Used Runway for sale (166)

Year of construction: 2005, condition: used, machine/vehicle number: SB218+221, Demag Erikkila crane canopy Crane runway with steel structure Dimensions approx. 20.4m x 3.6m incl. 3 bridges each 500KG payload / lifting capacity Technical data of the system: Crane runway / steel construction made of HEA 180/200 girders Dimensions as follows: External dimensions - space requirement approx. 20.4 x 4m with overhead crane payload 3x 500KG with 3x Demag PK chain hoist Ijdorwi A Depfx Aanstr Approx. dimensions: Top steel structure 4.1m Lower steel structure 3.85m bottom running rail 3.35m Top of bridge 3.25m Bottom bridge 3m Hook height 2.5m Track width 3m Crane girder length 4m Internal dimension of supports 3.24m Track length 20m Base plate of the support 30x30cm Support HEA240 Running rails HEA240 Column spacing 10 + 10m System is supplied complete as delivered: complete steel structure + crane + 3x Demag PK 2 chain hoist 500KG Used condition Crane is disassembled and immediately available Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only

Condition: new, Year of construction: 2025, Blasting container with crane track HC 20 feet. Incl screw conveyor floor, bucket elevator, air classifier, vibrating screen, abrasive hopper, blasting unit with accessories, suction wall for abrasive recovery, filter system with pre-separator chamber, 4mm fabric rubber lining, lighting, emergency lighting, door limit switch, viewing window, electrical control Siemens logo, crane runway 500kg with statics and initial acceptance, CE marking with operating manual. Itjdpfxjiqnrvj Aaner

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only. Itodpow Ixz Uefx Aansr

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA28 - 14/796737, ABUS overhead crane, crane runway, bridge crane, workshop crane, overhead travelling crane Equipped with ABUS technology Load capacity / lifting capacity 1.6 t - 1,600 kg Span 9,550 mm, external dimension approx. 9,700 mm Year of manufacture 1998, floor control and scale included Crane is equipped with super fine lifting – speed 0.08–0.8 / 5 m/min Lifting height 6 m Hoist: GM816 L6-204.41.064.E Overall height from top edge of crane to hook approx. 710 mm (320 mm beam + 390 mm hoist) End carriage length without buffers approx. 150 cm Itsdpfxjw Hnvte Aanor Optionally, 2 x 40 m HEA240 crane rails available Crane is dismantled and immediately available Very good condition, inspection logbook available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and ABUS HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder possible, please inquire with zip code Collection preferred

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: KA1 - 16116/16117, Steel crane ceiling, crane runway, bridge crane, hall crane, crane Load capacity / lifting capacity: 5t - 5000kg Track gauge: 9550mm, overall width approx. 9700mm Year of manufacture: 1985 with pendant control Lifting height: 6m Hoist: ASL3412-20 Construction height (top edge of crane to hook): approx. 900mm Head beam length with buffer: approx. 240cm Itjdpfxjw Hnpge Aaner Attention! The runway rails on this crane are offset in height by approx. 20cm from right to left. This means that one rail would be installed higher than the other! Optionally, 2 x 40m HEA240 runway rails are also available. Crane is dismantled and immediately available Used condition, inspection logbook is available Also available: column-mounted slewing cranes and wall-mounted slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by carrier possible, please inquire with postal code Collection preferred

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: KA1 - 16114/16115, Steel overhead travelling crane, crane runway, bridge crane, indoor crane, crane Crane is available 2x in identical configuration!!! Load capacity / lifting capacity: 3.2t - 3200kg Track gauge: 9550 mm, external dimension approx. 9700 mm Year of manufacture 1985 with pendant control Lifting height 6 m Hoisting unit ASL308-16 Overall height from top of crane to hook approx. 900 mm End carriage length with buffers approx. 240 cm Optionally available: crane rails 2x 40 m HEA240. Isdpfow Hnmrjx Aanotr Crane is dismantled and immediately available Used condition, inspection book is available Column-mounted jib cranes and wall-mounted jib cranes are also in stock Demag KBK and Abus HB systems as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight carrier possible, please inquire with postcode Collection preferred

Year of construction: 2015, condition: excellent (used), machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Payload/lifting capacity 12.5t System technical data: Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only Itedpswgwrqefx Aansr

Condition: excellent (used), functionality: fully functional, Year of construction: 1998, machine/vehicle number: KA27 - 14/796736, ABUS overhead crane, crane runway, bridge crane, indoor crane, crane Itedpfxewzrtxj Aanor Payload / lifting capacity 1.6t – 1600kg Span 9550mm, external dimension approx. 9700mm Year of manufacture 1998 with pendant control Lifting height 6m Hoist GM816 L06 Overall height top of crane to hook approx. 710mm (320mm beam + 390mm hoist) End carriage length without buffers approx. 220cm Optionally, two running rails 2x 40m HEA240 are available. Crane is disassembled and immediately available Very good condition, inspection logbook available Pillar jib cranes and wall-mounted jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please inquire with postal code Collection preferred

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 20020363, Altmann Gantry Crane + Radio Control For clean rooms/laboratories or food processing areas Type ELP05-3.200-E_RR Payload/Lifting Capacity 500 kg System Specifications: Crane runway/steel construction consisting of HEA220 beams/square tubes mounted on 4 heavy-duty swivel casters. With 500 kg Altmann hoist including HBC radio control Overall height approx. 3.35 m Lower edge of track approx. 3.13 cm Depth approx. 150 cm Hook height approx. 2.9 m Test logbook available, remaining service life 99%!!! Crane is disassembled and available immediately The item is located in 75053 Gondelsheim Itodpfx Aswlb N Rjaner Very good, almost new condition, see pictures Shipping via freight forwarder or pickup only by appointment

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: KA31 - 110-006258, ABUS Kranhimmel bridge crane, crane runway, indoor crane Capacity / lifting load: 1.6t - 1600kg Track gauge: 9550mm, external dimension approx. 9700mm Year 2008 with floor control Lifting height: 6m Hoisting unit: GM800.1600 Installation height (top edge of crane to hook): approx. 660mm (290mm girder + 370mm hoist) End carriage length without buffers: approx. 220cm Optionally, 2 x 40m HEA240 crane runways are also available. Iodpfx Aewv I Risanetr The crane is dismantled and immediately available Very good condition, inspection book is available Column-mounted and wall-mounted slewing cranes are also available, as well as Demag KBK and Abus HB systems, Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder possible—please inquire with postcode Collection preferred

Year of construction: 1983, condition: excellent (used), machine/vehicle number: 20020233 UG 1 Brücke, DEMAG KBK crane canopy crane runway with dimensions approx. 29 x 6m (6m bridge - double girder crane) Payload / lifting capacity 1000 KG - 1to Technical data of the system: Crane runway made of Demag KBK2 rails with internal current routing System is supplied complete: KBK rails, rail joiners, trolleys, end plates, cable trailing, brackets/hangers etc. incl. Demag PK5 - 1000KG chain hoist - lifting height approx. 4m Crane is disassembled and immediately available Iodpfx Aaety Tdbjnetr Used condition, see pictures Item location is 75053 Gondelsheim Shipping by forwarding agent or collection by appointment only Demag KBK1 KBK2 and KBK3 tracks are stock items ! Other KBK installations are also in stock. Payload 125KG - 1600KG Please ask for your crane runway with load capacity and dimensions without obligation.

Year of construction: 1985, condition: excellent (used), machine/vehicle number: (20020324 EG) - VK-RES, DEMAG KBK crane canopy crane runway with dimensions approx. 16.5 x 7 m (7 m bridge - double-girder crane) Iedety S I Espfx Aanjtr Payload / lifting capacity 500 kg - 0.5 tonnes Technical specifications of the system: Crane runway made of Demag KBK2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable tray, brackets/suspension, etc. Incl. Demag PK2 500 kg chain hoist - lifting height approx. 4.5 m Crane is disassembled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or pickup by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125kg - 1600kg Please inquire about your crane runway, including load capacity and dimensions, without obligation.

Year of construction: 1989, condition: good (used), machine/vehicle number: TH2000/9953, DEMAG KBK crane canopy crane runway with dimensions approx. 9x4m (4m bridge) There are multiple copies of this crane! Payload / lifting capacity 500 KG - 0.5 tonnes Technical data of the system: Crane runway made of Demag KBK2 rails System is delivered complete: KBK rails, rail connectors, chassis, end plates, brackets/hangers etc. Incl. 500Kg steel chain hoist - lifting height approx. 3.5m Crane is dismantled and immediately available Used condition, see pictures Iedev Iakaepfx Aanstr Item location is 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125KG - 1600KG Please enquire about your crane runway with load capacity and dimensions without obligation.

Year of construction: 2013, condition: like new (used), machine/vehicle number: TH2000Messraum, DEMAG KBK crane canopy crane runway 9.3 x 5.3m (bridge travel distance approx. 5m) The crane is also available in other dimensions with raised chassis Payload / lifting capacity 500KG Technical data of the system: Itodpjv Iai Njfx Aanjr Crane runway made of Demag KBK2 rails with raised chassis - crane girder is between the two rails for maximum lifting height with internal power supply!! System is delivered complete: KBK rails, rail connectors, undercarriages, end plates, cable carriers, holders/hangers etc. incl. Demag DK chain hoist 500KG (older) Crane is dismantled and immediately available Various cranes are available Very good condition, see pictures Item location is 75053 Gondelsheim Shipping by freight forwarder or collection only by appointment Demag KBK1 KBK2 and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125KG - 1600KG Please enquire about your crane runway with load capacity and dimensions without obligation.

Condition: new, functionality: fully functional, Year of construction: 2016, lifting height: 12,800 mm, overall weight: 53,000 kg, load capacity: 50,000 kg, lifting speed: 6,400 mm/s, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Two bridge crane runways: 1) 50 t, span 23 m, lifting height 12.8 m 2) 25 t, span 23 m, lifting height 15.0 m 3) 3.2 t maintenance and assembly hoist, lifting height 20 m Itodpfx Asxyyi Nsanjr HBC radio remote control

Condition: good (used), Crane frame 6800 mm This frame for cranes offers you the option of attaching your crane and a trolley, as well as suspended scales or other suspended lifting equipment. A-shaped supports for the necessary stability. Supports: Square tube 80 x 80 mm Double T-beam: 120 x 85 mm Itjdpfxowv Rcns Aanjr Length: approx. 6800 mm Height: approx. 4000 mm Width: 2000 mm Color: Yellow Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. Itsdpfsx D A D Rex Aanor The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany. Ijdpfx Aaex I N Efonjtr

Condition: used, mileage: 82,475 km, power: 235 kW (319.51 HP), first registration: 10/2006, overall weight: 19,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, loading space volume: 10 m³, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, all wheel drive, Large sweeper for airport runways, "BUCHER-SCHÖRLING" body, type: STKF 9500, separate motor for body 205 KW / 279 HP, disc brushes left and right, sweeping width of suction mouth approx. 2,300 mm, sweeping width with disc brush and suction mouth approx. 3,400 mm, water pump with spray hose 10 bar, container 9,500 litres, water tank 1,500 litres, front attachment plate with municipal hydraulics for snow plow or other front attachments, all-wheel drive, Telligent braking system with ABS, differential locks, cruise control, Telligent gearshift, air conditioning, analogue tachograph, roof hatch, outside mirrors heated and electrically adjustable, electric. Window lifter driver and passenger door, driver comfort suspension seat, NATO external start socket, 2 x rotating beacons, raised exhaust, leaf spring suspension, vehicle can be covered with advertising and/or labeled Itsdpevnpftjfx Aaner Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: new, Dimensions (L,W) 1400 x 1750 mm Weight , kg tiltable yes/no ja RUCHSER assembly tilting table RU-MKS 1,4 ----- Universally applicable work table e.g. for frame assembly, roller shutter box assembly, bars, sash fittings, glazing Equipment of machine, alternative / optional equipment on request! Pos. 1.0: Article no .: 8820000 RU-MKS-1,4 assembly tilting table Basic dimensions 1400 x 1750 mm, extended 3400 x 2500 mm Support surface with 3 support bars, 2 of which are adjustable, one permanently mounted on the upper extension, covered with felt. Support surface with width and Height / depth pull-out. Pneumatic tilting device, Payload 130 kg. Actuation via foot valve. Roller conveyor can be folded down manually and pulled out to the side from 1400-2500 mm, roll length 140 mm closed. Roller conveyor height in vertical Table position adjustable from 300-380 mm, Horizontal working height adjustable from 920-970 mm. ! For security reasons, at least one Flat clamping cylinders can also be ordered! Pos. 1.1: Article no .: 5582 Pneumatic swivel device of the roller conveyor for MKS Pos. 1.2: Article no .: 21127 Support beam 1400mm not extendable for RU-MKS Pos. 1.3: Article no .: 5585 360 ° rotating device with pneumatic locking in 180 ° steps Rotary brake with double-sided actuation When using the rotating device, the minimum roller conveyor height of the increases MKS tables on 330mm Pos. 1.4: Article no .: 6455-01 6 pieces of storage boxes with 2 compartments each, swivel mounted; for RU-MKS Itjdpfx Asx H Al Asanjr Pos. 1.5: Article no .: 5597-10 Driving device for semicircular rails for RU-MKS-P4 Actuation via foot valve, mounted on the roller conveyor side. Pos. 1.6: Article no .: 6354-6 3 double meter semicircular runways 30 x 10 mm. Pos. 1.7: Article no .: 5193-1 Flat clamping cylinder with manual valve, clamping range 130 mm, can be hidden attached to the support beam, with felt on the system part, Attachment left or right Please specify. Item 1.8: Article no .: 5584 Lifting device 450 mm for working on the vertical element. Actuation via foot valve. Maximum payload 200 kg for RU-MKS ...- 1.4 and 140 kg for RU-MKS ...- 2. Item 99.1 Packaging on a pallet ----- Total price in this version: on request! See attached video and PDF brochure. (Technical information according to the manufacturer - without guarantee!)

Condition: used, Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Isdex D A Ebopfx Aanstr Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: used, mileage: 85,501 km, power: 235 kW (319.51 HP), first registration: 08/2006, overall weight: 19,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro3, loading space volume: 10 m³, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, all wheel drive, Large sweeper for airport runways, "BUCHER-SCHÖRLING" body, type: STKF 9500, separate motor for body 205 KW / 279 HP, disc brushes left and right, sweeping width of suction mouth approx. 2,300 mm, sweeping width with disc brush and suction mouth approx. 3,400 mm, water pump with spray hose 10 bar, container 9,500 litres, water tank 1,500 litres, front attachment plate with municipal hydraulics for snow plow or other front attachments, all-wheel drive, Telligent braking system with ABS, differential locks, cruise control, Telligent gearshift, air conditioning, analogue tachograph, roof hatch, outside mirrors heated and electrically adjustable, electric. Window lifter driver and passenger door, driver comfort suspension seat, NATO external start socket, 2 x rotating beacons, raised exhaust, leaf spring suspension, vehicle can be covered with advertising and/or labeled Itodpfx Asvnpfysanjr Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: used, Year of construction: 2024, Polygonmach stationary hot mix asphalt plant refers to an asphalt plant that is fixed in one location and produces hot mix asphalt continuously. It is not portable and is typically used for large-scale asphalt production projects. Capacity vary from 60-400 tph. The functions of Polygonmach stationary asphalt plant includes: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are dried and heated in a drum or a dryer to remove moisture and bring them to the desired temperature for proper asphalt mixing. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before mixing with the aggregates. Itodex D A D Depfx Aanjr Mixing: The heated aggregates and asphalt binder are mixed together in the plant to produce the hot mix asphalt. The mixing can be done in a batch or continuous process, depending on the type of plant. Storage and Loadout: The hot mix asphalt is stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Usage areas for Polygonmach stationary asphalt plants include road construction, highway projects, airport runways, parking lots, and other large-scale asphalt paving applications. The operation of Polygonmach stationary asphalt plant typically involves the following steps: Aggregates are stored in the designated bins/silos of the plant. The aggregates are fed into the drying drum, where they are heated and dried. The heated aggregates are then transported to the mixing unit. Options: stationary, continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 60 t/h(37 lb/s)

Condition: used, Year of construction: 1985, Airport snow plane with wind deflector, specially designed for the rapid clearing of snow from runways, taxiways and the airport apron, clearing width approx. 6430 mm (at 32° approx. 5500 mm). Good condition. Iedpfxsvnmqgj Aanotr

Condition: used, Polygonmach drum mix or continuous type hot mix asphalt plant is a type of asphalt plant where the heating and mixing processes occur in a continuous manner within a rotating drum. The functions of a drum mix/continuous type Polygonmach asphalt plant include: Aggregate Storage and Handling: The plant has storage bins or silos to store various sizes of aggregates. These aggregates are sorted and fed into the plant for processing. Drying and Heating: The aggregates are fed into the rotating drum, where they are heated and dried using hot gases. This process removes moisture from the aggregates. Asphalt Binder Storage and Heating: The plant has storage tanks for storing the asphalt binder, which is heated to a specified temperature before being introduced into the drum. Mixing: As the aggregates move through the drum, they come into contact with the hot asphalt binder, resulting in the mixing of the materials to produce hot mix asphalt. Isdpsx Dx Dmsfx Aanjtr Storage and Loadout: The hot mix asphalt is temporarily stored in silos or storage bins until it is ready for loadout onto trucks for transportation to the construction site. Polygonmach drum mix/continuous type asphalt plants are used in various applications, including road construction, highway projects, airport runways, and large-scale paving projects. Options: continuous Capacity: Max.: 400 t/h(245 lb/s)Min.: 40 t/h(24 lb/s)