Used Pet Blow Moulding Machine for sale (65,774)

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit Lajdjwl Rucepfx Alyjh The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: used, Year of construction: 2007, Used Blow Molding Machine SIPA SFR12 18000 bph General Features of the SIPA SFR12 Blow Molding Machine The Used Blow Molding Machine SIPA SFR12 18000 bph performs PET container stretch blow molding and SIPA manufactured it in 2007. As a result of its SFR12 configuration, which includes 12 cavities, the system reaches a nominal speed of 18,000 bottles per hour. Consequently, it delivers high production efficiency across multiple formats. Specifically, this machine processes volumes from 0.25 to 2 liters. Therefore, it fits seamlessly into high-speed bottling lines, particularly in the mineral water and soft drink industries. Moreover, thanks to its compact layout, it optimizes floor space usage. Lsdpfxsxqmp Re Alysah Preform Compatibility and Technical Specifications This machine processes preforms with 3-start Alaska neck finishes and supports weights ranging from 12 to 34 grams. In particular, operators can quickly change formats thanks to the integrated quick-change system, which significantly reduces downtime. In addition, the automated system feeds, tips, and orients the preforms accurately. As a result, the machine ensures a continuous and correctly aligned flow into the heating and blowing stations. Furthermore, this setup minimizes manual intervention and improves process reliability. Notably, the Used Blow Molding Machine SIPA SFR12 18000 bph maintains stable, uninterrupted production across varying operational conditions. Integrated Systems and Automation The machine uses a Siemens PLC for core process control; thus, it guarantees reliable and intuitive management in industrial environments. Furthermore, the system includes certified safety protections, which enhance operator safety and regulatory compliance. Additionally, the air recovery system reduces energy waste and lowers operational costs. Equally important, the rotary blowing system distributes pressure and heat evenly across all cavities. Hence, the machine ensures uniform container quality even during high-speed operation. In comparison to older models, this version offers improved thermal control and air distribution efficiency. Operational Status and Technical Documentation Currently, the Used Blow Molding Machine SIPA SFR12 18000 bph remains in storage, although it is ready for recommissioning after standard inspection or overhaul. Fortunately, the machine includes original technical manuals, available spare parts, and revision records, which together facilitate seamless installation and integration. Moreover, the documentation enables faster troubleshooting and efficient maintenance scheduling. Technical Summary for Line Integration Overall, the Used Blow Molding Machine SIPA SFR12 18000 bph delivers a robust and high-performance solution for production facilities that require consistent, flexible, and high-throughput blow molding. Because of its solid engineering and standard-format compatibility, it serves as a strategic asset for companies looking to upgrade or expand bottling capacity. Furthermore, the availability of auxiliary components and spare parts, along with comprehensive documentation, allows for rapid and reliable integration. Ultimately, this machine enhances line performance while supporting operational continuity and cost-efficiency.

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Ljdpfeyhbt Hox Alysah Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Year of construction: 2024, condition: new, We are offering this new Machine Wala Enterprise MSA-2 double-die semi-automatic paper plate making machine, manufactured in 2024. Manufacturer: Machine Wala Enterprise Model: MSA-2 Year of Manufacture: 2024 Condition: New Category ID: 691 Type: Double-die semi-automatic paper plate making machine Laodpfxoz E Damo Alyoh If you have any questions or require further information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 1970, operating hours: 1,362 h, functionality: fully functional, machine/vehicle number: 9286, planing width: 600 mm, Planer machine Kupfermühle 5 spindles: bottom / top / right and left / bottom We have produced castle floorboards with this machine, and it was operational until the end. The machine can be demonstrated. Due to its age, it is sold without warranty or guarantee. Lasdpfx Asyyvuwelysh

