Used Tecno for sale (136)

Condition: like new (used), Year of construction: 2008, functionality: fully functional, Working Area Max swing diameter over bed: 500 mm Swing diameter over cross slide X: 375 mm Max turning diameter: 246 mm Max turning length: 445 mm Chuck diameter: 210 mm Bar capacity: 65 mm Cross travel (X): 213 mm Longitudinal travel (Z): 450 mm Feeds Rapid traverse X/Z: 24 / 30 m/min Lsdpjxz E Uyofx Aanohr Main Spindle Spindle nose (flat flange): 140 h5 mm Front bearing inner diameter: 100 mm Spindle motor power (40/100% ED): 16 / 12 kW Torque (40/100% ED): 153 / 115 Nm Spindle speed: 25–6000 rpm Tool Turret Number of tool stations: 12 Motorized stations: 12 Shank diameter (DIN 69880): 30 mm Motor power (40% ED): 9 kW Max torque (40% ED): 20 Nm Max speed: 4500 rpm Tailstock Automatic tailstock travel: 450 mm Center taper: MT 4 Max tailstock thrust: 400 daN Year of construction: 2008 Machine equipment: • Chip conveyor • Preparation for fume extractor • Various fixed and driven tool holders • Instruction manuals

Condition: used, 25/11/2025 Barnaul 1000t press in perfect working condition, equipped with a Press Transfer System Tecnomatic Italy. Lodpfx Ajxqq E Ajanehr Nominal force: 1000 ton (≈10,000 kN). ​Slide (ram) stroke: 170 mm. Number of single strokes per minute, not less than: 32 spm Permissible number of double strokes per minute: 18 spm Distance between table and slide at bottom position: 630 mm Adjustment range of distance between table and slide: 16 mm. ​Table size (bolster): 1000 × 800 mm Hole diameter in the slide: 80 mm. Bolster (sub-plate) thickness: 160 mm. Bottom ejector stroke, not less than: 100 mm. Bottom ejector force: 320 kN Bottom ejector position adjustment range: 25 mm. Top ejector stroke (in slide): 15 mm. Top ejector force (in slide), not less than: 100 kN. Main drive motor power: 40 kW; speed: 930 rpm. Height of press above floor level: 3,470 mm. Overall height: 3,620 mm. Overall dimensions, mm: front to back 2,030; left to right 1,950. Net weight without foundation: 25637 kg.

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Lhodpfexrahcjx Aansr Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Year of construction: 1978, condition: used, Technical details: lifting capacity: 3,2 t span width: 3700 mm height of hook: 850 mm weight of the machine approx.: 260 kg space requirements of the machine approx.: L:3,8xB:0,3xH:0,9 m Hoist Traverse with two magnetic lifter Hoist: - hook distance: min./max. 1500/3700mm Ljdpfx Aasu Nvfgenjhr magnetic lifter: - Make /Type: Tecnomagnetc /MAXX 1000 - Italy - YOM.: 2001 - lifting capacity: 1000 kg - empty weightt: 36 kg - grip surface: 285x110mm *

Condition: good (used), Year of construction: 2004, Laboratory roller kiln for firing ceramics and porcelain stoneware. Kiln from the Spanish company TAI - TECNOLOGIAS APLICADAS A LA INDUSTRIA. Kiln length: 10 meters. Lhodpfxexu Nz Ds Aansr

Year of construction: 2008, condition: excellent (used), Special opportunity! From the federal government's inventory, we can offer you this perfectly maintained "AutoVue Innova" blood analysis system from the global brand Ortho Clinical Diagnostics, with every conceivable extra! The AutoVue Innova is a fully automated blood analysis system used worldwide – primarily for establishing and operating blood banks. It can provide blood typing and a wide range of other data extremely efficiently and has become an indispensable part of any larger laboratory. The system was acquired by the federal government in 2008/2009 and has been continuously tested and maintained. All components are in perfect visual and technical condition and show no significant damage – see pictures. It was taken out of service in 2023 due to a new acquisition and was fully operational until recently. Lhsdpfxewh Tn Do Aaner Scope of delivery: - AutoVue Innova blood analysis system - 2 BioVue System centrifuges - 2 BioVue System Heath Block-32 thermoblocks - 3 BioVue System digital multidispenser pipettes - 1 digital incubator thermometer - 9 Low Volume 96 Well Lock Nut Evo tips - 5 Sample Quadrant Blue, 5 Sample Quadrant Green, 4 Sample Quadrant Red - 3 10-place sample holders - 5 Rotor Reagents - 2 Philips spare lamps - 14 Mat Filters - 1 OrthoScan 3.50.C software, 1 TecnoSoft Resolvigen 3 software - 1 ELO touchscreen, 1 METO OS-204 thermal transfer label printer with spare rolls - 1 Zebra TLP 2844 thermal transfer label printer with spare rolls - 1 Epson Perfection 4900 photo scanner Photo, - 2 x Adaptus 3800g handheld barcode readers + 1 x Honeywell Eclipse MS5145 handheld barcode reader - Spare parts and accessories, manuals. Dimensions: 1600 x 900 x 755 mm Weight: approx. 230 kg (AutoVue Innova only) Weight: approx. 320 kg (total weight of all components) Shipping is available for an additional charge within three business days after receipt of payment, insured by a freight forwarder. You also have the option of picking up the device from us during regular business hours. The total weight of the system, including accessories and pallets, is approximately 350 kg, on three pallets. This sale is exclusively for commercial customers; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold without any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Condition: like new (used), Year of construction: 2005, functionality: fully functional, turning length: 450 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 213 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 65 mm, Siemens 840 D CNC Working area Max. swing diameter on bed 505 mm Swing diameter on X-slide 375 mm Chuck diameter 210 mm Bar capacity 65 mm Transverse travel (X) 213 mm Longitudinal travel (Z) 450 mm Feed rates X/Z-axis rapid traverse 24/30 m/min Ljdpfsw Adhwsx Aanshr Main spindle Spindle nose (flat flange) 140 h 5 mm Internal diameter of front bearing 100 mm Spindle motor power (40/100% DC) 16/12 kW Torque (40/100% DC) 153/115 Nm Spindle speed 25 - 6.000 rpm Tool turret Number of tool stations 12 Of which motorized 12 Shank diameter (according to DIN 69880) 30 mm Motor power (40% DC) 9 kW Maximum torque (40% DC) 20 Nm Maximum speed 4.500 min-1 Tailstock Tailstock stroke, automatic 450 mm Center point attachment 4 CM Tailstock thrust, max 400 daN Machine equipment: • Chip conveyor • Provision for fume extractor • 2 axial motorized modules • 4 radial motorized modules • Fixed tool holders

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 186770, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 60,000 m/min, rapid traverse Y-axis: 60,000 m/min, rapid traverse Z-axis: 60,000 m/min, controller manufacturer: MAZAK, controller model: FUSION, overall weight: 1,320 kg, spindle speed (min.): 18,000 rpm, number of slots in tool magazine: 80, tool weight: 1,200 g, Equipment: chip conveyor, documentation/manual, Mazak HCN 5000 Fusion horizontal machining center. Continuous 4th axis table, Tecnoforme 20 Bar system with side-mounted coonsep rotofilter. Used machine in good condition, can be inspected under power. Condition: Used Location: Italy Lhodexugv Eopfx Aanor

Condition: ready for operation (used), functionality: fully functional, mileage: 2,93,630 km, power: 213.29 kW (289.99 HP), first registration: 05/2009, fuel type: diesel, maximum load weight: 10,320 kg, overall weight: 26,000 kg, tire size: 315/80 R 22.5, axle configuration: 6x2, wheelbase: 4,000 mm, fuel: diesel, energy efficiency: A, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, loading space volume: 23 m³, Year of construction: 2009, Equipment: ABS, truck registration, RIGHT-HAND DRIVE VEHICLE – TECNOINDUSTRIE MERLO ZENIT 23 WASTE COMPACTOR WITH REAR DISCHARGE – BIN LIFT FOR 120-240-360 L CONTAINERS. Lodpfx Asxuplceanshr THIRD STEERING AXLE. ALL VEHICLES FOR SALE CAN BE INSPECTED AND CHECKED, WITH THE CUSTOMER FREE TO CHOOSE THE DESIRED TYPE OF REFURBISHMENT. OUR SALES STAFF ARE AVAILABLE MONDAY TO FRIDAY FROM 8:30 AM TO 6:30 PM AND SATURDAY FROM 8:30 AM TO 12:00 PM. YOU CAN REACH US BY CAR VIA THE A31 THIENE MOTORWAY EXIT OR BY TRAIN TO THIENE FS STATION.

