Used Mechanical Press for sale (17,962)

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Nedpfxozt H U Ss Ahnjlf Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Nledpfxecmat Uj Ahnsf the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: used, Year of construction: 1987, machine/vehicle number: 87 / 906, pressure:63 t stroke:8 - 80 mm no. of strokes:60 - 300 Hub/min distance between columns:720 mm table surface area:710 x 700 mm hole in the table:345 x 100 mm column travel -side:320 x 200 mm ram surface:500 x 400 mm ram adjustment:80 mm throat:350 mm dayligth:250 / 275 mm Nljdpfxjcxxpce Ahnof feed length:220 mm table above floor:1000 mm total power requirement:9,2 kW weight of the machine ca.:6,5 t

Condition: ready for operation (used), Year of construction: 2016, pressure 20.0 t chamfer lenght 850 mm distance between columns 850 mm back stop - adjustable 375 + 400 mm stroke of upper beam 196 mm dayligth 470 mm ajustment speed 200 mm/sec table height ca. 900 mm total power requirement 5.0 kW weight of the machine ca. 2500 kg New price ~ 85.000 euros well-kept / very good condition (!!) with electromechanical direct drive (servo motor + ball screws) Machine is operated without hydraulic oil - in checked condition - machine video - ?v=foxzKIA7vX8 Description : High performance, fast travel speeds and the best ergonomics this bending machine to a perfect tool in terms of productivity and Accuracy. This allows an unrivaled high productivity in the field of small and middle bending parts can be achieved, since even complicated bending sequences several stations can be processed very quickly. A large number of different and universally divided tools are possible an almost unlimited variety of areas of application. Furnishing : - Stable machine frame for standing and seated operation - Deformation-optimized press beam - Highly dynamic, electromechanical. Direct drive (servo motor + ball screws) - CNC control Panasonic Toughbook incl. USB and WIFI connection - CNC controlled axes : Y + X + R + Z1 + Z2 - CNC control unit in front right, swivelling - Inductive length measuring system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - front safety device (DUAL Laser/Iris Rapid Bend) Nlodpsxacifefx Ahnjf - Rear security cover - Laterally pivoting protective doors - 2x foot switch, for standing and sitting operation - Support tables comfort (front) - User manual (original) * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * Speed X axis .. 250 mm/sec * Speed R axis .. 600 mm/sec * Z axis speed .. 1100 mm/sec * Positioning accuracy X axis .. 0.04 mm * Positioning accuracy R axis .. 0.06 mm * Travel X axis .. 375 + 400 mm * Travel R axis .. 180.0 mm

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0540/98, functionality: fully functional, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. The table measures 1600 x 1300 mm Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Nlodpfx Ahjicbbzsnof Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers Nljdewup Efjpfx Ahnsf -Manufacturer: Klauke, hand crimping pliers type K05 -Crimping: of cable lugs and cable connectors -Standard version: 6 - 50 mm -Dimensions: 390/140/H50 mm -Weight: 1.1 kg

Condition: used, Year of construction: 2010, functionality: limited functionality, pressing force: 110 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale length: 1,200 mm, bale height: 800 mm, bale weight: 500 kg, type of input current: three-phase, input voltage: 400 V, input current: 161 A, overall weight: 36,000 kg, oil tank capacity: 1,500 l, power: 90 kW (122.37 HP), input frequency: 50 Hz, Equipment: documentation/manual, We are offering this used EUROPRESS channel baling press, model 8300 V 5 K, manufactured in 2010. Type: Channel baling press 8300 V 5 K Factory number: 10060294 Drawing number: 2300000 Year of manufacture: 2010 Weight: approx. 36,000 kg Rated voltage: 3 x 400 V / 50 Hz Drive power: 90 kW Nsdpfxszwpdws Ahnslf Rated current: approx. 161 A If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t Nljdpfx Ahszrpt Uonef dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: new, MECHANICAL SCREW PRESS FOR STACKING U-JOINTS PRK-2 Designed for staking u-joints as well as assembly and dissasembly of driveshafts during repair and remanufacturing process Press can be used for the assembly and replacement of cardan joints in the repair and production of cardan shafts, as well as for other processes in which the pressing operation is used. This press is designed for use in a repair shop and does not require any special knowledge for operation and maintenance. Manual feed ensures precision and quality of stacking process. The pressing mechanism is based on a ball screw, which has a high efficiency and a long service life. Nodpjpbwdljfx Ahnslf Technological tooling for replacing stacked u-joints: • Centering housing for the punches. • Set of 8 bits for punching crosses with diameters from 20 to 31 mm for drive shafts. • Set of 4 bits for punching crosses with diameters from 15 to 19 mm for steering shafts. SPECIFICATIONS Working area (L x B x H) 322х312х350 mm Maximum compression force 5500 kg Maximum force on rupture 2000 kg Dimensions (length x width x height) 402х488х1478 mm Weight 160 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: used, Mechanical High-Pressure Machine Vice GRESSEL Type MHS 126-3 High-pressure clamping device Jaw width: 125 mm Jaw height: 40 mm Opening width: 221 mm Clamping force: 2 / 3 / 4 tons Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vice with mechanical power amplifier - Clamping range adjustable in 2 stages Nsdpfx Ahjxlkvdenjlf - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 26 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: HB10011N2025006, The machine has not been used yet! MACHINE DETAILS Control: Teach-in Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,400 mm Unladen weight: 800 kg Transport packages: 1 piece EQUIPMENT Documentation CE marking Njdpfszuw D Tex Ahnolf CE certificate

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm Nodpfx Ahoy Ra Ddjnelf - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Nledjh Rkhnspfx Ahnof Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: good (used), functionality: fully functional, Very robust and heavy-duty mechanical knee-lever press made of cast iron. Converted to electric heating, 230V/50Hz. Nsdpfx Ahjzuwv Nenslf Approx. 850 kg. Pressing area: 40x45 cm.

Condition: good (used), Proofing press 55x65cm Antique Nljdpfx Ahsztn Slenjf The machine is in very good condition, can be used as an exhibit or as a printing machine. Max. format 550×650 mm Weight 650 kg Flow table, system of claws holding the sheet. Electrically driven spreading roller.

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Nljdpfxjykl Ias Ahnef Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. Nodpfx Ahodzqn Uenjlf 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Total weight: approx. 40 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, For sale is a complete, modern production line for manufacturing and processing electric motor stators, produced by the reputable NIDE Group (year of manufacture: January 2017). The machines are fully automated (CNC/PLC control) and formed a cohesive production flow within the facility. The equipment has CE certification. The complete line consists of 5 processing stations: Coil Winding Machine: Model RXL2-160. Winding Inserting Machine: Model QX1-150/160. Middle Forming Machine: Model Z2XJ1-160/190. Nlodpfxjzuukqs Ahnjf Double Side Lacing Machine: Model BXIIL1-160/160 (with a rotary table integrated into the process). Final Forming Machine: Model Z3XJ1-200/210T (with its own hydraulic power unit). Along with a comprehensive set of tooling! We also sell the original toolboxes containing mandrels, forming heads, and dies, which enable quick changeovers for production (as seen in the photos). The line is ready for loading from the warehouse in Ostrzeszów. Please contact us.

