Used Pocket Hole for sale (4,240)

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Itedpfxsw E H E Re Alxjk Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Technical Specifications: Manufacturer: Thompson Meat Machinery. Model: 4200 M/M single-shaft mixer grinder. Serial Number: TMG.4200.259. Itodpfx Alozuzl Uexsk Date of manufacture: 2002. Output capacity - up to 4,000 kg/h (depending on product). Hopper capacity - 390 litres. Mix capacity - up to 200 kg. Head size - #56. Supplied with various hole plates and other spare parts. Motors: Voltage (V): 415 V (for all motors). Frequency (Hz): 50 Hz (for all motors). Total Ampage: 35.8 A.

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840 D-SL, rotational speed (max.): 16,000 rpm, coolant supply: 50 bar, number of slots in tool magazine: 240, Equipment: chip conveyor, documentation/manual, Heller FP 4000 + SCHULER LoadMaster Compact Year of manufacture: 2013 Control system: Siemens 840 D SL Operating hours: approx. 40,000 h Spindle hours: approx. 20,000 h Spindle: SCU 63 unit, 16,000 1/min, 40 kW, 80 Nm Itodpfx Aleztmhlexjk X-axis: 800 mm, Y-axis: 800 mm, Z-axis: 1000 mm 4th axis (table/C-axis): NC rotary table, pallet size 500 x 630 mm 5th axis (head/B-axis): Swivel milling head (swivel range approx. +15° to -105°) Rotary table: 360,000° x 0.001° Power dynamic: 60 m/min 2x pallets GRM with DIN hole pattern Tool holder: HSK 63 A Wireless measuring probe, manufacturer: RENISHAW Tool magazine: 240 positions (chain type) PMS multiple clamping Chip conveyor for wet machining - Monitoring + collision detection Fast drill breakage detection NC rotary table Special design KMA Interface for extraction system Schuler Loadmaster Compact: LMC 900/FP4000 19x additional pallets with DIN hole pattern Siemens control system Available very soon Loading and disassembly possible

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Itodpeywnr Nsfx Alxok Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,780 kg, maximum load weight: 23,220 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs 2 wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 lockable plastic toolbox, W 600/H 425/D 460 mm Extendable outriggers to 3,000 mm Central storage compartment for timber planks 70 mm timber planks for 3,000 mm extension #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 4 pairs of 5 t lashing holes in gooseneck outer frame 7 pairs of recessed 10 t mushroom lashing points in top and side outer frame 1 on front gooseneck 6 in low bed First lashing point 250 mm from front, last max. 250 mm from rear 5 pairs of combined stake pockets with bolted ring lashing eyes, 5 t each, recessed in outer frame, approx. 72 x 42 mm internal size 2 pairs of additional 10 t folding lashing rings 1 on gooseneck (protruding) 1 recessed in floor behind last axle #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R 17.5 steel wheels, twin fitment, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads 24 V ABS and ALB with front ABS plug #Electrical System 24 V LED multi-chamber lights, yellow side LED lights, LED number plate light 2 front white LED position lights 2 rear white/red LED outline marker lights 2 x 7-pin non-interchangeable front plugs 1 LED beacon with bracket 2 pairs of illuminated LED warning boards, extendable to 3,000 mm #Floor Itodeznwzropfx Alxjk Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Approx. 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 6,500 mm #Loading Ramps Steel ramps, 3,000 mm long, 750 mm wide, laterally adjustable Additional folding lower ramp lock Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates 24/7 service hotline "Gewährleistungsverlängerung auf Rahmen auf 5 Jahre ab Auslieferungsdatum" Prepared for two-line number plate holder Reflective contour markings to ECE R 048, white sides, red rear #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Galvanised drawbar Hot-dip galvanised loading ramps

Condition: excellent (used), Year of construction: 1998, Haffner Door Lock Mortising Machine used, in good condition Manufacturer: Haffner Model: SL 100 Machine No.: 5372 Ijdpfeyuty Ssx Alxstk Column-type machine Chain mortising unit Door support Workpiece support Spindle for lever hole Spindle for faceplate Lubrication device Extraction port D 80/100 mm Required space approx. 1200 mm x 700 mm x 2000 mm Weight approx. 300 kg Location: 54634 Bitburg Delivery in as-inspected condition, without warranty or guarantee

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loaded platform height approx. 940 mm, 20 lashing rings each 6 t, 20 lashing brackets each 6 t, 18 lashing holes, 7 centre stake pockets, 14 outer frame stake pockets, 2 pairs container locks, Surcharge for front wall approx. 1,600 mm high, plug-in Price: €1,500 , Surcharge for extendable drawbar Price: €1,500 , Surcharge for 4 warning signs with lighting Price: €800 , Also available with load platform lengths of 8,600 mm, 10,000 mm or 10,500 mm! -- Subject to typing errors, mistakes and changes, sample images shown -- More data at: ! Itedpfx Aezrqgiolxsk

Condition: new, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,550 mm, suspension: air, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading height approx. 980 mm, 20 x lashing eyes per 6 t, 20 x lashing brackets per 6 t, 18 x lashing holes, 7 x stanchion pockets, centered, 14 x stanchion pockets in the outer frame, 2 pairs of container locks, surcharge for bulkhead approx. 1.600 mm high, pluggable Price: 1,500 ¤ , Surcharge for extendable drawbar Price: 1,500 ¤ , Surcharge for 4 x warning signs with lighting Price: 800 ¤ , , Also available in loading area length 9,000 mm or 10,500 mm! , -- Misprints, errors and changes excepted, sample pictures --, More data under: !, More Details: ! Itsdpfxjzrqkno Alxjk

Condition: new, Year of construction: 2026, functionality: fully functional, power: 1.5 kW (2.04 HP), overall weight: 575 kg, total width: 1,250 mm, total length: 1,340 mm, total height: 1,300 mm, type of input current: three-phase, load capacity per stand: 2,000 kg, Electronic rotary positioner with counter bearing and height adjustment via grid hole pattern Rotator Rotating frame Rotary machine Custom fixture available upon request. Product description:  Our moveFLEX duo combines ultimate precision with maximum flexibility. The manually adjustable height, using a grid hole pattern on both sides, allows optimum adaptation of the working height to various requirements. The electric rotary axis enables smooth and precise rotation of the fixture. Thanks to the combination of integrated wheels and forklift pockets for safe transport by forklift truck, the moveFLEX duo is perfectly suited for changing work environments. Field of application:  The moveFLEX duo is ideal for welding, assembly, and processing tasks, especially for applications that demand flexible and precise positioning.  Suitable for use in covered, industrial-grade workshops with temperature range of 10-40°C.  Level, load-bearing workshop floor with a maximum incline of 1%.  The moveFLEX duo must be connected only to power sources equipped with a compliant residual current device (30mA) RCD Type B. Safety features:  Emergency stop device on the control panel. Itedpfxex Hp Tto Alxjk Technical features:  Height adjustment: Individually adjustable working height.  Electric rotating mechanism: Precise rotation for optimal processing.  Flexible transport: Integrated wheels for easy movement.  Forklift pockets: Safe transport with a forklift truck.  Robust construction: Stable design for demanding industrial applications.  Safety & operator comfort: Intuitive controls for easy operation.

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm Itjdpezlbrvefx Alxjk - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: ready for operation (used), Drilling diameter: 3-25mm, drilling depth: 1000mm, connected load: 36kW, control: EST, 99 drilling memory positions per program, grinding and coordinate programming, plain text programming via input mask. Accessories: paper band filter, coolant cooling system, 4-door control cabinet, high-pressure pump up to 150bar, oil tank, 1 steady rest for smaller diameters at large drilling depths, direction-adjustable holder for drill bushing holders, various drill bushing holders, long clamping table for 0-height, tailstock stop and base plate for machine vice freely movable on the additional table, matching precision machine vice optionally available. Speed, high pressure, Z-axis (feed), X/Y-axes, and W-axis (approach slide) programmable via control. CPU and card rack defective (fan fault), machine therefore not operational, drives and guideways were fully functional until last operation. An on-site inspection is possible. Ijdpoylbrqefx Alxjtk

Condition: used, functionality: fully functional, Year of construction: 1989, For sale: TRUMPF MINIMATIC 100 punching machine. Lightly used, in excellent condition, and comes with many tools. The machine is connected and can be tested. We can provide training on how to use the machine; all instructions are available. Specifications: Make: TRUMPF MINIMATIC 100 Ijdpfjy Udrmjx Alxjtk Made in: Germany Year: 1989 Capacity: 15 T / 150 kN Other: Automatic 9-tool changer Weight: 5T If you have any further questions, please do not hesitate to ask.

