Used Multispindle Lathe for sale (5,496)

Condition: used, Year of construction: 1996, turning diameter over bed 710 mm turning dia. over face-slide 420 mm turning length 2000 mm Knodpjxxmiyefx Adbjd control Manual Plus 3110 Heidenhain spindle bore 92 mm main spindle speeds: 16 - 1800 U/min cross movement 385 mm spindle head DIN 55027 - Size 11 spindle diameter in front bearing 140 mm power capacity at 100 % load 22,00 kW 2750 Nm feed x/z-axis 1 - 5000 mm/min rapid traverse X-axis 6,00 m/min rapid traverse Z-axis 8,00 m/min tailstock quill taper MT 5 quill stroke 210 mm diameter of quill 110 mm total power requirement 40,00 kW weight of the machine ca. 5,60 t dimensions of the machine ca. 5,00 x 3,00 x H2,50 m

Condition: excellent (used), functionality: fully functional, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Fagor DRO from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm Knsdpfjxyh Ndox Adbsd >> Longitudinal and Cross Feeds >> Thread Cutting: Metric, Module, Inch >> Infinitely variable spindle speeds from 30–3000 rpm Accessories: - 3-Axis Fagor Digital Readout - Tool cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Toolholder >> Drill chuck; live centre >> Collet chuck with collets >> Fixed and travelling steady rest >> Machine feet >> And much more About the Machine: Offered is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The machine runs quietly, even at high speeds. Equipped with a 3-axis Fagor digital readout and a wide range of accessories. The machine was previously installed in a university. You are welcome to inspect the machine under power on site and see its excellent condition for yourself.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 978/9, turning length: 400 mm, travel distance X-axis: 120 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,000 mm, overall weight: 3,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8 F, TRAUB TND 160 CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 36 A - Connected load: 18.8 kW The machine is equipped with a tailstock, a three-jaw chuck (diameter: 140 mm), an 8-position tool turret, and a chip conveyor. Knedpfjxx Ny Iex Adbed This is an item from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck

Condition: used, manufacture MONDIALE type Gallicop mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Kodpfxsxx A I Sj Adbsnd Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 1998, controller manufacturer: Okuma, controller model: OSP7000L, _____ Description: Year of manuf. : 1998 Control : Okuma OSP7000L Turning diam. : 340 mm Turning length : 250 mm Mainspindle: Technology:Motorspindle Kodpexxftwsfx Adbsnd Speed:4.500 rpm Power (max.):22 kW Barcapacity:65 mm Workpiecemeasurement:3-Jaw chuck, Kitagawa B-210 Toolcarrier I (X/Z): Technology:Turret with 12 Stations Taper:VDI40 Movement in X/Z:260/640 mm Rapid travers in X/Z:15/20 m/min Toolcarrier II (X/Z): Technology:Turret with 12 Stations Taper:VDI40 Movement in X/Z:140/615 mm Rapid travers in X/Z:15/20 m/min Equipment/Accessory: Chipmanagement:Chip conveyor :Coolingmanagement:; Coolant pump Toolmeasurement:Automatic Measuringarm Further Equipment:Trafo

Condition: used, Year of construction: 1989, turning diameter 165 mm turning length 200 mm Knjdpfx Adjxyagnobod control Fanuc total power requirement 13 kW weight of the machine ca. 1,7 t

Condition: used, Year of construction: 2002, turning diameter 570 mm turning length 3000 mm control SIN 810 D turning diameter over slide rest 345 mm spindle head DIN 55027 - Size 8 spindle bore 62 mm tailstock quill taper MT 5 spindle turning speed range 3 - 2.500 U/min total power requirement 35 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 7,50 x 2,10 x 2,00 m ManualTurn Version: V05.03.09 4-station turret SAUTER with various cartridges 3-jaw Schunk SCHUNK ROTA-S plus 2.0 Ø315-92 Kodjxb Ecqjpfx Adbond Tailstock Drill rod bore 100mm Fixed steady rest Ø315mm Chip conveyor bmf Bürener (new in 2025) with coolant pump Machine light

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Leadscrew and feed shaft lathe KERN Type D 20 A x 1000 Year of manufacture: 1987 HEIDENHAIN 2-axis digital readout Technical Specifications: Capacity • Center height: 200 mm • Swing over bed: approx. 400 mm Knedoxxvhrepfx Adbod • Swing over cross slide: approx. 200–250 mm • Distance between centers: 1000 mm Spindle / Drive • Spindle bore: typ. 52 mm • Spindle mount: Camlock • Speed range: approx. 12–1200 rpm • Main motor: typically 5–11 kW Feeds & Thread Cutting • Longitudinal and cross feed via feed gearbox • Capable of cutting metric and imperial threads • Leadscrew and feed shaft present • Automatic feed with safety clutches Carriage & Slideways • Heavy-duty cross and top slide • Top slide swivels ± 45° • Central lubrication for slideways • Gib strips adjustable Tailstock • Quill taper: MT4 or MT5 • Quill extension via handwheel • Longitudinally adjustable on bed • Partially with fine adjustment Bed & Construction • Heavily ribbed cast iron bed, flat or prism guideway based • One-piece bed, high rigidity • Precision ground guideways Coolant & Electrical Equipment • Coolant pump standard or optional • Electrics per machine guidelines at time of manufacture, often retrofitted • Direction of rotation switch, emergency stop, main switch Dimensions & Weight • Length: approx. 2.2–2.6 m • Width: approx. 1.0 m • Height: approx. 1.4–1.6 m • Weight: approx. 1500–2000 kg Description The KERN D 20 (D/DS series) is a robust universal lathe (focus: conventional turning, universally suitable for single and series production). It features a solid bed, fully enclosed cast iron bed with box-type base, and a wide range of commonly used accessories (Multifix toolpost, faceplate, coolant system, central lubrication).

Condition: good (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 6904-06, spindle bore: 65 mm, total length: 3,500 mm, total width: 1,200 mm, total height: 1,900 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 11 rpm, overall weight: 2,500 kg, BOEHRINGER D 420 lead and feed screw lathe - Operating voltage: 380 V - Frequency: 50 Hz - Rated current: 35 A - Distance between centers: approx. 1200 mm - Center height over bed: approx. 220 mm - Swing over bed: 440 mm - Center height over cross slide: 120 mm Ksdsxx Nu Eopfx Adbsnd - Swing over cross slide: 240 mm The machine is equipped with tailstock, MULTIFIX toolholder, and a RÖHM three-jaw chuck, diameter: 200 mm. Also features a two-axis digital readout by SONY. This item comes from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck.

Condition: new, Year of construction: 2025, functionality: fully functional, center height: 180 mm, turning diameter over cross slide: 212 mm, spindle bore: 52 mm, turning length: 1,000 mm, quill stroke: 152 mm, quill diameter: 52 mm, turning diameter: 360 mm, spindle nose: ASA D1-6, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, overall weight: 1,470 kg, Equipment: rotational speed infinitely variable, The SUN MASTER RML-1440V is a high-speed precision universal engine lathe designed for accurate turning, threading and general metalworking. It features a rigid cast-iron bed, hardened and ground ways, a powerful variable-speed spindle with two-range gear head (20–400 / 400–2500 RPM), and a D1-6 spindle nose. The lathe includes a full quick-change gearbox, power feeds for both carriage and cross-slide, a 4-way tool post, tailstock with MT4 quill, foot brake, constant-surface-speed (CSS) function, coolant system and an integrated lubrication system. The RML-1440V provides stable performance, precise control, and versatility for both production and workshop applications. The lathe is locate in our warehouse and ready for shipment and any time. Knjdpfx Aoxyh Nqsdbod

Condition: good (used), Year of construction: 1999, operating hours: 42,733 h, functionality: fully functional, machine/vehicle number: 01500001111, turning length: 1,500 mm, turning diameter: 500 mm, spindle bore: 70 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 8 rpm, overall weight: 3,200 kg, Completely overhauled by Gildemeister Bielefeld in 2010 Turning diameter: 500 mm Swing over cross slide: Ø 290 mm Turning length: 1,500 mm Spindle speed range: 8 – 2,800 rpm with three gearbox stages Knodpfexx Uqrjx Adbed Spindle bore approx. Ø 70 mm Three-jaw chuck Ø 250 mm, Röhm Tailstock quill: MT4

Condition: used, Year of construction: 1985, turning diameter over bed 500 mm turning diameter over slide rest 300 mm Knjdoxyagbspfx Adbed turning length 1000 mm

