Used Testing Press for sale (35,340)

Year of construction: 1973, condition: used, functionality: fully functional, 25/11/2025 Capacity: 1600 tons Slide stroke: 630 mm Slide stroke to the extreme bottom position where the press develops its rated capacity: 7 mm Number of continous strokes per 1 min: 16 Max. number of single strokes per 1 min: 12 Max. distance between bolster plate and slide: 810 mm Adjustment: 220 mm Table (bolster plate) dimensions: Left to right: 1600 mm Prsdpfx Aewynaljb Ijd Front to back: 1600 mm Slide dimensions: Left to right: 1600 mm Front to back: 1600 mm Window in upright dimensions: Left to right: 1650 mm Height: 1550 mm Main motor: 110 kW Dimensions: Length: 4670 mm Width: 4670 mm Height above floor level: 8110 mm Machine weight: 140000 kg

Condition: excellent (used), Shelf press Manni 2500×1300 Shelf length: 2500 mm Shelf width: 1300 mm Press with 4 hydraulic cylinders Prjdexyvykjpfx Ab Ied Shelves heated by water from central heating

Condition: ready for operation (used), Year of construction: 2016, General Data Machine weight 4000 kg Prjdpfx Aoxc Rcxsb Ijd Main Drive Pressing force 400 kN Stroke 200 mm This Bystronic Xpert 40/1030 was manufactured in 2016. A robust press brake with a working length of 1030 mm and pressing force of 400 kN. It features a max stroke of 200 mm and is powered by a main motor of 7.5 kW. Ideal for precise bending operations. Contact us for more information. Application Types Bending

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Podsxgpaqepfx Ab Ijrd Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: press, veneer press, pneumatic press Pjdpfjxzppbox Ab Ijrd Reference: R-D1618

Condition: excellent (used), Machine is in a very good condition, works with no problem at all! Podpfx Aboim Si Rj Iord Feel free to come and inspect machine under power upon appointment!

Condition: excellent (used), Year of construction: 2008, operating hours: 3,520 h, functionality: fully functional, briquette diameter: 65 mm, Equipment: emergency stop, Briquetting Press Höcker Polytechnik - Model Brik Star C11-18 - Year of manufacture 11/2008 - Throughput capacity 130 - 160 kg/h - Operating hours 3520 - Motor 11 kW - Operating manual - Conical discharge with auger - Additional oil cooler Prjdpexztgdofx Ab Ijd - Light barrier - Test run on site possible upon request

Condition: excellent (used), total width: 1,300 mm, total length: 3,500 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport width: 1,600 mm, transport height: 2,350 mm, transport length: 4,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Predpfx Ajxxpgbob Ijd Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Year of construction: 2007, condition: ready for operation (used), General Data Machine weight 2000 kg Psdoxx Dztjpfx Ab Isrd Main Drive Number of axis 2 This BRUDERER BSTA 25 was manufactured in 2007. A high-speed precision stamping press, it features a vertical main ram for precise stamping and a horizontal feed mechanism for workpiece positioning. Ideal for sheet metal forming, stamping, pressing, and metal shaping, it operates at high speeds with computerized control. Compact design ensures space-saving installation. Consider the opportunity to buy this BRUDERER BSTA 25 metal press. Contact us for more information. Application Types Forming

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm Prjdpfewyc H Tsx Ab Ijd - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm stroke 400 mm Prsdexz Hfmjpfx Ab Isd dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Machine light Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: used, Heidelberg KSB Cylinder Automatic die cutting machine Psdpfjxz D Dasx Ab Isrd Max Sheet Format: 40 x 57 cm (approx. 15.75 x 22.44 inches) Min Sheet Format: 12.5 x 15.0 cm Speed: Approx. 5,000 sheets/hour Weight: ~3,500 kg

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm Pjdpfx Aev Srfdob Iord - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: excellent (used), Year of construction: 1952, Robust workshop machine with character – manufactured in the renowned German factory A. Nothelfer & Söhne Ravensburg. Year of manufacture: 1952, but still fully operational, complete, and ready to work! - Siemens-Schuckert Motor • Power: 0.8 kW • Speed: 1,400 rpm • Power supply: 3-phase 220/380V • Current: 3.5/2 A • Frequency: 50 Hz • Cos φ: 0.8 - Technical condition • Fully mechanically operational • Belt drive with three-phase motor • New supporting frame with mounting holes • Foot pedal control • Electrical inspection recommended (older visible power system) Predpow E I Sfefx Ab Iod - Additional information • Original nameplates • Type designation illegible, but identified by factory serial number 134058 • Work table with slots for fixture mounting • Solid, heavy construction – built for decades of use • Weight: 480 kg - Applications: stamping, punching, cutting, bending metal parts – ideal for the workshop, forge, tool production, or for an industrial machinery collection.

Year of construction: 2002, condition: ready for operation (used), Main Drive Spindle motor power 11 kW Prodpfx Aoxx Dz Hsb Isd Stroke 110 mm This SEYI SN1-110 was manufactured in 2002. It is a mechanical C-frame crank press with a 110 tons capacity and a stroke of 110 mm. The machine offers an adjustable speed range of 35–65 SPM, a maximum die height of 350 mm, and a main motor of approximately 11 kW (15 HP). Contact us for more information about this machine. Application Types Stamping

Condition: good (used), functionality: fully functional, Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MP Model: 7092513 Type: HES16MP Prsdpfxoumk Naj Ab Isd General: Display: 0-400kp/cm2 / 0-25Mp

Condition: used, Year of construction: 2015, pressure 30 t throat 250 mm table-size 650 x 500 mm Prjdpsw D Hiaefx Ab Iod stroke 400 mm dayligth min. 120 / max. 500 mm Control Simatic HMI Touch Siemens total power requirement 13 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 2,5 x 1,70 x 2,85 m Setup mode and single stroke operating mode Two side tables with a support surface of 850x500mm with hydraulic ball bars for heavy workpieces

Condition: used, Year of construction: 1999, functionality: fully functional, One color Front panel 11 mios impressions NP device DDS dampening Podexz Dufepfx Ab Ijrd

Year of construction: 2022, condition: new, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW Psdpfjimwp Ssx Ab Iord CE certificate Production 2022 Machine available on request New machine

Condition: excellent (used), Steinel PHK 8Ø manual press in very good condition. Psdeum Hu Sepfx Ab Ijrd

Year of construction: 2018, condition: ready for operation (used), General Data Measurements height 2650 mm Dimensions Machine Length 3400 mm Main Drive Pressing force 784.53 Kn Podpfjxx Du Hsx Ab Ierd Number of axis 4 Movement X-Axis Movement 500 mm This 4-axis HILALSAN Cap 2080 hydraulic press was manufactured in 2018. It features a pressing force of 80 tons, a bending width of 2600 mm, and motor power of 7.5 kW. The machine includes a stroke length of 205 mm and a throat depth of 310 mm. If you are looking to get high-quality bending capabilities, consider the HILALSAN Cap 2080 machine we have for sale. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Hydraulic Press, HARE 6 HP, Used Machine Prjdpoxxiybsfx Ab Ijd Manufacturer: Hare Model: 6 HP Overall Dimensions: Width: 960 mm Depth: 1160 mm Height: 2000 mm Table Size: 570 x 290 mm Stroke Length: 100 mm Clearance: 460 x 290 mm Working Pressure: 6 tons (60 kN) Year of Manufacture: 2005 Electrical Data: 400V; 3 kW Air Pressure: 5.5 bar Weight: 620 kg

Year of construction: 2023, condition: new, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Pedpfxsiypzlj Ab Isrd Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2023 Machine available on request New machine

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, General Data Machine weight 6400 kg Measurements height 2810 mm Measurements depth 2140 mm Main Drive Number of axis 6 Bending length 3060 mm Stroke 300 mm Pressing force 1000 Kn Prjdpfx Ajxyl Nnsb Isd Movement X-Axis Movement 600 mm Y-Axis Movement 300 mm Dimensions Machine Length 4175 mm This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information Application Types Bending

Condition: ready for operation (used), Year of construction: 2019, General Data Prsdpfx Abexzlrfo Iod Measurements height 1200 mm Dimensions Machine Length 20000 mm This STROMAB SL3 laminating press was manufactured in 2019. It features a working area with lengths from 3,000 mm to 20,000 mm, a height of 1,200 mm, and a maximum beam width of 200 mm. Equipped with three vertical cylinders per meter, each cylinder exerts a force of 7,200 kg at 200 bar. It includes an integrated hydraulic power unit with independent pressure adjustments. Contact us for more information about this machine. Application Types Pressing / Laminating