Condition: good (used), MPS EF 410 - 8 color Label Printing Machine Ref.: FGT 25-230 We are pleased to present this 2008 MPS EF 410 - a high-precision, versatile UV flexo press designed for a wide range of applications. The MPS EF 410 model is a servo-driven, 410mm wide, multi-substrate press, capable of running self-adhesive materials as well as unsupported plastic films. With robust features and premium components, this machine is engineered for reliable, high-quality production. _____ Key Specifications & Configuration - Printing Width: 410 mm - Technology: Servo-driven UV flexo press - Substrate Handling: Spiral rollers and chill drums for multi-substrate versatility _____ Machine Features - Unwind Unit with Lift - Web Guide & Splice Table - Teknek Web Cleaner - 8 Flexo Printing Units for optimal color flexibility - Automatic Registration Control ensuring precise alignment - Delam/Relam with Web Turn Bars - enables printing of 2 colors on reverse side - Anti-Static Bars across the web path - 9 GEW UV Dryers providing efficient curing _____ Enhanced Finishing Capabilities - Full Rail System allowing for tool movement along the press - Overlamination/Cold Foil with UV drying for premium effects - Double Die Station: o 1 x K&B Gapmaster Die for advanced control o 1 x Tecnocut Electronically Adjustable Anvil - Dual Web Inspection Cameras (Top & Bottom) - Razor Slitting for precise edge cutting - Waste Matrix Rewind and Product Rewind units _____ Additional Equipment & Accessories - Impression Cylinder Sets (x8): Sizes include 68, 72, 74, 77, 78, 80, 84, 88, 90, 93, 96, 99, 102, 104, 108, 114, 120, 128 - Magnetic Cylinders: Sizes include 136, 144, 148, 154, 160, 168, 176, 180, 93, 96, 99, 102, 104, 114, 120, 128 - 22 Anilox Rolls in various sizes for consistent ink distribution Ledpfx Aasu Rdgbonehr _____ Technical and Optical Condition: - Technical: 9/10 (checked and in excellent running condition) - Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____

Condition: new, Fiat Scudo 1.5 145hp Series 3 Full optional 10" display Lhedpfx Aasxuwrkener Cruise control Tecno pack Bertona Frigo setup 0/4 degrees with 220V socket Vehicle km0 Free delivery throughout Italy up to

Condition: excellent (used), Year of construction: 2016, For sale: ROQprint ECO P10 2XL automatic screen printing carousel with accessories. The machine was manufactured in 2016 and upgraded in 2019 (flash units, additional pallets, accessories). Manufacturer: S.ROQUE – Máquinas e Tecnologia Laser S.A. (Portugal) Model: ROQprint ECO P10 2XL Serial number: RPE 1483 Lhodpfx Aoxb A A Ujaner Year of manufacture: 2016 Power supply: 3×400 VAC Active power: 88 kW Operating pressure: 0.7 MPa / 100 PSI Machine configuration (as per documentation): • Printing heads: 7 • Stations/pallets in circulation: 10 Flash dryers (total 4 units): • 2× ROQdry ECO 20400 2XL – S/N RDR 11432, year 2019, 20.4 kW, 3×400 VAC • 2× ROQdry ECO 9000 M – S/N RDR 7928, year 2016, 9.0 kW, 3×400 VAC Pallets (actual condition): • 10× 75×120 cm • 10× 45×100 cm • 10× 32×100 cm Maximum print area: 70×100 cm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 200 kg, spindle speed (max.): 9,000 rpm, CNC Heidenhain TNC 426 WORKING AREA: Longitudinal X: 500 mm Lodpfx Aasxz Axionjhr Cross Y: 400 mm Vertical Z: 400 mm Rotation: 360° Tilting: -10° / +95° SPINDLE: Spindle speed: 9,000 rpm Power (100% / 40%): 9 / 13 kW Tool taper: SK 40 DIN 69871 AXIS DRIVE: Feed rate X, Y, Z: 10,000 mm/min Rapid traverse X/Y/Z: 12 m/min TABLE: Manual rotary table with tilting axis Clamping surface: 700 x 500 mm Maximum load: 200 kg T-slot distance/size: 63 mm / 14 H7 TOOL CHANGER: Magazine capacity: 16 tools Maximum tool length: 290 mm Maximum tool weight: 6 kg DIMENSIONS AND WEIGHT: Dimensions: 1,783 x 1,647 x 2,534 mm (h) Weight: 3,000 kg Year: 2002

