Used Manual Press for sale (25,861)

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm Bdjdpfx Agezl E Saokji ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: good (used), functionality: fully functional, Year of construction: 2003, Press force: 135 t Bending length: 4100 mm Frame width: 3600 mm Control system: DELEM Rapid traverse speed: 100 mm/sec Bending speed: 10 mm/sec Total power requirement: 15 kW Machine weight (approx.): 11,700 kg Bdjdpszg A D Nofx Agkji

Condition: like new (used), functionality: fully functional, working width 3000 mm working height 2500 mm year of manufacture 1995 engine power 7 kW weight 2500 kg power supply 380 V side cylinders and gearboxes adjustable from the control panel safety switch – shear pin Bjdpfx Agjzn Iqwsksdi CE marking

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm Bdedpfx Aoiidm Negkoi The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Catalog number: 7732 TECHNICAL DATA - Pressing force: hydraulic - Briquette shape: round - Briquette diameter: 70 mm - Hopper diameter: 1200 mm - Capacity: approximately 70 kg/h - Automatic machine operation - Motor: 7.5 kW - Max. operating pressure: 150 bar - Dust extraction outlet: 90 mm - Diameter of the filter bag opening: 500 mm - Max. bag height: 900 mm - Dimensions (L/W/H): 1950x1400x2700 mm - Weight: 1130 kg ADVANTAGES – Made in Italy – Option for direct connection of a sawdust extraction system – Used briquetting machine – DTR documentation available Bedpfx Agjzw Dbkjkodi – Very good condition Net price: 29900 PLN Net price: 6953 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm Bodpfx Aezryy Eogkodi - Press cylinders: 6

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW Bjdoztvwispfx Agksdi - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² - Air flow rate: ~ 3,200 m³/h

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm Bdedpfozrpn Sex Agkji ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min Bedpfx Aszrpqmsgkjdi throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm Bsdpfx Agszrptnjkjdi stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Die cushion stroke in table 395 mm Bdjdpfxjzrpt Ie Agkei Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: used, total length: 3,720 mm, total width: 2,300 mm, total height: 2,750 mm, Year of manufacture: 2021 Colour: White Weight: 7.700 kg Price: On request - Year: 2021 - Documentation available: Yes - CE marking present: Yes - Serial number: 2102061 - Drive system: CNC - Control system brand: Cybelec - Control system type: Cybtouch-8W - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 135 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 Bedozrgncepfx Agkjdi - Max. stroke [mm]: 210 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3720mm x 2300mm x 2750mm (l x w x h) - Transport weight [kg]: 7700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, functionality: fully functional, Year of construction: 2026, controller model: Estun E21, stroke length: 150 mm, throat depth: 320 mm, overall weight: 9,800 kg, total length: 3,200 mm, total width: 1,850 mm, total height: 2,690 mm, input voltage: 400 V, pressing force: 125 t, table length: 32,000 mm, table width: 2,650 mm, type of input current: three-phase, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, The Digima PBH-125X3200 hydraulic press brake is a professional machine designed for precise sheet-metal bending in manufacturing plants, metalworking workshops and companies specialising in metal fabrication. Its robust construction, high pressing force and large working area make it suitable for both individual projects and repetitive production batches. The machine provides a maximum pressing force of 125 tonnes and a working length of 3,200 mm. This makes it possible to bend long sheet-metal components and perform demanding production operations. The distance between the columns is 2,650 mm, the throat depth is 320 mm, the maximum opening is 415 mm, and the ram stroke is 150 mm. These parameters provide sufficient working space for components of various sizes and shapes. Bdedjzlpanspfx Agkoi The press brake is equipped with an Estun E21 controller, which allows the operator to program bending parameters and accurately control the position of the back gauge. The system can store up to 40 machining programs, each containing a maximum of 25 working steps. Automatic reference-point searching, rapid position indexing and parameter backup functions reduce machine setup time and improve the repeatability of finished components. The hydraulically driven bending beam ensures smooth and stable movement as well as consistent application of the pressing force. The machine is powered by a 7.5 kW motor. Precision ball screws and linear guides minimise mechanical play and support accurate component positioning. A Rexroth hydraulic valve system provides reliable oil-flow control, while electrical components from Schneider Electric and Lintech increase the safety and durability of the electrical installation. The AMADA quick-clamping system enables fast tool changes and reduces preparation time between different bending operations. The standard tooling includes a multi-V die suitable for bending sheets of different thicknesses and angles, as well as a four-piece punch set made from durable tool steel. The machine is also equipped with four adjustable back-gauge fingers, which help the operator position the material accurately before bending. Side and rear safety guards equipped with limit switches protect the operator from entering the working area while the machine is in operation. Opening a guard causes the machine to stop immediately, improving safety during everyday use. The Digima PBH-125X3200 is a solid and versatile press brake for companies requiring high bending accuracy, repeatability and production efficiency. Its high pressing force, 3,200 mm working length, functional control system and industrial-quality components make it a reliable solution for intensive use in a professional sheet-metal processing facility.

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t Bdjdpfx Aji Amnpsgkei Maximum load on prism jaw 7.5t Piston stroke 160mm Piston travel 550mm Dimensions and weights Length (product) approx. 1240mm Width/Depth (product) approx. 650mm Height (product) approx. 1920mm Weight (net) approx. 280kg Clear opening 790mm Maximum installation height 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot levers Winch for raising and lowering the table Location: Ex works - available for immediate delivery -

Condition: new, Year of construction: 2026, HSBM 2020-20 SB – Manual Swivel Bending Machine HSBM SB – Manual swivel bending machine in a heavy-duty design with segmented upper tools Easy to operate Segmented upper tools Swivel bending function with secure clamping of the workpiece through pre-tensioning of the upper die Heavy, compact welded construction For simple bending with precise adjustment of the bending angle using a stop with a scale Particularly low maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note regarding technical data: Sheet thickness max.: Performance data refer to material with a tensile strength of 400N/mm²; Bending capacity stainless steel: Factor 0.75; Bending capacity aluminum: Factor 1.2; Hardened upper tools are required for bending stainless steel. Model: HSBM 2020-20 SB Article no.: 3772920 Technical data Working width max.: 2,020 mm Bending capacity max. steel 400 N/qmm: 2 mm Bending capacity max. steel 400 N/qmm without die extension: Bending capacity max. steel 400 N/qmm with die extension: Bending capacity max. stainless steel: 1.5 mm Bending capacity max. aluminum: 2.4 mm Bending angle max.: 135° Segment division Bedpfxecnxc Ns Agkedi Clearance between upper and lower die max.: 120 mm Length: 2500 mm Width: 710 mm Height: 1500 mm Weight: 1,020 kg Location: Ex works - free loading -

Condition: as good as new (ex-display), Year of construction: 2026, Technical specifications: Laminated panel press from our showroom; Bedpfxsb Eln Ds Agkodi Working area: width from 150 - 2,550 mm, height from 150 - 1,400 mm, depth from 150 - 700 mm; Variable pressure adjustment 300/700/1100/1400/1800/2200 dN (kg) of the side pressing beam; Variable pressure adjustment 500/800/1200/1500/1900/2200 dN (kg) of the top pressing beam. Simple operation via 6 separate push buttons, freely adjustable pre-selection of pressing time with automatic opening function, loading height 300 mm. The machine is in our showroom and can be delivered immediately. Location: available from our warehouse in 54634 Bitburg.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Bjdpjh D If Hjfx Agksdi Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm Bdsdpfxsh Dy Rfe Agkei weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: new, 1 brand-new hydraulic press brake with 2-axis NC positioning control, make ELGO P 40 Make: LAMI NOVA, Origin China Model: P 2600 Exclusive representation! Technical data: Pressure capacity 100 t Folding length 2600 mm Bedpor Hby Hsfx Agksdi Clearance between the uprights 2050 mm Projection 320 mm Installation height 405 mm Stroke 140 mm Feed speed 60 mm/s Working speed 7.5 mm/s Retraction speed 55 mm/s Drive power 7.5 kW Dimensions L x W x H 3050 x 1650 x 2520 mm Weight 6200 kg Accessories / special features: - 2-axis NC positioning control, make ELGO P 40 for motorized plunge depth and backgauge plunging depth and the back gauge - PM 1 upper tool, consisting of 3 x 835 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 60 x 60 mm with several V-openings - Back gauge with ball screws, length approx. 600 mm - Front support arms - Foot pedal with EMERGENCY STOP - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Hydraulics BOSCH, DUPLOMATIK, REXROTH or OILCONTROL - Electrical system SCHNEIDER - Operating instructions - CE-compliant Delivery time: approx. 8-10 weeks, after receipt of order Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: new, Year of construction: 2025, MANUAL FINGER-JOINTING LINE mod. FJ-2000 Semiautomatic finger-jointing line, including:  Bjdpedtyp Rofx Agksdi Milling unit with hydro-pneumatic feed mod. IFJ 2008 Manual gluing unit mod FG 2002 Hydraulic press with pneumatic crosscut saw mod. PFJ-2041-SA   The trimming, milling, gluing pressing and crosscutting of the workpieces is performed by 1 or 2operators during a semi-automatic working cycle. Production capacity: up to 2 / 3 m³/8hrs Finger jont line composed with brand new machines

Year of construction: 2026, condition: as good as new (ex-display), Vacuum Membrane Press The VP series is the optimal solution for woodworking. The VP 3000 is equipped with heating technology, which shortens the drying time of the adhesive, thereby increasing performance. Possible applications: Veneering / Form gluing / Coating... Bdodpfx Aedwh E Aogkei Coating of various profiles (veneer, paper, plastic...) Wood bending: Production of bent and laminated components The heating system is equipped with temperature control. Rubber membrane 2.5 mm Table top is made of plastic, 12 mm Oil-free Becker vacuum pump, 25 m3/h The control system for the vacuum / tank capacity is 15 l Working area: 3000x1500mm Heating system temperature: Max. 60 degrees C Heating system: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m3/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a chassis. Location: Available ex-stock in 54634 Bitburg - free loading -

Condition: as good as new (ex-display), Year of construction: 2024, New hydraulic heating plate press Manufacturer: ITALPRESSE, Type XL/6 30-13 with gold-anodized plates Touch display control Bsdpfx Ajdx R Tfsgksdi - Electric heating plates, 3,000 x 1,300 mm - Total pressure: 90 tons - Number of heating plates: 2 pcs. - Number of tiers: 1 pc. - Cylinder stroke: 350 mm - Tier opening: 350 mm - All-side loading - Number of pressure cylinders: 6 pcs. - Diameter of pressure cylinders: 85 mm - Power requirement of hydraulic unit: 3 kW - Electric heating plates made of solid, hard aluminum with built-in heating wires - Heating power: 22 kW - High-pressure insulation plates - Working temperature: 90° C - Max. temperature: 120° C - Operating voltage: 400 V/50 Hz - Safety regulations according to CE standard Standard equipment: - Movement of the press table with rack and pinion and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for controlling and monitoring the machine - Digital timer for setting the pressing time and automatic opening - Digital input and monitoring of the pressing pressure - Digital timer for setting the pressing time - Digital diagnostics and display of error messages - Safety circuit with two-hand operation - Safety pull cord - Safety bracket for the lower press table Integrated accessories: - Touch screen TS/400 - EFC Electronic flatness control - Gold-anodized heating plates (bus bars) Location: In stock at 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, input voltage: 200 V, pressing force: 80 t, stroke length: 100 mm, table width: 1,000 mm, table length: 600 mm, overall weight: 8,160 kg, year of last overhaul: 2021, Amada TP 80C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 Bdodpfeu E U Nijx Agkei pressing force 80t stroke length: 100mm number of strokes: 60-100/min table-bear distance: 310mm stroke adjustability: 80mm table size: 1000x600mm bear size: 590x450mm sudden stop time: 195 ms maximum downtime 215ms machine weight: 8160 kg

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 60 t, table width: 900 mm, table length: 550 mm, overall weight: 6,150 kg, year of last overhaul: 2021, compressed air connection: 5 bar, ram adjustment: 90 mm, warranty duration: 5 months, Equipment: documentation/manual, Amada TP 60C-X2 Eccentric press with air clutch for sale in new condition Year of manufacture: 1983 pressing force 60t two-handed operation central fattening Bdjdpou Haqhefx Agkoi stroke length: 90mm number of strokes: 65-100/min table-bear distance: 275mm stroke adjustability: 80mm table size: 900x550mm bear size: 500x400mm total response time: 175ms voltage: 200v 50Hz 5.5kw machine weight: 6350 kg

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir Bjdpfxsw Sgnkj Agkjdi - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice