Used Testing Press for sale (21,782)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Bdodpfxew Sgnko Airoi Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Bjdpfx Aexfl Axjiredi Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 1974, Vulcanizing Press Mapelli T60 Manufacturer: Mapelli Type: T60 Year of manufacture: 1974 Operating voltage: 380 V Frequency: 50 Hz Control panel: Integrated temperature controllers and operating modules Heating control: Three separately adjustable temperature zones Main switch: Present Manual/automatic operation: Selectable via control panel Safety features: Emergency stop Pressure display: Analog manometer Press area: Vertical closing unit with upper and lower heating plates Construction: Robust steel design Bsdpfx Aox Exndsirsdi Application: Vulcanizing and pressing of molded parts The Mapelli T60 vulcanizing press is a heavy-duty industrial press designed for reliable and uniform vulcanization processes. The robust housing made of solid steel ensures high stability and longevity. The clearly arranged control panel allows for precise adjustment of heating temperatures, operating modes, and pump functions. Three digital temperature controllers enable precise regulation of the heating plates, ensuring reproducible results during vulcanization. The vertical pressing mechanism offers a solid support and closing unit, ideal for molded parts and various materials. The machine features an integrated safety circuit including emergency stop, as well as an analog pressure gauge to monitor the pressing process. Due to its industrial design, the Mapelli T60 is excellently suited for continuous operation and offers an economical solution for companies requiring robust vulcanizing technology. No guarantee is given for the accuracy, completeness, or currentness of the information provided.

Condition: used, Year of construction: 1987, pressure 800 t stroke 100 mm no. of strokes 45 /min distance between columns 600 mm Bdjdpfjzl E Sasx Airji table surface area 560 x 650 mm capacity of ejector 5 t ejector stroke 15 mm ram surface 590 x 450 mm power requirement 22,0 kW Weight 17,0 t dimensions (WxDxH) 1,7 x 2,55 x 3,1 m Nominal force travel 1,46 mm With knuckle-joint drive, flywheel brake, hydraulic clutch with 2nd brake, press frame balancing, single ejector in table, self-monitoring control

Condition: used, total length: 3,600 mm, total width: 2,000 mm, total height: 2,800 mm, Year of manufacture: 2001 Bodpezwvrzsfx Airodi Colour: Red Weight: 5.500 kg Price: On request - Year: 2001 - Documentation available: Yes - CE marking present: Yes - Serial number: HFE50-20LV010254 - Drive system: CNC - Control system brand: Amada - Control system type: Operateur 2 CNC - Power [kW]: 6.0 - Number of axes [pcs]: 8: Y1+Y2+X1+X2+R1+R2+Z1+Z2 - Press force [ton]: 50 - Max. working width [mm]: 2090 - Column gap [mm]: 1665 - Throat depth [mm]: 400 - Max. stroke [mm]: 350 - Punch holder: Quick-release - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3600mm x 2000mm x 2800mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Capacity - 2t/h Bsdpfez I S Svsx Airedi Pellet press - ZEPPI 132 Kw Year - 2014 Exellet condition !

Condition: used, Year of construction: 2006, operating hours: 22,000 h, functionality: fully functional, EQUIPMENT FOR TRANSPORT AND MANIPULATION OF RAW MATERIALS The equipment consists of:  Mercedes Actros container truck  Two containers with a volume of 10 to 20 m3 for sawdust  Liebherr bulk loader Equipment condition:  In good condition EQUIPMENT FOR THE PREPARATION OF RAW MATERIALS The equipment consists of:  Waste bin with movable floor - volume approx. 10 m3  Pneumatic transport systems with filter  Conveyor belts and augers  Sawdust dryer with biomass burner  Hammer mill for chopping wood chips with associated equipment  Control cabinets for each piece of equipment Capacity of the complete plant:  About 2 t/h of dried sawdust Equipment condition:  Completely overhauled BRIQUETTING PRESS WITH SAW AND PACKING UNIT Bsdpjz I Tm Uofx Airedi Full capacity is 3,5T/h A complete briquetting line consisting of the following:  Briquetting press BP6000 CFN consisting of: o Silos for raw materials o Dosing screw o Oil and press head cooling system o Original press head and cooling line for briquettes with a diameter of 90 mm for hardwood o Manual and automatic control system o Current condition: the press has been 100% serviced and all vital parts of the press have been changed so that it is like new ones o Large quantity of spare parts in stock including spare axle and eccentric  Saw for cutting briquettes BRIDGE o Current condition: the equipment has been fully serviced  Automatic packaging machine for briquettes ROSMAN o Current condition: the equipment has been completely serviced and a new control cabinet has been made

