Used Notching for sale (344)

Condition: new, Year of construction: 2025, Tube Notcher/Grinder AL 100 U ⦁ Grinds at any desired angle ⦁ Grinds any required diameter ⦁ Suitable for all standard materials ⦁ Designed for pipes and profiles - Operation via eccentric lever - Grinding belt 100 x 2000 mm - Motor 3.0 kW, 400 Volt, 50 Hz Hjdpox Irvmofx Ag Nsi - Speed 2905 rpm - Belt speed 30 m/sec. - For tubes from 20 mm to 76 mm - Weight 200 kg

Condition: used, Year of construction: 2019, gebraucht 2019 5505 prompt, Zwischenverkauf v Niederlande 2670 € 1 Hsdpowiqwlefx Ag Noi 100 x 2.000 mm 20 - 76,1 mm 1 3 kW 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 pce. grinding roll Ø. 42,4 mm

Condition: ready for operation (used), Technical characteristics Synchronized cutting and assembly milling 2 blades Ø 350 mm / 2 HOFFMANN cutters at 45° (cutter depth 70 mm max) Max. wood height 80 mm Max. wood width 90 mm Workpiece clamping cylinder Digital length stop Two-hand control Ideal for joinery, small woodwork, frames, moldings, fittings Power and Motors Pluging: Three-phased Overall dimensions Lenght: 1600 mm Height: 1470 mm Weight: 850 Kg Hodpfjradt Iex Ag Noi

Condition: new, width of the strips 100 mm band length 2000 mm band speed m/sec tube diameter 16,5 - 76 mm angle adjustable from - to 0 - 65 Grad connected load frequency 400 V total power requirement 2,2 kW weight of the machine ca. 0,17 t dimensions of the machine ca. 1,3 x 0,7 x 1,1 m Hedpfet Eaf Uox Ag Noi ipe grinding machine with 10 grinding rollers: 16.5 - 18.5 - 22.5 - 29.5 - 35 - 39.5 - 45.5 - 9.5 - 57.5 - 73.5 mm Pipe clamping area 90mm

Condition: new, width of the strips 200 mm Hodpst Eahisfx Ag Nei band length 1600 mm tube diameter 38 - 170 mm connected load frequency 400 V total power requirement 3,0 kW weight of the machine ca. 0,25 t dimensions of the machine ca. 1,4 x 0,8 x 1,35 m Pipe grinding machine with 11 sanding rollers: 38 - 42 - 48 - 52 - 60 - 74 - 90 - 102 - 116 - 138 - 170mm Pipe clamping area 170mm Documentation (English)

Condition: used, Year of construction: 2025, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V Hsdoxcg Evepfx Ag Noi total power requirement 2,5 /3,3 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 1,2 x 0,75 x 1,4 m Exhibition machine, unused. Belt sander with - 40 grit sanding belt - 8 sanding rollers

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15/30 m/sec tube diameter 20 - 76 mm angle adjustable from - to 30 - 90 Grad connected load frequency 400 V Hjdpfx Agjupw Rie Nsi total power requirement 2,5 /3,3 kW weight of the machine ca. 0,19 t dimensions of the machine ca. 1,2 x 0,75 x 0,7 m

Condition: new, Cutting capacity --- 1.6 mm Cutting range --- 152 x 152 mm Cutting angle --- 90° Hjdpjwmgltofx Ag Nei Stroke --- 20 mm Working table --- 450 x 300 mm Packaging size --- 550 x 500 x 550 mm Weight --- 95 kg

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. 3kw motor. Hjdpfx Aody Hm Deg Nei Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: new, Year of construction: 2026, neu 2026 090194 Mai 2026, Zwischenverkauf Spanien 22400 € 430.08 € 1 60 to 250 mm 5 40 x 11 mm 32 1/min 350 x 15 mm 120 x 10 mm 45 / 40 mm 10 mm max. 150x10 mm 5.5 kW Hsdpfx Agewirnxo Noi 1850 mm 1300 mm 2100 mm 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES!

Condition: new, Year of construction: 2026, neu 2026 090195 Mai 2026, Zwischenverkauf Spanien 15800 € 303.36 € 1 50 to 177 mm 5 1 31 x 12 mm 34 1/min 350 x 15 mm 80 x 8 mm 35 / 30 mm 10 mm 100 x 10 mm 3 kW 1300 mm 1100 mm 1850 mm 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! Hsdpowirahofx Ag Nji

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 49600 € 947.36 € 130 to 600 mm 5 2 50x18 mm 80 mm 600x18 (max. 600x20 mit D mm 120x120x11 (max. 150x150x mm 45/40 mm 130x12 mm 250x12 mm 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station Hodjynnggopfx Ag Nei bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 49500 € 945.45 € 60 to 500 mm 5 40x11 mm 32 mm 350x15 mm 120x10 mm 45/40 mm 150x10 mm 5.5 kW 1950 mm 2000 mm 1900 mm 1900 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH Semipaxy:Increased repeat accuracy instead of time consuming laying out ·including B&R 15" CNC with touchscreenand integrated keyboard ·automatic positioning in x- and y axis Hedpfx Aoynnb Reg Nei ·manual feed of sheet to the stop ·simple grafic programming by touchscreen ·working area 1.000 x 400 mm ·direct importing of DXF files possible

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 35600 € 679.96 € 110 to Hodpfx Agoynmrbj Nei 610 mm 5 40/20 bzw. 28/28 mm 80 mm 28 1/min 600x15 / 400x20 mm 152x152x13 mm 50 mm 13x52x90 mm 9 kW 2690 mm 1400 mm 2200 mm 3300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 72800 € 1375.92 € 165 to 610 mm 5 40/30 bzw. 34/34 mm 110 mm 31 1/min 750x20 / 400x30 mm 205x205x18 mm 60 mm 16x58x110 mm 15 kW 2950 mm 1600 mm 2200 mm 6300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photos) OPTION "KIT" € 970,-- Hodpfeynmq Rox Ag Nsi length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models of HYD 165 series: model S € 55.200,-- as model SD but 510 mm gap weight 5.200 kg (sample photos) WE HAVE MORE THAN 700 REFERENCES!

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: Hodpou Icmhefx Ag Nei -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 95 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. Hjdpfx Asu Icl Rjg Nsi *

Condition: ready for operation (used), hole punhing press: pressure 100 t output 40 in 22 mm Hjdpfx Aoxn Tydsg Nsi L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm - in checked conditions - machinevideo - ?v=oV49fdNM8dg Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz Hedpfx Aorzfh Hjg Noi - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, NC Multi-Blade - Double-Blade Saw for Light Metal MIKSITZ Year of manufacture: 1991 Circular saw, aluminium circular saw, table circular saw, mitre saw For cross-cutting and notching aluminium profiles Saw blade travel: 500 mm Max. cutting height: 100 mm Saw blade speed: approx. 5000 rpm Installed saw blade diameter: 300 mm Max. saw blade diameter: 400 mm Motor power: 5.5 kW Power supply: 400 Volt, 50 Hz Table size: 1100 x 1100 mm Table opening: 300 x 1100 mm Working height: approx. 1100 mm Tool holder: SK40 - Several saw blades can be mounted on a single work shaft with double-sided bearing - A long SK40 arbor serves as the work shaft - Belt drive between the drive motor and saw shaft - Table height adjustable via hand crank (to set cutting depth) - Fixtures and stops can be mounted on the table Hodsdzp Snepfx Ag Nsi - Saw blade movement via ball screw spindle with servomotor - Single-axis NC control for the cutting movement, LENORD + BAUER type GEL 7541.0000 - Separate control cabinet Space requirement (L x W x H): 1800 x 1600 x 1700 mm Weight: approx. 1100 kg

Condition: used, total length: 1,100 mm, total width: 1,670 mm, total height: 1,900 mm, Empty weight: 1.930 kg - Documentation available: No - CE certificate present: No - Serial number: 4422758897010 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 60 - Punch throat depth [mm]: 400 - Notching width [mm]: 70 - Max. plate thickness notching [mm]: 13 - Round bar cutting capacity [mm]: 40 - Shearing width [mm]: 400 - Max. plate thickness shearing [mm]: 20 Hedpsymfa Ujfx Ag Nji - Options: Length stop - Transport dimensions: 1100mm x 1670mm x 1900mm (l x w x h) - Transport weight [kg]: 1930kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1992, Max. sheet thickness: 4 mm steel Adjustable angle 30-120 degrees Blade length: 200 mm Hydraulic knife clamp and interlock Cutting depth continuously adjustable with digital display New top and bottom knife installed Hjdotmyibepfx Ag Nji Weight: approx. 1,000 kg

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Hedpfx Agjwnhd Hj Nei Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Price: On request Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Hedpfew Ryxmsx Ag Nei Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 70 - Notching width [mm]: 250 - Max. plate thickness notching [mm]: 6 - Round bar cutting capacity [mm]: 45 - Shearing width [mm]: 450 - Max. plate thickness shearing [mm]: 15 - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, operating hours: 100 h, machine/vehicle number: 12076, control type: manual, degree of automation: semi-automatic, actuation type: electric, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, electrical contact length stop, emergency stop, foot remote control, Deratech profile steel shear with punch unit, notching unit, flat steel shear up to 300x15mm and electric contact length stop. The machine was purchased in 2014 and has been stored ever since. Accessories as shown in the photos. All blades are as good as new. Hodpoynubqsfx Ag Noi FIXED PRICE – non-negotiable.