Used Kotz Und Soehne for sale (5,405)

Year of construction: 1990, condition: used, CIP plant for Seitz combifilter Year of construction: 1990 The manual system consists of caustic tank, heat exchanger and circulation pump. Bcsdpfow Uc Hbox Afhou Additional title: one tank, heated CIP-Tank: 1500 l

Condition: good (used), Approx. 221 Corlettes / Multi-Boxes, width 2m / 2.50m / 2.70m, partly stackable - used - : Prices (net) per unit ex location: €149 Price (net) Type 3 – stackable: €169 per unit, ex location! Manufacturer: Cordes und Koch Type: Corlette / Multi Box Dimensions (L × W × H in cm) Type 1 = 13 units (only sold as a complete lot) 250 x 115 x 180 Colour: blue Type 2 = 2 units 270 x 115 x 240 Colour: green Type 3 = 192 units, approx. 62 stackable Minimum purchase: 10 units 200 x 115 x 180 Colour: blue Type 4 = 14 units (only sold as a complete lot) Bcjdpsxc E Hljfx Afhju 270 x 115 x 188 Colour: green Condition: good Available: immediately Location: 63128 Dietzenbach

Year of construction: 1992, condition: used, Additional title: 6 coolable tanks Capacity: 164 hl Operating pressure: 0 bar Width: approx. 2.05 m Height: approx. 6,2 m Position: Vertical Base construction: On feet Bcodpfx Afew Tmqzjhou Features: Manhole, 2 cooling zones, sampling valve, security valve with pressure indicator, vacuum breaker

Condition: used, Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Bcjdou Tg Siopfx Afheu Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochures, etc.) is not held by the spikes and falls into a paper bunker or onto a discharge conveyor after the chute. The spiked cardboard boxes are knocked off the sorting roller by the knock-off shaft and then fall onto the cardboard removal belt or into a separate bunker. Throughput capacity: Depending on pre-sorting, the nature of the feed material and machine settings, between 10 and 12 tonnes per line, per hour can be processed. Scope of delivery: 2 pieces PaperSpike 2G incl. 2 geared motors 2 pieces accelerator belt incl. gear motor 2 pieces paper discharge belt incl. gear motor (The cardboard discharge belt is not for sale and is therefore not included in the delivery! There are two lines available for sale. Depending on the customer's request, either one unit or both units together are sold. The sales price always applies to one unit. Comments: The plants are expected to be dismantled by the end of October and will then be ready for loading. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Vise tilting and rotating jaw width 130 mm maximum opening width 100 mm Bcedpfxen Sliao Afheu rotation angle 360 degrees tilt plus 45 degrees minus 12 degrees jaw height 40 mm total height 175 mm Transport dimension : Length 410 mm width 155 mm Height 175 mm Weight 20,5 kg

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: TERMS AND CONDITIONS Training and Installation: 1 day €600 (incl. arrival and departure) Transport Costs: Bsdpfxow Ix Dps Afhscu Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: used, Additional title: in various designs Bcsdpfew Dy E Uex Afheu

Condition: used, Year of construction: 1992, Storage cellar consisting of 8 vertical tanks with temperature control. Additional title: coolable stainless steel tanks Features: 8 storage tanks (6x approx. 165 hl, 2 x approx. 175 hl), temperature control, paneel, blending apparatus Bcodpfjvcqthex Afhou

Year of construction: 1988, condition: used, Additional title: stainless steel tanks with temperature control Total capacity (gross): 904 hl Material: stainless steel Bcjdpsvcqg Iefx Afhju Features: 3 fermenting tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl) , own temperature control (Nerb)

