Used Short Bed Lathe for sale (11,745)

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Njdpfx Ajycpwpodwjkt Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: good (used), Year of construction: 2001, functionality: fully functional, cam-controlled Nkedeydddaspfx Adwet

Condition: excellent (used), Year of construction: 2012, ONLY 8,300 spindle hours! Control: TX 8 i-p MAIN SPINDLE Max. bar capacity: 32 mm Max. workpiece length - Swiss-type operation: 245 mm - Short turning operation: 125 mm Max. spindle speed: 6,400 rpm C-axis SUB SPINDLE Max. bar capacity: 32 mm Max. clamping depth of workpiece: 250 mm Max. spindle speed: 6,000 rpm C-axis UPPER TOOL TURRET Number of stations: 10 All driven Max. speed: 12,000 rpm Nkodpfx Aexrf Etjdwst LOWER TOOL TURRET Number of stations: 9 All driven Max. speed: 12,000 rpm BACK WORKING UNIT Number of stations: 8 Driven stations: 3 (T12, 13 and 14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist filter Bar loader FMB turbo 3-36

Condition: used, turning diameter 256 mm turning length 483 mm greates pass round over bed 548 mm swing diameter over slide rest 320 mm length between centers 584 mm x-axis 203 mm z-axis 508 mm Nkjdeycxkljpfx Adwet spindle tunring speed 4.800 U/min number of tool places 10 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Fanuc control, pick-off spindle, driven tools, loading magazine, chip conveyor, immediately available Nksdpjyc Nnbefx Adwst

Condition: new, Year of construction: 2026, operating hours: 5 h, functionality: fully functional, workpiece weight (max.): 12,000 kg, travel distance X-axis: 1,900 mm, travel distance Z-axis: 1,400 mm, spindle motor power: 1,00,000 W, spindle speed (min.): 60 rpm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, turning diameter over cross slide: 2,200 mm, turning diameter: 2,200 mm, total height: 2,000 mm, feed rate X-axis: 8 m/min, Equipment: rotational speed infinitely variable, Machine Fresh from production Nkedevc Ei Repfx Adwot Test and quaility controlled next 6 weeks Manufacturing year 2025 WAIT FOR OFFERS

Condition: excellent (used), Year of construction: 2019, CNC Lathe TAKAMAZ XY120PLUS Japan Nkjdpfex Sxl Aex Adwst Year of manufacture: 2019 - Control system: Fanuc Oi-TD - Machining hours: 3,600 hours - Functionality: fully operational Axes: - X1 axis (150 mm) - Z1 axis (330 mm) - Y1 axis (+/- 35 mm) - Main turret: 24-tool stations with driven tools - C1 axis Sub-spindle: - X2 axis (150 mm) - Z2 axis (440 mm) - C2 axis - Small turret with 12-tool stations Machining capacity: - Max. turning diameter: Main 170 mm / sub 135 mm - Max. turning length: 330 mm - Bar capacity: Main Ø52 mm / sub Ø20 mm - Spindle speed: up to 5,000 rpm - Sub-spindle speed: up to 5,000 rpm - Automatic parts catcher with parts conveyor belt - Chip conveyor (tube type) - Machine documentation - Driven tool holders: 6 pcs (3/3) - Interface for bar feeder - Dimensions (L x W x H): 2,630 x 1,950 x 1,730 mm - Machine weight: 4,500 kg

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Njdpfx Aeydaadodwokt Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm Nkodpfx Adsycuh Hjwjt turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Nkodpfx Adsycuhmswet Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) Nsdpfoycufljx Adwokt COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a lightly used Drechselmeister Stratos FU 230 woodturning lathe with a center distance of 680 mm and a 2 HP motor. The demonstration machine is in very good condition. Technical Specifications - Center height: 230 mm - Swing diameter: 455 mm (up to 800 mm with optional outboard turning attachment!) - Center distance: approx. 680 mm (extendable!) Nsdeyaphvepfx Adwskt - Spindle mount: M33 x 3.5 (hardened) with ASR (Euro) anti-release groove* - Spindle and tailstock taper: MT2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (connection 230 V) - Weight: 178 kg The machine is located in A-5431 Kuchl and can be viewed at any time during our business hours. Subject to prior sale! Related search terms: woodturning lathe, lathe, turning machine, turning bench, turning tools, woodturning, turning, machine Reference: R-A0117

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale: a used Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The demonstration machine is in very good condition. Technical data: - Center height: 280 mm - Swing over bed: 550 mm (up to 1,000 mm with optional bed extension / outboard turning device!) - Distance between centers: approx. 780 mm (expandable!) - Spindle thread: M33 x 3.5 with ASR (Euro) anti-rotation groove* - Headstock and tailstock with Morse taper MK2 - Frequency inverter (3 belt speeds): - Speed 1: 60 – 1,200 rpm - Speed 2: 100 – 2,200 rpm - Speed 3: 150 – 3,700 rpm - Quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor: 3 HP Njdpfx Aoyapc Hsdwokt - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, spindle turning, turning, machine Reference: R-A0117

Condition: used, turning diameter 240 mm turning length 530 mm control Siemens 840D SL swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min Nkodpfx Adeycxibowet 12 Stk. total power requirement --- kW weight of the machine ca. 6,1 t

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, CNC Lathe - Horizontal / Brand: GEMINIS / Type: GEMINIS GT9 G2 (heavy series) / Year of construction: 2015 The machine can be inspected by appointment under power. TECHNICAL DATA: - Max swing over bed: 2.000 mm Njdpevuih Uefx Adwekt - Distance between centers: 8.000 mm - Height of centres: 1.050 mm - Swing over slide: 1.600 mm - Main spindle bore Ø: 150 mm - Main spindle nose: DIN 55026-15 - Speed range: 4 - Speed range I: 0-80 rpm - Speed range II: 0-175 rpm - Speed range III: 0-350 rpm - Speed range IV: 0-700 rpm - Cross slide travel: 1.060 mm - Quill Ø: 400 mm - Quill travel: 300 mm - Max. weight allowed between centers: 30 tons Machine base: - Distance between the guideways: 1.350 mm - Height of the machine base: 650 mm EQUIPMENT / ACCESSORIES: - CNC-Control: FAGOR 8065 - Independent 4-jaw chuck: Ø 1.600 mm - Set of hard inner and outer claws - Square automatic turret: SAUTER 4 pos – Ø 320 x 320 mm - Tailstock and quill: Motorised - Quill placement: Built-in Rotating - Automatic Locking/Unlocking of the tailstock body - Air conditioner for electronic cabinet - Portable electronic handwheel - Chip conveyor - 4-support Closed steady rest: Ø 500-900 mm - Permissible weight allowed for steady rest: 10 tons - Prepared for C-axis with transmission from main engine - Preparation for subsequent adaptation of a milling head with Y axis on turret - Preparation for rectifier head assembly - Very well-equipped with tools Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Nsdpfx Adjt Akirswjkt Swing over bad mm: ø 920 Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Number of tool slots St: 12 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: new, The DL E Heavy 620/5000 is a remarkable addition to the Conventional Horizontal Lathes category, specifically designed for Heavy-duty Lathes, offering unparalleled precision and robust power. This lathe can handle large turning diameters and workpiece lengths up to 8000 mm and over 1600 mm in diameter. Equipped with a powerful 22 kW motor, it boasts a heavy-duty cast-iron body that minimizes vibrations, ensuring a stable machining experience. The machine's induction-hardened and ground guideways contribute to its longevity and accuracy. With features such as a joystick control for easy X and Z feeds, a motorized tailstock, and a complete 3-axis position indicator, users benefit from enhanced productivity and efficiency. The large spindle bore of 130 mm and rapid feeds in both directions make it an excellent choice for demanding machining tasks. You can elevate your machining capabilities with the DL E Heavy 620/5000 – order online today to experience the KNUTH difference in Heavy-duty Lathes! Nkodpfx Adoww T Txjwet

Condition: new, The Basic 180 V is a robust Conventional Horizontal Lathe that stands out in the Metal Lathes group, known for its exceptional stability and performance. Designed with a heavy cast-iron bed and a significant bed width of 206 mm (8 in), this lathe offers a solid foundation for high-quality machining. Its advanced features, including an inverter that achieves up to 3,000 revolutions per minute, and a constant cutting speed function, ensure smooth operations that match the quality of a CNC lathe, even during heavier machining tasks. With a large turning diameter of 356 mm and a center width of 1,000 mm, it can accommodate various applications, making it an ideal choice for industrial requirements. The Basic 180 V includes comprehensive standard equipment such as a 3-axis position indicator and a coolant system. You can trust KNUTH for precision-engineered tools; request a quote today to explore how the Basic 180 V can enhance your machining capabilities in the Conventional Horizontal Lathes category. Nsdpjuzlbusfx Adwjkt

