Used Hydraulic Cold Press for sale (25,222)

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,8 x 1,3 x 2,4 m Hodpfoyfwvlox Aa Ssff with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation as is where is, WITHOUT additional work, free loaded to truck

Condition: good (used), Year of construction: 1987, machine/vehicle number: 8754-08, Offer 26124 Technical Data: - Max. working width: 6050 mm - Max. material thickness at 40 kp/mm² tensile strength, steel: 1.0 mm - at 20 kp/mm² tensile strength, aluminium: 1.5 mm - at 80 kp/mm² tensile strength, V4A: up to 0.6 mm - Electronic bending angle preselection - Hydraulic lifting and lowering of the upper beam and bending beam - Manual rotary shear Hodpfjyzgqljx Aa Soff - Drive: 400 V - Space required: approx. W 6800 x H 1550 x D 1700 mm - Weight: approx. 1900 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, pressing force: 150 t, overall weight: 1,400 kg, Equipment: CE marking, We are offering this quality Sahinler 1020-150 workshop press, hydraulic press, 150 tons, year of manufacture 2012. - Adjustment of closing stroke with fine tuning - Table height adjustable - Automatic pressure cut-off at set pressure - Separate 2-hand control panel - Table plate with T-slots for T-nuts - Ram plate with slots - 2 machine guide columns for the upper ram plate Fully functional The machine can be demonstrated on site Hardly used, only for prototype production Single owner Hfedpfx Asyzl Amsa Ssf Dimensions as per data sheet Loading on site possible. Weight approx. 1.4 t Original price approx. €21,000 net No warranty or guarantee If you have any questions or require more information, please feel free to send us a message or call us.

Condition: new, pressure: 100motor: 15daylight: 500stroke lenght (max.): 400table diamension: 800 x 600tappet area: 800 x 600table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.750weight approx.: 5.500oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 230mm. Auxiliary cylinder: 2 pcs. Ø 50 x 30mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 11kw. - 15hp. ( IE-3 ) Pump: 23Liter / ASC. Speed : flow 110mm./sec. - return 200mm./sec. - Pressure : 9 mm/sec. Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 - (with T - grooves) Plunger plate: 800 x 600 - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting Hodpfx Aaem Nntye Seff 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3500 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2800motor: (IE-3) 22Return speed: 50messurements (LxWxH): 3500 x 3200 x 3600Cylinder: Ø 370- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: Rexroth (CE valves) - Control system: Siemens S7-1200 Hedpfxer Etule Aa Soff - Siemens KTP.7'' screen - Control cabinet is mounted on the side wall of the bridge - Swiveling control panel - Pressure adjustable via screen (50 - 300 t) - Speed adjustable via throttle valve - Cylinder clad in chrome - Remote control (with cable) - Stroke length adjustable via distance sensors - 400V 50HZ 3 phases - Anti-rotation device for cylinder - Cylinder can be moved sideways via drive motor - Bridge can be moved via drive motor - Stairs - Light barrier protection for bridge areas - Cylinder piston mandrel: Ø 200 / 400 / 600mm. Long , Extension mandrels (3 pieces) are included

Condition: new, stroke lenght (max.): 400performance of pump: 45cc-65motor: 22table height: (ohne Auflageplatte) 750 mm - (mit Auflageplatte) 820table area: 3000 mm x 2000 mm - Lichteweite : 2200Travel bridge: 2300motor: (IE-3) 22Return speed: 50- Capacity: 3000kN. (280 bar – 300 ton) - Cylinder: Ø 370mm. - Table surface: 3000 x 2000mm - Clearance: 2200mm. - Travel bridge: 2500mm. - Lateral travel cylinder: 900 + 900mm. away from the middle. (1800mm.) - Installation height: max. 1200mm. (distance table or support plate to cylinder piston) WITHOUT MANDS Hfsdpfx Ajr D U I Doa Sjf - Stroke length: 400mm. - Pump: 45cc – 65Lt./min. - Forward speed: 10 - 5mm / sec. - Return speed: 50 mm / sec. - Engine: 22kw. (IE-3) - Table height: 750mm (without support plate) - 820mm. (with support plate) Accesories: - Hydraulics: DUPLOMATIC  - Control: LENZE & SCHNEIDER  - Control cabinet is mounted on the side wall of the bridge  - Pressure adjustment via rotary valve valve  - Speed adjustable via throttle valve • Cylinder covered in chrome  - Remote control (with cable)  - Stroke length adjustable via distance sensors  - 400V 50HZ 3 phase  - Rotation lock for cylinders  - Cylinder can be moved laterally via drive motor  - Bridge can be moved via drive motor  - Soft starter for motor  - Cylinder piston mandrels: Ø 200 / 400 / 600mm. Long Extension mandrels (3 pieces) are included

Year of construction: 2011, condition: ready for operation (used), General Data Machine weight 4700 kg Control Unit Brand AMADA Main Drive Pressing force 500 kN Stroke 200 mm Number of axis 8 This 8-axis AMADA HFE M2 5020 was manufactured in 2011. It features a hydraulic press brake with a maximum press force of 500 kN and a stroke up to 200 mm. Weighing 4,700 kg and operating at a noise level of 74 dB(A), it's CE certified and made in France. If you are looking to get high quality bending capabilities consider the AMADA HFE M2 5020 machine we have for sale. Contact us for more information. Application Types Hedpex D H I Hjfx Aa Soff Bending

Condition: good (used), Lechner IV B Hydraulic Bookbinding Press The machine is ready to operate. The press has a built-in hydraulic unit. Four stations. Hfodpfxjymxn So Aa Ssf Irreplaceable in bookbinding for the production of books, pads, etc.

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Hsdpfoyupulox Aa Ssff Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: as good as new (ex-display), Year of construction: 2024, pressure 100 t stroke 300 mm table surface area 1070 x 260 mm column travel between the guideways 1070 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec oil volume 90.0 l engine output 5.5 kW weight of the machine ca. 1500 kg. dimensions of the machine ca. 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon request Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod * including round steel chain and 2x locking bolts * Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: * 1x delivery speed * 1x working speed * 1x retreat speed - Piston can be stopped in any position Hjdpfx Asxabcwja Sjff - Hydraulic tank mounted on the side - Operation manual

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use Hedpfx Aajxaabfo Sjff - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: new, neu ca. 8 Wochen ab Auftragse Italien 11000 € 211.2 € 50 to fix 350 mm 900 mm 900 mm max. 9 mm/s 0,75 kW 1700 mm 700 mm 2100 mm 650 kg The hydraulic movement of the piston is controlled by a handwheel, which enables very sensitive and precise positioning. One-handed operation is possible thanks to the working speed of less than 10 mm/s. Hfjdpfxewiq Ahs Aa Ssf Very suitable for straightening and pressing work. The cylinder can be moved sideway by handwheel (only "M" versions)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 5500 € 106.15 € 30 to fix 775 mm Hfsdpfsypbxfex Aa Sof 5 mm/s 10 mm/s 1500 mm 700 mm 2015 mm 400 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 8900 € 171.77 € 100 to fix 300 mm 1570 mm 220x160 mm 5 mm/s 10 mm/s 2500 mm 1000 mm 2200 mm 1600 kg steel welded frame stop at any position pressure manometer safety valve against overloading Hodpfx Aaoypbw Us Soff 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 6500 € 125.45 € 70 to fix 900 mm 900 mm 1700 mm 700 mm 2100 (PSS: 2300) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € Hodpjypbwzjfx Aa Sjff 8.700,00

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 8600 € 165.98 € 100 to horizontal verschiebbar 900 mm 1050 mm 1900 mm 1000 mm 2250 (PSS: 2400) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 100 M TL: 1 speed 4 mm/s, single-hand control with lever € 8.600,00 PSS 100 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 9.300,00 PSS 100 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 9.900,00 Hfjdpfsypbwuex Aa Sof PSS 100 M: same as PSS 70 M NC but with stroke 500 mm € 11.400,00

Condition: new, Year of construction: 2023, neu 2023 7295 ca. 12 Wochen ab Auftrags Türkei 22750 € 436.8 € 150 to fix 1520 mm 300 mm 1520 mm 610 mm 9 mm/s 5 mm/s 10 mm/s 10 mm 600x1520 mm 100 mm Hsdpfx Aajypbwnj Soff 190 mm 2630 mm 1000 mm 2450 mm 3270 kg 2 guidings big upper tool holder and table with t-slots upper and lower pressbrake tool manometer rapid down move with automtic change to working speed piston stops in every position 2 hand panel and foot pedal Tisch höhenverstellbar according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6500 € 125.45 € 60 to fix 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg Hfedpfxeypbwhs Aa Sof steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7300 € 140.89 € 60 to horizontal verschiebbar 250 mm 1040 mm 180x120 mm 4 mm/s 10 mm/s 1710 mm 700 mm 2100 mm 800 kg Hfodoypbwbopfx Aa Sof horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 6200 € 119.66 € 30 to horizontal verschiebbar 200 mm 775 mm 125x80 mm 5 mm/s 10 mm/s 1500 mm 700 mm 1800 mm Hjdpfxjypbv Rs Aa Seff 400 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 11500 € 220.8 € 150 to fix 300 mm 1570 mm 280x200 mm 5 mm/s 10 mm/s 2500 mm 1000 mm Hedpsypbv Defx Aa Sjff 2270 mm 2100 kg steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 10200 € 195.84 € 150 to fix 300 mm 1070 mm 280x200 mm 5 mm/s 10 mm/s 2050 mm 1000 mm 2270 mm 1870 kg steel welded frame stop at any position Hodpfx Aajypbvwo Soff pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6-8 Wochen ab Auftrag Italien 5000 € Hfjdpoypbvqjfx Aa Ssf 117.73 € 40 to fix 900 mm 900 mm 1600 mm 700 mm 2050 (PSS: 2250) mm The table can be lifted with a chain Hydraulic unit with motor and pump Adjustable maximum pressure Manometer Equipment compliant with CE regulations. Operating instructions in German and English. MODEL VERSIONS: PSS 40 TL: 1 speed 4 mm/s, single-hand control with lever € 5.000,00 PSS 40 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 5.800,00 PSS 40 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 6.100,00 PSS 40: same as PSS 40 NC but with stroke 500 mm € 7.000,00

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 30900 € 590.19 € 200 to horizontal verschiebbar 300 mm Hfedpfsypbvksx Aa Sjf 1900 mm 320x210 mm 5 mm/s 20 mm/s 2460 mm 1600 mm 2700 mm 4800 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH (sample photo shows mod. HDK 1570/150)

Condition: new, neu ca. 4 Monate ab Auftragse Italien 70000 € 1323 € 300 to fix 500 mm 1500 mm 20 mm/s 2 mm/s 2800 mm 1500 mm 3200 mm 6000 kg table with integrated cylinder to lift the workpiece control by levers as well as control panel (2- hand) regulable maximum pressure Hfedpfsypbvdex Aa Ssf Manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo)