Used Hole Punching Machine for sale (65,989)

Condition: used, Year of construction: 2016, machine/vehicle number: M99955/3533513, Pipe Cutting Machine FZH VARIO 2 with 2.9m Magazine (Year 2016) Automatic pipe cutting line VARIO 2 by FZH Maschinenbau GmbH, manufactured in 2016. This line is designed for the cutting to length of round pipes and has been used in serial production of furniture fittings. The system comprises a magazine with singling system, feed unit, pipe cutting head, as well as extraction and deburring unit. Application areas: – Automatic cutting of round pipes in series production – Pipe diameter approx. Ø 6.0–78.0 mm – Wall thickness approx. 0.1–1.5 mm (plastics up to approx. 2.0 mm) – Cut lengths from approx. 70 mm, with typical lengths from 200–1,200 mm – Suitable for steel pipes (e.g., E195) and various other pipe materials Machine basic data (extract from manufacturer documentation): – Pipe diameter (outside): Ø 6.0 mm to 78.0 mm – Wall thickness: 0.1–1.5 mm (plastics up to 2.0 mm) – Cut lengths: 70–700 mm in one feed cycle, longer lengths by repositioning – Minimum cut length: 70 mm – Shortest scrap length: 150 mm – Pipe input: by the meter or from coil Itjdpfx Aox Hqd Tsdwsb – Cycle time for cutting only: approx. 4 s (material dependent) – Feed time for 200 mm pipe length: approx. 2 s – Feed time for 500 mm pipe length: approx. 5 s – Feed time for 1,200 mm pipe length: approx. 16 s Condition / maintenance: – Well-maintained used condition from family business – System was regularly serviced – Technical documents (offer, layout drawing, specifications) available – Photos of the complete line including magazine and deburring unit available Inspection possible by appointment. Dismantling and loading can be organized in coordination with the buyer.

Condition: used, Year of construction: 1998, machine/vehicle number: 100057, 1998 AMADA VIPROS 2510 KING The punching machine is in good condition, always serviced on time by Amada service. All documentation is included. This machine can be operated with a punching force of 196 kN. Made in Japan. The punching machine is still under power and can be tested at any time in Vilnius, Lithuania. Specification: Model: AMADA VIPROS 2510K Serial no: 100057 Year: 1998 Made in: Japan Punching force: 20 tons Stations: 31 Tools: included (RO 6; RO 6,5; RO 3; RE 30x5; RE 25x5; RE 80x5; RO 5; RO 3,5; RE 10x3; RE 10x5; RE 50x5; RE 8x12) Maximum sheet thickness: 3 mm X-axis movement: 2500 mm Y axis travel: 1270 mm Weight: 11 000 kg Location: Vilnius, Lithuania Testable: Yes If you have any questions, please do not hesitate to contact us. Iedom Ncayjpfx Adwotb

Condition: excellent (used), Drilling capacity -16mm MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Isdpfxjq Dlzne Adwstb Marcels Maschinen AG

Condition: not inspected (used), Euromac hydraulic punching machine Inventory no. 3723 * Manufacturer: Euromac * Model: XP 950/30 CNC * Capacity: 30 t * Throat depth: 950 mm * Strokes: 180 strokes/min * Table size approx. 4000 x 1300 mm Iodpfx Aex Iwryjdwotb * Cabinet with accessories

Condition: good (used), Year of construction: 2011, machine/vehicle number: 35114, feed length X-axis: 600 mm, feed length Y-axis: 300 mm, feed length Z-axis: 600 mm, total length: 3,500 mm, total width: 1,500 mm, total height: 2,100 mm, overall weight: 2,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,000 mm, table width: 680 mm, feed length W-axis: 650 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, DRILLING CAPACITY: - Twist drill diameter: max. 16 mm Itodpfewxq E Uox Adwob - Single-lip drill: 4–16 mm - Thread cutting: max. M12

Condition: good (used), Year of construction: 1989, functionality: fully functional, Revision 1989 Pressing force: 2x200 kN, Strokes: 40 - 300 strokes/min. Ijdpfx Asxx T Hfjdwstb Stroke: 50 mm, Clutch: pneumatic, Power supply: 380 V, Machine weight: 2,200 kg, additional ejector, factory version with reinforced design