Condition: new, The Sinus 400/1500 D, a top-tier model in the Conventional Horizontal Lathes category and part of the Engine Lathes product group, exemplifies robust engineering and innovative design. KNUTH has crafted this universal lathe with a sturdy one-piece cast machine bed, ensuring high accuracy and low-noise operation even at elevated cutting power. The lathe features a removable bridge allowing machining of large parts with diameters up to 1035 mm, alongside rapid feed capabilities across two axes for swift positioning. Additional highlights such as its manual multi-disc clutch, hardened guideways, and well-designed safety functions further enhance its performance and reliability in various machining applications. This Engine Lathe is equipped with essential accessories like a 3-axis position indicator and a comprehensive toolset for operator convenience. For those looking for a high-performance lathe capable of handling demanding tasks, the Sinus 400/1500 D is the optimal choice – request a quote today! Nkjdpfxjq Rdp Ae Adwjt

Condition: new, The Meisterturn 400 V is a state-of-the-art conventional horizontal lathe designed for precision machining in the realm of engine lathes. This machine ensures high accuracy in single parts and small batch production, making it ideal for tool and mold construction, as well as training applications. Equipped with features like an infinitely variable spindle speed reaching up to 2,500 rpm and an integrated constant cutting speed function, the Meisterturn provides optimal performance during face turning, comparable to CNC capabilities. Its robust design includes a heavy cast-iron bed with dual v-guides, a high-capacity spindle for efficient clamping, and safety features such as electromagnetic brakes and an enclosed oil bath for gears. With an ergonomic machine enclosure, user-friendly control panel, and an extensive equipment package including a 3-jaw chuck and cooling system, the Meisterturn is perfectly tailored for demanding production environments. You can request a quote for this exceptional engine lathe today. Nedpjqzhhljfx Adwjkt

Condition: new, The Servoturn 500/1000, a remarkable addition to the Conventional Horizontal Lathes category, exemplifies the innovative approach of KNUTH in the Servo-conventional Lathes group. This machine integrates cutting-edge feed technology with the reliability of traditional engineering. Its electronic hand wheels and ball screw drives enhance precision, enabling high-torque servo motors to execute feed movements with unrivaled dynamics, surpassing standard lathe capabilities. The user-friendly interface allows operators to select feed and thread pitches effortlessly, while the rapid traverses minimize downtime, ensuring high productivity. A robust machine frame and heavy-duty tailstock guarantee stability and performance, making it suitable for heavier materials. The Servoturn 500's standard equipment includes a quick-change tool holder, a 3-axis position indicator, and a reliable coolant system. Experience unparalleled turning with this advanced machine. To learn more, request a quote today and elevate your machining capabilities with the Servoturn 500/1000, a stellar choice in the Servo-conventional Lathe market. Nkedpfxjl Iy Sis Adwot

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW Nedpfxeu Sbkgs Adwjkt spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1981, faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW weight of the machine ca. 70 t dimensions of the machine ca. 9,3 x 6,1 x 6,0 m Nsdpfju Sbdgsx Adwjkt machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Storage location: Nattheim Nodevvkt Ispfx Adwjkt

Condition: good (used), Year of construction: 2005, turning length: 450 mm, travel distance X-axis: 135 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 450 mm, C-Axis rapid traverve 400 Min Turret indecing time 0,2 sec for 1 station Heavy duty cutting (depth cut 6mm) 162.7 mL/Min LNS Bar feeder new 2017 Large package tooling driven / live tools 8 axis controlled with 2 spindles and turrets Nedpfxjydcvze Adwokt Max. turning Ø: 250mm X-Axis: 135mm Y-Axis: 40+40 = 80mm Z-Axis: 450mm B Axis: 510° Spindle bore: 49mm Speedrange: 6000Rpm Spindle power: 30kW Subspindle speeds: 6000Rpm Subspindle bore: 49mm ATC / revolver: 12 Speed live tools: 6000Rpm Positions lower revolver:12 Speed live tools: 6000Rpm Length: 2800mm Width: 2000mm Height: 2000mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!