Used Kotz Und Soehne for sale (5,392)

Condition: used, tank capacity: 1,100 l, GENERAL Equipment: Spray head Design: vertical Remarks: Original drawing available; vessel was modified at the end of 1996 (test report available, no modification drawing); 1 welded bracket inside the vessel Speed: 705 rpm Outer diameter: 1,400 mm Inner diameter: 1,200 mm Total height: 2,450 mm Heating/Cooling: available Insulation: available Power: 1.5 kW Max. permissible operating temperature: 150 °C Bjdpoxqaqbofx Afhslc Max. permissible operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Top head: removable/hinged top Mechanical seal: mechanical seal with thermal siphon vessel Agitator: propeller Base type: feet Location: Bremen Technical documents: drawing, TÜV certificates Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,100 litres Double jacket volume: 192.0 litres Wall thickness cylinder: 8 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 840 mm Last application: Pharmaceuticals VESSEL Max. permissible operating temperature: 150 °C Number of feet: 3 pcs HEATING/COOLING JACKET Bottom head temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head (DN 400) Outlet: DN80 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI 316) Feet material: stainless steel AGITATOR 1 Agitator manufacturer: PRG Voltage: 230/400 Volt TECHNICAL DATA / DIMENSIONS Head wall thickness: 8 mm Agitator arrangement: eccentric in the top head

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Lifting lugs Design: Suspended Remarks: Lugs made of steel; the insulation jacket has partially detached in the area of the lower base (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX guidelines under local conditions must be verified) Overall height: 3,750 mm Heating/Cooling: available Insulation: available Power: 2 kW Max. permitted operating temperature: 200 °C Max. permitted operating overpressure: 6.0 bar Max. excess pressure: 3.2 bar Mechanical seal: Mechanical seal with thermosiphon vessel Agitator: Beam agitator Support design: Feet Location: Bremen Cylinder tempering: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 liters Double jacket volume: 166.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last intended application: Pharmaceutical chemistry VESSEL Max. permitted operating temperature: 200 °C Number of legs: 4 pieces HEATING/COOLING JACKET Bottom tempering: Half-pipe coil Blodoxqah Hjpfx Afhjc INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: galvanized steel EQUIPMENT Manhole/dome: in top head (DN 500) Outlet: 140 mm MATERIAL SPECIFICATION Tempering system material: V2A 1.4301 (AISI304) AGITATOR 1 Voltage: 220/380 Volt Agitator mounting: central in the top head Agitator equipment: Provisions for flow breakers inside the vessel (flat plates for flow breakers not present; see photos)

Condition: used, Year of construction: 2018, tank capacity: 32,300 l, GENERAL Equipment: Crane lugs Design: upright Year of manufacture: 2018 Remarks: Double jacket with dispersing ring – suitable for non-pressurized temperature control only; maximum sterilization temperature inside tank 145°C; overall height specified per drawing External diameter: 3,000 mm Internal diameter: 2,785 mm Total height: 8,100 mm Heating/cooling: present Max. permissible operating temperature: 50°C Max. overpressure: 3.5 bar Support type: height-adjustable feet Location: outdoor storage Technical documentation: drawing, acceptance certificate, CE marking and declaration of conformity Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 32,300 liters Double jacket volume: 4,700.0 liters Cylinder wall thickness: 7.5 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 4,500 mm Last application: sterile tank in a dairy VESSEL Bsdpjx Dmckefx Afholc Max. permissible operating temperature: 50°C Number of feet: 4 pcs HEATING/COOLING JACKET Temperature control lower bottom: double jacket EQUIPMENT Manhole/dome: on upper head (DN 500) Outlet: present MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel TECHNICAL DATA / DIMENSIONS Lower bottom wall thickness: 7.5 mm Upper head wall thickness: 9.5 mm

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: M02-4-320, Deep hole drilling machine Bsdpex Ezllsfx Afhjlc For technical data, please refer to the attached images

Condition: reconditioned (used), Year of construction: 1982, Mubea / Muhr and Bender BFL 350: - Combined Profile-/bar steel shears with hole punch and notcher - Punching force 35 tons - punches up to Ø 28/23 mm in 10/12 mm sheet thickness - cuts up to Ø 30 mm / ■ 28 mm /∟ 90 mm x 8 mm / 150 mm x 13 mm / 80 mm x 16 mm Bedpfxsium Sts Afhjlc Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible.