Condition: used, HYDRAULIC PRESS SMG PRESSURE 300t LENGHT OF STROKE 700mm POWER 30kw UP TABLE DIMENSIONS 1500(1600)x1300mm DOWN TABLE DIMENSIONS 1500(1600)x1300mm CUSHION 100t Nljdpfjtndu Ujx Ahnof CUSHION LENGTH OF STROKE 280mm WEIGHT 28.000kgr FULL RECONDITION LIKE NEW CHANGE EVERYTHING (SEALS PUMPS etc)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 170 t Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 445 mm Njdpfx Ajzt R Eujhnjlf Accessories: - 2 front support arms - Light curtain in front of the machine - Foot switch - Wila quick-release system at the top and bottom - TASC 6000 control system - Die shifting mechanism - Including tools - Crowning - 6-axis back gauge

Condition: used, Year of construction: 2025, total length: 1,200 mm, total width: 800 mm, total height: 1,800 mm, Colour: Blue Empty weight: 450 kg Price: On request - Year: 2025 Nodpfx Asztxn Rehnslf - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: PB12093N2025005 - Operating hours: 0 - Drive system: Conventional - Vertical/Horizontal: Horizontal and vertical - Number of rolls [pcs.]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Top roll diameter [mm]: 155 - Bottom roll diameter [mm]: 155 - Bending speed [mm/min]: 11 - Capacity diameter round [mm]: 50 - Options: Digital readout - Transport dimensions: 1200mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Made in Germany. Nedpfxezt H Uxe Ahnelf

Condition: new, Year of construction: 2026, power: 15 kW (20.39 HP), pressing force: 150 t, stroke length: 125 mm, table width: 660 mm, table length: 920 mm, throat depth: 320 mm, ram plate width: 290 mm, ram plate length: 600 mm, total length: 1,600 mm, total width: 2,280 mm, total height: 2,750 mm, overall weight: 7,100 kg, Equipment: CE marking, documentation/manual, safety light barrier, CRONOSSTECH CECP 150 | 150 Ton C-Type Eccentric Press | Heavy Industry Sheet Metal Cutting and Forming Machine From CRONOSSTECH, Turkey's reliable press machine manufacturer: a 100% CE certified 150 Ton C-Type Eccentric Press for cutting, punching, and heavy cold forming operations on thick sheets. With its reinforced, rigid steel frame, it offers industrial solutions with minimal deflection, maximum work safety, and flawless stroke accuracy in heavy-duty industrial production lines. Key Advantages for Your Industrial Production: High Durability and Repeatability: Perfect part quality and long die life thanks to its steel construction that remains stable during heavy-tonnage strokes. Maximum Work Safety: Operator safety-focused design with beam barrier, double-coil safety valve, and mechanical fuse. Low Maintenance Costs: Continuous and trouble-free operation thanks to the central, fully automatic grease lubrication system. Smart Control (Standard): Fast recipe management and commissioning with advanced PLC infrastructure and the Touchscreen LCD display offered as standard. Application Areas: Cutting, punching, and blanking operations on thick sheets Nedozwt Nwepfx Ahnelf Cold shearing and heavy metal forming applications Automotive, white goods, and heavy industry production lines ✅ STANDARD EQUIPMENT Steel construction, rigid frame structure Guide system with bearings on 4 surfaces Spheroidal cast iron connecting rod and bearing housings 4140 heat-treated steel crankshaft and transmission shafts Pneumatic clutch and brake combination Touchscreen LCD display and PLC control system Manually adjustable stroke and mechanical fuse Dual hand/foot control system Emergency reverse motor movement Full compliance with CE standards and occupational safety regulations ✅ OPTIONAL FEATURES Anti-vibration industrial pads Hydraulic fuse system Spare table Roll sheet uncoiler, driver, and straightener integration 8-bearing slide system Project-specific 1 set of die design and production ✅ TECHNICAL SPECIFICATIONS (150 TON) Capacity: 150 Ton | Motor Power: 15 kW (1450 rpm) | Stroke Rate: 42 strokes/min Table Size: 660×920 mm | Ram Size: 600×290 mm Throat Depth: 320 mm | Stroke Adjustment: 10–125 mm Ram Adjustment: 120 mm | Table Hole Diameter: Ø220 mm Table-Ram Distance: 500 mm | Slide-Table Distance: 540 mm Distance Between Columns: 500 mm | Floor-to-Table Height: 805 mm Die Clamping Slot Diameter: Ø55 mm Front / Side Anchorage Dimensions: 840 mm / 1300 mm External Dimensions (W x D x H): 1600 x 2280 x 2750 mm Approximate Weight: 7100 kg (Note: Please inform us if you have any technical modification requests specific to your production line.) ✅ MANUFACTURER'S GUARANTEE This machine is manufactured in Turkey with CRONOSSTECH engineering. Global exports, commissioning, and all post-sales technical support processes are directly managed by our expert team.