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2013 Itedpfxox E Ings Alxek In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: excellent (used), Year of construction: 2023, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: 4110, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,400 mm, overall weight: 11,000 kg, spindle speed (max.): 4,000 rpm, coolant supply: 7 bar, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 14, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CMA GRD 4514 The CMA CNC machining center GRD 4514 offers a highly efficient solution for flexible drilling, threading, and milling operations in an extended format. Equipped with a 13.1 kW motor and a spindle speed of 50 to 4000 rpm, the system enables effortless drilling of holes up to 36 mm, as well as the cutting of threads up to M24 (based on ST 40 and HSS-Co cutting insert drills). - Extended work area and travel ranges: Table dimensions: 4500 x 1330 mm (effective machining length X-axis: 4500 mm) - Travel ranges X/Y/Z: 4500 x 1450 x 500 mm - Chip conveyor: Directly integrated into the machine table for optimal chip removal Productivity through pendulum operation: Thanks to the generous X-axis travel of 4500 mm, this variant is ideally suited for efficient pendulum operation. You can safely load and unload workpieces on one half of the table while the machine produces uninterruptedly on the other half. Protection is provided on the front side by a dynamically moving laser area sensor on the machine head. Software & Intelligent Control: Graphical programming: Including automatic determination of cutting data and nesting of multiple products, even different ones, on the large table. Collision warning: Integrated protection for maximum process safety. Height correction: automatic measurement and correction of the workpiece height for 100% precise countersinking and reaming. Iedpfxozuw Eqe Alxstk CAD/CAM extension: Optionally, a conversion of 2D/3D drawings directly into DIN/ISO machine programs is possible. Standard equipment of the complete system: - Automatic tool changer for 14 tools - Automatic tool length measurement - Fixed light curtain in the Y-direction (500 mm above the table) and rear protective fence - Powerful coolant system with emulsion - Ethernet connection for fast remote service

Condition: like new (used), Year of construction: 2016, operating hours: 40 h, functionality: fully functional, total length: 2,400 mm, total width: 1,200 mm, table height: 300 mm, table width: 1,200 mm, overall weight: 2,600 kg, pivoting range: 360 °, table length: 2,400 mm, workpiece weight (max.): 2,000 kg, plate diameter: 2,400 mm, Equipment: 3rd hydraulic function, 4th hydraulic function, documentation/manual, foot remote control, Like-new Demmler welding table. Control via remote control or foot switch possible. Control with touchscreen Beckhoff, including program memory and USB interface, directly on the control unit. Special equipment: - Additional holes with M24 thread - Small Demmler plate 600x600mm, also with additional M24 thread. Documentation, electrical circuit and hydraulic diagrams Ijdpfx Alszumgwexotk Software

