS / HOPS active / Betternest - Vacuum-free automatic panel clamping system Gbsdpfxozutd Ne Aatot - Complete 4-side routing, drilling, and grooving - Compact vertical design (under 5 m² footprint)

Condition: good (used), Year of construction: 2010, functionality: fully functional, Used Holz-Her Cut 6120 - Year of manufacture: 2010 - Availability: End of September 2026 Gsdpfeziwqpex Aatebt - Automatic cutting height adjustment - Scoring unit - Saw blade projection: 82 mm - Label printer - Cutting length: 4400 mm - Electronically controlled pressure beam and saw carriage for short cycles - Grooving program / motor-adjustable

Condition: used, Year of construction: 2020, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 1,55,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. Gedpfszu S U Hjx Aatobt The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Weight approx.: 155,000 kg Rotation height max.: 2,100 mm Table diameter: 3,800 mm Swing: 3,800 mm Control: Siemens SINUMERIK 840D sl Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Year of construction: 2,020 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: good (used), Year of construction: 2009, functionality: fully functional, The supporting structure is made from a thick, monolithic steel block with a reinforced core. The construction is triangular with a wide base and is designed to ensure the machine's stability under all processing conditions. Guideway lubrication is centralized, meaning all guideways on the machine are lubricated from a single point. The CNC features a full aluminum worktable with grooves for vacuum limitation or fixture mounting. This type of worktable is especially useful for “NESTING” operations. The electrical cabinet is built according to international standards, ensuring total reliability of the integrated components. Technical specifications: Working dimensions: Gbodpfx Aaey Nv Ucetst With vertical milling: 3260 x 1250 mm With drilling head: 3330 x 1540 mm Maximum workpiece height: 180 mm X, Y, Z axis travel: 3420, 1690, 280 mm Tool storage positions: 12 Vacuum pump: 100 m3/h Power: 10.5 kW Rated voltage: 400 V Frequency: 50/60 Hz Machine weight: 3400 kg Software: Xilog3 (supports .dxf file import) Year of manufacture: 2009

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 01254653, Production line for manufacturing wooden components for TERTU timber-steel guardrails. - Grooving machine T18 - Grooving machine – posts - Crosscut saw - Finishing machine (cutting, drilling) - Feed tables - Drilling table - 4× spare heads - Complete set of spare knives and drill bits Gbodpfxeu A Hv Ne Aatjt Simple, very high-quality, and robust machines. Fully complete and ready for operation.

Condition: used, Year of construction: 2017, The BIESSE ROVER A 1643 EDGE is a comprehensively equipped CNC machining center with a 5-axis machining head and an integrated edge banding unit. Working area, X-axis: 4,320 mm Swing machining in X: 1,620 mm Working area, Y-axis: approx. 1,580-1,660 mm Travel, Z-axis: 180 mm Edge banding Working area, X-axis: 3,300 mm Working area, Y-axis: 1,540 mm Maximum loading width in Y: 1,900 mm, expandable to up to 2,100 mm 5-axis unit 5-axis machining head C-axis: continuous 360° rotation B-axis: continuous 360° rotation B-axis speed: 18 rpm C-axis speed: 18 rpm Maximum spindle speed: 24,000 rpm Power 11 kW in S1 operation 13 kW in S6 operation Additional features Maximum undercut angle: -10° Collision monitoring for the 5-axis unit Prepared for the use of attachments on the 5-axis unit Work table and clamping system ATS work table 8 support rails 32 adjustable consoles 32 pneumatic vacuum cups Vacuum cups adjustable in 15 steps Pneumatic system divided into 2 working zones along the X-axis Vacuum system Vacuum pump capacity: 250 m³/h Additional equipment 6 lifting bars for easier loading and unloading 28 sensors for detecting lowered stops Stops and positioning 8 rear stops 8 center stops 4 side stops (2 left + 2 right) 2 additional side stops 4 removable center stops (2 left + 2 right) 2 additional center stops Pneumatic positioning and lowering of the stops Drilling unit BH 24L drilling head 13 independent vertical spindles 5 independent horizontal spindles Grooving saw, 120 mm Maximum groove depth: 25 mm Programmable spindle speed up to 6,000 rpm Tool changer 16-position rotary magazine Gjdezuwyzspfx Aatjbt Mounted on the X-axis carriage For tools and attachments Capacities Maximum tool/attachment weight: 7.5 kg Maximum total load of the magazine: 55 kg Edge banding unit GU60A edge banding unit For workpieces up to 60 mm thick Edge banding speed up to 20 m/min Double pressure roller system Glue pot with hot melt system Edge heating lamp, 600 W CNC-controlled edge feeding system Automatic edge trimming Sensor for closed geometric shapes Accessories for edge machining Edge magazine 2-roller edge magazine mounted on the X-axis carriage Maximum roller diameter: 800 mm Maximum edge height: 65 mm Additional units Rounding tool 85 mm, HSK F63 Saw unit HSK F63 for cuts and grooves Maximum saw blade diameter: 215 mm Maximum saw speed: 8,400 rpm Maximum cutting depth with a 215 mm saw blade: 68 mm Post-processing Combined glue joint and edge trimming blade units Tool sets for different edge thicknesses Software bSolid basic module 2D CAD environment Import of DXF, CIX and BPP files 3D machine simulation Tool management Management of 5-axis machining through positioning Assistant-supported program creation

Condition: used, Year of construction: 2021, operating hours: 120 h, functionality: fully functional, For sale: Victaulic RG 3210 grooving machine for forming pipe ends D60.3 – 323.9 mm. The machine was used for approximately 1.5 years as part of a pipe assembly manufacturing project. Accessories include: lower/upper grooving tool 88.9 – 168.3 mm stainless steel, pipe support stand. As the project has ended, we no longer require this equipment. Original price: 184,440 CZK. Gjdpfx Aajy Hpatetobt

Condition: used, Manuelle Nut- und Perforationsmaschine / manuall Creasing and Perforation machine Gjdpfszbarzsx Aatebt Nut- und Perforationsmaschine / Creasing and Perforation machine Pernuma 1470H Serial-No. 3473 Arbeitsbreite / Working width max. 500mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation   Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, manuelle Rillmaschine - Perforiermaschine / manuel Creasing - Perforation machine Nut- und Perforationsmaschine / Creasing and Perforation machine Halin & Schächinger CP Serial-No. 2708 Arbeitsbreite / Working width max. 500mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Gbodpfx Aozbawdjatst

Condition: used, Manuelle Nut- und Perforationsmaschine / manuall Creasing and Perforation machine Nut- und Perforationsmaschine / Creasing and Perforation machine Foellmer EX Serial-No. 156 Arbeitsbreite / Working width max. 450mm Inklusive Nut- und Perforationswerkzeug / Include Creasing and Perforation tools Handbetrieb - Manuell Operation Gbodezbah Njpfx Aatjt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2002, For sale: Junget / Biesse Rover 24 L CNC milling machine / machining center. The machine is designed for professional processing of furniture panels, wooden components, plastics, and production components. It is suitable for carpentry workshops, companies producing furniture, kitchen elements, fronts, structural panels, PEHD components, and other parts requiring precise milling and drilling. The Biesse Rover 24 L is a robust CNC machining center equipped with a vacuum table, automatic tool changer, and a set of drilling spindles. The machine enables quick and repeatable performance of milling, vertical and horizontal drilling, and grooving operations. Technical specifications: Model: Junget / Biesse Rover 24 L Type: CNC milling machine / CNC machining center Machine dimensions: approx. 5.8 × 2.45 × 2.5 m Work table: vacuum X-axis travel: 4500 mm Y-axis travel: 1300 mm Z-axis travel: 180 mm Vacuum pump: 120 m³/h Control system: NC1000 Operating system: Windows XP Automatic tool changer: yes Vertical drilling spindles: 7 pcs Horizontal drilling spindles: 8 pcs Circular saw: for making grooves / slots, e.g., in fronts or furniture components Safety features: safety grid / safety mat Tools installed in the machine: included Applications: The machine is particularly well-suited for the production of furniture, kitchen cabinets, fronts, carcasses, base panels, and components requiring serial drilling and milling. The drill array allows for the simultaneous execution of several holes, which speeds up production and ensures dimensional repeatability. The machine was mainly used for processing PEHD1000 plastic, which confirms its versatility and the ability to work not only with wood-based materials but also with engineering plastics. Technical condition: The machine has been used. According to information from the previous owner, the device is functional, starts up, and has no known defects or reservations. The equipment is sold as used and is subject to verification by the buyer upon collection. Key advantages: * robust industrial construction, * large working area, * vacuum table, * automatic tool changer, * vertical and horizontal drilling spindles, * circular saw for grooves and slots, * ability to process panels, wood, and plastics, * good machine for the production of furniture and serial components. Gbjdpjzf E E Hefx Aatet The machine is suitable for continued operation in a production plant, carpentry workshop, or company engaged in CNC machining.

Condition: excellent (used), HOMAG EDGETEQ S-380 edge banding machine Top-mounted material pressure beam, liquids Pre-milling cutters, Glue application, Preheating unit with glue pot Pneumatic preliminary trimming unit, Gedpfxozmgh Sj Aatebt pressure rollers liquids Final trimming saws, R1-R2 top-bottom milling unit 2x R1-R2 corner rounding unit Multi R1-R2 profile trimming unit Flat trimming unit, Liquids Polishing unit, Grooving unit Nesting The machine features NC control; all settings and operations are performed from the control panel. Maximum part height: 60mm, Maximum reel edge band thickness: 3mm, Feed rate: 8-18m/min The machine is in very good condition and is almost as good as new. Operating hours: 535h