Condition: excellent (used), Year of construction: 2004, Briquetting press. Bdjdpfsz I U Igsx Airoi

Condition: like new (used), Heidelberg GTOZ-S52 offset printing machine The machine is ready to work, very good condition, purchased from small printing house. Technical data: Format: 36x52cm 2 printing units Weight: 3000kg Power supply: 400V Year of production: 1994 Baldwin alcohol dampening Bedpfsz E A I Asx Airsdi Control panel Documentation and additional elements included.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS General Bdjdpfs Adu Ekjx Airoi Quantity: 4 units Machine type: Mechanical stamping presses Manufacturer: Predominantly Berg & Schmid (?) MACHINE DETAILS Dimensions Length: 300 mm Width: 200 mm Height: 300 mm Weight Weight: 20 kg

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. Bdjdpfx As Ad Iy Ieiroi (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 1981, pressure 030 t throat 250 mm stroke 100 mm table-size 500 x 400 mm max. distance table - ram 320 mm ram surface 350 x 220 mm hole in the table 130 x 100 mm Bjdpfx Ais Ad Rlmersdi total power requirement 5,5 kW weight of the machine ca. 2 t dimensions of the machine ca. 1,8 x 1,6 x 2,5 m Fabricated construction with light guard and two hand switch.

Condition: used, Weiss Type: WT-1300/70/15 Weiss temperature testing chamber, water-cooled with touch panel control Data for temperature tests: Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate: Heating: 15 K/min Cooling: 10 K/min Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature homogeneity spatially: ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm, Width: 1100 mm, Depth: 1330 mm External dimensions: Height: approx. 2050 mm, Width: approx. 1300 mm, Depth: approx. 3200 mm Permissible test item weight: Total load on the test chamber floor: 150 kg Load per insert shelf: 50 kg Data according to the nameplate: Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Data for operation: Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 63 A Rated power: 44 kW Refrigerant: R404A: 14.0 kg R23: 5.4 kg Maximum permissible pressures: R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment: Touch panel control Stainless steel test chamber Multiple insertion levels Side access Heated door seal Bdodpfeza Dv Iox Airji Water-cooled refrigeration unit CEE connector CE marking available Weight: approx. 1500 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of delivery: (See image) Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, functionality: fully functional, Solid Wood Press for Sale! Manufacturer: Societa Italiana Macchine Idrauliche, Milan (Italy) • 5 hydraulic cylinders at the top • 4 hydraulic cylinders at the bottom Bdedpfoz Azqtjx Airoi • Working area: approx. 2.5 x 1.3 m • Mechanical/hydraulic control (no automation) • Good visual condition; well-maintained. FULLY FUNCTIONAL ✅

Condition: ready for operation (used), Konica Minolta Bizhub 6120p with 6.9 million prints, fully equipped, tested, and ready to print. Equipment: - PF 710 - RU 510 - FS 532 KONICA MINOLTA ACCURIOPRESS 6120 HIGH-PERFORMANCE BLACK & WHITE DIGITAL PRODUCTION PRESS ONLY 6.9 MILLION PRINTS – JUST 10% OF ITS RATED LIFETIME! The Konica Minolta AccurioPress 6120 is an extremely reliable, heavy-duty digital production press, designed for intensive, high-volume printing. KEY PERFORMANCE FIGURES: Printing speed: 120 pages/minute Maximum monthly volume: 2.5 million prints Bedpozh Hn Ijfx Airjdi Rated machine lifetime: 70 million prints Preventive maintenance: every 1 million prints Drum & developer replacement: approximately every 1.2 million prints EXCEPTIONAL REMAINING POTENTIAL! With only 7 million prints, this machine has used just 10% of its rated lifetime, leaving 90% remaining production capacity – approximately 63 million prints, subject to proper maintenance. An exceptionally robust and reliable digital press, offering outstanding productivity and long-term value. As an experienced retailer of used copiers, we have developed significant expertise in packing and pallet/container shipping to guarantee our customers receive machines in perfect condition. Our company offers the largest range of production copiers and handles worldwide deliveries upon request. Please do not hesitate to contact us for further information.