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm Iedpfx Adex Hzr Iewstb throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Maximum stroke 30 mm Weight 295 kg

Condition: used, Year of construction: 2017, Number of drilling spindles: 21 pcsPitch: 32 mmDrill chuck: Clamping surface of drill shank: 10 mmOperation: foot pedalTools included: yesDrilling direction: from below & end faceTilting: manualTilting angle: only 0° or 90°Max. pass-through height: 80 mmMax. pass-through width: 750 mmNumber of material clamps: 3 pcsType of material clamping: pneumaticDesign: stationaryStop system: only for structural seriesWeight approx.: 400 kgMotor power: 1.5 kWDust extraction diameter: 120 mmStorage location: with customer Iedpfx Asihghredwjtb

Condition: used, Year of construction: 2022, New demonstration machine! List price: €13,610.- 400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration with: Fully automatic electronic control with impulse operation via foot pedal for clamping-drilling-unclamping, automatic electrical return of the drilling unit once the set drilling depth has been reached, automatic adjustment for increased drill depth when end-faced drilling saves need to reset the depth for surface to edge drilling operations (+10 mm; e.g., for dowel length 35 mm, surface depth 14 mm and edge depth 24 mm). 1 drilling beam with 21 spindles, 32 mm center distance, 1.5 kW motor (drill feed 0-70 mm). Incl. 21 quick-change chucks (Ganner system) for easy bit exchange; multi-position swivel drilling unit from 0° to 90°, supported by gas spring. 1 clamp carrier, movable along the Y-axis with 3 pneumatic clamps, for workpiece height up to max. 80 mm. Comprehensive stop system includes: 1 1800 mm stop rail for shelf drilling (aluminum profile 40x40 mm) with 3 locator stops, quick-change system, easily switchable from right to left side for mirrored shelf drilling in cabinet construction; also usable for line boring in System 32. Limit stops and position settings as well as drilling height position over the support table with mechanical digital stop. Stops can be easily swung away for the quickest changeover from cabinet to frame and arm extensions for clamp carrier executed for line boring positions up to max. 300 mm. Ideal three-stage tool system. 1 set of dowel drills: 5 carbide dowel drills, Ø 8x77 mm, right; 4 carbide dowel drills, Ø 8x77 mm, left. Additional features: Extraction funnel, dust-tested, Ø 120 mm. Set for line boring in System 32 complete with: 2 guides with scale and adapter for position max. 300 mm, 2 pairs of locator cams for line boring for Y-position 37 mm and e.g. 300 mm, 1 base rail 1000 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 set of drills: 11 carbide line boring drills, Ø 5x57 mm, right; 10 carbide line boring drills, Ø 5x57 mm, left. Hydraulic brake cylinder. Clamping cylinder with holder, additional. Location: Itsdsqw Ek Iopfx Adwob

Year of construction: 1991, condition: used, functionality: fully functional, Industrial punching machine for processing aluminium and PVC profiles.The machine is fully operational and suitable for a wide range of applications in metal construction. Technical data: • Manufacturer: elumatec Itedjw Tcrhepfx Adweb • Model: ST 225 • Punching force: 6,000 kp at 10 bar • Year of manufacture: 05/1991

Year of construction: 1997, condition: used, functionality: fully functional, Industrial punching machine for processing aluminium and PVC profiles.The machine is fully operational and suitable for a wide range of applications in metal construction. Itjdpfxow Tcpyj Adwob Technical data: • Manufacturer: elumatec • Model: ST 225 • Punching force: 6,000 kp at 10 bar • Year of manufacture: 05/1997

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Itjdpfxoxn Tywo Adweb Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: new, Year of construction: 2026, Drilling and dowel inserting machine for simultaneous drilling, gluing and dowel inserting in the of System 32 mm through multi spindle drillhead and adjustable doweling stations. Itodpfx Adodx Aw Nswjb Short introduction: • Universal drilling and dowel inserting machine • Simplest operation • Closed gluing system • Suitable for panel and solid wood processing • Optional, additional vertical drilling unit • Relieves CNC machining centers • Optimal complement to nesting machines

Condition: ready for operation (used), A hydraulic profile-steel/universal steel shear with integrated punching unit Muhr & Bender is available. Punching force: 500kN, punching capacity for 15mm steel: 25mm, punching stroke: 60mm, stroke rate: 47/min, throat depth: 750mm, installation height: 215mm, working height: 1150mm, flat-steel cutting capacity X/Y: 180mm/20mm. Machine dimensions X/Y/Z: approx. 1500mm/900mm/1900mm, weight: approx. 2000kg. Includes various round and slotted punches with dies. An inspection on site is possible. Iedpfx Adox E Adpjwotb

Condition: excellent (used), This machine was overhauled in 2025 and is therefore in like-new condition! Technical data: - Min. drilling diameter 16 mm - Max. drilling diameter 35 mm - counter boring 65 mm - Max. drilling depth 1,400 mm using BTA method - Required machine footprint approx. 6,100 x 3,100 mm - Max. machine height 2,400 mm - 2 separate drilling units, mounted on base machine bed, spindle distance 600 mm - Flat guideways - Feed drive via ball screw and feed gearbox - Rapid traverse speed 4,000 mm/min - Feed speed max. 230 mm/min - Drive power per drilling spindle: 11 kW (2 pieces) - Infinitely variable speed up to max. 6,000 rpm Iedpswq I Iqefx Adwotb - Hydraulically attachable tailstock with counter run - Tailstock manually movable on base plate with T-slots - Enclosure with sliding doors - 1 steady rest each - 1 rotating clamping bell holder, basic holder each - 2 pre-centering devices each - Drilling depth control via cams and limit switches - CNC control SFT and FU, connection 380 V / Rated current 80 Amp. - Each unit has its own control and own feed motor With this machine you actually receive 2 single-spindle machines, as each spindle is operated separately with its own control and feed motor.

Condition: refurbished (used), 2-spindle deep hole drilling machine under reconstruction Itodpfxjx E U S Eo Adwob

Condition: reconditioned (used), functionality: fully functional, Push-rod drilling unit AYEN, electro-pneumatic push-rod drilling unit, Type RPM-S4, 3.0 kW, 2850 rpm, 4 units in stock Itedpoqv Ey Usfx Adwjb

Condition: used, Kann zum Stanzen von Papier, Pappe und Aluminimum eingesetzt werden. Can be used for punching Paper, Cardboard and Aluminum. Stanzmaschine / Punching machine Krause FY 43 UB  Serial-No. 313200 Arbeitsbreite / Working width max. 400mm Zum Stanzen von Papier, Pappe und Aluminimum For punching Paper, Cardboard and Aluminum. 2 Hand-Auslösung / 2 Hand release Itodpfx Ajxu N Evodwob mit Fußschalter pneumatisch zum Fixierung des Produktes with pneumatic foot switch for fixing the product Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1993, functionality: fully functional, Speed: up to 8,000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Die-cutting force: up to 2.5 MN (250 t) Itodpfxjx Anvpj Adwob Operating hours: approx. 38,000 hours Equipment / further details: Stripping system (stripping station) with centering frame Tools

Condition: excellent (used), DETEL M9 Pneumatic Drilling Machine Pneumatic feed of the unit Adjustable drilling depth Pneumatic material clamping Iodpfsxnzxbjx Adwetb Capable of vertical and horizontal operation Head with 9 spindles Spindle pitch: 32 mm Spindle motor: 1.1 kW

Condition: good (used), Year of construction: 1993, functionality: fully functional, Fitting drilling machine WÜRTH, type Prebomat 192 plus hole row head with 11 spindle, good condition with base cabinet Itsdpfsv T Rk Uox Adwjb

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control Ijdpexmfc Uofx Adwstb - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: good (used), Centre bore 2- 50 mm Diameter of workpiece 8 - 125 mm Lenght of workpiece 50 - 1000 mm Ijdporivluofx Adwstb Grinding wheel speeds 13'000 - 45'000 rpm Misc.accessories MARCELS MASCHINEN AG

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock -Tank -pump -Filter Itedpfx Aohuil Rodweb

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter 5-30 mm - Drilling depth 750 mm Isdpfx Ajxzz Hjdwstb - Filter - Pump