Condition: ready for operation (used), Year of construction: 2012, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: 274 F, turning diameter over cross slide: 65 mm, turning length: 223 mm, turning diameter: 160 mm, spindle bore: 100 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 3,000 rpm, travel distance X-axis: 115 mm, travel distance Y-axis: 69 mm, travel distance Z-axis: 230 mm, spindle motor power: 17,000 W, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, rotational speed (min.): 60 rpm, Equipment: documentation/manual, Multi-turret automatic lathe with numerical control (CNC), counter-spindle (sub-spindle), and motorized turret: CNC automatic lathe MUPEM WIN 6500, designed for precision machining in large series from bar stock. Robust multi-turret machine construction, equipped with a main spindle, counter-spindle (sub-spindle) with a synchronous drive device (pick-up), motorized turret, and independent front and rear transverse/vertical carriages, enabling simultaneous operations and highly efficient machining cycles. CNC control with color touchscreen (MUPEM interface), providing real-time display of the spindle, sub-spindle, turret, carriage positions (Z turret, Longitudinal, Front, Rear, Vertical 1, and 2), chuck, pick-off, and auxiliary outputs. Complete manual control panel: manual/automatic mode, speed selector (slow/medium/fast), increments (small/medium/large), feed potentiometers, and spindle speed percentage, emergency stop button, and locking key. Equipped with a bar feed system (Hydrobar LNS type loader, visible in the images), chip conveyor (Auxkal), and coolant system. Main technical features Headstock Maximum bar capacity with chuck: 65 mm Maximum chuck diameter: 160 mm Front spindle bearing diameter: 100 mm Main spindle Power: 17 kW (variable AC) Speed range: 60–3,000 rpm Turret 8 stations (1" hole), optional 6 stations (1 1/4") Maximum working travel: 230 mm Maximum feed force: 12,000 N Rapid traverse rate: 15 m/min Indexing time: 0.3 s Motorized turret 6/8 stations, 6/4 driven tools Tool holder shank diameter: 1 1/4" Maximum drill diameter: 16 mm / tap: 12 mm Motor power: 2 kW — max. 3,000 rpm Synchronous turret drive (Pick-up) Maximum clamping diameter: 32 mm Power: 2 kW — max. 3,000 rpm Transverse carriages Maximum travel: 69 mm Maximum feed force: 12,000 N Maximum longitudinal travel (6-axis version): 115 mm Vertical carriages Maximum travel: 69 mm Longitudinal adjustment: 50 mm Maximum feed force: 12,000 N Hydraulic system Pressure: 70 bar Tank capacity: 75 l Coolant system Flow rate: 30 l/min Pressure: 1.5 bar Capacity: 80 l Dimensions and weight Height from floor to spindle center: 1,135 mm Required area (approx.): 2,600 x 1,660 mm Overall height: 1,700 mm Approximate weight: 3,000 kg Included equipment Hydrobar type bar loader/feeder (LNS) Itodpfxozk D Sij Alxjk Auxkal chip conveyor Coolant system Motorized turret with various clamping tools MUPEM CNC control with touchscreen

Condition: used, Year of construction: 2013, Alberti Vector B/CN is a vertical coordinate borer designed for precise drilling and machining of flat materials. The machine features continuous workpiece feed with automatic loading and positioning along the axis. Thanks to its monolithic steel construction and four-axis control, it offers high rigidity, stability, and accuracy even under demanding operating conditions. Optimized work cycles enable efficient drilling, milling, and handling of the workpiece. The combination of multiple spindles, independent vertical units, and the option to use a saw makes this machine a versatile solution for the furniture and woodworking industries. Technical Data Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Processable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Axis positioning tolerance: ± 0.1 mm Spindle motors: 2 × 1.5 kW Spindle speed: 3800 rpm Independent vertical spindles: 30 units, 32 mm pitch Iodpsxgfg Tjfx Alxetk Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Exhaust air speed: 30 m/s Chip extraction capacity: 5000 m³/h Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 12,200 mm, loading space width: 2,550 mm, loading space height: 1,300 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Wiese 3-axle semi-trailer in platform design with Fassi F545RA.2.26 crane Chassis Welded construction with cross members, made entirely of high-quality steel Neck construction reinforced for front-mounted crane Axles 3 BPW axles, each with a 9,000 kg load capacity, equipped with disc brakes ABS: 1 axle with sensor Axle spacing: 1,310 mm / 1,420 mm 3rd axle is a trailing steering axle (optionally available with forced steering) Itjdpfxsyihg Te Alxsk Tyres 6 x 385/65 R22.5, mounted on steel rims Lighting system 24V lighting system according to EU regulations 76/756/EEC ff., featuring: 2x2 three-chamber LED rear lights 1x LED reversing light 1x LED fog lamp LED side marker lights Lane marker lights Number plate illumination 2x 7-pin sockets + 1x 15-pin socket, wired according to EU standard Floor Phenolic plywood flooring Steel chequer plate above the axle area Load securing Outer frame with D030 mm lashing hole profile in the inclined edge 2x12 lashing points, 8,000 daN on the outer frame 3 rows of combi stake pockets for 80x80 mm plug-in stakes in the lowered bed area Accessories 2x wheel chocks with bracket Spare wheel bracket with winch 2x storage boxes with drawers (for chain storage) etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional stabilizer support 360° working range approx. 100% outreach to the front The attached images are sample images. We manufacture crane semi-trailers in a variety of versions. For further information, please do not hesitate to contact us. Upon request, we will be happy to provide a customised quotation based on your required specifications.