Year of construction: 1998, condition: ready for operation (used), Steel saddle stitcher ST 100.1, year of manufacture 1998 1,223 operating hours. Manual system (expandable to 2) 4 double feeders Stitching station with lateral measuring control 2 Hohner 52/8 standard stitching heads 2 Hohner 52/8 eyelet stitching heads Lateral measuring control Three-knife trimmer with center cutting device transfer marking table shingle delivery Bsdpfxoq Rw Exe Afhelc 2 pumps documentation

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Tilting Spindle Moulder SCHNEIDER SH 1/2 Very good condition, the machine comes from an assembly company and was only used for modification work. In recent years it was no longer needed, which is why it is now for sale. Everything works perfectly. All bearings and guides are OK. Year of manufacture: 1990 The machine features an upper-mounted control panel. Blodjx Ncuvjpfx Afhjc Both stop jaws on the fence can be adjusted in depth, enabling jointing operations, e.g., when producing a glue joint profile. Equipped with spindle lock via lever. Very efficient chip extraction with 2 x 120mm extraction ports, one on the fence and one on the machine table. Fitted with a 30mm spindle, infinitely tiltable from -5 to 45°, spindle tilting is operated via a handwheel with a highly accurate mechanical dial indicator. With clockwise/counterclockwise rotation. We offer personal delivery and demonstration throughout Germany for €220.00, so you have no risk when purchasing. Shipping to Austria and the rest of the EU is available on request. Features a large table opening, which can be reduced with various rings (allows for safe routing with small cutters and usage of very large diameter tooling). Selectable spindle speeds: 3000, 4000, 5000, 6000, 8000, and 10,000 rpm. Maximum cutter diameter: approx. 280mm. Spindle height adjustment also via handwheel; includes a highly accurate mechanical dial indicator. Table is made of heavily ribbed cast iron. Interchangeable spindle (a 40mm spindle can also be fitted). Very robust and durable construction, designed for the heaviest routing tasks, suitable for all routing applications. Optimal power transmission via V-belt drive. Includes operating manual. Comes with a 3-roller power feeder ELU Type MVA 34, feed speed is infinitely adjustable from 3 to 23 m/min. Power feeder offers right/left rotation; feed rollers are individually mounted. Machine table dimensions: 1150mm wide x 840mm deep. Machine is ready for immediate operation. 380V, 4900 and 5800W via the two-speed motor. Approximate machine weight: 850kg. Equipped with motor protection switch against overload. Professional-grade, not DIY store quality. Optimal, simple, fast, and safe operation.

Condition: used, functionality: fully functional, Technical specifications (typical for the SK 500s model): Working area: approx. 500 × 500 × 500 mm Design: Tabletop or freestanding, compact Abrasive: Glass beads, corundum, ceramic beads, etc. Blasting principle: Injector principle (suction blasting) Compressed air consumption: approx. 200–400 l/min at 4–7 bar Lighting: Integrated LED or fluorescent lamp Viewing window: Safety glass with replaceable protective film Bsdpfxjv Syvqs Afhjlc Filtration: Integrated cartridge filter or external dust collector Abrasive return: Automatic, via cyclone separator Special features: Ergonomic glove ports Footswitch operation for safe working Compact design – ideal for workshops and laboratories Quiet operation thanks to sound insulation Easy to maintain and durable

