Used Side Milling Cutter for sale (31,558)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, spindle diameter: 128 mm, spindle speed (max.): 3,500 rpm, table length: 850 mm, table width: 850 mm, feed length X-axis: 1,600 mm, feed length Y-axis: 920 mm, feed length Z-axis: 950 mm, workpiece weight (max.): 5,000 kg, year of last overhaul: 2024, WFQ80CNC, Overhaul 2008 | 3.0585A ■ T-TYPE HORIZONTAL BORING MILL ■ PRODUCER: TOS VARNSDORF ■ OVERHAUL YEAR: 2008 (RETOS) ■ CONDITION: USED, EXCELLENT ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ Heidenhain TNC426 control system with handwheel HR410 ■ SIEMENS motors and drives ■ operator housing against swarf and water ■ magnetic swarf conveying system SCOPE OF REPAIR 2024 ■ cleaning, revision and technical inspection ■ replacement of Heidenhain TNC426 control system ■ refurbish of electrical cabinet ■ exchange of damaged cables ■ repair of control panel ■ complete machine geometry repair (geometric accuracy protocol on request) ■ revision of drives (new ball screw bearings X+Z) ■ revision of headstock Bsdoztqq Dopfx Abtjwt ■ revision of hydraulic power pac ■ revision of lubrication and clamping ■ new telescopic covers

Condition: excellent (used), Catalog number: 6368 TECHNICAL DATA - max. width of the workpiece: 230mm - max. height of the workpiece: 130mm 7 spindles: 1) horizontal, lower: 230mm, 5.5kW 2) vertical, right: 130mm, 5.5kW Bwsdpfx Ajztzgiobtjt 3) vertical, left: 130mm, 5.5kW 4) horizontal, upper: 230mm, 7.5kW 5) horizontal, upper: 230mm, 11kW 6) horizontal, lower: 230mm, 18.5kW 7) universal: 230mm, adjustable at an angle of 360 degrees, 5.5kW - all spindles adjustable up/down, left/right - all spindles equipped with an electric brake - spindle diameter: 40mm - spindles 4 and 5 adjustable electrically up/down - top: 8 feed rollers, metal, twisting, including 2 double rollers - top: 4 feed rollers, rubber - top: 2 pressure rollers - bottom: pawls - bottom, side: 3 pressure rollers - bottom: 2 metal feed rollers, smooth - bottom: 2 double feed rollers, rubber - rollers are pneumatically pressed - feed on Cardan shafts - stepless feed speed adjustment: 5-36 m/min - feed motor: 4kW - electric adjustment of planing thickness: 0.75kW - length of the infeed table: 1980mm - enclosed in a cabinet - central lubrication of the table - dust extraction port diameters: 5x120mm, 2x150mm - dimensions (L/W/H): 5500x1840x1900mm - weight: approx. 5000kg ADVANTAGES - Made in Italy - With 7 heads - For wet and dry wood - Last spindle is universal - Unpainted - Used planer, very good condition Net price: 116,900 PLN Net price: 27,830 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), Catalog number 6338 TECHNICAL DATA - Max. width of workpiece: 230mm - Max. height of workpiece: 160mm 7 spindles: 1) Horizontal, lower: 230mm, 5.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Horizontal, upper: 230mm, 7.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, lower: 230mm, 7.5kW 7) Universal: 360°, 230mm, 7.5kW - All spindles are adjustable up/down, left/right - Spindle diameter: 40mm - All spindles are equipped with a brake - Spindle speed: 6000 rpm Top: - 6 toothed, metal feed rollers, including 2 double rollers - 4 toothed, rubber feed rollers, including 1 double roller - 3 pressure rollers at the outfeed Bottom: - Side pressure roller at the infeed - Toothed, feed roller, swiveling, in the lower table - 3 smooth, metal feed rollers - Rollers are pneumatically adjustable - Length of infeed table: 1190mm - Central lubrication of the table - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth adjustment of feed speed on a frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed via Cardan shafts - Enclosed in a cabinet - Diameter of dust extraction nozzle: 7x125mm - Dimensions (L/W/H): 5100x2070x1900mm - Weight: approximately 5000kg Bwsdpfjztzgpox Abtst ADVANTAGES – Equipped with 7 heads – Universal spindle – Ideal for both wet and dry wood – Spindles equipped with brakes - DTR documentation – Used planer, very good condition Net price: 115900 PLN Net price: 27595 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Weinig Unimat 