Condition: excellent (used), Year of construction: 1996, General Characteristics Total weight: 5,000 kg Maximum height: 2,900 mm Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Positioning resolution: 0.001 mm Min/max traverse speed XYZ: 0/900 mm/min Standard glass optical scale Work Tank Dimensions (LxWxH): 1,500x1,000x600 mm Table dimensions: 1,200x800 mm Maximum distance between table and electrode holder spindle: 230/730 mm Table-to-floor distance: 750 mm Electrode Electrode weight on Z-axis: - Interface system: 350 kg - With C-axis and spindle: 50 kg Workpiece Maximum workpiece weight on table: 4,200 kg Maximum workpiece dimensions: 1,450x950x500 mm Dielectric Tank Capacity: 1,600 l Filtration system: paper filter Work tank capacity: 1,050 l Generator Maximum working current (peak): 128 A Pulse type: ISOPULSE Lhodpsxwmbtjfx Aaner Machine equipped with: • Multifunction remote control • Measuring cycles • Contouring • PROGRAM EXPERT 2 • PILOT EXPERT 2 • SPAC generator Year of manufacture: 1996

Condition: like new (used), Year of construction: 2003, X-axis travel: 1,500 mm Y-axis travel: 750 mm Z-axis travel: 500 mm Working table height: 820 mm Clearance: 920 mm Max workpiece weight: 100,000 N Max head load: 4,000 N Tank model: fixed Tank dimensions: 2,300 x 1,300 x 700 mm Worktable: 1,700 x 1,000 mm Usable dielectric height: 620 mm Lsdpfx Aoxwma Asanshr Generator Minimum standard surface roughness: VDI=0 Power: 60 A The machine includes: • Generator with Expert System 120 A • Fixed work table 1700x1000 mm • CNC for simultaneous axis control • Integrated ONA C-axis with automatic System 3R Macro Standard clamping • Ecological filter with automatic cleaning cycle • Dielectric temperature thermocontrol Year of manufacture: 2003

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travel: 1,200 x 800 mm U and V axis travel: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.3 mm Simultaneous controllable axes: 4 (X, Y, U, V) Motors: AC motors on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg Filtration system Capacity: 3,000 L Conductivity control: automatic Resin capacity: 14 L Temperature control: automatic Dielectric cooling system: chiller Generator Power circuits: Mosfet AC Minimum roughness: Ra 0.35 Cutting speed: 360 mm²/min (with 0.3 mm brass wire) Automatic wire threading: standard Power supply: 400V three-phase CNC Hardware: Industrial PC, 64 bit Memory: 1 GB Display: 15” TFT touchscreen Data input: keyboard, RS 232, floppy, LAN, USB Positioning system: closed-loop servo-assisted Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm Machine equipped with: Ledsxwmacjpfx Aanehr • Optical scales on X and Y axes • 600 mm Z axis • Coil holder for up to 50 kg spools • 1 set of 0.25 mm guides • 1 set of 0.30 mm guides • Taper cutting system • Automatic wire threading and re-threading after breakage • Clamping system: frame with universal drilling • 64-bit CNC with 16 GB memory • AC power generator with anti-electrolysis device • Automatic technology generation • Serial interface, floppy drive, LAN, USB • Dielectric unit with automatic demineralization system • Chiller Year of manufacture: 2018

Condition: like new (used), CNC: FAGOR 8055 (retrofit option with Heidenhain Tnc640) Spindle diameter: 110 mm Tool holder taper: ISO 50-7388/1 - DIN 69871 Milling arbor mounting diameter: 221.44 mm Tool clamping force: 1,600 daN Travel Spindle horizontal stroke (Z-axis): 550 mm Spindle vertical stroke (Y-axis): 1,500 mm Table traverse stroke (X-axis): 3,000 mm Column longitudinal stroke (W-axis): 1,300 mm Ledpfx Aaexukfqonshr Table Size: 1,500 x 1,220 mm Maximum load capacity: 4,000 kg Max contouring torque: 250 daN T-slots: No. 7, 22 mm, H7 Rapid table rotation: 3 rpm Table clamping torque: 674 daN Speeds and feeds Spindle motor power: 22 kW Speed ranges: 2 Max torque low range: 105 daN Max torque high range: 31 daN Spindle speed range: 15 - 3,000 rpm Constant torque, low range: 15 – 203 rpm Constant torque, high range: 50 – 680 rpm Constant power, low range: 203 – 895 rpm Constant power, high range: 680 – 3,000 rpm Working feedrates: 2 – 10,000 mm/min Rapid feedrates: 10,000 mm/min Maximum axis thrust: 1,600 daN Tool magazine Number of tools: 60 Chain pitch: 140 mm Max tool diameter: 138 mm Max tool diameter (adjacent pockets empty): 400 mm Max tool length (excluding taper): 400 mm Max allowable tool weight: 30 kg Tool holder taper: ISO 50-7388/1 - DIN 69871 Overall weight: 24,500 kg Machine dimensions (L x W x H): 5,350 x 4,770 x 3,700 mm Machine equipped with: • Brushless motors • Through-spindle coolant • Quill stiffener • Heidenhain linear scales • Operation and maintenance manuals

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 920 mm, table length: 3,000 mm, table width: 1,700 mm, spindle speed (max.): 6,000 rpm, HURCO WinMax Dual CNC TRAVELS Longitudinal travel: 3.200 mm Transverse travel: 2.100 mm Vertical travel: 920 mm WORK AREA Table dimensions: 3.000 x 1.700 mm Table load capacity with uniform distribution: 11.000 kg SPINDLE Lhsdoxtqtlepfx Aansr Maximum spindle power: 60 kW (1 min) Maximum spindle torque: 570 Nm at 1.000 rpm (1 min) Maximum spindle rotation speed: 6.000 rpm Tool holder: ISO 50 DIN 69871 Machine complete with: • 40-station tool magazine • Digital motors and drives (axes and spindle) • Thermal conditioning system for headstock temperature control • Coolant system with supply around the spindle • Water wash gun and water gun Compressed air • Chip evacuation system consisting of a double auger and evacuator • Complete enclosure • Instruction manuals and CE declaration

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, table length: 1,200 mm, table width: 1,000 mm, spindle speed (max.): 18,000 rpm, table load: 3,000 kg, CNC Heidenhain TNC 640 TRAVELS Longitudinal travel: 1,750 mm Cross travel: 1,400 mm Vertical travel: 800 mm A-axis travel: ±185° Feed rate: 35,000 mm/min Acceleration: 6 m/sec² WORK AREA Table size: 1,000 x 1,200 mm Table load capacity: 3,000 kg Table rotation speed: 20 rpm Distance between table and spindle nose: 205–805 mm Maximum horizontal clearance: 1,430 mm Working surface height from the floor: 855 mm ELECTROSPINDLE Power up to: 22 kW Torque up to: 99 Nm Maximum spindle speed: 18,000 rpm Maximum power at: 2,150 rpm Tool holder: HSK A63 TOOL CHANGER Number of tools: 30 Max tool diameter with adjacent pockets occupied: 90 mm Max tool length: 300 mm Max tool weight: 10 kg Tool change time: 15 sec DIMENSIONS Maximum height: 4,200 mm Base module dimensions: 5,650 × 3,350 mm Lsdpfx Ajxtqq Rjanohr Occupied area: 22 m² Total weight: 20,000 kg Machine equipped with: • 5-axis universal milling head with Direct Drive and continuous movement of both bodies • 30-position tool changer • Left-side chip conveyor • Various tooling • No. 1 magnetic table • Instruction manuals and CE declaration Year of construction: 2015

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 4,000 rpm, SELCA 4045 CNC Ljdpfxjxtqqde Aanjhr TRAVEL Longitudinal travel: 6.000 mm Vertical travel: 2.000 mm Transverse ram travel: 1.200 mm SPINDLE Motor power: 30 kW Spindle head taper: DIN 69871-B ISO50 Speed: 4.000 rpm FEEDS AND RAPID TRAVELS Maximum working feed range: 5.000 mm/min Rapid travels: 15.000 mm/min Maximum axis thrust on cutting tool: 11.000 N

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, turning length: 560 mm, turning diameter: 220 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 170 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 560 mm, overall weight: 4,900 kg, Fanuc 32i CNC – Model B WORKING RANGE Max. workable bar diameter: 45 mm Max. Machinable length: 220 mm Maximum workable length: 560 mm Maximum rotating diameter: 580 mm MAIN SPINDLE Maximum rotation speed: 5.000 rpm Spindle nose: ASA 5" Spindle bore: 52 mm Internal bearing diameter: 90 mm TAILSTOCK Tailstock taper: CM 5 with CM4 reduction B-axis rapid traverse: 15 m/min TURRET Number of positions: 12 Tool shank for external/internal: 20 x 20 mm – 25 x 25 mm – Ø32 Rotation time (1 position): 0.15 sec DRIVE TOOLS Number of positions: 12 Maximum rotation speed: 4.000 rpm Motor power: 3,7 kW Motor torque: 47 Nm C-AXIS Minimum programmable value: 0,001° Maximum rapid traverse speed: 100 rpm AXES X-axis travel: 170 mm Z-axis travel: 560 mm Y-axis travel: + 55 / – 50 mm B-axis travel: 490 mm X-axis rapid traverse: 20 m/min Z-axis rapid traverse: 24 m/min Y-axis rapid traverse: 6 m/min COOLANT Tank capacity: 250 l Lhjdpfxjxqhake Aaner Pump flow rate: 230 l/min Pump motor power: 1.5 kW DIMENSIONS – WEIGHT Overall dimensions with chip conveyor: 4.240 x 2.000 x 2.020 mm Height of spindle center: 1.000 mm Weight with chip conveyor: 4.900 kg Equipment Machine: • 3-jaw Autoblock chuck, diam. 210 mm • Various motorized modules (axial + radial) • Operation and maintenance manuals and CE declaration of conformity

Condition: excellent (used), functionality: fully functional, grinding length: 2,000 mm, grinding width: 700 mm, total length: 5,760 mm, total width: 1,770 mm, grinding height: 500 mm, grinding wheel diameter: 457 mm, table length: 2,400 mm, table width: 600 mm, space requirement length: 5,760 mm, space requirement width: 1,770 mm, WORKING CAPACITY: Max grinding length: mm 2.000 Ljdpfxewdxd No Aanohr Max grinding width: mm 700 Max grinding height: mm 500 TABLE: Length of the fixing grooves: mm 2.400 Useful dimensions of the support surface: mm 2.000 x 600 Dimensions and distance between the three T-slots: mm 14 x 200 Max longitudinal stroke: mm 2.130 Continuously adjustable speed: m/min 2 ÷ 35 GRINDING WHEEL: Normal dimensions (diam. x hole): mm 457 x 203 Normal width: mm 100 Speed with 50 Hz motor: rpm 960 Max transverse stroke: mm 600 Intermittent transverse feeds: mm 1 ÷ 10 Adjustable transverse movements in continuation: m/min 0.1 ÷ 6 Automatic vertical feeds: mm 0.005 ÷ 0.05 MISCELLANEOUS: Overall dimensions: mm 5.760 x 1.770 Weight: kg 9.300