Condition: used, Year of construction: 1997, used good condition Gbodpjzkvy Eefx Aatot low mileage cleaned functionally tested partially refurbished completely adjusted Includes 1 sanding unit Combination unit with electronic shoe Dust brush Manufacturer: Bütfering Type: ECO e1100 Year of manufacture: 1997 Machine no.: 34546 Working width approx. mm: 1100 Passage height approx. mm: 150 CE type-tested Number of units: 1 Belt dimensions l x w mm: 1120 x 1900 Feed speed m/min: 4 + 8 Calibrating roller Grooved Rubberized Combination unit kW: 11 Electronic segmented shoe Dust extraction connection mm: 180 + 140 Space requirement approx. L x W x H mm: 1700 x 1700 x 2000 Weight approx. kg: 1500 Location: 97447 Gerolzhofen, free loading, unpacked Handover in as-is condition, as inspected, without warranty and guarantee

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control/Software MAESTRO Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 Godpfx Ajzza Sgoatobt WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC with spindles: - No. 24 Independent vertical boring spindles - No. 11 Independent horizontal boring spindles (6 in X + 4 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 6,6 Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions) OPTIONAL: Panel loading robot + Robot for unloading machined panels

Year of construction: 2022, operating hours: 24 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, This 9-axis BLM DH4010 fully electric CNC wire bending machine was manufactured in 2022. It features a dual-head design with a maximum wire diameter capacity of up to 12 mm for wire with tensile strength of 600 MPa. The machine includes advanced programming software, realistic 3D simulation, and automatic wire feeding. If you are looking to get high-quality wire bending capabilities, consider the BLM DH4010 machine we have for sale. Contact us for further details. • Machine type: Fully electric CNC wire bending machine with automatic wire feeder • Number of axes: 9 • Configuration: Dual-head design with two wire bending heads • Maximum wire diameter: • Up to 12 mm (1/2") for wire with tensile strength of 600 MPa (87,000 psi) • Up to 10 mm (3/8") for wire with tensile strength of 1,000 MPa (145,000 psi) • Maximum distance between bending heads: 3,070 mm (121")The machine is equipped with VGP3D 3D graphical programming software featuring: • Realistic 3D simulation for part feasibility verification • Automatic collision detection • Cost estimation • Automatic machine cycle generation • Automatic optimization of the bending sequence Standard and Included Equipment • Centrally positioned 3D manipulator • Head-mounted grippers for workpiece holding and ejection • Variable-radius bending • 6-position bending turret • Automatic wire feeding unit • End-processing carriage with linear orthogonal wire cutting unit • Wire cutting capacity: up to 12 mm (1/2") for wire with a tensile strength of 600 MPa (87,000 psi) • Wire chamfering unit • CE compliantDH4005-03 • Tube straightener and RV straightening unitDHSD4-02 • Straightening rollers (9+9) with V-groove for wire diameters from 2 to 4 mmDHSD6-02 Gbsdpszqtgvefx Aatot • Straightening rollers (9+9) with V-groove for wire diameters from 4 to 6 mm

Condition: ready for operation (used), Year of construction: 2017, The machine (specifically, the upper drilling head) will be overhauled, and all functions will be verified by Novellomac in September, after it arrives at the warehouse. A demonstration and on-site inspection will also be possible, including via video. Workpiece length: 3000 mm Maximum workpiece width: max. 1300 mm (with some limitations) 2 panel clamping devices Lower working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Gedozq Ab Nopfx Aatebt Upper working units: Milling unit Saw unit for grooves, in the X and Y directions, rotatable by 90° Vertical drilling bits: 36 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 2 Control: powerControl PC86 powerTouch Software: woodWOP Barcode reader system package Loading table with air cushion Transverse belt conveyor for unloading Safety guards Multiple processing of workpieces up to 3000 mm in length Part of the upper drilling head requires overhaul.

Condition: used, Year of construction: 2021, input current: 21 A, input frequency: 50 Hz, We are offering this used HOMAG DRILLTEQ V-200 through-feed drilling machine, manufactured in 2021. The machine has been regularly serviced by HOMAG. The package includes a KOGI dust extraction unit (2.2 kW / 1,650 Pa), two collection bags, and various tools. Specifications Vertical drilling block with 13 spindles Horizontal drilling block with 4 spindles on the X-axis Horizontal drilling block with 2 spindles on the Y-axis Grooving saw, Ø100 mm Correctness control system 10 kW tool-changing spindle Maximum workpiece length: 200–3,050 mm Workpiece width: 70–850 mm Workpiece thickness: 8–56 mm PowerTouch display WoodWOP software included Machine Data Type: DRILLTEQ V-200 OPTIMAT BHX050 Serial number: 0-250-73-6562 Year of manufacture: 2021 Power supply: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Rated current at full load: 21 A Fuse rating: 25 A Control voltage: 24 V The package also includes a KOGI dust extraction unit with a 2.2 kW motor and 1,650 Pa suction pressure, equipped with two collection bags, as well as various tooling. Gbodpjy Extmefx Aatst Should you have any questions or require additional information, please do not hesitate to contact us by email or telephone.