Condition: good (used), Year of construction: 2006, CNC Multitron PS 10 Control: Column-guided Material roller conveyor on both sides 4000 mm / 1000 mm Cutting speed 15 - 105 m / min Technical details Cutting diameter 320 mm Saw blade length 3280 mm Bodpfov I Rfusx Afhjlc Cutting width 320 mm Total power requirement 3.8 kW Machine weight approx. 115

Condition: good (used), functionality: fully functional, A fuel transfer device is being offered for sale. Inspection possible by appointment. Bljdpfext H Iljx Afhjc Manufacturer: GL GmbH Metall- und Werkstattechnik − Model: 100/100 S − Serial number: 3448 − Year of manufacture: 08/2017 − Technical data: > Tank capacity: 100 litres > Delivery rate: 15 l/min > Weight: 92 kg > Fill level indicator: visual > Mobility: mobile > Switching suction/return filling: Single-lever operation/ball valve > Tank change: manual

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW Bsdpfx Afsxdu Tqeholc - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: good (used), Year of construction: 2009, Bürck + Lang underfloor saw with automatic feed, profile clamping device, lateral adjustment options for the cutting width, fully functional Blodpfx Aewb H T Tsfhjc

Condition: used, tank capacity: 1,174 l, GENERAL Equipment: Crane lugs Design: upright Remarks: Handhole diameter approx. 310 mm Internal diameter: 1,080 mm Total height: 2,200 mm Max. overpressure: 0.5 bar Base type: feet Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 1,174 liters Cylinder wall thickness: 4.1 mm Product contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 870 mm Last intended use: Chemicals TANK Number of feet: 4 pcs EQUIPMENT Manhole / Dome: Handhole Outlet: available Note: slight residues, metallic discoloration inside MATERIAL SPECIFICATION Flange material: steel Foot material: steel TECHNICAL DATA / DIMENSIONS Bedpfoxqdrijx Afholc Bottom wall thickness: 4 mm

Condition: used, tank capacity: 2,728 l, GENERAL INFORMATION Equipment: Crane lugs Design: Vertical Remarks: Note: Nameplate only available for one of the two tanks; further minor differences in construction between the two tanks (e.g., for the tank with the nameplate, the wall thickness of the bottoms is approx. 6.4 mm) Internal diameter: 1,400 mm Overall height: 2,950 mm Support type: Adjustable feet Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 2,728 liters Cylinder wall thickness: 5.2 mm Bodpsxqdqfefx Afholc Product-contacting material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 1,360 mm Last application: Chemical industry VESSEL Max. operating temperature vessel / °C: 100 °C Number of feet: 4 pcs EQUIPMENT Manhole / Dome: on the top head Outlet (alternative entry): 85 mm MATERIAL PROPERTIES Flange material: Steel Foot material: Steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.9 mm

Condition: reconditioned (used), Year of construction: 1996, Mubea / Muhr and Bender BS110: - mech. reinforcing steel shears - low-maintenance central oil lubrication - elect. Lifting magnet engagement via foot pedal - cuts reinforcing steel up to Ø 50 mm - workshop overhauled Special tools and devices on request. Trade-in of used machines. Bljdoqfgy Hspfx Afhjc Europe-wide delivery possible.

Year of construction: 1991, condition: reconditioned (used), Mubea / Muhr and Bender BB 032 P200: - rebar bending machine with electr. steering - Saving of bending programs with up to 10 different angle sizes - Memory for up to 200 bending programs Special tools and devices on request. Trade-in of used machines. Europe-wide delivery possible. Bledpfjium Eusx Afhsc

Condition: used, Used Chamber Filter Press / Filter Press Bledobr Db Ispfx Afhjc Rittershaus & Blecher R&B 800 x 800 Effective length: 3500 Number of chambers: 64 Filterpressure: 16 Bar Closed Pressure: min. 300 Bar, max. 320 Bar Filter surface per chamber: ca. 0,97 m² Filter surface: ca. 62 m² Volume of cake per chamber: ca. 11,19 Liter Volume of cake: ca. 716 Liter Plates: PP The machine is in good condition.