3000 Brillant automatic planing and moulding machine. Computer-controlled ProfiCenter for planing and profiling work, featuring CNC-controlled spindles and a Weinig EM11 feed magazine. The control panel was fitted with the latest Simatic Panel PC677C-15" in 2021. The machine is being sold on behalf of the customer from our premises. Viewings can be arranged at any time by prior arrangement. Bwedpfx Ajzrx Dcebtot Technical data: - Spindles: 8 - Spindle 1: Bottom / HSK Powerlock / 12,000 rpm - Spindle 2: Right / HSK Powerlock / 4,000 – 12,000 rpm - Spindle 3: Left / HSK Powerlock / 4,000 – 12,000 rpm - Spindle 4: Right / HSK Powerlock / 4,000 – 12,000 rpm - Spindle 5: Top / HSK Powerlock / 4,000 – 12,000 rpm - Spindle 6: Bottom / HSK Powerlock / 4,000 – 12,000 rpm - Spindle 7: Top / HSK Powerlock / 4,000 – 12,000 rpm - Spindle 8: Bottom / HSK Powerlock / 4,000 – 12,000 rpm - Working width: 230 mm - Working height: 160 mm - All spindles: CNC-controlled (except spindles 6 & 8) - Feed rate: 5.5 kW / 6–36 m/min - Upgrade: Logocom conversion to Simatic Panel PC677C-15"

Condition: used, Year of construction: 1988, Bed milling machine Manufacturer: Correa Type: A16 Bedpfxjzt U T Ae Abtjwt Year of manufacture: 1988 Control system: HEIDENHAIN TNC415 Travel distances X/Y/Z: 1,800 x 800 x 800 mm Clamping surface: 2,000 x 630 mm Workpiece weight: 3,000 kg Operating hours: 12,103 Power: 19 kW Spindle type: ISO 50 Dimensions L/W/H: 4,886 x 2,720 x 2,500 mm Machine weight: 7,500 kg 13826

Condition: new, Technical specifications: Number of rollers: 4 Roller size: 120 x 60 mm Bsdpfx Aozvm Rrebtswt Number of speeds: 4 Feed speed: 4-8-11-22 m/min Max. stroke: 20 mm Distance between rollers: 133-143-145 mm Distance between the first and last roller: 421 mm Motor power: 0.75 kW Motor speed: 1400/2800 rpm.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 820 mm turning length 6000 mm control Siemens Si 840 D sl max. workpiece weight between centres 4000 kg total power requirement 155 kW weight of the machine ca. 65 t dimensions of the machine ca. 16350 x 3700 x 3850 m Additional information Original purchase price in 2019: EUR 1.550.000,- Time recording from Feb. 2025 Operating hours = 38601 h Main spindle = 1958 h Milling spindle = 1760 h CNC control Si 840D sl Working area 6000 mm Working height 1390 mm Swing diameter over bed slide/bed 820 mm X-axis travel +850 -25 mm Z-axis travel 6820 mm C-axis, smallest increment +/-0.001° Workpiece spindle Spindle head according to DIN 55026 A15 Bathing through 160 mm Front diameter Bearing 240mm 2-stage gearbox, infinitely variable programmable Bodpfx Aezuygdjbtjwt Drive power at 100/60% duty cycle: 78/87kW Speed ranges: 2 Speed range I: 10-501 rpm Speed range II: 10-1750 rpm Torque I, 60% duty cycle: 8000 Nm Torque II, 60% duty cycle: 2308 Nm C-axis Holding torque with backlash-free spindle brake: 3000 Nm Speed: 0-50 rpm Maximum torque (100/60% duty cycle): 3700/4430 Nm Steady rest clamping range: 70-425 mm Turning, drilling, milling head Tool taper Capto C8 Tool magazine Storage locations: 2 magazines, Baluff chip system Max. tool diameter (each position/every 2nd position) 125/200mm Max. tool length 600mm Tool weight 25kg Tailstock Quick diameter 180mm Stroke 170mm Internal taper MK6 Axially force, manually adjustable 5-30 kN Quick tip height adjustment +/-0.15mm Other: Collision monitoring sensor ACS 3-ARTIS Chip conveyor system Coolant system 980l tank and more

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine Bsdjzuykvopfx Abtswt 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: used, Year of construction: 2010, - Application of release agent, top/bottom - Joint milling unit - Gluing unit - Trimming unit - Copy milling unit SKF-L - Profile trimming blade unit - Spray cleaning agent - Self-adjusting trimming blade unit - Buffing unit Single-sided edge banding machine Manufacturer: IMA Type: Advantage 310 Year of construction: 2010 Technical data Workpiece - Workpiece length: min. 150 mm - Workpiece width: min. 65* / 150 mm *at a max. workpiece thickness of 25 mm - Workpiece thickness: min. 8 mm, 12 mm with profile trimming blades max. 40 mm (with MFA 08.346), 60 mm (with SKF) - Smallest workpiece: 65 x 300 / 150 x 150 x 19 mm - Machining allowance per workpiece edge: 0 - 5 mm (observe max. chip cross-section) - Workpiece shape: right-angled - Material: chipboard, MDF - Surface material: direct coating (melamine resin paper), paper, film, veneer Edge material - Roll material without film: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm - max. edge cross-section: 150 - 180 mm² - Cut edge strips: Strips: 3.0 - 8.0 mm - max. strip cross-section: 520 mm² - Edge height: min. 12 mm, max. 65 mm - max. upper edge overhang: 2 mm - Edge profiles Bsdpfszuyp Ejx Abtjwt Paper edge: approx. 0.4 mm, chamfer 15 Plastic edge up to 3.0 mm, radius depending on the tool Strip up to 8 mm flush milling (with interchangeable motor on MFA) Machine - Constant workpiece projection from the chain track: 35 mm + edge thickness - max. trimming cross-section 520 mm² - Throughput width: min. 65 mm (with projection of 35 mm) - min. workpiece length in feed direction: 150 mm - Overall height (top edge of chain track): 940 mm - Unit side: on the left in feed direction - Pneumatic connection: approx. 7 - 8 bar Application of release agent, top/bottom Joint milling unit 08.379 and blowing nozzle - with 2 motors, each 4 kW, 9000 RPM, 150 Hz Gluing unit 283.1513 with oil bath gearbox - Adhesive output 0.8 l, 60 mm high, with quick-lock system - can be used for hot melt adhesive or PU adhesive - with single roll / strip magazine, roll diameter 800 mm - with 3 main pressure rollers and 3 counter pressure rollers Trimming unit 08.415 - pneumatically swiveling to 0 or 8 degrees - with 2 motors 660 kW, 400 V, 200 Hz, 12000 RPM - 2 HM trimming saw blades 160 x 3.5 x 22, Z=36 Copy milling unit SKF-L - with 2 motors 180 W, 400 V, 200 Hz, 12000 RPM - and 2 motors 400 W, 400 V, 200 Hz, 12000 RPM - 1 set of DP profile milling cutter I 80x12xHSK25-R, Z = 4, with HSK25 shank - Profile length in the feed direction: max. approx. 50 mm - Workpiece thickness: max. 60 mm - Working speed: max. approx. 20 m/min - Distance between 2 workpieces: min. approx. 400 mm - min. workpiece projection = 35 mm + profile depth Profile trimming blade unit 08.519 - For finishing a top and bottom milled quarter-circle profile Spray cleaning agent Self-adjusting trimming blade unit 08.521 - for removing hot melt adhesive residue from the edge area of the top and bottom of the workpiece Buffing unit 08.617-2 - with an upper and lower motor: 180 W, 50 Hz, 1400 RPM - 2 polishing pads 50 x 160 x 19 mm

Condition: used, Year of construction: 2010, - Release agent application, top and bottom - Scoring saw with 2.2 kW motor - Trimming unit with 8.0 kW motor - Double milling unit with 2 motors, each 4.5 kW - Gluing unit - End trimming unit - Flush trimming unit - Multi-function unit - Multi-profile edge trimming unit - Spray nozzles, top and bottom - Flat edge trimming unit - Buffing unit - Grooving unit Double-sided edge banding machine Manufacturer: IMA Type: Combima/II/390/B/L12 Year of manufacture: 2010 For longitudinal and transverse feed - 2 low-maintenance precision roller chains with 75 mm wide and 85 mm long, rubber-coated chain plates, with cams - Spacing 1080 mm. Pneumatically adjustable to heights of 8, 16 or 24 mm. ICOS OPEN control system - Max. feed width 3,300 mm - Program-controlled master + slave width adjustment - Fixed stop on the left in feed direction Workpiece dimensions - Min. feed width 244 mm (for longitudinal processing) - Max. workpiece width (chain extension) 1,300 mm - Min. workpiece thickness 8 mm - Max. workpiece thickness 45 mm (with copying function) / 60 mm (without copying) Edge material: - Min. height 14 mm, max. height 65 mm - Roll material min. thickness 0.3 mm, max. thickness 3 mm Strips and edgebanding: - Min. thickness 0.8 mm, max. thickness 12 mm Feed speed - 10 - 50 m/min. with frequency-controlled drive. Infeed device - with 5 top-mounted, inclined and driven rollers. Center support with roller track - automatically lowerable and automatically centering. Equipped on each side with: Release agent application, top and bottom Scoring saw with 2.2 kW motor, 100 Hz, 6,000 RPM, pneumatically controlled. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Trimming unit with 8.0 kW motor, 100 Hz, 6,000 RPM. - Electronic positioning for stepless horizontal adjustment. Double milling unit with 2 motors, each 4.5 kW, 150 Hz, 9,000 RPM. - Electronic positioning for stepless horizontal adjustment. - Vertical adjustment manually with mechanical display. Gluing unit for hot melt adhesive - With single roll/edgebanding magazine for roll material up to 3 mm and edgebanding up to 12 mm - 2-fold roll magazine for roll materials up to 3 mm (can be attached to the single roll magazine) - Horizontal roll holder Bwodpfxozuyqio Abtjt End trimming unit - Mounted on the upper pressure beam, with 2 motors, each 660 W, 200 Hz - Pneumatic swivel 0 + 25 for straight and miter cuts. - Automatic adjustment for miter cuts with two different edge thicknesses (e.g. 0.4 and 1.2 mm) and for "edge overhang" for copying with edge thickness 1.0 - 3.0 mm. Automatic adjustment to the feed speed 20+30 m/min. Flush trimming unit 08.0555 - With 2 motors 1,850 W, 200 Hz, 12,000 RPM. Multi-function unit 08.353 - NC controlled with 2 motors, with automatic tooling for 4 profiles. Multi-profile edge trimming unit - with automatic tooling for 4 profiles via fixed-point control Spray nozzles, top and bottom - for applying cleaning agents Flat edge trimming unit Buffing unit - With 2 motors, each 180 W, 50 Hz, 1400 RPM. 1 Grooving unit - With 4.5 kW motor, 150 Hz, 9,000 RPM. - Horizontal and vertical adjustment manually with mechanical digital display - Pneumatic activation control - Manual swivel 90 ICOS open - PC-based control system with integrated PLC and electronic path control. - User-friendly interface with Windows standards - Simple, component-oriented

Condition: used, Year of construction: 2012, - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit Film cutter Manufacturer: HSM Maschinentechnik Type: ABW - ROTA - 2200 Bedpfxjzuy Aro Abtewt Year of manufacture: 2012 Technical data - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2007, Technical details: spindle diameter: 160 mm x-travel: 6500 mm y-travel: 3000 mm W-axis (spindle longitudinal): 1000 mm dimension of the ram: 400 x 420 mm ram stroke: 1000 mm bore spindle turning speed range: 1 - 2000 U/min spindle taper ISO: 50 feed speeds: 2 - 6000 - 8000 mm/min rapid speed: 8/10 m/min total power requirement: 100 kW weight of the machine ca.: 76 t dimensions of the machine ca.: 12 x 4 x 7,5 ( 5,4 ü.F. ) m with CNC Steuerung HEIDENHAIN iTNC 530 autom. toolchanger 40-pockets autom. Pickup Station for universal milling head, and facing head rotary table 2500 x 2500 mm , max load 25 to. 1500 mm longitudinal movement floor plate 4000 x 2000 mm measuring probe, chip conveyor and coolant attachment * Bodpfxszuy Sgo Abtswt

Condition: used, Year of construction: 1998, Four-sided planing machine Bedpfx Abjzuzfustowt Manufacturer: Weinig Type: P 23 E Year of manufacture: 1998 Technical data - Working width: 230 mm - Working height: 8-120 mm - Number of spindles: 5 (top, right, left, bottom, top) - Spindle speed: 6000 rpm - Feed rate: 5-24 m/min - Total connected power: approx. 25 kW - Infeed table: approx. 2000 mm - Weight: approx. 2500 kg Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 20 h, load capacity: 3,000 kg, lifting height: 5,550 mm, free lift: 1,600 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,450 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,750 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 – 10.5, rear tire type: cushion tires (black), rear tire size: 22 x 10 x 16, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, adjustable boom, all wheel drive, fork extension, front guard, full service history, head guard, lighting, pallet forks, sideshift, COMBILIFT CB3000 – 2025 – 6 MTH – DIESEL – TRIPLEX 5,500 mm – FORK POSITIONER – SIDE SHIFT – FULL FREE LIFT 🟢 PURCHASE OR RENTAL AVAILABLE Used and new forklifts with quality guarantee – FT LOGISTICS 🔧 Ready for operation. No compromises. This COMBILIFT CB3000 is more than just a machine — it is the assurance that your logistics will run smoothly, reliably, and without downtime. Engineered for the toughest applications and after complete technical and visual reconditioning, this truck presents as new and is immediately ready for use. 🔍 Key technical details: 📅 Year of manufacture: 2025 ⏱ Operating hours (MTH): 6 ⛽ Drive: Diesel 🏋️ Rated capacity: 3,000 kg 📐 Mast: Triplex – 5,500 mm lifting height 🔄 Fork positioner: 1,750 mm | Forks: 1,200 mm 🛞 Tyres: Solid (100%) ✅ Condition: 5/5 – NEW 📏 Height: 2,250 mm | Length: 1,550 mm | Width: 1,500 mm 📦 Overall height: 2,450 mm 🛞 Tyres: Solid – Front axle 16 x 7 – 10.5 | Rear axle 22 x 10 x 16 ❄️🔥 Fully enclosed heated cab ⚖️ Machine weight: 6,500 kg 🎯 Load centre: 600 mm ⬆️ Free lift: 1,520 mm 🏭 Ideal for: - Narrow-aisle warehouses Bodpezvwkiefx Abtowt - Timber, steel, and pipe industry - Handling long loads - Indoor and outdoor operations

Condition: used, Cutters for the professional, machine-based machining of solid wood, wood-based materials and other suitable materials. Technical data: - Blade: WP Z8 V8 - Flight circle (ø): 220 mm - Bore: 70 mm - Length: 14 mm - Material: steel Bedpfx Abjzva Spetswt

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 11,028 h, load capacity: 5,000 kg, lifting height: 6,300 mm, free lift: 1,800 mm, load center: 700 mm, fuel type: diesel, mast type: triplex, construction height: 2,950 mm, motor manufacturer: VW, gearing type: hydrostat, fork carriage width: 1,300 mm, fork length: 1,600 mm, fork width: 180 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), front tire size: 250-15, rear tire type: pneumatic tires (air-filled), rear tire size: 250-15, overall weight: 13,750 kg, empty load weight: 5,000 kg, total height: 2,600 mm, total length: 4,400 mm, total width: 2,400 mm, color: grey, Equipment: CE marking, adjustable boom, cabin, lighting, pallet forks, sideshift, SIDELOADER FORKLIFT – HUBTEX S50D – 2008 | 11,028 MTH | DIESEL | TRIPLEX 6300 mm | Platform 1600 mm 🚀 Ready to work from day one – no investment, no risk 🔍 Why this machine? Looking for equipment that won’t interrupt your workflow? This HUBTEX S50D is a proven solution after a full technical service—get in and start working. No hidden costs. ✔ Fully serviced (oil and filter change, complete inspection of all assemblies) ✔ Technical and visual condition: as new ✨ ✔ Only 11,028 operating hours – truly low mileage ✔ New tires – no further investment needed ⚙️ Key Specifications Capacity: 5,000 kg Drive: Diesel ⛽ Mast: Triplex – 6,300 mm lift Fork positioner: 1,300 mm Fork length: 1,600 mm Cabin: Full / heated 🔥 Platform: 1,600 mm 📊 Full technical specification General Data: - Year of manufacture: 2008 - Operating hours: 11,028 MTH - Load capacity: 5,000 kg - Load center: 700 mm - Machine weight: 8,750 kg Mast and Lifting: - Mast type: Triplex - Lift height: 6,300 mm Forks and Attachments: - Fork positioner: 1,300 mm - Forks: 1,600 mm Dimensions: - Height: 2,600 mm - Length: 4,400 mm - Width: 2,400 mm - Total height: 2,950 mm Running Gear: - Tires: pneumatic (100%) – new - Front: 250-15 - Rear: 250-15 🧰 Equipment ✔ Full heated cabin ✔ Fork positioner ✔ Adjustable right fork height ✔ Truck leveling system 🟢 Condition Technical: 5/5 – fully serviced Visual: refurbished, as new, corrosion-free 🏭 Ideal for: ✔ Narrow aisle storage Bwsdpozva Svofx Abtet ✔ Timber, steel, and pipe industries ✔ Handling of long loads ✔ Indoor and outdoor use 💼 What you get You are not buying a "used forklift." This is a fully inspected, work-ready machine: ✔ Each unit is thoroughly tested before sale ✔ Ready for immediate deployment ✔ Live video demo available 🎥 ✔ Delivery direct to your site 🚛 Delivery and Support ✔ Pan-European transport ✔ Complete logistics service ✔ Leasing/financing support ✔ After-sales support 🏆 Why FT LOGISTICS? We supply machines that work – not ones waiting for repair. ✔ 100+ machines in stock ✔ In-house service and preparation ✔ Pan-European experience ✔ Hundreds of satisfied customers 📞 Contact us today FT LOGISTICS – Quality We Stand Behind. Service You Can Trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, operating hours: 11,587 h, load capacity: 20,000 kg, lifting height: 3,500 mm, load center: 1,250 mm, fuel type: diesel, mast type: duplex, construction height: 3,750 mm, motor manufacturer: VOLVO, gearing type: automatic, fork carriage width: 1,750 mm, fork length: 2,000 mm, fork width: 250 mm, fork thickness: 100 mm, tire condition: 90 %, front tire type: pneumatic tires (air-filled), front tire size: 14.00-24, rear tire type: pneumatic tires (air-filled), rear tire size: 14.00-24, overall weight: 48,400 kg, empty load weight: 28,400 kg, total height: 3,850 mm, total length: 7,200 mm, total width: 3,100 mm, color: yellow, Equipment: CE marking, cabin, centralized greasing system, lighting, pallet forks, sideshift, # 🚜 BAUMANN GCS200/20/35 | DIESEL | 💪 20 TONS | DUPLEX 3500 MM | ⚙️ FORK POSITIONER | 🏠 FULL HEATED CAB | ✅ READY FOR WORK 🔧 FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY If you are looking for a reliable heavy-duty sideloading forklift that generates value from day one instead of creating unexpected maintenance costs, this is the right machine for you. We are offering a fully inspected and work-ready BAUMANN GCS200/20/35 heavy-duty sideloading forklift. The truck has undergone a comprehensive technical inspection, extensive operational testing, and is ready for immediate operation in steel service centers, ports, timber yards, concrete plants, and heavy industrial facilities. ## ⭐ KEY ADVANTAGES ✅ Fully serviced before delivery 🛡️ Start-up warranty 💪 Heavy-duty 20,000 kg lifting capacity ⚙️ Hydraulic fork positioner 🏠 Full heated operator cab 📹 Camera system 🔩 Reliable Volvo diesel engine 🛞 80% pneumatic tires 🚀 Ready for immediate work 🎥 Live online demonstration available 🚛 Worldwide delivery ## 📋 TECHNICAL SPECIFICATIONS 🏭 Manufacturer: BAUMANN 🚜 Model: GCS200/20/35 📅 Year: 2009 🏋️ Capacity: 20,000 kg ⚖️ Machine Weight: 28,400 kg ⛽ Power: Diesel 🔩 Engine: Volvo ⏱️ Hours: 11,587 h ⬆️ Mast: Duplex 📏 Lift Height: 3,500 mm ⚙️ Fork Positioner: 1,750 mm 📐 Fork Size: 2000 × 250 × 100 mm ↔️ Side Shift: No 🏠 Cab: Full cab with heating ## 📐 DIMENSIONS 📏 Overall Height: 3,850 mm 📏 Collapsed Mast Height: 3,750 mm 📏 Overall Length: 7,200 mm 📏 Overall Width: 3,100 mm 📏 Platform Length: 2,000 mm ## 🛞 TIRES Front: 14.00-24 Pneumatic Rear: 14.00-24 Pneumatic Bwodpfezvbblox Abtjt Condition: Approximately 80% ## ⚙️ EQUIPMENT ⚙️ Hydraulic fork positioner 🏠 Full heated cab 🔥 Cab heating 📹 Camera system 💡 Working lights 🔩 Volvo diesel engine ## 🏗️ IDEAL FOR 🏭 Steel mills and steel service centers 🔩 Steel, beams, pipes, and long materials 🪵 Timber industry 🏗️ Heavy manufacturing 🚢 Ports and terminals 🚛 Indoor and outdoor logistics ## 🤝 WHY CHOOSE FT LOGISTICS Every machine undergoes complete servicing, technical inspection, and operational testing before delivery. We stock over 100 forklifts and deliver throughout Europe, South America, Africa, Asia, and the Middle East. ## 🌍 WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty 👨‍🔧 Technical support 💳 Leasing and financing 🚛 Worldwide transport 📄 Export documentation 🤝 After-sales support 🎥 Live online demonstrations, additional photos, and videos are available on request. # FT LOGISTICS ### 🚜 We Deliver Machines Ready To Work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,470 h, load capacity: 6,000 kg, lifting height: 4,500 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 300-15, rear tire type: cushion tires (black), rear tire size: 300-15, overall weight: 15,500 kg, empty load weight: 9,500 kg, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, color: yellow, Equipment: CE marking, cabin, lighting, pallet forks, retractable fork, sideshift, SIDELOADER – COMBILIFT C6000FSL – 2017 | 3470 MTH | DIESEL | DUPLEX 4500 mm Ready to work from day one – no investment, no risk --- ### Why this forklift? Looking for a machine that won’t stop your production? ⚙️ This COMBILIFT C6000FSL is a proven unit after a full service – ready to work immediately. No hidden costs. ✔ major service completed (oils, filters, full inspection) ✔ technical & visual condition: like new ✔ only 3470 MTH – low usage ✔ new tyres – no extra investment --- ### Key specifications ✔ Capacity: 