Used Pool for sale (231)

Year of construction: 2024, condition: new, Magnetic separator for spool transport line Pipe magnet with 4 magnetic plates ( permanent magnet ) Hinged door for easy removal of the metal parts Tube diameter: 180 mm Bodpfxecqvhxe Addelr Available immediately Location: From stock 54634 Bitburg

Condition: used, Complete brewery system, consisting of: - Grist mill (ROBIX) with plate weigher - 2-device brewhouse with a wort capacity of 10 hl. One vessel as mash/wort kettle with bottom heating and internal boiler. One vessel as lauter tun/whirlpool. Made by Joh. Albrecht Brautechnik. - Plate heat exchanger (SONDEX) as wort cooler - Wort aeration (Donaldson) with sterile filter - 17.75 hl hot water tank, steam-heated, with pump. Made by Joh. Albrecht Brautechnik. - 5 cylindroconical storage tanks, each with a volume of 27 hl. Made by Joh. Albrecht Brautechnik. - Various beer hoses - Diaphragm pumps (FLOJET) as booster pumps, driven by compressed air - Beer pump (SAWA) for conveying 5 m³/h - Cleaning lance for dispensing tanks - CO2 warning device (Beviclean) - Further accessories with pressure reducers, tap heads etc. - Electric steam generator (VEIT) with an output of 60 kW - Compressed air system (KAESER), air compressor with refrigeration dryer - Water treatment (PENTAIR) - Refrigeration system with compressor, buffer tank, equalising tank, refrigerant pump - Pipework Additional title: 10 hl brewhouse with storage tanks and supply technology, largely built in 2019 Cast wort capacity: 1000 l Material: Brewhouse from stainless steel Bjdexwyzaepfx Addelr Features: Mash/wort kettle, lauter tun, whirlpool, wort cooling, wort aeration, hot water tank, 5 x cylindroconical storage tank, booster pump, beer pump, CO2 warning device; cleaning lance, pressure reducer, tap heads, hoses, refrigeration system, compressed air system, electric steam generator, water treatment, pipework

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Bsdpfx Adjf S I I Hjdolr Hight of spool: max. 180 mm

Condition: excellent (used), Year of construction: 2009, Used Bottling Line | Used Beverage Line | Soft Drinks NP 602 | PET BOTTLING LINE 12,000 BPH Speed: 12,000 Bph Blow molding machine SIPA Year: 2009 Number of cavities: 8 Preform elevator Preform orientator Chiller Formats of 05 L - 1 L - 1.5 L Monoblock TETRA PLAST RFA-40 Year: 1995 Filling type: aseptic Cap type: prethreaded plastic 38mm Caps elevator Dryer EUROPOOL Year: 2007 Type: air blades Labeling machine KRONES Type: roll-feed Sleever machine CLEVER 2019 With Steam Tunnel Bottle rejection system FMT dryer Year: 2011 Type: air blades SMI Bundler Bledpfx Aetqfcgsddor Year: 2009 TWIN PACK handle applicator Year: 2000

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF AgieCharmilles CUT E 600 – Used Wire EDM Machine, Year of Manufacture 2019 The GF AgieCharmilles CUT E 600 from 2019 is a high-precision and reliable used wire EDM machine, setting new standards in productivity, precision, and operating comfort through Swiss engineering and state-of-the-art technology. It is designed to meet the highest demands in tool and mold making, medical technology, and precision manufacturing. Main Features & Benefits Bledpfx Aoxwk Anjddsr ✅ Large Working Area and Robust Construction Traverse paths (X/Y/Z): 600 x 400 x 350 mm Traverse paths (U/V): ± 50 mm Max. workpiece size: 1030 x 800 x 350 mm Max. workpiece weight: 1,000 kg T-shaped design with a lowerable door for easy loading even of heavy workpieces ✅ Maximum Precision and Repeatability Glass scales on all axes for long-term accuracy without recalibration Contour accuracy up to ± 2 µm, surface roughness up to Ra 0.12 µm Thermally stable construction for consistently precise results ✅ State-of-the-Art Digital Generator (IPG) Up to 18% faster processing compared to previous models Anti-electrolysis technology for improved surface quality and increased service life Automatic power adjustment (POWER-EXPERT) to prevent wire breakage TAPER-EXPERT for taper cuts up to 30° over 77 mm height ✅ Intelligent Control – AC CUT HMI with 19” Touchscreen Windows-based control system with intuitive user interface 3D graphics, DXF import, and real-time process monitoring PART-EXPERT and WIRE-EXPERT for optimal cutting conditions and precise results Remote control included as standard ✅ High Productivity and User Friendliness Automatic threading and re-threading, even for hard wires Large 25-kg wire spool for extended operation times Energy-saving ECONOWATT system reduces idle power consumption to < 1 kW Compact footprint (approx. 4 m²) for optimal integration into any workshop Ideal For: ✔ Tool and mold making ✔ Precision components from steel, carbide, or copper alloys ✔ Series production and small batch manufacturing with high quality standards 📌 Our used 2019 machine undergoes professional cleaning, servicing, and thorough testing prior to sale to ensure maximum quality and reliability. 📩 Contact us for a customized offer or a demonstration!

Condition: excellent (used), Stratasys 3D Printer Dimension Here we offer you a Stratasys 3D Printer Dimension. Stratasys Dimension 3D Printer Blodpog Nt Tyefx Addor The Dimension 3D printer is part of the Design Series from Stratasys. Manufacturer: Stratasys Type / Printing Technology: FDM (Fused Deposition Modeling) Build volume: 20.3 x 20.3 x 30.5 cm Printable material / filaments: original ABSplus spools or also other ABS or Hips foreign material Dimensions and weight: 68.6 x 91.4 x 104.1 cm; 127 kg Build platform: plastic; reusable Software / file types / operating systems: CatalystEX / STL / Windows 10, Windows 8.1, Windows 8, Windows 7, Windows Vista Special feature: ideal for complex 3D models with a resolution of 0.178 mm or even 0.25 mm layer thickness. Type: Dimension Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer gladly on the phone for you.

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section Bljdpfxjxwvqqs Addsr • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials

Year of construction: 1994, condition: ready for operation (used), Offered is a lattice girder/girder production machine year approx.: 1994. Girder height: 80mm-300mm, upper chord: 5mm smooth/ribbed, diagonal: 7mm smooth, lower chord: 5mm smooth/ribbed, girder length max.: 14000mm, cutting grid: 200mm, spool payoff tables: 5 pieces. Inspection is possible by arrangement. Bodpfx Aoxz Ewboddolr

Condition: excellent (used), Year of construction: 2016, operating hours: 29,000 h, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, The offered Mitsubishi MP2400 from 2016 represents an excellent opportunity for companies engaged in or upgrading to high-precision wire EDM machining. With a total operating time of approximately 29,000 hours, the machine is in very good condition and fully operational. Demonstration or test runs are available, allowing interested parties to gain a direct impression of the machine’s condition and performance. Machine data & technical features Series specifications: • Control unit: Advance Plus2 • Max. workpiece dimensions (W × D × H): approx. 1050 × 820 × 305 mm • Max. workpiece weight: approx. 1,500 kg • Table dimensions: approx. 840 × 640 mm • Travel distances (X/Y/Z): approx. 600/400/310 mm • Wire changes possible between Ø 0.05 / 0.10 / 0.20 / 0.25 mm • Linear shaft motor drive system offering supreme precision in the micron range (MP denotes the precision package) Bsdpfx Adoxztuhedelr Special features of this machine: • Operating time: approx. 29,000 hours • Condition: very good, fully functional, demonstration possible • Integrated CAM system directly on the machine (machine programming) • 20-kg wire spool station for less frequent wire changes • Accessories (excl.): 8 clamping bars, various Erowa clamping devices, prisms and custom clamps, ionizer

Condition: used, Year of construction: 2017, NP 683 | USED KHS CAN FILLING LINE 25,000 CPH Capacity: 25,000 cans per hour Products: Beer and carbonated soft drinks Can format: 500 ml; 211/202 Year of manufacture: 2012, 2017 Current condition: Still installed – machine powered. Can be inspected in dry cycle. Available for dismantling: November 2025 Packaging: Cans will be packed in trays with shrink film. Line components: - Bulk can depalletizer: Linker DPG-500, year: 2012 - Can inspector: Transtech Hysek, year: 2012 - Can conveyor: Linker Conveyor RC/KHS, year: 2012 - Rinser: Linker Triplex Rinser TR/KHS, year: 2012 - Flash pasteurizer: KHS Innopro 140/14/85, year: 2012 - Filler: KHS Innofill Can DVD, year: 2017 - Seamer: Ferrum F08, year: 2012 - Lid feeder: NSM Lidserver A30, year: 2017 - Conveyor: KHS Innoline BTR, year: 2012 - Fill height inspector: KHS Innocheck CUB, year: 2012 Blsdpfx Asxd Ap Heddsr - Blower: Europool - Tray packer: KHS Kisters SP0502, year: 2012 - Tray pack conveyor: KHS Innoline GTR, year: 2012 - Handle applicator: KHS CSM 050-2, year: 2012 - Packing machine: KHS Innopack 035 B2+FS A-L, year: 2012/2017 - Palletizer: KHS Innopal PBL1N1, year: 2012 - Pallet stretch wrapper: SIAT MFP, year: 2017 - Pallet conveyor: KHS Innoline PTR

Condition: used, From € 216,00 now for € 194,40. Now with a 10% discount. Bljdpsvyqw Ijfx Addsr Pallet offer consisting of 72 used plastic stacking bins E1 meat crates 600x400x125 mm 25 liters. These meat crates are the standardized crates for the meat processing industry, also called pool “E” crates and can be used between temperatures of -30ºC to +80ºC. Equipped with a

Condition: excellent (used), Trumpf Type: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality in-house by a TRUMPF technician. We provide a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam switched on: 17,731 hours Laser Metal Fusion Machine (Metal 3D Printing) Flexible solution for industrial additive manufacturing The TruPrint 3000 is a universal medium-format machine (LMF / PBF / LPBF) with industrial part and powder management. You can now benefit from even greater flexibility, quality, and productivity for your additive series production: Productivity is almost doubled, regardless of the part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-lasers during the ongoing build job enables optimal quality for printed multi-laser components. The latest developments in inert gas flow further increase component quality and part reproducibility. This is documented parallel to the build job using melt pool monitoring. This allows compliance with documentation requirements, such as those in the medical field. The TruPrint 3000 is highly flexible and adapts to the individual requirements of our customers. With a build volume of 300 mm in diameter and 400 mm in height, it is used in a wide variety of industries. Depending on the component size and complexity, your workflow preferences, and production volumes, you can flexibly choose between internal or external unpacking – all under inert gas. With the latter, you also minimize 3D printer downtime by working parallel to production. Technical Specifications: TruPrint 3000 Build Volume (Cylinder): Diameter 300 mm x Height 400 mm Processable Materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Current material and parameter availability upon request. Preheating (standard) Up to 200°C Maximum laser power at the workpiece (TRUMPF fiber laser) 500 W Beam diameter 100 - 500 μm Layer thickness (individually adjustable) 20 - 150 μm Exposure speed (powder bed) 3 m/s Build-up rate 5 - 60 cm³/h Connection and consumption Electrical connection (voltage) 400/460 V Electrical connection (current) 32 A Electrical connection (frequency) 50/60 Hz Shielding gas: Nitrogen, Argon Design Dimensions (including filter) (W x H x D) 3385 mm x 1435 mm x 2225 mm Weight (including powder) 4300 kg The system was dismantled by the manufacturer; disassembly and functional reports are available. All axles are professionally secured. The system was constructed with 1.44.04 steel and, most recently, AlSi10Mg. Available from March 2025 Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone. Bsdpjvvl I Tsfx Addelr

Condition: used, Year of construction: 2011, operating hours: 6,895 h, power: 140 kW (190.35 HP), Equipment: air conditioning, all wheel drive, cabin, front linkage, 1400. GW25BK40525, 50 km/h road approval, electric power shuttle, powershift transmission with automatic mode, air conditioning, automatic AHK K80/trailing hitch, front hydraulics/PTO, Quicke Q75 front loader, 4 electronic rear spool valves, load sensing, rear PTO 540/750/1000 rpm, suspended front axle with brake, air brake system, panoramic roof window, touchscreen control monitor, radio... and much more. Errors and prior sale reserved. Bodpfx Aoxucameddjlr

Condition: new, At Wöhler, we have developed a range of wire processing machines that are primarily used in the brush industry. They can roll round wire into flat wire, count and bundle individual wires and crimp or cut both individual wires and entire strands to a specific length. There are also solutions for rewinding or coiling and twisting individual wires into strands. Cut wire strands to an adjustable length and knot the sections into bundles with the Wöhler WCB 200. Produce Bucher tufts with the FWB 700. Roll round wire into flat wire with the FWR 250 - including automatic wire thickness regulation. Wind this flat wire onto spools with the DC 510, cut it to size and bundle the counted sections. Wave, cut and bundle wire strands with the DA 400 or the DA 700. Wave and wind wire strands with the STW 87, the STW 96 or the USTW 6000. Bljdpfx Adsxzttkedsr Spool up to 44 individual wires into one strand - optionally including twisting. Get in touch with us. Together we will also find solutions for tasks not mentioned here.

Condition: good (used), Year of construction: 2025, Maynards is offering the machinery and equipment from GoodYear’s 17–22 inch passenger car and SUV tire production facility in Fulda. On-site production will continue until the end of September 2025. We invite you to express your interest and submit offers for the complete facility or larger equipment packages. Immediate purchase is possible. Products (until closure): - High-performance and ultra-high-performance tires - Run-on-flat tires - SUV/4x4 tires - Diameter range: 17–22 inches Plant and Systems: - Mixing lines (Banbury 1–3) - Extrusion lines (Triplex, Quadruplex) - Apexing and filling/weighing systems - Steel cord production (winders, extruders, carousel, spoolers) - Tire building machines (R2.5, SOC-88, R1, ISR1, cutting machines) - Calendering lines (Comerio, framework, winding machines) - Tire curing and finishing lines - Tire curing presses (HF & Krupp, 77 units) - Grinding and cut-to-length machines (Matteuzzi, Collmann, Roentgen, TR5, TR7) - Cutting and calendering systems (Bias 66, KEF HTBC, rubber calender) - Tire carts - Tire testing equipment Utilities and Supply Systems: - Steam boiler systems - Water treatment - Oxygen supply & compressors Bedpfx Ajxa Dqdeddjlr Storage and Infrastructure: - Silos & oil tanks - Fire protection and safety systems (plant fire brigade) - Material handling and transport equipment (forklifts, tow tractors, pallet trucks) - Hydraulic pallet turners Workshop Area: - Maintenance of machinery and equipment Notes: - All machinery and equipment is offered “as is, where is.” - All Goodyear-specific data has been removed, and the software has been reset to factory settings.

Condition: used, Year of construction: 2006, COMPLETE BOTTLING LINE KRONES 30,000 bph Product: still water Speed: 30,000 bph – 1.5 L PET Preform tipper - 2018 Model: m.tanner ag/prologic Caps elevator Gassner - 2006 Manufacturer: Gassner Preform aligner (part of the blow molding machine) - 2006 Monobloc with blow moulder, filler and capper Blow molding machine - 2006 Brand: Krones Model: Krones Contiform S20 Type: Rotary Number of molds: 20 Filler - 2006 Brand: Krones Model: Krones Volumetic Direction: Counterclockwise Number of filling valves: 84 Type of filling system: gravity flowmeter Capper (part of the monobloc) - 2006 Brand: Krones Number of heads: 18 Type of cap: Alaska 3 Principles Distribution system: pick & place Nitrogen dispenser - 2006 Model: Cryotech International Inspector for level control and cap - 2006 Model: Krones Checkmat Bottle transport - 2006 Model: Krones Synco Dryer tunnel - 2006 Brand: Europool Model: TF-04 Labeller - 2006 Brand: Krones Model: Krones Etima Type of labeller: Rotary Bedjvwcdzopfx Addelr Direction of rotation: Counterclockwise Type of labeling: Rollfed Number of stations: 1 Number of heads: 18 Type of applicable labels: OPP Plate handling: lobe cam Head adjustment: electric American input and 2 parallel outputs Label presence check on output tape Marker - 2015 Model: Markem Smart Lase C350 Shrink wrapper - 2006 Brand: OCME Model: Vega N70/2 Film launching Dual Input Handle applicator - 2006 Brand: Comag Model: Decimo HM 100/2 Equipped for bundles: 3x2 Dual Input Bundle transport: Brand: Europool Palletizer - 2006 Brand: OCME Model: Pegasus M400 Type: Layered Pallet warehouse Interlayer system Maximum workable height: 225 cm - pallet Workable pallet size: 80 cm x 120 cm Pallet wrapper - 2006 Brand: Bema Model: Silkworm Turbo Maximum workable height: 225 cm - pallet Wrapping type: rotary table Top sheet spreader Pre-stretch Pallet labeller - 2020 Brand: Eidos Model: 7P6ERLP

