Used Hole Punching Machine for sale (92,921)

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Hsdpfx Aaoxgnhajbenu Drilling specifications: - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: BX 1103403A, sheet thickness (max.): 3 mm, type of input current: three-phase, Contact us for more information. Hnedowp Aa Sspfx Aabeu

Year of construction: 2000, condition: refurbished (used), LOCH Deep hole drilling machine TB 1-4/E-600/2 (reconditioned used machine) Working depth: max. 600 mm Working diameter: solid drilling 4 - 25 mm diameter in steel Number of spindles: 2 deep drilling spindles maintenance-free with lifetime grease lubrication Drilling spindle receptacle: Short taper according to DIN 55027, size 5 Center height: 250 mm Center distance: 203.2 mm Drilling system: single lip drilling Main drive: 2 x 5.5 kW drive power per spindle, steplessly adjustable by frequency regulated three-phase motor, power constant for the entire speed range. Speed range: 1000 - 6000 min-1 Feed rate: Through infinitely variable three-phase servo drive via recirculating ball screw and backlash-free preloaded nut. Feed range: 0 - 300 mm/min Extended feed range on request possible up to max. 6000 mm/min Rapid traverse: 6000 mm/min back and forth Coolant supply: Internal coolant supply through drill spindle via carbide mechanical seal. Spindle slide: Stable construction with mounted spindle spindle blocks in special construction, whereby the spindle bearings are provided with lifetime lubrication and are maintenance-free. Guide system: Machine bed with screwed-on, hardened and ground linear guides. Spindle slide moves via circulating rolling elements, feed vibration-free and without stick-slip effect. Drill bush support: Firmly connected to the substructure and with removable upper part for easy and quick change of drill bushings or the coolant supply units. Machine base: Strongly dimensioned welded construction, stress-relieved annealed. Clamping table: Table plate in special cast design firmly mounted on the substructure with T-slots, whereby the center groove is aligned with the drilling axis and serves as a guide groove for the accommodation of clamping elements. Control: SIEMENS Sinumerik 840 D (Retrofit) Workflow: Individual functions for setting up the machine via pushbutton control. Semi-automatic for manual loading via program start. Machine monitoring: With display of spindle speed, feed rate, drilling depth and coolant pressure. Hodpfx Aoikqrfoabonu Protective device: The tool area of the machine is protected by a sliding door, which is electrically linked to the control, against unintentional and unauthorized opening during during the working process. Electrical equipment: All electric motors according to IEC standard. Separate electrical cabinet with all electrical necessary for the operation of the plant safety and control equipment. Machine operation from control panel conveniently located in the working area. Machine can be inspected and tested at any time if interested. MORE INFO ON REQUEST

Condition: like new (used), Year of construction: 2003, Pivatic Automatic Line - Pivatic 800mm coil width uncoiler with sheet straightener and roller feeder- hydraulic Type: SMTCL 800 T5 Year of construction: 2003 - Pivatic hydraulic punching machine Type: PCC80 TTI Year built: 2003 Max pressure punching machine equipment: - two tool blocks AXIS Z1- 24 stations (A-12pcs,B-6pcs,C-4pcs,D-2pcs,E-2pcs). AXIS Y1- 24 stations (A-12pcs,B-6pcs,C-4pcs,D-2pcs,E-2pcs). -guillotine - unloading conveyor (conveyor belt) with additional moving table for sorting workpieces - unloading conveyor (conveyor belt) -control panel (SIMENS) - Hydraulic longitudinal bending module with working range of 1750mm Pivatic Type: FLN 175 Year of construction: 2003 Bending line equipment: -gripper feeder AXIS X1 - rotary table with a diameter of 750mm -EIA W1 longitudinal bending with a length of 1750mm -gripper feeder AXE A1 -gripper feeder AXIS B1 -AXIS Q1 longitudinal bending with length 1750mm - gripper feeder AXIS X1 - unloading conveyor -control panel (SIMENS) - clamping and bending tools with the possibility of setting to size -transport of workpieces is carried out on brush tables -Hydraulic transverse bending module with a working range of 800mm Pivatic TYPE: FSW 80 Year of construction: 2014 Bending line equipment: -loading conveyor (belt conveyor). -OŚ A2 transverse bending with a length of 800mm -OŚ B2 transverse bending with a length of 800mm - unloading conveyor (belt conveyor) -control panel (SIMENS) - clamping and bending tools with the possibility of setting to size Hodpfotp Ta Eox Aabonu -the whole line is equipped with a safety system (light curtains SICK) - cooling system Highly efficient device. Greetings,

