Used Rosewood Veneer Rio for sale (1,440)

Condition: excellent (used), FWM 630 gluing machine Guodpjy Emmnjfx Alfsb

Condition: excellent (used), Year of construction: 1985, Feed rate 6 m/min. Dimensions (Length/Width/Height) 700 x 350 x 450 mm Total power requirement 0.2 kW Machine weight approx. 25 kg Year of manufacture 1985 Throat depth 420 mm - Foot pedal - Veneer thickness 0.4 - 2 mm - includes several Kuper spools Location: ex stock 54634 Bitburg - immediately available - Guedpfx Ajy E T Tnjlfeb

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Gusdpfx Asya I Iuelfsb Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: ready for operation (used), functionality: unexamined, total height: 1,200 mm, total length: 1,050 mm, total width: 480 mm, overall weight: 95 kg, with base frame throat depth 630 mm Gsdpfx Aeyuf Inolfsub workpiece thickness 0.4 - 2 mm feed rate approx. 10 m/min.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Kuper FW/M-630 T Godpfxjy Ivike Alfsub

Condition: used, Throat depth: 420 mmConstant feed rate: approx. 6 m/minDrive electric motor: 25 W, 190 V=Supply voltage: 110 - 235 V, 50 - 60 HzTotal connected load: 110 WHeating head: approx. 75 WNet weight: approx. 22 kg with foot pedalStorage location: Nattheim Gusdpfx Alsx Upgcjfeb

Condition: used, Year of construction: 1979, Pressing area: 2200 mm x 1100 mm Opening: 360 mm Heating: electric Plate surface: aluminium Emergency stop: no Pressing force: 65 t Gsdpfx Ajy A Hkbjlfoub Number of cylinders: 4 Power consumption: 21 A Machine length: 2500 mm Machine width: 1300 mm Weight: 2600 kg

Condition: excellent (used), functionality: fully functional, Veneer Splicer Kuper FW 1150 Working width: 1150 mm Gujdpfx Aeyylacelfob Veneer thickness: 0.4-3 mm Feed speed: 10-30 m/min Zigzag stitching Year of manufacture: 1997 CE mark Weight: 520 kg

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 2911, Depth: 920 mm Feed rate: approx. 20 m/min Veneer thickness: approx. 0.4 - 2.0 mm Operating voltage: 400 V, 50 Hz, 3-phase Total connected load: 0.97 kVA Godpfx Aljy Iadlsfoub Dimensions (L x W x H): approx. 1280 x 580 x 1470 mm Weight: 220 kg

Condition: used, table width: 1,400 mm, table length: 2,800 mm, total length: 6,600 mm, total width: 2,500 mm, total height: 2,600 mm, No. 3266 Feed-through veneer press Ott D 99 Used Short-cycle feed-through veneer press Pressing surface 2600 x 1400 mm LW Maximum opening width 150 mm Specific pressure 5.0 - 6.0 kg/cm2 Infeed conveyor belt, length 2800 mm Outfeed conveyor belt, length 2800 mm Guodpfsy A Rhkjx Alfob Transport dimensions approx. 6600 x 2500 x 2600 mm LWH Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: used, pressing force: 100 t, table width: 1,350 mm, table length: 2,550 mm, total length: 3,150 mm, total width: 1,550 mm, total height: 2,150 mm, overall weight: 5,000 kg, No. 04525 Veneer press Ott 300 K 2513 Used Very sturdy design with 4 longitudinal beams in the upper press section and 4 longitudinal beams in the press table Plate dimensions 2550 x 1350 mm LW Total pressure 100 tons Electric heating, replaceable heating elements Heating plates made of solid aluminum, covered with Mylar film Maximum temperature 150 °C Specific pressure 3.0 - 5.0 kg/cm2 4 press cylinders, each 90 mm in diameter Rack-and-pinion guide for the press table Button controls for Open – Close – Stop Circumferential emergency stop pull cord, configured for two-hand operation Opening width continuously adjustable up to approx. 420 mm Automatic pressure regulation via high-pressure gauge Pressure preselection table with 2 specified values for each workpiece size Godpfey Aplzjx Alfoub Transport dimensions approx. 3150 x 1550 x 2150 mm LWH Weight approx. 5000 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical data, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: Ex warehouse

Condition: used, Year of construction: 1978, used Manufacturer: Ott Type: JU60 Year of manufacture: 1978 Machine no.: 10838 GS-certified Panel size: 2200 x 1100 mm Maximum opening: 300 mm Tip control Safety rope Gusdpfey H N Tgjx Alfeb Electric heating Piston diameter: 80 mm 4 lower pistons Required space approx. 2600 x 1300 x 1900 mm Location: 97447 Gerolzhofen, free loaded, unpacked Transfer as seen, in current condition No warranty or guarantee

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 741883-01, Fisher + Rückle, Omnimaster 900, year of manufacture 2015 Veneer longitudinal splicing machine, bonding with urea glue, veneer thickness from 0.4-1.5 mm, feed speed: 5-50 m/min, dimensions (L x W x H): 2400 x 2000 x 1900 mm, weight approx. 1500 kg, connected load: 9 kW, electrical consumption approx. 4 kWh, compressed air: 5 NL/min, current 20A/300mA FI / RCD Gusdpfx Aey Idmkjlfjb Location: Switzerland

Condition: ready for operation (used), functionality: fully functional, power: 2.2 kW (2.99 HP), empty load weight: 350 kg, planing from above, optimal surface quality, processing speed 50 m/min, no need for intermediate sanding, trouble-free machining even of damp wood, maximum working width 250 mm, maximum chip thickness 3/10 mm, clearance height 1-180 mm, tool adjustment 0°-60°, motor power 2.2 kW, weight 350 kg. Gjdpfxey H Hkij Alfsub

Condition: good (used), Year of construction: 1982, still well-preserved veneer saw with planer unit max. cutting length 3050 mm Gujdpfoyizztex Alfjb no rear stop included

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Guedpfx Alst Eq E Ssfsb Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: good (used), Year of construction: 1982, Plate dimensions 2200 x 1100 mm Daylight opening 350 mm Number of daylights 1 St. Heating elektrisch Total pressure 65 to Motor output 1,1 kW Dimensions (L/W/H) 2540 x 1280 x 1900 mm Gusdpfxsyyqnxj Alfob weight of the machine ca. 2500 kg

Condition: excellent (used), Year of construction: 1985, still very nice veneer saw with planing head cutting length 3050 mm Guedpon An A Tjfx Alfeb with rear support and fence

Condition: good (used), Year of construction: 2001, Veneer saw with planing unit Guedpfx Ajivg Dzjlfjb cutting length 3500 mm with rear depth stop, adjustable by hand wheel no electr. feed

Condition: good (used), Year of construction: 1987, Veneer saw with planer unit, connectable with reversible knife planer head. Max. cutting length 3005 mm. With rear finger stop and scale. Guodpfx Alew U D U Hjfeb

Condition: good (used), Year of construction: 1994, functionality: fully functional, cutting length (max.): 3,100 mm, cutting height (max.): 45 mm, overall weight: 2,300 kg, Veneer shears with a maximum cutting length of 3100 mm Godpfx Aev Nzpmolfeub Maximum thickness 45 mm Built in 1994 With spare blade

Condition: excellent (used), Year of construction: 1997, still a very nice veneer guillotine from the renowned manufacturer Langzauner max. cutting length: 3100 mm with programmable width stop with CE marking Gjdpfx Asxvllujlfoub

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm with rear fence Godpjq Rb Irefx Alfoub

Condition: good (used), Year of construction: 1979, Veneer saw with planing unit Gusdpfx Aswimduolfjb Max. cutting length 3100 mm Functionally tested

Condition: excellent (used), functionality: fully functional, cutting length (max.): 3,100 mm, Veneer Guillotine Casati Macchine CIP31 Working length: 3100 mm Total length: 4070 mm Godoyzzccjpfx Alfsub