Condition: used, Heavy-duty pneumatic gluing press with perforated sheet metal for flexible positioning of the press cylinders. One cylinder without a pressure shoe. Bodpszryy Ejfx Airedi Technical data: - Pressing area: approx. 2,800 x 1,000 mm - Width: 600 mm - Height: 1,800 mm - Press cylinders: 6

Condition: like new (used), functionality: fully functional, working width 3000 mm Bdedpszn Iqwjfx Airei working height 2500 mm year of manufacture 1995 engine power 7 kW weight 2500 kg power supply 380 V side cylinders and gearboxes adjustable from the control panel safety switch – shear pin CE marking

Condition: used, total length: 4,100 mm, total width: 1,900 mm, total height: 3,000 mm, Year of manufacture: 2000 Colour: Blue Weight: 20.000 kg Price: On request - Year: 2000 - CE marking present: Yes - Serial number: 80960 - Drive system: CNC - Control system brand: HACO - Control system type: BC50 Graphics - Power [kW]: 22.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 300 - Max. working width [mm]: 3600 - Column gap [mm]: 3100 - Throat depth [mm]: 500 - Backgauge depth [mm]: 850 - Max. stroke [mm]: 250 - Crowning system: Mechanical - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4100mm x 1900mm x 3000mm (l x w x h) Bedpfjzmaa Iex Airjdi - Transport weight [kg]: 20000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Höcker Polytechnik frequency-controlled extraction system with an RSN ECO 40/12 briquetting press, designed to extract wood shavings and sanding dust from a small to medium-sized joinery or other woodworking workshop, complete with a connected hopper and briquetting press. Includes heat recovery and a number of extraction pipes with pneumatic dampers, suitable for equipping a workshop with approx. 5–10 machines. Technical data: - Fan 1: 11 kW - Fan 2: 3 kW - Press: 4.5 kW - Filter bags: 50 - Briquette: ~ 60 x 40 mm - Filter area: ~ 54 m² Bdodjztvwispfx Airei - Air flow rate: ~ 3,200 m³/h

Condition: excellent (used), Year of construction: 2008, Well-maintained used press brake from SafanDarley. Type EHP LS 230 43 37 Bdsdpfjz S H Hdjx Airsi Capacity: 4300 x 230 tons New Delem DA69T control system CNC-controlled Y1, Y2, X, R, Z1, and Z2 axes Hydraulic Wila New Standard top clamp Pneumatic Wila 13mm bottom clamp.

Condition: used, Year of construction: 2001, pressure 200 t table surface area 1600 x 1300 mm ram stroke 600 mm dayligth 900 mm die cushion capacity 80 t die cushion stroke 150 mm die cushion area 1200 x 750 mm distance between columns 1650 mm Bdsdsz St Izopfx Airji table height over floor 1060 mm ram surface 1600 x 1300 mm oil volume 1400 l height over floor 3500 mm rapid drop speed 400 mm/sec drawing speed 42 (80 to) mm/sec drawing speed 20 (200 to) mm/sec return speed 325 mm/sec Control Siemens total power requirement 75 kW weight of the machine ca. 20 t Machine is with cushion in table (80 t), light guards and Siemens control for presses.

Condition: good (used), functionality: fully functional, Year of construction: 2003, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Model: TrumaBend V170 Year of manufacture: 2003 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat width (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Bjdps Acm E Hsfx Airjdi Oil tank capacity: approx. 95 liters Hydraulic cylinder diameter: 190 mm Machine dimensions and weight: Total weight: approx. 18,000 kg External machine dimensions (W x D x H): approx. 5,000 x 2,210 x 3,100 mm. The machine is offered without tooling.