Condition: used, Year of construction: 1986, Fermentation cellar with 4 coolable stainless steel tanks. Tank 1-3: C. Gresser, 1986, gross volume 204.60 hl. Tanks standing on 4 legs, each with 2 frame cooling zones, dished bottoms and central outlet. Equipment in each case: safety valve, cleaning line, CIP spray head, sampling tap, manhole in the frame and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 115.69 hl. Tank standing on 4 legs with frame cooling, dished bottom and outlet pipe. Equipment: Cleaning line, CIP spray head, sampling tap, manhole in the frame. Additional title: coolable stainless steel tanks 3 tanks each: 205 hl 1 tank each: 116 hl Bcjdpfx Afjvcq Dtsheu Material: stainless steel Position: vertical on 4 feet Features: Cooling jackets, cleaning lines, CIP spray heads, discharge lines, safety valves, sampling taps, manholes, sight glasses

Year of construction: 1991, condition: used, 6 horizontal stainless steel tanks with dished bottoms, side cooling zone, manhole, sampling tap and central outlet. The purchase of a partial quantity is possible. Additional title: stainless steel tanks with temperature control Total capacity: 2429 hl Max. pressure 4 Tanks: 0 bar Max. pressure 2 Tanks: 5 bar Material: stainless steel Bedpfxsvcqulo Afhecu Position: vertical Base construction: cylindrical tank with dished bottoms, placed on 4 square tube feet Features: 4 storage tanks (approx. 445 hl), 2 pressure tanks (approx. 320 hl), shell manhole, 1 shell cooling zone, insulated with steel metal cladding Periphery: own temperature control

Condition: used, Year of construction: 2016, operating hours: 15,000 h, functionality: fully functional, machine/vehicle number: kom 4892, Set of dryer equipment, including: Loading bunker Oversize vibrating screen Chain conveyor to dryer Belt dryer Chain conveyors from dryer Bjdpfsxa Drhjx Afhjcu Vibration separator

Condition: used, Year of construction: 1954, functionality: fully functional, machine/vehicle number: 541000, total height: 1,700 mm, total length: 1,200 mm, total width: 1,200 mm, overall weight: 815 kg, table length: 700 mm, table width: 70 mm, disc diameter: 150 mm, - Year of manufacture: 1954 - Fully functional, powered, ready for demonstration Bcsdpsxnimtofx Afhju - Grinding wheels Ø150 mm - Cross travel: 300 mm - Longitudinal travel: 450 mm - Table size: 700 x 70 mm / tiltable - Grinding spindle tiltable in Z, X, Y axes - Machine dimensions: 1700 x 1200 x 1200 mm - Weight: 815 kg - Factory No.: 541000 Accessories: - Swiveling dividing head - Swiveling vice - 2x dressing diamonds - Grinding wheel holders - Approx. 15 diamond/CBN grinding wheels - Various grinding wheels - Collets Ø1 – Ø20 mm

Year of construction: 2025, condition: new, Dosage ranges: 1 ml - 38 ml 2 ml – 100 ml 5 ml – 250 ml 20 ml – 680 ml 50 ml – 1,500 ml 1 filling station Plastic bottles or glass bottles “Anti-drop” device if possible Filling nozzles and pumps made of stainless steel AISI 316 Bottle feed via slat conveyor belt Adjustable guides Volumetric filling of products / bottles Bcodpjwprv Njfx Afhou Caps must be placed by hand Filling amount infinitely adjustable Very easy machine operation

Condition: used, The trustee will sell The AMI Förder – und Lagertechnik GmbH manual sorter consists of, among others, – Three packaging lines, each 30 m long, with roller racks arranged along both sides of each line – A system of pneumatic belt and roller feeders with scanners – Meler Micron 5 – devices with a piston pump for glue application – Multibox type PCX 1816 cardboard folding/packing machine, year of manufacture 2007, machine manufactured in France – 2 pieces – Logopak labeller model 510+ III TB (SN PE00026247), year of manufacture 2018 – APS 10D 10 bar screw compressor (2 pieces) – screw compressors manufactured in 2017 – APX 24 dryer – working pressure (bar) 13, year of manufacture 2009. – Tank Komnino pressure type KP-1000-11/0.8 – year of manufacture 2014, serial number 1569 – Bizerba – labelling system – Roller conveyor line Bjdpfx Afewaxw Ijhscu – line with roller conveyors with 7 storage fields for a maximum of 4 positions per field with an exit to 10 exit ramps The whole thing was dismantled by a professional company and put on pallets - ready for transport.

