Used Shaft Furnace for sale (6,818)

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Nedjygw S Aopfx Ahnjlf

Condition: ready for operation (used), Year of construction: 2005, The system consists of two bell furnaces, maximum temperature: 1100°C, annealing chamber: 2x 1000mm, electrical connection: delta, current rating: 433A, connected load: 300kW, equipment: power control, temperature control, process monitoring, safety controller, emergency stop system, motorized drive for bell movement, air conditioning unit, electrical control cabinet, and control system. Inspection on site is possible. Nlsdezhw Sdopfx Ahnof

Year of construction: 2011, condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Nedpeu Nlkxofx Ahnslf

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Nljdetxb Apjpfx Ahnef

Condition: ready for operation (used), Year of construction: 2013, Measuring and evaluation electronics: Rotor Test 505, balancing planes: 1/2, max. rotor weight: 300kg, max. rotor length: 4000mm, max. rotor diameter: 1400mm. Documentation available. An on-site inspection is possible. Nsdpfx Ahjzdkpnsnelf

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Nledstndwuopfx Ahnof

Year of construction: 1997, condition: ready for operation (used), A complete Efco furnace system for the production of tempered safety glass is available. Heating capacity: 814.5kW, max. glass pane dimensions X/Y: 2400mm/4200mm, max. temperature: 750°C, total system length: approx. 25m. Components: loading section, furnace, cooling section, unloading section. Documentation available. An on-site inspection is possible. Nodpfx Aezdum Rshnelf

Year of construction: 2001, condition: ready for operation (used), A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment. Nodpfx Ahozgwyfonslf

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, overall weight: 30,000 kg, rotor length: 3,000 mm, power: 375.1 kW (509.99 HP), Crawler-mounted crushing plant, Neuenhauser TARGO 3000. Nodpezd Srdsfx Ahnolf Equipment, detailed description: see documents.

Condition: used, functionality: unexamined, input voltage: 380 V, The machine (or at least a part of it) is an old coffee pad recycling (CPR-30) machine (see appendix). This shredder and blade assembly was used to tear open paper coffee pads and then separate the pad from the coffee using a vibrating screen located underneath the machine. Nlodpfxjzvfxnj Ahnof Perhaps this machine is also suitable for other materials. Price is per unit.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 4,451 h, functionality: fully functional, machine/vehicle number: W09307330E2D38070, Equipment: AdBlue, Shredder/Crusher Doppstadt DW-3060 SA - Year of manufacture: 11.2014 - Mercedes-Benz internal combustion engine Nljdpjzcwziefx Ahnof - AD Blue - Euro 6 - VIN: W09307330E2D38070 - Machine mounted on a three-axle trailer chassis - Shredding shaft, 3m long, diameter 0.60m - Magnetic separator - Additional hydraulic outlets - Hydraulic drive - Hydraulically extendable support leg with wheels - Ready for operation - VAT invoice available Contact: 607-53-88-55

Condition: excellent (used), Stainless steel lump breaker, double shaft 2 electric motors, 380 volts, 7.5 kW Nlsdpfozu Rrwex Ahnjf feed opening: 1510 x 560 mm

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 1,000 mm, filling opening length: 1,050 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Njdpsznnf Uefx Ahnelf Delivery terms: ex warehouse

Condition: excellent (used), Year of construction: 2022, operating hours: 216 h, functionality: fully functional, overall weight: 1,250 kg, rotor diameter: 260 mm, number of blades: 14, total length: 1,880 mm, total height: 1,670 mm, total width: 1,120 mm, rotor length: 550 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 120 rpm, hopper volume: 400 l, rotational speed (min.): 80 rpm, warranty duration: 3 months, Machine in very good condition. Manufactured in December 2022. Njdpfxszlm T Ej Ahnslf Reuser SD 60, 18.5 kW The single-rotor universal shredder, Robust Reuser SD 600, is a symbol of strength, determination, and uncompromising performance. It operates according to its own rules, but in perfect harmony with your needs. Its minimalist yet distinctive design gives it a touch of timelessness. Advantages: Single-rotor shredder Material feed via excavator, forklift, or hydraulic lifting arm Unitronics® PLC control unit Hydraulic unit with 20 liters of oil

Condition: used, Year of construction: 2009, 3520 kW Operating weight max. 120.000 ca. 55.000 kg Unladen weight of the kiln car ca. 40.000 Usable dimensions 4000x1500x10500 Clear dimensions 5.000 x 2.575 x 11.275 External dimensions 7.100 x 7.245 (mit Türpor 550 – 1.100 °C Max. permissible oven chamber temperature 1.150 Safety cut-off temperature 1.180 Complete System – Industrial Heat Treatment Line with 6 Identical Bogie Hearth Furnaces and Quenching System For sale is a complete industrial heat treatment system consisting of 6 identical bogie hearth furnaces type HW150-3520-1100, including an integrated quenching system and complete central plant equipment. The offered system represents a fully coordinated industrial production solution for demanding thermal processing applications. All six bogie hearth furnaces are of identical design, ensuring consistent process conditions, high operational availability, and excellent interchangeability of components. The complete system includes not only the six high-performance bogie hearth furnaces but also the required central plant components and auxiliary systems, including burner systems, combustion air supply, exhaust gas extraction, temperature control and monitoring systems, as well as the complete furnace and bogie equipment. With a rated heating capacity of 3,520 kW per furnace, an operating temperature range of up to 1,100 °C, and a maximum load capacity of up to 120,000 kg per furnace, this system provides a powerful solution for large-scale industrial heat treatment processes. The combination of six identical furnace units together with the integrated quenching section offers: High production capacity through parallel operation of multiple furnace units Reliable and repeatable heat treatment processes Flexible handling of different charge sizes Centralized and coordinated plant utilities Robust industrial design for continuous production environments The system is offered as a complete turnkey heat treatment solution and provides an immediately deployable production platform for industrial applications requiring high capacity, process reliability, and consistent thermal treatment results. Technical Data 7.1 Furnace Housing Dimensions External dimensions1: 7,100 x 7,245 (incl. door portal) x 12,745 mm Clear dimensions: 5,000 x 2,575 x 11,275 mm Usable dimensions: 4,000 x 1,500 x 10,500 mm Workpiece supports: 6 units, height 475 x 340 mm 7.2 Weights Empty weight of housing: approx. 55,000 kg Empty weight of hearth car: approx. 40,000 kg Operating weight: max. 120,000 kg Weight of supports: 6 units at 5,083 kg each = 30,500 kg 7.3 Performance Data Nominal heating capacity: 3,520 kW Temperature control range: 550 – 1,100°C Max. permissible furnace chamber temperature: 1,150°C Safety cut-off temperature: 1,180°C Heating rate: max. 60 K/h at 120,000 kg operating weight Max. permissible heating rate: 60 K/h Number of temperature control zones: 6 All dimensions: width x height x depth or Ø x height. Utility Supply Parameters 7.4.1 Natural Gas Calorific value Hu(n): 10.6 kWh/m³(n) Gas inlet pressure: 2.0 bar Max. volume flow: 334 m³(n)/h / 118 m³(b)/h Temperature: +5 to +25°C. 7.4.2 Combustion air Composition: Ambient air Combustion air pressure: max. 100 mbar Max. volumetric flow rate: 11,500 m³(n)/h Temperature: +5 to +40°C Nljdezpbmbepfx Ahnof 7.4.3 Power supply Voltage: 400 V Mains frequency: 50 Hz Connected loa...

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Nsdpfx Asztrbwjhnslf

Condition: ready for operation (used), Year of construction: 1977, Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Nljdpfoztrbksx Ahnsf

Condition: used, Year of construction: 2025, operating hours: 650 h, functionality: fully functional, overall weight: 27,000 kg, total length: 10,030 mm, total height: 3,675 mm, total width: 2,540 mm, rotor length: 3,000 mm, power: 405 kW (550.65 HP), ejection height: 4,030 mm, For sale is a PRONAR MRW 1.300 single-rotor pre-shredder (mobile slow-speed machine) in very good condition. Similar design to the legendary DW-3060 "Buffalo". Volvo Penta 405kW/550 hp diesel engine, Stage 5 Rotor with 42 bolted tools; length 3000 mm 3-axle chassis with 27 tons; approved for speeds up to 80 km/h 2 screening baskets Overband magnet Long discharge conveyor; discharge height 4030 mm Nedpfx Aszrd Tishnslf Central lubrication system Wireless remote control Hopper volume 6.4 m³ / hopper dimensions 3650x2200 / hopper discharge height 2870 mm Direct sale by Hannes Schirnhofer - Schirnhofer Wood Chip Production -

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Nlodpowah R Rofx Ahnsf Absolute pressure = 5 bar Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 27.15.494, functionality: fully functional, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, overall weight: 100 kg, Equipment: CE marking, 5M Tandem furnace (inductional) Nlodpfx Ahszqclhsnef

Condition: new, Year of construction: 2026, Model Type: Hammel, Arjes, Lindner, Pronar VB 650 5-7-7 / 6-7-7 / 10-7-7 VB 750 6-7-7 / 5-7-7 / 10-7-7 VB 850 6-8-8 / 8-8-8 / 10-8-8 VB 950 6-8-8 / 10-8-8 / 10-10-10 Nsdpfx Aoztmgujhnjlf AT-TEC Recycling Solutions GmbH is a metal fabrication company specializing in the production of shredding tools for shredder machines, complete with an in-house welding department. Our experienced team takes pride in offering high-quality and customized solutions. We focus on quality, innovation, and customer satisfaction to ensure that our products fully meet the requirements of our customers. Our customers come from various industries, including waste management, recycling companies, and machine manufacturers. We maintain long-term partnerships and are pleased to supply our products and services to companies seeking reliable and high-performance shredding solutions.