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, spindle bore: 20 mm, CNC Fanuc 32i MACHINE CONCEPT Number of linear axes + C axes + B axes: mm 5 + 1 + 0 Number of spindles: 2 Number of channels: 2 MAIN SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 3.7 / 2.2 Lsdowifrkopfx Aanshr Torque (S2 30 min/S1): Nm 23.6 / 14 COUNTER SPINDLE Maximum bar passage: mm 20 Number of revolutions: rpm 10,000 Power (S2 30 min/S1): kW 2.2 / 1.5 Torque (S2 30 min/S1): Nm 7.0 / 4.8 WORK AREA Z1 stroke: mm 60 Tool holders 1 stroke X1 / Y1: mm 50 / 325 Counter spindle stroke X2 / Z2: mm 220 / 170 Rapid speed on linear axes X1, Z1, X2, Z2/Y1, Y2: m/min 32/32 Acceleration of linear axes: m/s2 5 TOOL HOLDERS ON SLIDE 1 Fixed turning tools: 6 Tools for frontal and secondary machining: 6/3 Driven tools: 2 + 2 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 2 / 1.3 Power (S3 40% / S1): kW 1.3 / 0.8 Torque (S3 40% / S1): Nm 3.5 / 3 TOOL HOLDER ON SLIDE Y2 Fixed/motorized tools for secondary machining: 4/0 Maximum number of revolutions: rpm 6,000 Power (S3 40% / S1): kW 1.2 / 1 Torque (S3 40% / S1): Nm 2.5 / 2

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 450 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 32 mm, travel distance Z-axis: 450 mm, spindle motor power: 20 W, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, bar diameter (max.): 51 mm, CNC Fanuc 16i WORKING AREA: Max rotation diameter: mm 500 Rotation diameter above transverse guide: mm 300 Transverse travel (X): mm 160 Y-axis travel: mm +-32 Longitudinal travel (Z): mm 450 MAIN SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Bar capacity: mm 51 Front bearing diameter: mm 100 Power (40/100% ED): kW 20/16 Torque (40/100% ED): Nm 200/155 Rotation speed: rpm 20-6,000 COUNTER SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Spindle bore: mm 37 Front bearing diameter: mm 75 Power (40/100% ED): kW 9/7.5 Torque (40/100% ED): Nm 57/48 Rotation speed: rpm 20-6,000 FEEDS: Z-axis rapid: m/min 45 X-axis rapid: m/min 60 TOOL TURRET: Number of motorized tool stations: 12 Power (40/100% ED): kW 10 Torque (40/100% ED): Nm 20 Rotation speed: rpm 5.000 Machine complete with: • No. 03 radial motorized modules • No. 02 universal motorized modules Ledpewhkm Rofx Aanshr • No. 3 fixed tool holders • Self-centering main spindle Autoblok diam. mm 210 • Self-centering counter-spindle Autoblok diam. mm 160 • Instruction manuals and CE declaration Year of construction: 2004

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, table width: 1,100 mm, table load: 10,000 kg, table length: 3,200 mm, workpiece weight (max.): 10,000 kg, WORKING RANGE Ledow H Snxjpfx Aanshr Longitudinal X: 3000 mm Transversal Y: 1400 mm Vertical Z: 1500 mm TABLE Dimensions 3200 x 1100 mm Capacity 10 tons KOSMO 4000 ISO 50 BI-ROTATIVE INDEXING HEAD Rotation speed: 4000 rpm Power: 24 kW Tool taper: DIN 69871 Indexed head with oil lubrication Positions on the rear table: 144 (2.5° step) Positions on the front table: 120 (3° step) RAPID TRAVEL SPEED X-Y-Z: 20 m/min ACCESSORIES SUPPLIED: • SELCA 4045D CNC • 40-station tool changer • Electronic handwheel SELBOX remote control • 4 magnetic chucks, 1000 x 400 mm • 1 vice • Approximately 30 ISO 50 cones • Chip conveyor • Instruction manuals and CE declaration