Condition: new, Year of construction: 2026, power: 7.5 kW (10.20 HP), pressing force: 80 t, stroke length: 100 mm, table width: 540 mm, table length: 740 mm, throat depth: 280 mm, ram plate width: 370 mm, total length: 1,400 mm, total width: 1,735 mm, total height: 2,220 mm, overall weight: 4,000 kg, Equipment: CE marking, safety light barrier, CRONOSSTECH CECP 80 | 80 Ton C-Type Eccentric Press | Sheet Metal Cutting and Forming Machine From CRONOSSTECH, Turkey's trusted press machine manufacturer, comes a 100% CE-certified 80-ton C-type eccentric press for your sheet metal cutting, punching, and cold forming operations. Offering industrial press solutions that provide minimal maintenance, maximum work safety, and flawless stroke accuracy in your high-volume production lines. Key Advantages for Your Industrial Production: High Repeatability: Ensures perfect part quality and minimal waste with stable stroke performance in serial production. Maximum Work Safety: Operator safety-focused design featuring a light curtain, double-coil safety valve, and mechanical safety mechanism. Low Maintenance Costs: Continuous, trouble-free, and long-lasting operation thanks to the central fully automatic grease lubrication system. Rapid Commissioning: Allows for immediate start of production with advanced PLC control infrastructure and dual hand/foot control. Application Areas: Sheet metal cutting, punching, and blanking operations Cold shearing and metal forming applications Automotive, white goods, and related industries' serial production lines ✅ STANDARD EQUIPMENT Rigid steel frame construction Bearing system with supports on 4 sides Spheroidal cast iron connecting rod and bearing housings 4140 hardened steel crankshaft and transmission shafts Pneumatic clutch and brake combination Manually adjustable stroke Emergency reverse motor operation Full compliance with CE standards and occupational safety regulations ✅ OPTIONAL FEATURES Anti-vibration industrial pads Touchscreen LCD display (standard for 150–300 tons) Hydraulic safety system (standard for 200–300 tons) Spare table Roll sheet unwinder, feeder, and straightener integration 8-bearing slide system Project-specific design and manufacturing of 1 set of dies ✅ TECHNICAL SPECIFICATIONS (80 TON) Nljdpfx Ahozwk S Nsnof Capacity: 80 Ton | Motor Power: 7.5 kW (1450 rpm) | Stroke Rate: 45–75 Strokes/min Table Size: 540×740 mm | Slide Size: 370×230 mm Throat Depth: 280 mm | Stroke Adjustment: 10–100 mm Slide Adjustment (Regulation): 85 mm | Table Hole Diameter: Ø190 mm Table-to-Slide Distance: 400 mm | Slide-to-Table Distance: 420 mm Distance Between Walls: 400 mm | Table Height from Ground: 755 mm Die Clamping Hole Diameter: Ø40 mm Front/Side Anchorage Dimensions: 670 mm / 1040 mm External Dimensions (W x D x H): 1400 x 1735 x 2220 mm Approximate Weight: 4000 kg (Note: Please inform us if you have any specific technical modification requests for your production line.) ✅ MANUFACTURER'S GUARANTEE This machine is manufactured in Turkey with CRONOSSTECH engineering. Global export, commissioning, and all after-sales technical support processes are directly managed by our expert team.

Condition: good (used), Bookbinding press with tapping block Njdpfezt H U Esx Ahnjlf The machine is fully operational and ready for use. Approximate format: 480 x 330 mm 3-ton pressure