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Weight 4,500 kg Machine is without oil; which has been drained upon removal Hnjdpfx Aeud Rhveabsu All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: new, Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, Workpiece Clamping Diameter : ø 3 – 140 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 100 mm Workpiece Weight : max. 170 kg Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Grinding Process : Semi-Automatic, CNC Control Panel : Beckhoff CNC Movements : Z-Axis Indurstry 4.0 Compatibility : Available Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Hjdpfxjgb Ec Hj Aabenu Dust Extraction And Filtration : Available (as a option) Sectors : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Easy to Use CNC Control Panel: Benefit from very simple operation and grinding program recording with the Beckhoff control panel and Z-axis servo movement. Industry 4.0: Fully compatible with Industry 4.0 applications, thanks to the Beckhoff control panel. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex SA-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex SA-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Z-Axis movement is provided by servo motor in CNC form. The part is loaded-unloaded and clamped manually. Settings are made from CNC control panel and grinding is started by pressing the start button. No other manual setting or control is made during grinding. Contact us for more details.

Year of construction: 1983, condition: used, machine/vehicle number: 1338-5, pression power: 30 t table siize: 500 x 700 mm stroke: 50 mm tappet boring: 40 mm breakdown hole in table: 100 mm total capacity needed: 380 V, 11 kW Hnedpfo N Hcgjx Aabju weight: 2000 kg space needed: 1000 x 2300 x 2170 mm

Year of construction: 2009, condition: ready for operation (used), A high-precision CNC drilling/reference hole machine Mach3 Lab with X-ray vision system is available. Travel X/Y: 700mm/800mm, max. panel dimensions X/Y: 700mm/700mm, min. panel dimensions X/Y: 300mm/200mm, panel thickness range: 0.3mm-6mm, Z-axis stroke: 40mm, spindle speed: 30000rpm, positioning accuracy: +/-0.003mm, transducer resolution: +/-0.001mm, X-ray range X/Y: 700mm/580mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Hedjxd Avgspfx Aabonu

Condition: good (used), Year of construction: 2003, Bobst SPrintera 106 PER, Last overhauled in 2023 The machine is in EXCELLENT condition, can be inspected in production at any time, and is immediately available. Machine Specifications: - NON Stop Feeder with automatic lateral shifting of the pile tray - Feeder with POWER REGISTER, double sheet detection, automatic tension control, and sheet guidance - Krifft & Zipsner Pallet Infeed System - Die Cutting Unit with Centerline System - 2 Stripping Stations with Bernoulli System - Blank Pile Delivery with automatic pallet changing device Technical Details: - Paper min. 70 gsm - Board up to 2000 gsm - Corrugated board up to 4 mm - Max. sheet size: 740mm x 1060mm / 29″ x 41.75″ - Min. sheet size: 350mm x 400mm / 14″ x 15.75″ - Max. mechanical speed: 12,000 s/h - Cutting force up to 2.6 MN Hnsdpfx Asw Trg Ioabeu - Max. pile height at feeder and delivery: 1700 mm / 67″ - Main motor power: max. 22 kW - Total connected load: max. 63 kVA Krifft & Zipsner logistics installation, new hydraulic pump, and all worn parts replaced.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,899 h, Other machines and tools included with the machine: - Tools belonging to the machine (a detailed list can be provided) - Quick Sharp - Multiset ITM BASIC MACHINE: TruPunch 3000 Large Format (S11) Machine Configuration: • C-frame structure • Coordinate guidance system • Linear magazine with 24 stations for clamps and tools • Hydraulic clamps (3 units) • Maintenance-free 3-phase servo motor drives • Repositioning unit with programmable stripper • Foot switch for clamp closure • Part removal flap • Transport and assembly fixtures Punching Head: • Servo-electric punching head • Rotatable single tool adapter • Manually adjustable press foot force • Programmable press foot positioning • Tool length compensation • Spray lubrication system for punches • Vacuum slug removal • Forming capability • Adjustable stroke rate • Tool lubrication level monitoring Control System: • TRUMPF controller based on Bosch Rexroth IndraMotion MTX • Control panel with 17" TFT display • Integrated technology database • Internet-based teleservice interface • Automatic shutdown function • NC program management • Production planning feature Data Transfer: • USB and network interfaces • Network connection (RJ45) Safety Features: • CE marking • Multi-beam light curtains • Rapid drive shutdown Advanced Standard Equipment: • 1st index pin position, right-hand inner side • Ball transfer tables • Finished parts container • Scrap/chip container OPTIONAL BENEFIT PACKAGES: 2. Productivity Package • MultiTool function • Sensor for part chute • Spray die lubrication with level monitoring 3. Punch Quality Package Hodewm Shaopfx Aabjnu • MultiShear function • Deburring and roller technology • Adaptive stroke calibration 4. Forming Package • Tapping function with breakage detection • Marking/rapid beading function • MultiBend function • Height-adjustable clamps 5. Engraving Function 6. Smart Punch Monitoring 7. Wireless Operation Point 8. MobileControl App 9. 21 RTC cartridges + TOOLS!

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Hnjdpfx Ajv Nwwaoabju Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Hardened die-cutting plate and device plate. This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg The die-cutting section is transported separately from the Spiess insert and must be assembled. The electrical switch cabinet is fully plugged in with the components.

Year of construction: 1996, condition: ready for operation (used), General Data Measurements width 2692 mm Measurements depth 5740 mm Measurements height 2387 mm Machine weight 10115 kg Hjdpfx Asxadp Tjabonu This STRIPPIT 1250SL/30 was manufactured in 1996. It features a robust 30 metric tonne punching capacity and a turret drive with 33 stations. The machine can handle a maximum stock size of 1,524 x 3,048 mm and thickness up to 83.8 mm. Ideal for high-speed precision with a maximum axis travel speed of 63,500 mm/min. Contact us for more information about this machine. Application Types Punching

Condition: refurbished (used), functionality: fully functional, Mechanical roller feed BBV190/85 for attachment to BSTA50 Hedpfx Aer Hmprjabjnu Left-hand attachment Drive via main shaft / cardan shaft of the press - cardan shaft / mounting plate is not included in the scope of delivery Mechanical feed length adjustment via spindle PTO shaft protection system tube Including encoder attachment

Condition: good (used), Year of construction: 1997, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 5820387, punching force: 30 t, total height: 2,000 mm, total width: 5,000 mm, total length: 15,000 mm, sheet thickness steel (max.): 8 mm, working range: 3,000 mm, type of input current: three-phase, travel distance X-axis: 2,500 mm, Amada VIPROS 358 KING + LKI L III 250 automatic loader + PR III automatic unloader + noise protection cover . It can work complete automatic , also sorting your parts on the pallet . The machine was verry well mentained , we bought this machine and did not finish installation because we bought a new machine . The machine has SICK light barriers and original protection fences . For more informations please contact me . CNC AMADAN 04 P-C N. 2 pneumatic punches Brush table for low noise operation & scratch free processing Device for automatic repositioning of the sheet metal Air Blow automatic tool lubrication Hnjdpfjvb Dn Asx Aabou

Condition: good (used), Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 300 kg, table width: 400 mm, overall weight: 870 kg, table length: 300 mm, Electrode diameter 0.1 - 3 mm Electrodes available in brass, copper, or carbide Suitable for starter hole drilling in steel, aluminum, hard metal for wire EDM or for precise, deep, narrow boreholes Manual or CNC-controlled programming cycle Approach cycles Includes pump and collection tank on castors Hedpfx Ajw Dqdneabenu Includes drill chuck and seal for 1.5 mm electrodes Machine can be inspected or tested under power at any time.

Condition: excellent (used), Year of construction: 2011, operating hours: 13,900 h, functionality: fully functional, Machine is in very good technical condition. Despite it`s age, wear is very low. It was used for individual special production, not for serial. Machine is placed and connected at K-system company in Žiar nad Hronom, Slovakia. There you can see it personally. Price is negotiable. Hnsdpfx Aoxbdausabeu

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE Hsdpfxetyqizo Aabonu

Condition: good (used), Year of construction: 1987, functionality: fully functional, Bobst SP 142 ER Year 1987 Max. Size: 1020x1420 mm Min. size: 700x520 mm Max. Speed: 6000 Sh/h Max. Cutting force: 600 T Centerline Hedevhcgqjpfx Aabenu Micrometer setting in production

Condition: used, sheet width 750 mm plate length 1250 mm plate thickness 4 mm Hnedpfx Ajxfb Hmjabsu table surface area 1600 x 1050 mm no. of strokes 180 Hub/min max. punching diameter 105 mm punching pressure 25 t total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools

Condition: excellent (used), Year of construction: 2009, operating hours: 20,709 h, 2 spindles Drilling data: Hnodpfx Aaeww Ihqjbsu Spindle 1 (4 kW) 5-18 mm Spindle 2 (1.2 kW) 1-4 mm Spindle speed: Spindle 1: 600 - 6,000 rpm Spindle 2: 2,000 - 24,000 rpm Drilling depth approx. 1,200 mm (with Ø8mm and use of 3 steadies) Rapid traverse 15,000 mm/min Carriage stroke 1,800 mm Machine weight: 7,500 kg

Condition: used, total height: 5,100 mm, total width: 2,600 mm, pressing force: 65 t, For sale: Schuler toggle drawing press PK No. 630 Hnjdswab T Eepfx Aabeu

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Performance features - Minimal maintenance required Hodpexduclofx Aabonu - Highly efficient - User-friendly operation - Fastest changeover between formats Technical data - Working width: 500 mm - Maximum punched page format: 500 mm - Maximum unpunched page format: 500 mm - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels - Adjustable edge distance - Punching unit can be selectively deactivated - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg

Condition: used, Year of construction: 1993, operating hours: 24,535 h, functionality: fully functional, Haulik und Roos Press RVD 80-800HS Pressing force: 80 t Adjustable ram stroke: 4 - 60 mm Ram adjustment: 0 - 80 mm Table clamping area approx.: 780 x 640 mm Ram clamping area approx.: 800 x 460 mm Strokes per minute: 30 - 800 min⁻¹ Feeder MD 260 SL 2794 Feed length 0-260 mm Maximum material thickness 3 mm Material width 10-260 mm Hsdpfjwz Urkjx Aabenu Strip speed 60 m/min Used condition Sale on behalf of customer

Condition: good (used), Year of construction: 2008, functionality: fully functional, BRAUSSE 1450 SE Year: 2008 Max. size: 1055 x 1450 mm Max. cutting force: 400 t Hnodpfx Aet D Ncaeabou Max. speed: 5500 Sh/h Quicklock system Centerline in production

Condition: good (used), Year of construction: 2002, Bobst SPO 160 ER - Matic Year: 2002 Hsdpfx Aewxu Iyeabonu Max. Size: 1620x1120 mm - Prefeeder Bobst C-160E Matic - Transfer and aligning section with side and front alignment - Die-cutting section with Centerline - Stripping station with Quick Lock System - Blanking station with Quick Lock system - Chase loader for preparation of the cutting die outside the machine - Integrated palletizer with batch control unit - Computer with Matic setup and control system