Used Profile Bending for sale (8,711)

Condition: used, Engine and transmission for GRM 80 – according to the previous owner, the transmission was overhauled and has not been used since. Bedpjzw I Hqofx Am Esww ATTENTION!! This offer includes only the engine and transmission!

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 220692, Equipment: emergency stop, sheet width 1550 mm Bwedpfx Amszxt Txj Eow plate thickness 6 mm diameter of upper rolls 228 mm drive elektronisch zwei angetri

Condition: good (used), Year of construction: 1987, Press brake, bending machine, swing bending machine, die bending machine -Manufacturer: LOTZE Swivel bending machine with segmented upper jaw type 1512000 3.5 Bwjdpfx Aozwpm Som Ejw -Drive: mechanical, cam control semi-automatic -Max. working width: 2000 mm -Max. sheet thickness: 3.5 mm -Max. intermediate dimension: 180/280 mm -Accessories: 12 segmented upper cheek splints, 3 upper cheek splints -Connected power: kW -Dimensions: 3350/1250/H1600 mm -Weight: 2555 kg

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 2,200 kg, Double pallet fork ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2017 ISO 2A (41 cm) Bwsdpfezz Eavox Am Eew Capacity 2200 kg Side shift Opening range 560-1940 mm Width 1200 mm Fork length 1200 mm ID OS2087

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 2,500 kg, Double pallet fork Bsdpfezz Ebyjx Am Ejww ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2021 ISO 3A (51 cm) Capacity 2500 kg Side shift Opening range 560-1960 mm Width 1250 mm Fork length 1200 mm ID OS2100

Condition: new, CNC-38/R3 Max. Diameter (max. O.D.) 38 mm Max. Wall thickness 2 mm Max. Diameter (max. O.D.) for stainless steel 438 x 1.5 mm Max. Bending angle 190 (°) Hydraulic pump motor 11 kW Total motor power 22 kW Max. Hydraulic pressure 140 (bar) Mandrel Length 3450 mm Machine Length 5850 mm Machine Weight 3000 kg Bwedpsztpf Tefx Am Eow

Year of construction: 2026, condition: new, functionality: fully functional, travel distance X-axis: 3,010 mm, travel distance Y-axis: 330 mm, travel distance Z-axis: 260 mm, overall weight: 2,300 kg, feed rate X-axis: 55 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 12, swivel angle A-axis (max.): 180 °, number of axes: 4, ACROLOC SBZ 200 | 4-axis CNC profile machining center with German CAM software camQuix The ACROLOC SBZ 200 is a powerful CNC profile machining center for the professional and economical processing of aluminum profiles. The machine was designed for industrial use and combines high processing speed, precision, and flexibility with modern and user-friendly programming. A particular highlight is the German CAM software camQuix from camProx. It was specifically developed for the processing of aluminum profiles and offers clear 3D programming with DXF import, parametric machining, automatic tool assignment, intelligent clamping management, and collision detection. This allows machining operations to be conveniently prepared, visualized, and checked for potential collisions even before production. This reduces setup times and increases process reliability. Technical highlights: 4 interpolated CNC axes Spindle swivel range from -90° to +90° High-performance electric spindle with 5 kW Maximum speed 24,000 rpm Tool interface HSK F50 Automatic tool changer with 12 tool positions Additional position for a larger tool 6 automatic profile clamps Travel range X-axis 3,010 mm Travel range Y-axis 330 mm Travel range Z-axis 260 mm Speed X-axis up to 55 m/min Speed Y-axis up to 40 m/min Speed Z-axis up to 30 m/min Machine enclosure Industrial and robust machine construction The SBZ 200 enables milling, drilling, threading, pocketing, slotting, and free-form contour machining on aluminum profiles. Thanks to the 4 interpolated axes and the pivoting spindle, profiles can be machined from different angles without having to manually realign the workpiece for each machining side. The 6 automatic profile clamps ensure secure and stable workpiece clamping. In conjunction with camQuix, clamping positions are already taken into account during programming and included in the collision detection. Bedpfx Aozugtwem Esww The ACROLOC SBZ 200 is particularly suitable for window and facade construction, doors and portal systems, mechanical engineering, vehicle construction, and for general industrial aluminum profile machining. An interesting alternative in the premium segment With 4 interpolated axes, 24,000 rpm, HSK F50 spindle, automatic tool changer, 6 automatic profile clamps, and especially the German camQuix CAM software, the ACROLOC SBZ 200 offers an interesting alternative to established profile machining centers from Elumatec, Emmegi, Pertici, and Mecal. A significant advantage is the complete package of modern machine technology, powerful German CAM software, and direct technical support from ACROLOC. Inspection and demonstration are possible by appointment. Upon request, customer-specific profiles and concrete machining tasks can also be considered during the demonstration.

Condition: good (used), Year of construction: 1995, Buigmachine voor buizen van MARK / Ridgid Type: 2H B Bsdpjzulzgsfx Am Ejww Zonder gereedschap

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine Bedpezuzfbjfx Am Eeww - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2004, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, working width: 1,500 mm, sheet thickness (max.): 5 mm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of rollers: 3 Number of driven rollers: 2 Max. sheet thickness: 5 mm Max. working width: 1,500 mm Diameter of top roller: 140 mm Diameter of bottom rollers: 140 mm MACHINE DETAILS Drive: Hydraulic Bwsdpfx Amezza U Uo Esw Control: Conventional Power: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,900 x 900 x 1,400 mm Unladen weight: 1,200 kg Transport packages: 1 EQUIPMENT CE marking

Condition: used, Starrett Sigma HF600 Horizontal Floor Standing Optical Comparator Bwjdpfx Aszy Itpsm Eew 3 axes DRO Quadra Check 200 Joy stick control lenses 50 , 20, 10, 20, 100. tail centres

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, workpiece length (max.): 3,048 mm, workpiece width (max.): 1,524 mm, sheet thickness (max.): 3 mm, table load: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! The machine’s control system and software have been renewed! TECHNICAL DETAILS Sheet thickness for circuit boards with a tensile strength of 400 N/mm² max.: 3.5 mm Sheet thickness min.: 0.5 mm Punch head force max.: 4 presses with max. force of 7 t & 4 presses with max. force of 26 t Force of the lower cylinder max.: 6 t Double-punch punching force: 12 t (2 hydraulic punches) Length of the input sheet min.: 370 mm Length of the input sheet max.: 3,048 mm Width of the input sheet min.: 300 mm Bodpfx Aszzkt Uem Esww Width of the input sheet max.: 1,524 mm Diagonal of the input sheet max.: 3,408 mm Length of the output sheet min.: 250 mm Length of the output sheet max.: 3,048 mm Width of the output sheet min.: 60 mm Width of the output sheet max.: 1,524 mm Vertical travel of the scissor lift table: 550 mm Usable load capacity of the scissor lift table: 5,000 kg Dimensions of the transportable stack of sheets min.: 300 x 100 mm MACHINE DETAILS Electrical data Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Cooling capacity of the unit: 32.2 kW EQUIPMENT Scissor lift table TC27155C Motorized roller bed PRL3814F Universal destacking device DUF15 Punch head H2 Oil-dynamic hydraulic unit C1515 (3-part pump unit) Lower cylinder EI09 Double rotating punch P2R36 Water-air cooling unit R121 Refrigerant R407C Software RIO Control and management system MMACHNT-MICROMach Processor PENTIUM INTEL II 400 Mhz WINDOWS NT Documentation The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and for each day or part thereof will be charged. The fee must be paid before collection. The sale is made with the exclusion of any guarantee or warranty. The information on the technical data comes from the original offer. No liability is accepted for typing or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,500 kg, Double pallet fork ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 3A (51 cm) Capacity 2500 kg Side shift Opening range 560-1960 mm Bwsdpjz Amphefx Am Esw Width 1200 mm Fork length 1150 mm ID OS2101

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm material color: sendzimir galvanized total length: approx. 1.865 mm center-center-hole: approx. 1.825 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Bwedpsnbd Urofx Am Eew Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x C-profile, used Manufacturer: SSI Schäfer profile dim.: C: 60 x 40 x 8 mm Material color: sendzimir galvanized total length: approx. 1.015 mm center-center-hole: approx. 975 mm material thickness: approx. 1,50 mm Number of drill holes: 2 pcs. Drill holeØ: approx. 10 mm Remark: - Application area pallet racks - In double rack rows, push-through safety devices are required if the distance between the loading equipment or loading unit is less than 100 mm. - In single rack rows, push-through safety devices prevent load units from falling out unintentionally. - A push-through safety device can also be used to attach / mount rear wall grids. Your contact persons in our company: Mr.: Andre Evering Bwjdpfx Asnbfapsm Eew Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A beyond that desired transport or a shipment of this article is associated with additional additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, sheet thickness steel (max.): 3 mm, Equipment: swiveling upper roller, - Capacity 1050 x 3 mm - Roller diameter 90 mm - Conical bending - Swing-out upper roller Bwsdpfx Ajq H D S Rsm Esw - Brake motor - Foot control - Emergency stop - Documentation - 400 V

Condition: new, sheet width 1000 mm plate thickness 3,3 mm distance between columns 1050 mm diameter of upper rolls 90 mm total power requirement 1,1 KW Bwjdpfjrb Hcbex Am Eow weight of the machine ca. 0,445 t dimensions of the machine ca. 1,5 x 0,9 x 1,25 mm Sheet metal bending machine with special dimensions: - Capacity 1000 x 3 mm - Conical bending - Swing-out top roller - Emergency release safety device - Documentation - 400V

Condition: used, Wema Probst profile milling machine Bwsdjc N N U Nepfx Am Eew Main motor: 11 kW Disassembled and ready for loading.

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: SSI Schäfer Type designation: CS 300-4.0 Included in the scope of delivery: 1x CS Sigma profile, 2nd grade Material color: Sendzimir galvanized Overall length: approx. 3,800 mm CS Sigma profile: approx. 300x75x15 mm Bwsdpfoibvnrox Am Eew Material thickness: approx. 4.00 mm

Year of construction: 2004, condition: good (used), ProTec 2 caterpillar haul-off for profiles and tubes Year of construction 2004 Synchronous drive In good condition, ready to work Bedpfxoic Aayo Am Esww

Condition: new, Year of construction: 2026, number of rollers: 3, Equipment: swiveling upper roller, - Capacity: 700 x 4 mm - Conical rollers - Removable top roller - Brake motor - Foot pedal control - Emergency stop - Documentation Bsdsh Raytepfx Am Ejww - 400V

Year of construction: 1984, condition: good (used), Bihler RM 40 (1984) - Multislide punching stamping bending former Machine is shown with 5 slides, however, a 6th one is available. Several pay-offs for strip or for wire are available. Machine with 8-tons press and 5 or 6 slides - hydraulic clamping for wire or strip. One machine if fitted with a additionnal feeding system from the back of the machine, thru the center hole Bwedpfjh T Ulyjx Am Ejw

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage Bedetr U Hljpfx Am Ejww → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, functionality: fully functional, Year of construction: 2024, total height: 1,240 mm, WKS003 Tool cabinet set for bending with five vertical pull-outs of 180mm each Dimensions: W=1040mm, D=1300mm, H=1240mm Two-colour powder-coated (Trumpf) Housing: gentian blue structure (RAL5010) Bjdpfx Asur Itmom Eeww Pull-outs: white structure (RAL9002) Payload of 900 kg per pull-out Product code: 94032080 manufactured: DE/08 Weight: 445 kg net (475 kg gross) Pre-assembled as a set for approx. 33 running metres of press brake tools. Max payload 900 Kg for each drawer

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,500 kg, construction height: 1,450 mm, empty load weight: 575 kg, total length: 1,200 mm, construction width: 1,200 mm, Double pallet fork Load center of gravity: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Bsdpfx Aju Ah Tvem Ejww Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this device, we offer other forklifts and warehouse technology devices. Our devices are workshop and FEM4.004 tested. Please contact us by e-mail or by phone. You can also find us at hsr-gabelstapler Of course, we also buy your used truck, even without you purchasing a vehicle from us. Installment plan & financing on favorable terms are available on request. We will be happy to advise you competently and in detail about our vehicles.