Condition: new, Year of construction: 2026, Model Type: Hammel, Arjes, Lindner, Pronar VB 650 5-7-7 / 6-7-7 / 10-7-7 VB 750 6-7-7 / 5-7-7 / 10-7-7 VB 850 6-8-8 / 8-8-8 / 10-8-8 VB 950 6-8-8 / 10-8-8 / 10-10-10 AT-TEC Recycling Solutions GmbH is a metal fabrication company specializing in the production of shredding tools for shredder machines, complete with an in-house welding department. Our experienced team takes pride in offering high-quality and customized solutions. We focus on quality, innovation, and customer satisfaction to ensure that our products fully meet the requirements of our customers. Nsdpfeztmghsx Ahnelf Our customers come from various industries, including waste management, recycling companies, and machine manufacturers. We maintain long-term partnerships and are pleased to supply our products and services to companies seeking reliable and high-performance shredding solutions.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 1,750 kg, rotor diameter: 250 mm, rotor length: 600 mm, power: 30 kW (40.79 HP), Pre-shredder: 1 unit Forrec AE 600/30 single-shaft shredder: - Drive: 30 kW - Dimensions: 2,250 x 3,050 x 1,600 mm - Rotor diameter: ø 250 mm - Hopper dimensions: 1100 x 1000 mm Nsdpfx Ahsztauronjlf - Hopper capacity: 750 liters - Production: 600 kg/hour (mixed cables) - Weight: 1,750 kg - 1 set of original Forrec spare parts Accessories: - Electric lift table for material feeding - Conveyor belt for shredded material discharge - Metal platform for material feeding The machine has been disassembled and is in storage. Therefore, a functional test is not possible. Pickup only in 14727 Premnitz.

Condition: ready for operation (used), functionality: fully functional, Vita ZYrcomat Firing Furnace / Firing Device / Ceramic Furnace High-temperature firing device for the VITA In-Ceram® technology. The VITA ZYrcomat T is a specially developed firing unit for atmospheric high-temperature sintering firings. Atmospheric long-term high-temperature sintering firings for frameworks made of zirconium dioxide and aluminum oxide. Technical Data Dimensions: Firing device: W × H × D = 360 × 810 × 490 mm Power unit: W × H × D = 500 × 210 × 350 mm Weight: Firing device: 32 kg Housing with power unit: 27.5 kg Nledpfxexgb Nqe Ahnef Firing chamber (useable space): Diameter: 84 mm Height: 90 mm Firing chamber temperature: max. 1600 °C Electrical Data Electrical connection: 230 V AC, 50 Hz Power consumption: max. 1500 W Classification: Protection class 1 Good working condition. Please chech out out other listings as well.

Condition: new, Year of construction: 2026, The CORMAK PT410S planer-thicknesser with a spiral cutterhead is a professional industrial-class woodworking machine that combines the functions of a jointer and a thickness planer in one compact design. Equipped with a modern spiral cutterhead, it ensures maximum machining precision, exceptional surface quality, and quiet operation. It is an excellent choice for woodworking shops, furniture production, and workshops that value efficiency, accuracy, and reliability. Key advantages of the CORMAK PT410S planer-thicknesser Spiral cutterhead – minimizes noise, reduces cutting resistance, and allows for a perfect wood surface finish, even with difficult species. Quick function change – rapid transition from jointer to thickness planer thanks to separately opening tables and dust extraction cover. Stable construction – heavy cast iron frame and tables ensure rigidity and reduce vibrations during operation. Precise adjustment – clear scale and accurate mechanism for setting planing depth and fence angle. High performance – a motor with power up to 4.0 kW (S6 duty) ensures smooth and efficient machining even of wide workpieces. Construction and technology The CORMAK PT410QS model is designed for long-term, intensive use. Its cast iron jointer tables provide excellent flatness and stability of the workpiece, while the centrally mounted thicknesser table ensures even lifting. The tilting aluminum fence with a precise scale allows angle adjustment from 90° to 45° for proper material guidance. Precision and performance Thanks to the spiral cutterhead with a diameter of 95 mm and spindle speed of 4300 rpm, the thicknesser ensures an even, smooth surface even when working with hard or resinous wood. The feed is smooth, without vibration or risk of tear-out. Planing height adjustment up to 220 mm allows machining of large elements—both solid wood and glued panels. Applications The CORMAK PT410S jointer-planer is ideal for: woodworking and furniture production shops, craft workshops, stair and wooden component production, processing of solid wood and glued panels. This machine is designed for demanding users who are looking for a precise and reliable planer-thicknesser. Standard equipment: cast iron jointer tables, spiral cutterhead, cutterhead guard, dust extraction outlet, feed switch, emergency stop switch. Optional equipment: transport trolley, knife setting jig, mortising attachment. Njdpfoyy Nl Njx Ahnslf Technical specifications Jointer table size: 1680 × 410 mm Thicknesser table size: 750 × 410 mm Cutterhead diameter: 95 mm Spindle speed: 4300 rpm Fence tilt angle: 90–45° Dust outlet: 100 mm Max thicknessing height: 220 mm Motor power: 4.0 kW / 400V Max workpiece width: 410 mm Dimensions: 1680 × 1100 × 1100 mm Weight: 360 kg