Condition: excellent (used), machine/vehicle number: BAGJ01026, S. No.: BAGJ01026 Equipment / additional information: Print Method: Inkjet Maximum Resolution: 2400 dpi (horizontal) x 1200 dpi (vertical) Printhead: PF-10 Number of Nozzles: 18432 nozzles (MBK/C/M/Y: 1536 nozzles x 2, PBK/PC/PM/GY: 1536 nozzles x 1) Minimum Paper Length: 203.2 mm (8.00 in) Maximum Printable Length: Rolls: 18 m (59 ft) // Sheets: 1.6 m (5.2 ft) Thickness: Rolls: 0.07-0.8 mm (3-31 mil) // Sheets: 0.07-0.8 mm (3-31 mil) Bsdpfx Ajxugubeddslr Maximum Outer Diameter of Roll: 170 mm (6.7 in) or less Inner Diameter of Supported Paper Spool: 50.8 mm/76.2 mm (2/3 inch)

Year of construction: 2025, condition: new, Winder for spool´s up to 10kg gross weight Bodpfxodlpyus Addolr with clamping conus and traverse guiding, adjustable speed and travelling width

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Bedpjwix Hhefx Addelr turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical data: Bjdpfx Ajxxbl Noddjlr - Capacity: 32,000 bph on 1.5L - Formats: 1500 ml - Filling product: Water and Non-carbonated drinks - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Equipment includes: Preform hopper – M. Tanner AG / Prologic Cap hopper – Gassner Preform orientator – M. Tanner AG Blow moulder – Krones Contiform S20 Filler – Krones Volumetric Nitrogen doser – Cryotech International Capper – Krones Bottle inspector – Krones Checkmat Bottle conveyors – Krones SynCo Labeller – Krones Etima Coder – Markem SmartLase C350 Shrink-wrapper – Ocme Vega N70/2 Handle applicator – Comag/Decimo HM 100/2 Pack conveyors – Europool Palletiser – Ocme Pegasus M400 Pallet wrapper – Bema Silkworm Turbo Pallet label printer/applicator – Bancale Eidos 7P6ERL

Condition: excellent (used), Year of construction: 2019, operating hours: 1,500 h, 3D Printer Manufacturer: Stratasys Model: F370 Year of manufacture: 2019 Build volume (XYZ): 355 x 254 x 355 mm Layer thickness options: 0.330 mm, 0.254 mm, 0.178 mm, 0.127 mm Supported materials: ABS-M30, ASA, FDM TPU 92A, ABS-ESD7, PC-ABS, Diran 410MF07, ABS-CF10, FDM Nylon-CF10 Connectivity: Wired (Ethernet) and wireless (Wi-Fi) options Materials: Bsdsxk Uvlepfx Addjlr Spools of 1470 cc: ABS white: 1 x 100% / 1 x 80% ASA grey: 1 x 10% PC-ABS black: 1 x 100%, 1 x 30% Spools of 980 cc: ABS blue: 1 x 10% TPU 92A: 1 x 100% QSR Support: 2 x 100%, 1 x 30% Accessories: - Build plates: 14 x new, 3 x used - Clean Station UW40 with large and small basket - Carrier 40 (cart for Cleaning Station) - Print head (TPU) new - Z-table Stratasys

Condition: used, Year of construction: 2006, Technical details: x-travel: 1800 mm y-travel: 2000 mm z-travel: 1100 mm pallet table size: 1850 mm table turning speeds: max. 200 1/min table load capacity: 3000 kg tool taper: HSK 100 spindle drive: 44 / 32 kW turning speed range - stepless: 10000 1/min numbers of positions in the tool changer: 120 control: 840D powerline FD shopmill classic SIEMENS transport dimensions LxWxH: 6,1 x 3,4 x 3,8 m weight of the machine ca.: 37 t 5-axis CNC universal mill-turning center, simultaneously, Bjdpjr D Tpfofx Addslr NC-mill-rotary table with pallet-device dia. 1.850mm, linear pallet pool for 2 pallets, Universal milling head with controlled B-axis, mode 4 prepared for 3D probe infrared HEIDENHAIN TS 640 (without touchprobe), BLUM-laser, internal coolant Supply 40bar, 980 l, with temperature control, internal airblast, SinTDI tooling management, TRANSMIT function, DMG netservice, flushgun, higher accuracy device, torque support for angle milling tools, tooling breakage control, chipconveyor, approx. 131.000h "machine on", approx. 80.500h "spindle on" *

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, Blodpfxopumdco Adder prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, Blodpfen Srxqex Addor approx. 112.000 h "machine on", approx. 79.500h "spindle on", *

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg Bljdpjwix E Rofx Adder workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *