Used Suction Feeder for sale (4,753)

Condition: good (used), Year of construction: 1998, Baujahr 1998 Spindelstunden 52’000h Stangendurchlass 40mm Fanuc Series 18i-T Späneförderer Toolsetter integriert 12Stationen 1Spindel, X und Z Achse Kurzstangenlader Spannzangenfutter F48 Bdjdpfxotth Hge Abteg

Condition: used, Rotary Airlock Feeder, Rotary Feeder – Used Machine Manufacturer: VEM / VEB Elektromotorenwerke Thurm (GDR) Model: ZG3 KMRB 80 G 4 Overall Dimensions: Width: 1210 mm Depth: 380 mm Height: 590 mm Bjdpfszrwqnsx Abtedg Technical Specifications: Motor Power: 1.5 kW Output Speed: 40 rpm Output Torque: 354 Nm Voltage: 220/380 V (Three-phase) Rated Current: 6.2 / 3.6 A Year of Manufacture: 1989

Condition: used, Year of construction: 2005, overall weight: 7,400 kg, FANUC Series 18i-TB control system, IEMCA AUTOMATA 2.5 robot loader – year 2010. Bsdpfx Abszxr Izetodg AVAILABLE FROM NOVEMBER 2026.

Condition: used, Year of construction: 2006, overall weight: 4,740 kg, FANUC Series 18i-TB control unit, with TOP AUTOMAZIONI FU350SX hydraulic cylinder – year 2024 Bdedpjzxr Dcofx Abteg Workholding fixtures and tools not included. AVAILABLE: November 2026

Condition: used, Year of construction: 2013, overall weight: 5,000 kg, FANUC Series 32i-MODEL B control unit, with TOP AUTOMAZIONI XF365 linear guide. Bodpfx Ajzxrz Uebtsdg Workholding devices and tools not included. AVAILABLE: November 2026

Condition: used, Year of construction: 2015, overall weight: 5,500 kg, OKUMA OSP-P300L-R control unit, with TOP AUTOMAZIONI XFS370 bar feed system. Workholding and tooling are not included. AVAILABLE IN NOVEMBER 2026. Bdsdszxrx Topfx Abtsg

Condition: used, Year of construction: 1998, short loader Bdodpsvvuu Njfx Abteg bar diameter 12-72 mm

Condition: good (used), Year of construction: 2001, bar diameter (min.): 3 mm, bar diameter (max.): 32 mm, - Guide channel (oil-damped) - max. bar length 3,200 mm - included guide channel: D 21 mm - material pusher length L - centering device - synchronization unit - last mounted on a sliding head automatic lathe - weight approx. 800 kg - dimensions LxWxH 4,000x700x1,200 mm Bjdjy N Tiqjpfx Abtodg

Condition: like new (used), Manufacturer: Schenck Size: 1.600 x 1.200mm Bdedpfx Aog Snvmobtjg Unbalance Motor: 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. – 3,7 / 2,15A) With Rubber Protection. Springs included

Condition: used, Return air and exhaust air ducting: The cleaned air is returned to the machine room via galvanized sheet metal ducts. The return air duct is connected to the upper part of the filter unit. A tested fire protection damper K 90 is installed in the area where the duct passes through the workshop wall. Bodpfx Aezu Ah Djbtedg Technical data: Duct cross-section: 700x700 mm Return air velocity: 7.5 m/s Exhaust air velocity from the workshop:

Condition: used, Year of construction: 2020, An FGC extraction system for the extraction of oil and coolant aerosols from one or more CNC machines is offered. Volumetric flow rate: 600m³/h, motor power: 1.5kW. Including telescopic stand. The filters should be replaced. An on-site inspection is possible. Bdodpfxszxr R Aj Abtjg

Condition: used, Year of construction: 2007, Format: 360 x 360 mm Bdjdey Dufpopfx Abtsg Equipment: mobile envelope feeder format from 100 x 100 mm to 360 x 360 mm speed 15000 per/hours senor controlled for automatic speed adjustmend

Condition: ready for operation (used), Year of construction: 2008, bar length: 3,200 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Bjdpsw Rfiwjfx Abtjdg Magazine capacity 280 Bar change time 27 sec. Feed rate 150 mm/sec. adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: ready for operation (used), functionality: fully functional, bar length: 3,200 mm, bar diameter (max.): 43 mm, overall weight: 900 kg, Bar diameter Ø 5-45 mm Bsdpfx Absw Rcfvetedg Magazine capacity 280 Min. bar changeover time 27 sec. Feed rate 150 mm/sec., adjustable Return speed 950 mm/sec. Supply voltage 230/400 Volt Installed power 3 KW Compressed air 6 bar Weight 900 kg

Condition: excellent (used), Catalogue No.: 7502 TECHNICAL DATA Feed Carriage DTBC-P — Wheelbase: 750 mm — Feedstock diameter: 100–800 mm — Total lateral travel: 160 mm — Log rotation (left/right): 360° — Travel speed (forward & reverse): stepless — Hydraulic pump motor power: 5.5 kW Auxiliary Carriage DTCB — Wheelbase: 750 mm — Lateral travel range: 160 mm — Log rotation (left/right): 360° — Lateral movement motor power: 1.1 kW — Feed carriage dimensions (L/W/H): 2850/1400/1500 mm — Auxiliary carriage dimensions (L/W/H): 950/650/750 mm Bdedszrnxvspfx Abteg — Total weight: 1450 kg ADVANTAGES – Manufactured in Poland – Robust construction – Includes hoses and chains – Used machine, in very good condition, fully refurbished (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or cants on the infeed side of the sawmill within a diameter range of 100 mm to 750 mm. The feed carriage is intended for feeding logs and cants into the sawmill within a diameter range of 100 mm to 750 mm. The machine facilitates log handling, including clamping the log, lateral movement, and rotating, all powered by hydraulic drives. Net price: 59,900 PLN Net price: 14,260 EUR (based on 4.2 EUR/PLN exchange rate) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and brand names are used for informational purposes only, to enable identification of the goods. We only resell items that have already been placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20001901, type of input current: three-phase, overall weight: 990 kg, input voltage: 400 V, total width: 1,780 mm, total length: 2,130 mm, total height: 3,070 mm, volume flow: 14,000 m³/h, filter area: 189 m², suction capacity: 14,000 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, input current: 26 A, intake vacuum (max.): 48 mbar, actuation type: electric, ESTA DUSTMAC F-189 industrial welding fume extraction/filtration unit for sale. Suitable for extracting and filtering welding fumes and dust from multiple extraction points, welding booths, or large capture hoods. Main technical specifications: - Manufacturer: ESTA - Model: DUSTMAC F-189 - Year: 2020 Bodezuwqtjpfx Abtedg - Serial No.: 20001901 - Filter surface area: 189 m² - Number of filters: 9 pcs - Max. airflow rate: approx. 14,000 m³/h - Max. negative pressure: approx. 4,800 Pa - Main fan motor power: 15 kW - Voltage: 400 V / 50 Hz - Motor speed: 2945 rpm - Current: 25.9 / 15 A (according to the motor nameplate) - Approx. dimensions: 2,130 x 1,780 x 3,070 mm - Weight: 990 kg (according to the nameplate) The unit was reportedly used for approximately one year and then put into storage. Used equipment, sold as-is. Currently visible but not connected to power. Condition and completeness are shown in the photos. Location: Estonia. Loading: Forklift capability is available on-site. We can load the equipment onto the buyer’s truck. Transport: Transportation costs are the responsibility of the buyer.

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, ESTRELLA DN 1000 GLASS-LINED PRESSURE NUTSCHE FILTER High-quality pharmaceutical/chemical pressure nutsche filter manufactured by Estrella AG, Switzerland. Manufacturer: Estrella AG, Ettingen, Switzerland Year: 1994 Type: Pressure Nutsche Filter / Pressure Filter Diameter: DN 1000 Filter area: approx. 0.75 m² Bdodpfx Aeu U Afujbtsg Material: Steel, highly acid-resistant, glass-lined Glass lining quality: ESTRELLA 2000 The unit is equipped with a heavy-duty hydraulic lifting and tilting system for opening the vessel. The hydraulic system is manually operated and integrated into the robust steel frame. Main equipment: - DN 1000 pressure nutsche filter - Approx. 0.75 m² filtration area - Acid-resistant, glass-lined steel construction - ESTRELLA 2000 glass lining - Large, hydraulically lifted and tiltable top cover - Manual hydraulic pump - DN 1000 x 370 top cover - DN 1000 x 550 center section - DN 1000 x 370 bottom section - Filter / perforated plate - 2 x DN 100 connections with sight-glass fittings - 3 x DN 50 connections on top cover - DN 50 bottom connection - Additional fittings and pressure gauge - Heavy-duty steel support frame According to the original manufacturer documentation, the ESTRELLA 2000 glass lining was high-voltage tested for porosity in accordance with DIN ISO 2746. The glass-lined surfaces are visually in very good condition. The blue enamel lining shows a clean and well-preserved appearance. The machine originates from pharmaceutical production. Original Estrella documentation, drawings, and historical manufacturing documents are partially available. Further technical documentation is currently being located and will be supplied if available. The original purchase price in 1994 was CHF 59,218 net, excluding transport and taxes. Inspection of the unit is possible at our warehouse in Switzerland by appointment. CYCRON GmbH Switzerland

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg Bdodpfx Ajzugqiobtsg The device is normally operated with an intermediate device for stepless speed control. This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: used, Year of construction: 2001, turning diameter: 210 mm, spindle bore: 53 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,500 kg, distance table center to spindle nose: 960 mm, OKUMA OSP-U100L control unit, with TOP AUTOMAZIONI XF370 bar feed system. Workholding and tooling are not included. Bdodpjzw Nu Nofx Abtjg MUST BE PICKED UP BY SEPTEMBER 2026.

Year of construction: 2006, condition: excellent (used), functionality: fully functional, HOSOKAWA ALPINE 100 AS AEROPLEX SPIRAL JET MILL WITH K-TRON GRAVIMETRIC FEEDING SYSTEM For sale: complete Hosokawa Alpine Aeroplex 100 AS spiral jet mill system with K-Tron gravimetric dosing/feeding unit. The system originates from pharmaceutical use and was originally supplied to Mepha AG, Switzerland. The machine is in very good, clean condition and is supplied with extensive original documentation for both the Hosokawa Alpine jet mill and the K-Tron feeding system. HOSOKAWA ALPINE 100 AS Manufacturer: Hosokawa Alpine AG, Germany Type: Aeroplex 100 AS Machine No.: P2 150 959/1 Year of manufacture: 2006 Grinding chamber diameter: 100 mm Weight of jet mill: approx. 12 kg CONFIGURATION OF THE JET MILL Nozzle ring: - Nozzle angle: 50° - Number of nozzles: 4 - Nozzle diameter: 1.5 mm Injector: - Injector drive nozzle: Ø 1.5 mm - Catch nozzle: Ø 3.5 mm Compressed-air connections: - Grinding air: 10 bar(g) - Injector air: 10 bar(g) - Permissible operating pressure: +/- 50 mbar Bdedpfszxt Snex Abtsg Connections: - Product feed: 2" - Grinding air: 1/2" - Injector air: 1/2" - Fine product outlet: 1 1/2" According to the original order-specific documentation, the machine is equipped with white, FDA-approved silicone seals. K-TRON GRAVIMETRIC FEEDING/DOSING SYSTEM The Alpine mill is combined with a K-Tron dosing system for controlled and reproducible product feeding. The system includes: - K-Tron gravimetric feeder - K-Tron KCM control unit - K-Tron Digi-Drive - Stainless steel product hopper - Weighing/measuring system - Dosing drive - Several interchangeable dosing screws for different feeding ranges - Stainless steel product feed components The K-Tron weighing system is identified as: Type: SFS 24/20 (+20KG VL) w.D. Capacity: 240 N Article No.: Serial No.: 10711664 Country of origin: Switzerland APPLICATION The Hosokawa Alpine Aeroplex 100 AS is a spiral jet mill designed for fine grinding and micronization. The grinding process takes place using compressed air, without rotating grinding tools inside the grinding chamber. Typical applications include: - Pharmaceutical powders and active ingredients - Fine chemicals - Laboratory and pilot-scale production - Micronization - Fine grinding of dry powders - Development and small production batches DOCUMENTATION Extensive original documentation is included. Available documentation includes, among others: - Original Hosokawa Alpine 100 AS operating manual - Order-specific machine data - Technical drawings - Operating and maintenance instructions - Cleaning instructions - Spare parts information - K-Tron feeder operating documentation - K-Tron technical drawings and configuration data CONDITION Very good and clean used condition from pharmaceutical use. The system was dismantled for cleaning and has been carefully reassembled. The photographs show the actual machine and its current configuration. Inspection and demonstration by appointment in 4226 Breitenbach, Switzerland. Worldwide delivery can be arranged. Subject to prior sale and errors.

Condition: used, Year of construction: 2011, 5 machines for sale only as a PACKAGE: 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar feeder 2x FMB / 1x Breuning The machines come from an ongoing production process. 2. CNC lathe, 2 units, one defective Bdedjzxhxvepfx Abteg Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle - Upper turret - Lower turret - Bar feeder TOP ETL 8-45 One machine comes from an ongoing production process; the other was previously used as a source of spare parts, and several components have been removed. The sale is without clamping devices and tools. Dismantling and loading can be organized by a specialist company for an additional charge.

Condition: excellent (used), Year of construction: 2000, An inclined conveyor with steel hinge plates. Last loaded with a wheel loader and a dump truck. Overall length: 9.6 m Size of the feed hopper: 8.0 x 3.6 m Width of the conveyor at the bottom: 1.85 m Bdsdpfx Ajiwxmbobteg Maximum width with drive: 3.2 m Width of the conveyor belt: 1.3 m Overall height: 5.3 m Belt speed: 0.05 - 0.29 m/min Conveyor chain: FV 315 with bushing and idler roller Throughput: 3 to 14 m³/hour Gear motor, belt, SEW: 0.75 kW Speed: 0.2 rpm Torque: 18000 Nm Speed of the winding shaft: 64 rpm Gear motor, winding drum, Flender: 7.5 kW Total weight: approx. 20 tons A cover belt conveyor / steep conveyor is also available.

Condition: like new (used), functionality: fully functional, Year of construction: 2015, overall weight: 230 kg, Kappel Suction Lifter Model: DSZ2 / 12 V Bdsdpfxszxy T Se Abteg Year: 2012 Drive: Battery-powered Lifting capacity: 1500 kg Suction plate: 6

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm Bjdpfx Aszvbyzsbtjdg dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: excellent (used), mileage: 47,117 km, power: 390 kW (530.25 HP), first registration: 04/2024, fuel type: diesel, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 500 l, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, total length: 9,850 mm, total width: 2,550 mm, total height: 3,900 mm, loading space volume: 8 m³, Year of construction: 2024, Equipment: AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power assisted steering, power mirror, retarder, trailer coupling, - Aluminum fuel tank - Rear work light - Front work light - Brake booster - Differential lock - High beam - Windshield - Low noise - Speed limiter - Intarder - Air conditioning - Air suspension - Air-suspended seats - Air horn - Media system - Rotating beacon - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication system - Tow hitch Technical Information Number of cylinders: 8 Engine displacement: 16,353 cc Front axle: Steerable Rear axle 1: Lift axle; Steerable Weights Unladen weight: 22,845 kg Payload: 4,155 kg GVW: 27,000 kg Functional Body manufacturer: MTS DINO 8 M3 SUCTION EXCAVATOR Condition Technical condition: very good Optical condition: very good SCANIA R 530 XT B6X2*4NA + MTS DINO 8 M³ SUCTION EXCAVATOR First registration: 04/22/2024 Mileage: only 47,117 km Body: MTS DINO 8 m³ with MEGA ARM Turbine hours: 1,168 hours Compressor hours: 1,155 hours Previous owner: from first hand Condition: Very well maintained, fully equipped, and ready for immediate use – READY FOR WORK! We offer this very young and exceptionally well-equipped Scania R 530 XT B6X2*4NA with a professional MTS DINO 8 m³ suction excavator body. The powerful Scania XT chassis, combined with the professional MTS suction technology, makes this vehicle an ideal machine for civil engineering, cable and pipeline construction, road construction, industrial work, and numerous other demanding applications. The suction excavator features, among other things, an MTS MEGA ARM with a hydraulic swivel head, an 8 m³ tipping hopper with a complete stainless steel interior lining, a high-pressure water unit, a ReciDrive self-propelled function, 2 remote controls, and 2 powerful turbine fans. SCANIA R 530 XT B6X2*4NA * Scania R 530 XT * B6X2*4NA version * 6x2 chassis * Powerful Scania 530 hp engine Bodpfxezxz A Ie Abtsdg * XT Heavy-Duty version * First registration 04/22/2024 * Mileage only 47,117 km * Air-suspended * Last axle liftable * Last axle steerable * CR17N XT cab * Automatic transmission * Intarder / Retarder * 1 folding bed in the cab * Navigation system * Multimedia system * Lamp bar on the cab roof * Additional spotlights * Trailer coupling * Central lubrication system MTS DINO 8 M³ SUCTION EXCAVATOR BODY Professional and very comprehensively equipped MTS DINO 8 m³ suction excavator body. The MTS DINO is designed for the powerful suction of a wide variety of materials and is ideally suited for work in areas where conventional excavation is difficult or associated with an increased risk of damage. MTS MEGA ARM Equipped with the large MTS MEGA ARM for flexible and precise positioning of the suction hose. Equipment includes, among other things: * Hydraulically operated MEGA ARM * Hydraulic swivel head * Large working area * Precise positioning of the suction hose * Operation via remote control This allows the suction hose to be positioned very precisely at the desired work location...