Condition: excellent (used), functionality: fully functional, Schaublin 102VM High-Precision Lathe in very good condition with extensive tooling >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 20 mm >> Spindle nose: Camlock >> Spindle speed range: 3 steps, 40–4000 rpm >> Dimensions (W x D x H): 151 x 57 x 124 cm Knsdpsxx Tqwefx Adbjd >> Weight: approx. 560 kg Accessories: Numerous tools in drawer cabinet >> Collet attachment with internal and external step collets >> Three-jaw chuck >> Faceplates >> Change gears >> Clamping devices with holders >> Drill chuck >> Fixed and travelling steadies >> Bed stop >> Machine feet and much more Offered here is a Schaublin 102VM high-precision lathe in very good condition. The machine is fully functional and comes with an extensive range of accessories. All guides are in excellent condition. The cross slides move smoothly and evenly. The lathe runs very quietly even at high speeds. The machine was previously in use at a university. Take the opportunity to view this machine under power on site and see its excellent condition for yourself.

Condition: used, functionality: fully functional, Locatelli Ariete 3 automatic lathe machine Knodpou Rqkmefx Adbod Length of scantling max/min 1000/200mm Scantling size max/min 85×85/20x20mm Maximum workpiece length 120mm with hole 150mm without hole Automatic material feeder Complete DTR documentation 3/4kw main motor Two spindle speeds 2500/3600rpm Oil pump motor 2.2kw Working pressure 6-8bar

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P1924825606, spindle bore: 65 mm, total length: 3,500 mm, total width: 1,200 mm, total height: 1,900 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 180 rpm, overall weight: 2,500 kg, CONVENTA VDF DUK 420 Lead and Feed Screw Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 35 A - Centre distance: approx. 1100 mm - Centre height over bed: 220 mm - Swing over bed: 440 mm - Centre height over cross slide: 120 mm - Swing over cross slide: 240 mm Ksdpfxexx Nr Rs Adbsnd The machine is equipped with a tailstock, a MULTIFIX quick-change tool post, and a three-jaw chuck from FORKARDT, diameter: 200 mm. Also included are various centres and a three-axis digital readout from ACCU-RITE. This item comes from a training workshop. FCA D-73235 Weilheim Teck, loaded on truck

Condition: new, CATALOGUE NUMBER M0261 TECHNICAL DATA number of spindles 21 distance between first and last drill 640mm distance between the centers of individual spindles 32mm max size of the workpiece 50 x 915 x 3000mm max drilling depth 65mm number of pneumatic clamps 2 height of the drill's working table 860mm max height of clamps above the table 70mm working pressure 6-7bar air consumption 10l/cycle engine power 1.5kW noise level 76.1dB speed 2800rpm dimensions length/width/height 1030/1030/1285mm weight 275kg PRODUCT FEATURES Main features of the machine: - Single-head drill for drilling in the range of 0 - 90 ° - Pneumatically adjustable head angle - Cast iron fences - Spindles adapted to quick connectors - Patented pneumatic material clamps - Cast iron work table - Quick and precise adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers 1.5 m long (right and left) with two stoppers - 5 quick connectors - Wooden box securing the machine during transport. ADVANTAGES - vertical/horizontal/angle drilling - multi-spindle - new machine - CE certificate - solid - professional Knedpfx Adjdpcfljbed Net price: PLN 16,400 Net price: EUR 3,950 Net price calculated according to the exchange rate of PLN 4.15/EUR (with larger exchange rate fluctuations, the price may change) - we send machines to every corner of the country - possibility of leaving another machine in the settlement. The prices given are net prices. The net price given for international transactions, customers from the EU with an EU tax identification number. Before placing an order for a new product, please confirm the availability and current price.

Condition: good (used), Year of construction: 2001, operating hours: 16,930 h, functionality: fully functional, machine/vehicle number: 01160012601, turning diameter over cross slide: 420 mm, turning length: 635 mm, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, Heidenhain EP 4290 TP CNC single-spindle lathe with controlled tailstock Gildemeister CTX400 Series 2 V3 Swing diameter over bed cover: 570 mm Swing diameter over cross-slide cover: 420 mm Cross travel: 220 mm Longitudinal travel: 635 mm Speed range: 25–5,000 rpm Spindle bore approx. Ø65 mm Chuck Ø 250 mm, by Berg Three-jaw chuck, hydraulically adjustable with various interchangeable jaws Tailstock with 550 mm travel Kodpfxoxx Upbo Adbsnd Tailstock quill MK4

Condition: excellent (used), Year of construction: 2002, Control: Siemens SINUMERIK 840D, C200-4D Spindle speed: 6000 rpm Travel X/Y/Z: 280/280/145 mm Number of turrets: 1 with 6 positions Number of tool stations: 2x4 Chip conveyor Kedpfexxmy Sjx Adbend Pallet conveyor belt Pallets

Condition: good (used), Year of construction: 2000, functionality: fully functional, Controller Fanuc 18i-T Knedoxvbbfspfx Adbsd NC controlled axes 6 Original Japan With barfeeder FMB mini turbo 2-16 / 3200 A For 3 m bars Max. turning dia 16 mm Max. drilling capacity 7 mm Max. tapping capacity M6 Rapid feed in X/Y/Z/ZB = 20/20/20 m/min Rapid feed in A = 78,5 m/min Feedrate in X/Y/Z/ZB = 10/10/10 m/min Feedrate A = 10 m/min Main spindle speed 500 - 12000 rpm Main spindle power 100/40% ED/Power 2,2 kW Outer tool places 6 Driven tool places 3 Rear side operation Max. turning dia D16 mm Max. part length 85 mm Sub spindle speed 500 - 8000 rpm Sub spindle power 0,55 kW Max. drilling capacity 4 mm Max. tapping capacity M3 Weight 1700 kgs Dimensions LxWxH = 2163 x 770 x 1650 mm Features, accessories - FMB Mini Turbo barfeeder 3 meter - C axis on both spindles - Low volt lamp - Hydraulic unit - Coolant unit (run with oil) - Central lubrication - Door interlock - Ready part conveyor The lathe was removed from production recently. Good condition.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, Vertical Turret Lathe - Single Column / Brand: JUNGENTHAL / Type: JU 25 Year of manufacturing: 1980 / Modernized: 2016/2017 The modernization of the JUNGENTHAL control system included: - CNC control system, - feed and spindle motor with controller, - control panel, - measuring systems, - control cabinet, - wiring & sensors, - software, - documentation. The machine can be inspected under power by appointment. Condition: Operational / ready for use. TECHNICAL DATA: CNC Control: SIEMENS SINUMERIK 840D sl Working area: - Turning diameter max.: 2.780 mm - Height with tool max.: 1.725 mm - Height with special holder max.: 1.820 mm - Height without tool max.: 1.995 mm Faceplate: - Diameter: 2.500 mm - Load capacity max.: 20 tons - Speed: 0,63 : 150 rpm Ram: - Stroke max.: 1.000 mm - Diameter: 280 mm - Feed: 0 : 1.000 mm/min - Rapid speed: 5.000 mm/min Travels: - Crossbeam: 1.500 mm - X-axis: 1.800 mm - Z-axis: 1.000 mm - Total power requirement approx.: 80 kW - Machine weight approx.: 55 tons ADDITIONAL EQUIPMENT/ ACCESSORIES: Grinding device: - Speed max.: 1.500 rpm - Height from the faceplate max.: 1.320 mm Tailstock: - Height to tip max.: 1.565 mm - Height between peaks max.: 1.530 mm Automatic tool changer (automatically clamping of holders in the ram): - Magazine with 6 positions - Claw boxes - Documentation Knedpexwl Sdsfx Adbsd - Various tools, accessories ... There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

Condition: good (used), Year of construction: 1985, greates pass round over bed 810 mm swing diameter over face slide 560 mm centre distance 00 mm bed width 480 mm slide valve travel 400 mm upper head travel 180 mm turning tool - shaft cross cut 32 x 25 mm power capacity 22 kW max. torque on the spindle 30 Nm spindle head Gr. 11, DIN 55027 spindle diameter in front bearing 152,4 mm Knsdpfoxn Ty Rsx Adbjd spindle bore 106 mm turning speed range 9 - 1800 U/min turning speeds 24 longitudinal feeds: 0,092 - mm/U face feeds 0,046 - mm/U metric threading 0,5-112 mm inch threading 1/4 - 56 G/1" thread - module mm thread - DP 1 - 224 Pitch tailstock quill diameter 115 mm quill stroke 225 mm taper of tail spindle MK 6 max. workpiece weight between centres 00 kg max. workpiece weight -without tailstock 750 kg 3-jaw chuck Röhm, Ø Overall size ca. 4600x1900x1600 mm weight ca. 4300 kg

Condition: good (used), Year of construction: 1986, controller manufacturer: TRAUB, controller model: TX 8, number of spindles: 1, CONTROLS .. CNC controls TRAUB TX 8 BASIC FUNCTIONS .. number of spindles: 1 .. number of x/z slides: 1 .. number of turrets: 1 .. live positions: yes .. number of c-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 450 mm .. turning diameter (max): 350 mm .. bar diameter (max): 60 mm .. worpiece length max.: 490 mm MAIN SPINDLE .. spindle revolutions (max): 4000 /min .. c-axis: yes TOOL MAGAZINE .. number of positions: 12 ELECTRICAL SPECIFICATIONS .. total power consumption: 39 kW .. mains voltage: 400 V .. mains frequency: 50 Hz Kedpfx Adexxqbysbend DIMENSIONS / WEIGHTS .. space requirements -left/right-: 3150 mm .. space requirements -front/back-: 2100 mm .. total height: 2100 mm .. total weight approx.: 4000 kg ATTACHMENTS (TURNING) .. tailstock: yes - Machine in good condition Features: - Complete tool holders (very comprehensive) - Includes driven tool holders - Documentation

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning length: 320 mm, spindle speed (min.): 8,000 rpm, bar passage: 32 mm, Machining Data Maximum bar capacity: 32 mm Maximum turning length: 320 mm Maximum drill diameter (front): 12 mm Maximum tapping size (front): M12 Main spindle speed: up to 8,000 rpm Sub spindle speed: up to 8,000 rpm Number of tools: 25 to 27 Dimensions & Weight Dimensions (W x D x H): 2,860 mm x 1,465 mm x 1,900 mm Weight: 4,300 kg Knjdpfx Adoxb R R Hsbsd 10-position turret Rotating tools for complex machining operations FMB Turbo 3-36

Condition: used, Year of construction: 2009, swing diameter 1600 mm face diameter 1400 mm Control Siemens Sinumerik 840D SL turning height 1245 mm max. table load 9000 kg table drive 60 kW torque - table 13400 Nm Table rpm 450 1/min speeds c-axis 0,004-5 1/min. feed range 18000 mm/min dimensions of the machine ca. 8,5 x 5,3 x 5,7 m weight of the machine ca. 47,4 t Crossbeam support: -Travel range X-axis: ± 950 mm Crossbeam stroke W-axis: 600 mm Ram : -Cross-section Ram: 250 x 250 mm -Plunging diameter: 340 mm -Travel Z-axis Ram: 1100 mm Drilling and milling device: - Distance between milling spindle and machine table 1245 mm - Tool holder SK 50 - Drive power 30 kW - Speed range 2000 rpm - Torque 1395 Nm Equipment/accessories: -16-40-fold pick-up magazine -Protective device -Various turning tool holders -Various SK50 tool holders and tools Knjdpfoxylm Tex Adbod -Various clamping devices -Coolant device with filter -Chip conveyor -Documentation

Condition: used, Year of construction: 2009, swing diameter 2800 mm faceplate diameter 2200 mm control Siemens Sinumerik 840D turning height 2140 mm max. table load 17000 kg table drive 80 kW torque - table 44900 Nm Table rpm 280 1/min speeds c-axis 0,006-7,5 1/min Kedpfoxylmyex Adbjnd feed range 18000 mm/min total power requirement 160 kW weight of the machine ca. 61,1 t dimensions of the machine ca. 11,4 x 6,53 x 6,6 m Crossbeam support: -Travel range X-axis: ± 1550 mm Crossbeam travel W-axis: 1200 mm Ram: -Cross-section: 300 x 250 mm -Plunging diameter: 380 mm -Travel range Z-axis: 1750 mm Drilling and milling equipment: - Distance between milling spindle and machine table - SK 50 tool holder - Drive power 30 kW - Speed range - 2000 rpm - Torque 1395 Nm Equipment/accessories: -24-72 times pick-up magazine -Protective device -Various turning tool holder -Various tool holders SK 50 with tools -Various clamping vices -Coolant device with filter -Chip conveyor -Documentation