Condition: used, Year of construction: 2019, Petratto DP66 Pressing Machine, used The Petratto DP66 is a professional pressing machine specifically designed for use in print finishing. It impresses with its robust construction, modern controls, and high flexibility when processing various paper formats and thicknesses. The machine is ideal for print shops and bookbinderies that value precision, reliability, and efficiency. Key Features - Robust industrial design for continuous operation - Easy operation via a clear control panel with emergency stop, start/stop, and program selection buttons - Digital control with display for precise settings and programming - Flexible feeder for various paper formats and thicknesses - Safety features such as emergency stop switch and protective covers - 400V connection for powerful operation - Year of manufacture 2019, ensuring modern technology and current safety standards Technical Specifications - Manufacturer: Petratto Srl, Italy - Model: DP66 - Type: 66 - Year of manufacture: 2019 - Power supply: 400 V - Control panel: Digital, programmable - Safety equipment: Emergency stop, protective covers - Application: Pressing tasks, further processing of paper All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price. Lajdpfx Aljw Evd Ajyjh

Condition: good (used), Code: 0234 Brand: SPANEVELLO - ITALY Model: SC 17 Automatic 7-spindle moulding machine for window frames, frames, profiles, joinery, carpentry, wooden packaging and various Technical data: Sturdy structure with electro-welded steel base Working width 170 mm Working height 120 mm Variable feed speed 5/25 mt/min Automatic lifting of upper beam Lajdpfx Alsxukgusyeh Composition: 1° spindle: Surface planer - Motor Hp 4 2° spindle: Right vertical spindle moulder - Motor Hp 4 3° spindle: Left vertical spindle moulder - Motor Hp 4 4° spindle: Right vertical spindle moulder - Motor Hp 4 5° spindle: Thickness planer - Motor Hp 7,5 6° spindle: Right vertical spindle moulder - Motor Hp 4 7° Universal spindle 180° - Motor Hp 8,5 Diameter of shafts of working heads mm 40 Shaft rotations of working heads 6000 rpm Power of feed motor Hp 2 Suction inlet diameter 150 mm Overall dimensions mm 4800 x 1650 x 1450 h Weight kg 3000

Condition: used, Year of construction: 2000, Overview  This PET blow-moulding machine was manufactured in 2000 by French company SIDEL. The machine is currently in good working condition, running in production until the end of November 2025. It will be dismantled and craned out through the roof, with craning scheduled for December 2025. It becomes available after dismantling. Technical data - Capacity: - 7,600 bph on 1.0 L - Formats: - Neck finish 29/21 - Preforms processed: RPET Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds Lsdpfeyb Tbpsx Alysah - Sidel caterpillar oven - 6 heating modules - Sidel preforms tipper - Sidel preforms hopper & feeder - Sidel preforms infeed rail - Sidel caterpillar oven & blowing wheel - Solenoid valves Sidel Universal type - Sidel PCC version V2.02 - Sidel CE electrical cabinet (Siemens) - Service history: - Sidel maintenance completed September 2024 - Elongation sensor retrofitted - Additional service by client’s technicians Scope of Delivery  - Stretch blow-moulder SIDEL SBO 6 Series 2 - Preforms tipper - Preforms hopper & feeder - Preforms infeed rail - Caterpillar oven & blowing wheel

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Ledpfxjxyu Ite Alysah

Year of construction: 2019, condition: used, Rated current: 53A, connected load: 29kW, an on-site inspection is possible. Laodpfx Ajz S Iuvslyeh

Year of construction: 1994, condition: used, There are three Arburg ALLROUNDER 370C 800-225 available, an on-site inspection is possible. Ledpfx Alsz Sr Rueyoah

Condition: used, Year of construction: 2008, Overview  This stretch blow-moulding machine was manufactured in 2008 by Italian company KOSME (Krones Group). The machine is in good working condition and remains in production until end of November 2025. It will then be dismantled and craned out through the roof. Technical data  - Capacity: - 10,200 bph - Working hours: - ~50,000 h - Formats: - Neck finish: 29/21 (can be modified to 1881 or others) - Preforms used: R-PET by Plastipak & Resilux - Number of moulds: - 6 (moulds not included) - Equipment & Features: - Quick change for shell molds - Kosme linear oven - 8 heating modules - Kosme preform tipper with conveying system - Kosme preforms feeding rail - Kosme electrical cabinet - Kosme Danfoss VLT drive - Kosme touch screen control panel - Set of spare parts (list on request) - Service history: - Kosme FBA maintenance - Complete Kosme service in October 2024 - Ongoing service by in-house technicians Scope of Delivery  Lsdpfx Asyb Tbiolysah - Stretch blow-moulder KOSME KSB 6R - Preform tipper with conveying system - Preform feeding rail - Electrical cabinet - Drive and control panel - Spare parts list (on request)

Condition: used, Standard tool set for edge trimming machine. Ljdpfxoz Dp H Nj Alyoah

Year of construction: 2016, condition: used, Rated current: 44A, connected load: 25,5kW, an on-site inspection is possible. Laodoz S Iucopfx Alysh

Year of construction: 2011, condition: used, Rated current: 95A, connected load: 53kW, an on-site inspection is possible. Ledpfoz S Ivasx Alyjah

Condition: new, Year of construction: 2005, Planing machine with infeed device EM 11 with 5th spindle at the bottom Includes 5 planing heads. Lodpfezvvuasx Alysah

Year of construction: 2015, condition: used, There are two Arburg ALLROUNDER 270S 350-70 available, an on-site inspection is possible. Ljdpfjz S It Sjx Alysah

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Lajdpfx Aowm Iy Ejlyeh Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Year of construction: 1994, condition: used, Clamping force: 500kN, heating power: 4.2kW, connected load: 19.2kW, weight: 2.2t, an on-site inspection is possible. Lodpoz S Iu Aefx Alyjah

Condition: used, Year of construction: 2020, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Lajdpfxozw D Has Alyeh Availability: immediate Inspection and trial run: possible by prior appointment

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Lodpfxswm Iz Nj Alyjah Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 805 kN, screw diameter: 42 mm, injection weight: 172 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 80M injection moulding machine. The BOY 80 is one of the most compact 80t clamp machines around, a great allrounder, fitted with the Procan 2 controller and 42mm diameter screw, which gives a shot weight of 179 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Laedowfpqcspfx Alyjh Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Year of construction: 2013, Application: PET preform injection molding Machine type: High-performance, two-stage PET preform injection molding system Clamping force: 2250 kN Injection configuration: P100/110 injection unit with E100 extruder Maximum PET shot weight: 3,344 g / 7.4 lb Minimum PET shot weight: 372 g Injection unit stroke: 340 mm E100 extruder PET transfer capacity: 3,613 g Tie bar spacing: 660 x 660 mm Ljdpfx Ao Abarkslyjah Clamping stroke: 755 / 920 mm Shut height range: 585 / 750 mm Daylight: 1,505 mm Ejector stroke: 200 mm Approximate clamping unit weight: 7,802 kg Approximate total injection unit weight without oil: 13,150 kg Compatible mold configurations listed by HUSKY: 6, 8, 12, 16, 24, 32 and 48 cavities Maximum listed cavity configuration: 48 cavities Typical preform applications include PET bottles and other high-volume packaging products Designed for high productivity, repeatable molding performance, and integrated preform production cells.

Condition: used, Year of construction: 2017, Overview  This rotary stretch blow moulding machine was manufactured in 2017 by Kosme. Laedpfeyybkdex Alyeh The machine is designed for the production of PET bottles for beverage applications. It is equipped with 6 cavities and was used for medium-capacity production. The machine has been dismantled in January 2026 and is available without moulds.  Technical data - Capacity: approx. 12,000 bottles/hour - Formats: up to 3 L PET bottles - Application: PET bottle production - Configuration: Rotary stretch blow moulding machine, 6 cavities - Neck finish: PCO 1881 Scope of Delivery - Blow moulding machine | Kosme | KSB 6R | 2017 | 6-cavity rotary machine, without moulds - Preform feeding system  - Chiller unit  - Air conveyor system  - Control system | Integrated HMI

Condition: used, Technical specifications: Max. planing width: 120 mm Max. planing height: 70 mm Spindle diameter: 30 mm Laedpfx Ajzgup Rslyeh Number of spindles: 7 Spindle arrangement: bottom, right, left, top, bottom, top, left Diameter of the dust extraction port: 7x120 mm Adjustable feed rate: 4-24 m/min Feed via universal joints Power supply: 400 V Total power: 17 kW Overall dimensions: Length: 2550 mm Width: 1050 mm Height: 1200 mm