6000 kg ✔ Diesel drive ✔ Duplex mast – 4500 mm ✔ Fork positioner: 1360 mm ✔ Forks: 1200 mm ✔ Full heated cabin --- ### Technical details ✔ Year: 2017 ✔ Weight: 9500 kg ✔ Load centre: 600 mm ✔ Lifting height: 4500 mm ✔ Dimensions: * Length: 4700 mm * Width: 2100 mm * Height: 2650 mm ✔ Tyres: super elastic (new) ✔ Equipment: cabin, fork positioner ✔ Condition: * Technical: 5/5 * Visual: like new, no corrosion --- ### Ideal for ✔ narrow aisles ✔ timber, steel & pipe industry ✔ long loads ✔ indoor & outdoor use --- ### What you get Not just a used forklift – but a ready-to-work machine: ✔ fully tested before sale ✔ ready for immediate use ✔ online presentation available ✔ transport available --- ### Why FT LOGISTICS? Bwsdpozvbccjfx Abtjt We deliver machines that work – not stay in service. ✔ 100+ machines in stock ✔ own service & preparation ✔ experience across Europe ✔ hundreds of satisfied clients

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 14,604 h, load capacity: 5,000 kg, lifting height: 4,500 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,200 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,360 mm, fork length: 1,800 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23x10-12, rear tire type: superelastic tires (black), rear tire size: 355/50-15, overall weight: 14,500 kg, empty load weight: 9,500 kg, total height: 2,500 mm, total length: 3,900 mm, total width: 2,100 mm, color: green, Equipment: all wheel drive, cabin, lighting, pallet forks, 🔹 Looking for a reliable forklift? We are industry specialists! 🔹 We specialize in the sale of high-quality forklifts, offering tested machines in excellent condition. Check out our offer and find the perfect equipment for your business! 🚜🔧 In this listing, we present: 🚜 COMBILIFT C5000SL - DUPLEX 4500mm - Year 2006 - 14604 MTH - DIESEL - CONDITION 5/5 This forklift is in excellent technical condition, ready for immediate use. ✅ Key Features & Technical Specifications: ✔ Model: COMBILIFT C5000SL ✔ Year of production: 2006 ✔ Lifting capacity: 5000 kg ✔ Operating hours: 14604 hours ✔ Mast type: Duplex ✔ Lifting height: 4500 mm ✔ Drive: Diesel ⛽ ✔ Load center: 600 mm ✔ Engine manufacturer: KUBOTA V3300-T ✔ Power: 48 HP 🔥 ✔ Total weight: 9500 kg ✔ Tires: Solid, Superelastic, in good condition 🛞 ✔ Front tires: Superelastic - 23x10-12 - 100% TREAD 🏁 ✔ Rear tires: Superelastic - 355/50-15 - 100% TREAD 🏁 ✔ Overall forklift height - structural (highest point with mast lowered): 3200 mm ✔ Technical condition: Fault-free, after a service inspection 🔍 ✔ Visual condition: Very good ✨ ✔ Fork length: 1800 mm ✔ Overall height: 2500 mm ✔ Overall length: 3900 mm ✔ Overall width: 2100 mm - Fork positioner width ✔ Positioner width: 1360 mm 🛠 Equipment: 🔹Lighting 🔹 Adjustable boom 🔹 Side shift 🔹 Pallet forks 🚧 Versatile Forklift – Ideal for Heavy-Duty Operations 🚧 This forklift is an ideal solution for industries that require efficient handling of long loads in narrow spaces, such as the wood, steel, and pipe industries. Thanks to its multi-directional movement function, the forklift ensures easy maneuverability and optimal warehouse space utilization. 🔥 Additional Features: ✅ Integrated multi-directional control system 🎛 ✅ Comfortable operator cabin 🏠 ✅ High reliability in intensive use ⚙ ✅ Perfect for both outdoor and indoor warehouse operations 🏭 🔍 Condition: The machine is fully operational, regularly serviced, and ready for immediate use. 🚛 Transport & Delivery: Bwedpfx Ajzvbcijbtet We offer forklift transport across Europe. 🌍 Free initial inspection included. 🛠 💰 Pricing & Financing: We offer comprehensive financing support, including quick leasing and loan decisions, even for new companies or businesses in difficult financial situations. Leasing decision in just 2 hours! ✔ EUR/PLN invoicing available 💶 ✔ Leasing financing & startup program for new businesses 📈 ✔ Authorized supplier for major leasing companies 🔑 ✔ Fast, simple, and affordable financing 💼 📞 Contact us to schedule a viewing!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 6,000 h, functionality: fully functional, type of input current: three-phase, workpiece weight (max.): 500 kg, input voltage: 380 V, travel distance X-axis: 3,650 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 150 mm, repeat accuracy: 0.02 mm, table length: 6,000 mm, table width: 2,000 mm, Shuttle SH-4020 – 5-axis abrasive waterjet cutting machine, year 2019 Large-format 5-axis waterjet system for precision cutting of natural stone, engineered stone, ceramics, glass, composites, and metals. The machine has been in regular production use in a stone fabrication facility and is fully operational, available for inspection while powered on. Key Features Generous 3650 × 1900 mm cutting area – handles full slabs and large plates. Bwjdpfozvdhnox Abtst 5-axis cutting head for bevels, chamfers, miters, and taper-compensated cuts. High-pressure intensifier pump, 37 kW, up to 380 MPa (55,000 psi). Repeatability ±0.02 mm. Table capacity: 500 kg workpiece weight. Cold cutting process – no heat-affected zone, no material distortion. Ready for immediate relocation; located in the EU with convenient transport options across Europe. Suitable for: stone and quartz fabrication, architectural elements, inlay and waterjet mosaics, glass and ceramic processing, sheet metal and composite cutting, and job-shop contract cutting.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, spindle speed (max.): 3,150 rpm, table width: 630 mm, table load: 3,000 kg, table length: 1,700 mm, mount diameter: 50 mm, total height: 2,300 mm, total width: 2,300 mm, total length: 4,700 mm, rotational speed (max.): 3,150 rpm, overall weight: 6,000 kg, 2013 Overhauled by REIDEN SWISS New regrinded New iTNC530 New Hr410 Handwheel New CE-Safety  New Milling head gears and bearing New LS186C Glas scales New Blum TC60 3D taster Geomtrical DIN 8615 ! Overhauling cost CHF 250k X-Axis: 1300mm Y-Axis: 630mm Z-Axis: 630mm Table Length: 1700mm Table Width: 630mm Table load: 3000 Power on spindle:16kW Spindle speeds: 3150Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Bodpfszvfiaex Abtjwt Length: 4700mm Width: 2300mm Height: 2300mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), amount 1 STK Dimensions (HxWxD) 280 x 190 x 190 mm diameter 60 mm Bwedpfx Aszuum Esbtot -> Bestcut gear hobbing cutter with HSS cutting material - Chip angle < 8° -> Module 16 F.20° 1gg Lks -> BP IV D-Stg < 5°40' -> 5° 40' Sp Stg 00

Condition: good (used), Year of construction: 2000, Machine is with SK 30 20.000 rpm Bjdoznmqispfx Abtewt Parts shown by hand not come.

Condition: excellent (used), CATALOGUE NUMBER: 7133 TECHNICAL DATA - max. width of workpiece: 220mm - max. height of workpiece: 120mm - 5 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 120mm 3) vertical left 120mm; 2 & 3, 11kW 4) horizontal upper 220mm, 11kW 5) horizontal lower 220mm, 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - pneumatic pressure rollers - from above: 4 infeed rollers, toothed, including 2 double rollers - from above: 1 double outfeed roller, smooth, rubber - from below: outfeed roller, rubber - feed on cardan shafts - feed speed adjustment - feed motor 2.2kW - lifting motor 0.25kW - electric adjustment of planing thickness - length of infeed table 1970mm - central lubrication - diameter of dust extraction nozzle 4x120mm, 140mm - dimensions (L/W/H): 3500x1550x1400mm Bwsdpfxszrulco Abtot - weight 1750kg ADVANTAGES - with 5 heads - German production - unpainted - used planer, very good condition Net price: 39900 PLN Net price: 9500 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary with higher fluctuations)

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Deckel FP 1 MK with TNC 123, year of manufacture 1994, with CE marking. Spindle speeds: 40 - 2000 rpm, SK 40. Bodpfxszx Ep So Abtswt Travel distances: X 300, Y 160, Z 340. Stepless feed rate + rapid traverse in all axes. Weight: approx. 880 kg. Accessories: Universal table, electric central lubrication system, coolant system, collet set, 5 tool holders, Röhm machine vise, swarf drawer. Condition: Original, not repainted, smooth operation at all spindle speeds and axis movements, and flawless guidance. Can be inspected while powered on. Free loading at D-88433 Schemmerhofen.