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, For sale is a drilling and milling machine from Alzmetall type Plus 3 DG The machine has been completely dismantled and overhauled. Inspection and test run possible at any time. Bcjdpfxoxn T S Ho Afhsu Forklift available for loading

Condition: used, A used well preserved universal drilling and milling machine Bohner and Koehle equipped with: - 3-axis digital display HEIDENHAIN Bedpfopai Dhex Afhocu - Swivel head 90° right/left - Large rotary table 800 x1200mm - central lubrication - documentation Table size 800x1200mm Table load 1000kg longitudinal movement X- axis 1000mm transversal movement Y- axis 800mm vertical movement Z- axis 800mm movement of rotary table 360 table feed longitudinal and transversal stepless 26 - 1100mm/min Rapid feed longitudinal and cross 1600mm/min feed vertical stepless 7 - 350mm/min rapid traverse vertical 500mm/min main drive: Milling spindle drive 2,5/ 3kW spindle admission SK40 12 speeds 45 - 2800rpm Dimensions and weight of the machine: Width 220cm depth 220cm height 250cm Weight of the machine 3.300 kg Tech. Data and dimensions: Errors excepted

Condition: used, Year of construction: 2018, operating hours: 22,700 h, functionality: limited functionality, We are selling a 15 kW ABB M3BP 160MLB 2 electric motor and a Danfoss VLT® HVAC Drive controller, also rated at 15 kW, as well as the Rittal control cabinet from a former extraction system we owned. Both units were operating flawlessly until disassembly. This sale is without warranty and returns are not accepted. Inspection and shipping from the factory are possible. Bcjdpfxov U Ntko Afhsu

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Bsdpfxsh Anyfo Afhecu

Condition: new, TECHNICAL DATA: - Base area: 4,000 x 5,000 mm [other configurations available] - Grid: 4,000 x 5,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Scope of delivery: - Columns/supports - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Base area: 20 m² | Dimensions: 4,000 x 5,000 mm | €2,091.60 net, plus transport costs and VAT Variant II: Base area: 40 m² | Dimensions: 4,000 x 10,000 mm | €3,754.80 net, plus transport costs and VAT Variant III: Base area: 40 m² | Dimensions: 8,000 x 5,000 mm | €3,591.00 net, plus transport costs and VAT Variant IV: Base area: 60 m² | Dimensions: 4,000 x 15,000 mm | €5,395.00 net, plus transport costs and VAT Variant V: Base area: 80 m² | Dimensions: 4,000 x 20,000 mm | €6,825.00 net, plus transport costs and VAT Variant VI: Base area: 80 m² | Dimensions: 8,000 x 10,000 mm | €6,462.50 net, plus transport costs and VAT Variant VII: Base area: 80 m² | Dimensions: 16,000 x 5,000 mm | €6,552.50 net, plus transport costs and VAT Variant VIII: Base area: 120 m² | Dimensions: 8,000 x 15,000 mm | €9,238.00 net, plus transport costs and VAT Variant IX: Base area: 120 m² | Dimensions: 10,000 x 12,000 mm | €8,785.40 net, plus transport costs and VAT Variant X: Base area: 160 m² | Dimensions: 8,000 x 20,000 mm | €12,211.52 net, plus transport costs and VAT Variant XI: Base area: 160 m² | Dimensions: 16,000 x 10,000 mm | €12,040.40 net, plus transport costs and VAT Variant XII: Base area: 240 m² | Dimensions: 16,000 x 15,000 mm | €17,580.72 net, plus transport costs and VAT Variant XIII: Base area: 320 m² | Dimensions: 16,000 x 20,000 mm | €23,076.40 net, plus transport costs and VAT Optional accessories: - Railing - Flush wall connection - Staircase Bcsdexmku Nepfx Afheu - Transfer station - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURE TO YOUR SPECIFICATIONS This platform system is an example from our standard range. Of course, we also design and manufacture your storage platform precisely to your operational requirements – tailored to area, load capacity, installation height, and intended use. TRANSPORT & INSTALLATION We are pleased to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available for an additional charge. Extra costs depend on the destination and scope of the shipment and can be individually requested from us. PAYMENT TERMS Payment terms are to be agreed upon in case of an order. The price is given per unit/net price or as described in the text (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US DLK in Nordhorn deals in new and used products in the areas of warehouse logistics, conveyor technology, warehouse platforms, textile storage, as well as machinery for trade, industry, and crafts. ✅ Four wins – the success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Footprint: 4,000 x 5,000 mm [other versions available] - Grid dimensions: 4,000 x 5,000 mm - Top edge of floor: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm P6 chipboard, untreated/white - Load capacity: 250 kg - Colour: RAL of your choice - Condition: new Bcjdpfxjxmkuis Afhou Scope of delivery: - Columns - Primary and secondary beams - Bracing crosses - Floor panels - Fastening material PRICES: Variant I: Footprint: 20 m² | Area: 4,000 x 5,000 mm | €2,013.00 net, plus transport costs and VAT. Variant II: Footprint: 40 m² | Area: 4,000 x 10,000 mm | €3,531.90 net, plus transport costs and VAT. Variant III: Footprint: 40 m² | Area: 8,000 x 5,000 mm | €3,448.94 net, plus transport costs and VAT. Variant IV: Footprint: 60 m² | Area: 4,000 x 15,000 mm | €5,047.20 net, plus transport costs and VAT. Variant V: Footprint: 80 m² | Area: 4,000 x 20,000 mm | €6,588.00 net, plus transport costs and VAT. Variant VI: Footprint: 80 m² | Area: 8,000 x 10,000 mm | €6,092.40 net, plus transport costs and VAT. Variant VII: Footprint: 80 m² | Area: 16,000 x 5,000 mm | €6,234.00 net, plus transport costs and VAT. Variant VIII: Footprint: 120 m² | Area: 8,000 x 15,000 mm | €8,676.54 net, plus transport costs and VAT. Variant IX: Footprint: 120 m² | Area: 10,000 x 12,000 mm | €8,092.44 net, plus transport costs and VAT. Variant X: Footprint: 160 m² | Area: 8,000 x 20,000 mm | €11,509.72 net, plus transport costs and VAT. Variant XI: Footprint: 160 m² | Area: 16,000 x 10,000 mm | €11,349.24 net, plus transport costs and VAT. Variant XII: Footprint: 240 m² | Area: 16,000 x 15,000 mm | €16,426.80 net, plus transport costs and VAT. Variant XIII: Footprint: 320 m² | Area: 16,000 x 20,000 mm | €21,339.63 net, plus transport costs and VAT. Further versions available. Optional accessories: - Safety railings - Flush wall connection - Staircase - Transfer platform - Collision protection ⚙️ CUSTOM DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we design and manufacture your storage platform precisely according to your operational requirements – tailored to area, load capacity, construction height and intended area of use. TRANSPORT & ASSEMBLY We would be glad to assist you with the transport and assembly of the goods. This item is available for collection. Delivery or shipment can be arranged at an additional cost. These costs depend on the delivery location and shipment volume and can be individually requested from us. PAYMENT TERMS Payment terms will be coordinated upon order placement. Price refers to unit price/net price, or as stated in the description (plus VAT). You will, of course, receive an invoice with VAT shown. ✅ Four winning factors – The success components of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Footprint: 5,000 x 6,000 mm [other variants available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: Chipboard 38 mm, grade P6, raw/white - Load capacity: 350 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights are available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Floor covering - Fastening material PRICES: Variant I: Floor area: 30 m² | Dimensions: 5,000 x 6,000 mm | €3,598.65 net, plus transport costs and VAT. Variant II: Floor area: 60 m² | Dimensions: 5,000 x 12,000 mm | €6,418.50 net, plus transport costs and VAT. Variant III: Floor area: 60 m² | Dimensions: 10,000 x 6,000 mm | €6,423.45 net, plus transport costs and VAT. Variant IV: Floor area: 90 m² | Dimensions: 5,000 x 18,000 mm | €9,104.40 net, plus transport costs and VAT. Variant V: Floor area: 120 m² | Dimensions: 5,000 x 24,000 mm | €11,890.80 net, plus transport costs and VAT. Variant VI: Floor area: 180 m² | Dimensions: 10,000 x 18,000 mm | €16,281.60 net, plus transport costs and VAT. Variant VII: Floor area: 240 m² | Dimensions: 10,000 x 24,000 mm | €21,471.36 net, plus transport costs and VAT. Further variants available Optional accessories: - Guard rails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PARTNERS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your storage platform precisely according to your operational requirements – tailored to surface area, load-bearing capacity, installation height and the intended application. Our planning department will prepare an individual, non-binding quotation based on your specifications. Whether new construction, extension or modernization of existing systems – we support you with sound expertise and practical solutions. Bjdpfx Afjxmklbohscu TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or dispatch can be arranged at an additional cost. Extra charges depend on the place of delivery and the scope of the shipment and can be quoted individually upon request. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The price is quoted per unit/net, or as stated in the description (plus VAT). Naturally, you will receive an invoice showing the applicable VAT. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, materials handling systems, storage platforms, textile storage, as well as machinery for trade, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four to win – The DLK formula for success – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 6,000 mm [other configurations available] - Grid: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Floor covering: 38 mm chipboard P6 raw/white - Load capacity: 250 kg - Color: RAL color of your choice - Condition: new The mezzanine platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Cross bracing - Floor covering - Fastening materials PRICES: Version I: Base area: 30 m² | Area: 5,000 x 6,000 mm | €3,400.00 net, plus shipping costs and VAT. Version II: Base area: 60 m² | Area: 5,000 x 12,000 mm | €6,008.00 net, plus shipping costs and VAT. Version III: Base area: 60 m² | Area: 10,000 x 6,000 mm | €6,043.20 net, plus shipping costs and VAT. Version IV: Base area: 90 m² | Area: 5,000 x 18,000 mm | €8,512.54 net, plus shipping costs and VAT. Bjdpfx Afsxmkk Rohjcu Version V: Base area: 120 m² | Area: 5,000 x 24,000 mm | €11,154.85 net, plus shipping costs and VAT. Version VI: Base area: 180 m² | Area: 10,000 x 18,000 mm | €15,343.02 net, plus shipping costs and VAT. Version VII: Base area: 240 m² | Area: 10,000 x 24,000 mm | €20,081.60 net, plus shipping costs and VAT. Further configurations available Optional accessories: - Guardrail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This mezzanine system is an example from our standard range. Of course, we also design and manufacture your storage platform precisely to your operational requirements—tailored to the area, load capacity, overall height, and intended application. Based on your specifications, our planning department will prepare a customized, non-binding offer. Whether new construction, extension, or modernization of existing systems—we support you with extensive expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of your goods. This item is available for collection. Delivery or shipping is possible at additional cost. Extra charges depend on the delivery location and the size of the shipment and can be requested from us individually. PAYMENT TERMS Payment terms to be arranged in case of order. The price is per unit/net price as stated in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US The company DLK in Nordhorn trades in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and crafts. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please contact us if you have any questions. ✅ Four times the success – The cornerstones of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base area: 5,000 x 5,000 mm [other variants available] - Grid: 5,000 x 5,000 mm - Top edge of flooring: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm particleboard P6 raw/white - Load capacity: 500 kg - Colour: RAL of your choice - Condition: new The platforms can be extended in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Supports - Main and secondary beams - Bracing crosses - Flooring - Fastening material Bsdpfx Aoxmkkdefhecu PRICES: Variant I: Base area: 25 m² | Area: 5,000 x 5,000 mm | €3,031.80 net, plus transport costs and VAT. Variant II: Base area: 50 m² | Area: 5,000 x 10,000 mm | €5,376.95 net, plus transport costs and VAT. Variant III: Base area: 75 m² | Area: 5,000 x 15,000 mm | €7,509.23 net, plus transport costs and VAT. Variant IV: Base area: 100 m² | Area: 5,000 x 20,000 mm | €9,780.27 net, plus transport costs and VAT. Variant V: Base area: 100 m² | Area: 10,000 x 10,000 mm | €9,485.32 net, plus transport costs and VAT. Variant VI: Base area: 150 m² | Area: 10,000 x 15,000 mm | €13,729.96 net, plus transport costs and VAT. Variant VII: Base area: 200 m² | Area: 10,000 x 20,000 mm | €17,669.70 net, plus transport costs and VAT. Variant VIII: Base area: 300 m² | Area: 20,000 x 15,000 mm | €25,669.35 net, plus transport costs and VAT. Further variants available Optional accessories: - Guard rail - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS WITH US: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOMIZED DESIGN & MANUFACTURING This platform system is an example from our standard product range. Of course, we develop and manufacture your storage platform precisely according to your operational requirements — tailored to floor area, load-bearing capacity, installation height, and intended application. Our planning department will prepare an individual, non-binding offer based on your specifications. Whether you are constructing new facilities, expanding, or modernising existing installations – we support you with extensive technical expertise and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping is possible at extra cost. The additional fees depend on the delivery location and the scope of shipment and can be requested individually from us. TERMS OF PAYMENT Payment terms to be agreed upon in case of order. The price is understood as unit price/net price or as specified in the description (plus VAT). You will of course receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please do not hesitate to contact us. ✅ Four to win – The key pillars of DLK – Warehousing Technology | Levelmaker® | Logistics | Solutions

Condition: new, TECHNICAL DATA: - Base dimensions: 5,000 x 5,000 mm [other versions available] - Grid: 5,000 x 5,000 mm - Top edge of floor surface: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm raw/white chipboard (P6 grade) - Load capacity: 350 kg - Colour: RAL colour of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights available on request. Our team will be happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing crosses - Flooring - Mounting materials PRICES: Version I: Base area: 25 m² | Dimensions: 5,000 x 5,000 mm | €2,863.50 net, plus shipping and VAT. Version II: Base area: 50 m² | Dimensions: 5,000 x 10,000 mm | €5,040.00 net, plus shipping and VAT. Version III: Base area: 75 m² | Dimensions: 5,000 x 15,000 mm | €7,033.95 net, plus shipping and VAT. Version IV: Base area: 100 m² | Dimensions: 5,000 x 20,000 mm | €9,206.61 net, plus shipping and VAT. Version V: Base area: 100 m² | Dimensions: 10,000 x 20,000 mm | €8,916.48 net, plus shipping and VAT. Version VI: Base area: 150 m² | Dimensions: 5,000 x 5,000 mm | €13,075.20 net, plus shipping and VAT. Version VII: Base area: 200 m² | Dimensions: 10,000 x 20,000 mm | €16,519.56 net, plus shipping and VAT. Version VIII: Base area: 300 m² | Dimensions: 5,000 x 5,000 mm | €24,309.81 net, plus shipping and VAT. Additional versions available Optional accessories - Guard rails - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACTS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipping is available at an additional cost. The extra charges will depend on the delivery location and scope of the shipment and can be provided by us upon request. PAYMENT TERMS Payment terms are agreed upon in the event of an order. All prices are per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals with new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for commerce, industry and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive terms. Please contact us with any questions. Bsdpfx Afexmkdkehecu Four wins – The cornerstones of DLK’s success – Warehouse Technology | Levelmaker® | Logistics | Solutions.