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Ijdpfjxzp Rlex Alxotk Max Boring Length 4000mm Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Max boring length if using the 500mm hollow spindle 4000mm

Condition: excellent (used), Year of construction: 1993, Catalogue number 7718 TECHNICAL DATA - Number of spindles: 23 pcs - Head prepared for screw-in drills - Distance between outermost spindles: 704 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 1200x850 mm - Height to table surface: 930 mm - Feed cylinder stroke: 70 mm - Max drilling diameter: 12 mm - Drilling adjustment vertical/horizontal and at an angle - Drilling unit adjustment pneumatic - Main motor: 2×0.75 kW - Dimensions L/W/H: 1270x1330x1350 mm - Weight: approx. 700 kg Iedpeztv Iuefx Alxstk ADVANTAGES – Made in Poland – 23 spindles – Head prepared for screw-in drills – Not repainted – DTR technical documentation – Used drilling machine, very good condition Net price: 8900 PLN Net price: 2120 EUR based on exchange rate of 4.2 EUR (Prices may change depending on currency fluctuations)

Condition: excellent (used), For sale: complete German-made measurement kit for diagnostics and machine setup, ideal for service, production, and inspection applications. The kit includes: • ROTUX Pocket Strobe™ stroboscopic lamp • Operating range: 30 – 12,500 FPM (flashes per minute) • Built-in display and adjustment dial • Battery powered (ANSMANN charger included) • Original case with foam insert Additionally: • HOLEX dial indicator 0–10 mm, accuracy 0.01 mm • NOGA magnetic base with adjustable arm • Set of adapters and holders • Mounting elements and cables • All components in excellent technical condition, from a working workshop Manufactured in: Germany Condition: very good, complete set, not worn out ⸻ Iedpfx Aljupuk Hoxstk Ideal for service technicians, precision mechanics, or for monitoring rotational movement, shaft alignment, vibration, or synchronization in drive systems. The ROTUX lamp is a professional tool, not a Chinese replica.

Condition: excellent (used), IM Very good condition. Itedeytc Naepfx Alxjk

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, Paper punching machine (for creating perforations) for WIRE-O spiral binding. The device is designed for continuous operation and heavy-duty use. The machine has 2 tools for punching 3:1 holes, 4x4 mm square. After the holes are punched, the sheets fall onto a collecting table at the end of the machine. Quick and easy tool change (5 minutes). Maximum sheet size for punching: 550x500 mm, minimum 150x150 mm. Power supply: 1.5 kW, dimensions: 2800x1200x1250 mm, net weight: 950 kg. Itsdpfx Aljzuzxhsxok A video demonstrating the machine's operation can be sent upon request.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg Itsdpfjrll I Usx Alxok - with: - 2 E. foot pedals for two separate work stations - Turntable

Year of construction: 2022, condition: used, functionality: fully functional, machine/vehicle number: 3352, RAMPF dispensing system with MS-S mixing system (static) Material used: Rampf RAKU PUR 21-2080-1, component A and component B The dispensing head has been extended with a Y-shaped slide. Isdpozgck Nofx Alxotk - Manual adjustment for the mixing system - RAMPF mixing system MS-S (static) - Pressure monitoring for component A + B - Material pressure tank 50 l for component A - Level monitoring for component A + B - Material recirculation to the dispensing pump for component A and B - Material evacuation for component A - Vacuum pump 25 m³/h - Waste container 60 l with pipe -> The collection trays have been replaced with mobile containers. - Trolley for waste or rinsing container - Container frame/machine frame, 3-part - Work table approx. 1,400 mm x 500 mm with table top - Transfer station for lid drum, component A - Transfer station for bung hole drum, component B - Dispensing control (Siemens PLC control based on S7-300) - Precision piston dispensing pump for component A and B - Positive displacement metering pump A, component, 257 ccm - Positive displacement metering pump B, component, 64 ccm --> 1 x spare positive displacement metering pump A and positive displacement metering pump B are included. These have been reconditioned by Rampf as an exchange unit. (see picture) Note: The potting system is located at our site in Austria.