Condition: used, WEISS TECHNIK Climate testing chamber / Temperature testing chamber / Climate chamber Weiss Umwelttechnik WK-180/70/5 Temperature range -70 °C to +180 °C Test chamber volume approx. 190 liters Water-cooled – Temperature and humidity testing system For sale is a used climate testing chamber from the manufacturer Weiss Umwelttechnik GmbH, model WK-180/70/5. Bjdpfx Ae Abbidsirsdi The climate testing chamber was developed for carrying out temperature and climate tests. It is suitable for the testing of materials, components and electronic parts under different temperature and humidity conditions. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: WK-180/70/5 Type of equipment: Climate testing chamber / Temperature testing chamber Design: water-cooled Test chamber volume: approx. 190 liters Country of manufacture: Germany Temperature data: Temperature range: -70 °C to +180 °C Temperature change rate according to the manufacturer: Heating: approx. 7.5 K/min Cooling: approx. 7.5 K/min Climate data according to the manufacturer for the WK series: Climate temperature range: +10 °C to +95 °C Relative humidity: 10 % to 95 % r.h. Humidity control for climate tests The specifications for the temperature change rates and the climate range are the manufacturer's stated values. The actual performance depends on the operating and test conditions. Refrigerant circuit: Refrigerant 1: R404A Fill quantity: 2.50 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Fill quantity: 0.75 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Refrigerant and fill quantities according to the nameplate. An up-to-date leak test certificate is not included in the available documentation. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 21 A Test chamber: Test chamber volume: approx. 190 liters Internal dimensions (W × D × H): approx. 580 × 450 × 750 mm Test chamber with viewing window Metallic shelves / grid trays Test specimen feed-throughs Dimensions / Transport: External dimensions (W × D × H): approx. 870 × 1,285 × 1,775 mm Weight: approx. 460 kg Dimensions according to the manufacturer's drawing. Weight according to the manufacturer's specifications without options. Actual dimensions and weight may vary depending on the equipment. Equipment: Climate testing chamber with temperature and humidity control Water-cooled cooling system Electronic temperature control S!MCON / 32 control unit of the series External control panel Viewing window Test chamber lighting Metallic shelves Lateral test specimen feed-through Multi-stage refrigeration system Electrical power connection Industrial housing with adjustable feet Equipment according to the pictures Application areas: Temperature tests Climate tests Environmental simulation Material testing Electronics and component testing Aging and stress tests Quality assurance Research and development Product and component testing Workshop inspection from 15.10.2026: Measured temperature change Heating: approx. 9.7 K/min Measured temperature change Cooling: approx. 12.1 K/min Condition & Notes: Used Optical condition according to the pictures Scope of supply: 1 × Weiss Technik WK-180/70/5 climate testing chamber External control panel Existing shelves Existing connection components Otherwise, scope of supply as shown in the pictures. Collection or shipping by forwarding agent possible by arrangement. Loa

Condition: used, Year of construction: 1985, machine/vehicle number: ARP-250, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 250 t, stroke length: 125 mm, total length: 2,500 mm, total width: 3,000 mm, total height: 4,500 mm, overall weight: 25,000 kg, Single-column (C-frame) eccentric press Ivo Lola Ribar ARP-250, 2,500 kN, for sale. The press has been completely overhauled, is regularly maintained, is in very good mechanical and functional condition, and is ready for immediate operation. Inspection under power is possible by appointment. Technical data (as per nameplate): Nominal force: 2,500 kN (250 t) Stroke: 40–190 mm, adjustable Ram adjustment: 125 mm Strokes per minute: 40 min⁻¹ Bsdpfx Aio Af Na Ajredi Max. sheet thickness: 24 mm Distance table–ram (stroke down): 300–425 mm at 190 mm stroke, 375–500 mm at 40 mm stroke Year of manufacture: 1985 Equipment: Hydraulic die cushion Pneumatic clutch-brake T-slot table Central lubrication Air tank with service unit Separate electrical cabinet with control Dimensions and connection (approx.): Table size: approx. 1,380 x 880 mm Ram face: approx. 1,200 x 800 mm Table height above floor: approx. 800 mm Drive power: approx. 22 kW Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 24 t Dimensions (L x W x H): approx. 2.5 x 3.0 x 4.5 m Location: Slovenia Delivery terms: EXW Price: EUR 22,000 net

Condition: good (used), Year of construction: 2005, machine/vehicle number: 1151, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 125 mm, total length: 2,050 mm, total width: 1,440 mm, total height: 3,220 mm, overall weight: 8,000 kg, Single-column (C-frame) eccentric press Gorenje Indop 100 t, manufactured in 2005 and CE-marked, for sale. The press is currently in production use, fully functional, and can be inspected while running. Technical data (as per nameplate): Nominal force: 1,000 kN (100 t) Stroke: 20–125 mm, adjustable Ram adjustment: 80 mm Distance table–ram (ram at BDC): 310–390 mm at 125 mm stroke, 362–442 mm at 20 mm stroke Year of manufacture: 2005 CE marking Serial no.: 1151 Equipment: Adjustable stroke via eccentric bushing Bjdpfe Af Nh Rox Airjdi Motorized ram adjustment with position indicator Hydraulic unit (overload protection) Movable two-hand control console with emergency stop Flywheel drive T-slot table Separate electrical cabinet Power supply: 400 V, 3-phase AC, 50 Hz Weight: approx. 8,000 kg Dimensions (L x W x H): 2,050 x 1,440 x 3,220 mm Location: Slovenia Delivery terms: EXW Price: EUR 12,000 net Weight and dimensions are approximate values and must be verified by the buyer before transport.