Condition: good (used), Table size: 710x450mm Bledpfxov S Ugds Afhjc Good condition!

Condition: good (used), Year of construction: 2021, functionality: fully functional, With the stretchMASTER 6000, you can straighten steel bars up to 6 meters in length. The processable cross-sections are: round steel 6 – 30 mm, flat steel 4 – 12 mm as well as 12 – 60 mm, and square steel 8 – 25 mm. The machine can be inspected by appointment. Bjdexyxkropfx Afhjlc Delivery is available at an additional charge.

Condition: used, Year of construction: 1986, Additional title: 3 coolable tanks Capacity: 205 hl Operating pressure: 0,3 bar Width: approx. 2,80 m Height: approx. 4,20 m Position: Vertical Bedexbql Djpfx Afholc Base construction: on feet Features: manhole; cooling jackets; spunging apparatus; sampling valve

Condition: used, Year of construction: 1997, vertical stainless steel tank with dished bottoms, shell cooling zone, manhole, sampling tap, central outlet. Additional title: pressure tank Volume: 152 hl Operating pressure: 5 bar Operating temperature: 20 °C Width: approx. 2600 mm Height: approx. 4000 mm Bjdpfxexbqlqo Afholc Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: cooling coil (jacket, 5.1 m², 1 bar, 84 l, glycol), manhole, spout DN65 with hand flap valve, vacuum valve DN32, safety valve DN25, bung glass, sample pipe DN10, CIP pipe DN40 with spray head DN25, level indicator by hose, yeast plug, pressure gauges, crane eyelets, ladder bar

Condition: used, Year of construction: 1982, Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole. Additional title: coolable tank Bsdpfxexbqkme Afhelc Volume: 21797 l Operating pressure: 0 bar Width: 2,95 m Height: 4,1 m Weight: 2000 kg Material: stainless steel, uninsulated Position: vertical Features: flat conical bottom, side wall and cone cooling zone, central outlet, manhole, DN50

Condition: used, Year of construction: 1998, Fermentation tank on feet, uninsulated, with flat conical bottom, side wall and cone cooling zone, central outlet and manhole. Additional title: coolable tank Volume: 21798 l Working pressure: 0 bar Bsdpfx Ajxbpq Sjfhelc Width: 2,95 m Height: 4,2 m Weight: 1500 kg Material: stainless steel Position: vertical Features: flat conical bottom, side wall and cone cooling zone, central outlet DN50, manhole

Condition: used, Year of construction: 2010, PARAMIX unit for carbonated drinks. The included process steps are: Deaeration of water, dosing and mixing of water and syrup, carbonating of water-syrup blend. Retrofit 2009 by FAMIX: - Carbonating device - CO2 pressure-temperature ratio controller Type BMS7 The controller including control cabinet is to be completely renewed when the machine is purchased. Additional title: mixing unit 1983 - 2010 Capacity approx.: 150 hl/h Mixing and carbonating Blsdpfjxbn Hrox Afhec Length: 2,9 m Width: 2,5 m Height: 2,5 m Weight: 3000 kg Operation / Control: mixing unit semi automatic, carbonating unit automatic Siemens S7 Material: Stainless steel Position: Frame mounted Features: 2 pressure vessels (Product und Vacum), each 8,3 hl/ 8 bar, CO2-Pressure-Temperature regulator (FAMIX BMS7), Carbonising unit (FAMIX) Capacity 13000 l/h, PT 100, Pressure sensor, Pressure relief valve, CIP connection, control cabinet, HMI (Siemens), 2 mixing vessels with flap and agitator (Ahlborn, approx. 15 hl per vessel)

Year of construction: 1990, condition: used, CIP plant for Seitz combifilter Year of construction: 1990 The manual system consists of caustic tank, heat exchanger and circulation pump. Additional title: one tank, heated CIP-Tank: 1500 l Bledpfow Uc Hbox Afhec