Used Traveling Column Machining Center for sale (69,291)

Condition: used, Technical details: x-travel: ca.1000 mm y-travel: 400 mm z-travel: 420 mm control: Siemens Sinumerik 805/810 thread cutting up to max.: M 22 bore capacity in St 60 - full boring: 25 mm milling area: Leistung in St 60:150 mm sawing stroke: ca. 55mm mm range of revolutions per minute - continous: 20-6000 U/min Number of working hours: manual 26180 h tool turret: 12 Plätze/places tool taper: SK 40 total power requirement: 18 kVA weight of the machine ca.: 5,0 t machine dimensions LxWxH: 2,9x2,5x2,8 m transport measurements machine: 2,4x2,6x2,75 m Equipment: - special equipment/device ( modulating clamping system) for milling jobs of profile materials with an automatic longtitudinal cutting to length device for workpieces via circular saw module. (without functionality) - hotrizontal tool clamping ( force fitted) with vise clamping system and parallel ledges.(momentarily approx. 80mm) Dedpfx Adju Idnmsdocr - tool changer type Chiron - basket tool changer - tool clamping mechanically locked, infeed force 5000N - swarf conveyor make Knoll - loading and unloading system FMB LM RP 3000 The machine is not fuctional. On sale as is for a small budget i.D. *

Condition: used, Year of construction: 2002, Technical details: x-travel: 560 mm y-travel: 510 mm z-travel: 510 mm control: Fanuc MSX 501 MAPPS III spindle drive: 22 kW spindle speeds: 12000 U/min rapid travel x/y/z: 42 mm/min Number of tool station: 40 BT40 max. tool weight: 12 kg tool changing time: 1,3 sec Pallet dimension: 2x 400x400 mm table load: 0,5 t working diameter: max. 610 mm total power requirement: 56 kVA weight of the machine ca.: 8,7 t dimensions of the machine ca.: 2,9x4,1 m Accerories Chip conveyor Coolant through spindle 70 bar with filter Table probe for tool breakage and length measuring Tactile sensor for workpiece measuring Dsdpfx Aexz D Raeddecr Air Filter

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, table load 1814 kgs, Spindle Speed 7500 rpm, Djdpfx Ajx D Ulmeddjcr Spindle taper BT40, Spindle Motor 30Hp, HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger,

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,200 kg, table width: 1,350 mm, table length: 600 mm, spindle speed (max.): 8,000 rpm, VERTICAL MACHINING CENTER DMG MORI NVX5100/50 YEAR 2015 ERGOline (Mitsubishi M730UM-B) Table: 1350x600 mm Dsdpfx Ajx Axdkeddscr Axes travel: X:1050 Y:530 Z:510 mm 8,000 rpm, BT50, ATC30 Chip conveyor Automatic tool length measurement Workpiece setup detection

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 750 mm, Hartford Pro 1000 – Vertical Machining Center (2006) For sale: A well-maintained Hartford Pro 1000 vertical machining center from 2006. The machine has seen only light production use and has been serviced on a regular basis. Ideal for precision machining, prototyping, and small to medium batch production. Technical Specifications Year of manufacture: 2006 X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 630 mm Table size: 1,200 × 600 mm Spindle speed: 8,000 rpm (BT40 taper) Tool changer: 24 stations CNC control: FANUC HARTROL AI300 Spindle motor power: approx. 11–15 kW Machine weight: approx. 6,000–6,500 kg Cooling system: Flood coolant, through-spindle coolant, coolant tank with pump Condition • All axes move smoothly without abnormal noise • Spindle operates properly with no overheating • Control electronics are fully functional • Regular maintenance performed; filters changed routinely • Machine available for trial machining Included Equipment • Optional BT40 toolholders (subject to separate agreement) • Chip conveyor • Coolant tank with pump • Work lights, full guarding, documentation/manuals Dedpfx Adox Dx Hnsdecr Availability & Logistics The machine is available for immediate delivery and is ready for loading. Transport, loading, installation, and commissioning can be arranged within Finland or internationally.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, We are selling a CNC machine. Price 36000. Dcjdpfxjw Rnl Io Adder We also have a complete line for the production of PVC and aluminum windows and doors

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 Dcsdpfxou Idn Ho Adder distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: used, Year of construction: 2006, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel length X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Worktable TV with 10 supports L=1500 4 working zones 2 cross lasers Vacuum pump 250 m³/h PC control Windows Vertical milling unit ISO 30 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dcodpfx Adoxy Tmzsdjr Dongle for XILOG software Location: Nattheim

Condition: ready for operation (used), Operation in X, Y, Z axes Djdpfx Adsx An Avedecr Horizontal drills on X-axis – 10 pcs Horizontal drills on Y-axis – 2 pcs Vertical drills on Y-axis – 14 pcs Vacuum pump 3 kW Capability for dual-field operation 6 beams Milling unit 2 work zones 3000 kg Year of manufacture: 1992

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 Dcedpotvf Htjfx Addor - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT K2 Numerically controlled machining center ROVER A 3.40 FT K2 Working fields: X = 3685 mm; Y =1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum Pump 300 m3/h 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowingunit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS BIESSE NEST Module Air conditioner for electric cabinet Inverter Dcsdpfox Afvtjx Adder Safety devices with mats (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2015, 1 used portal machining center Manufacturer: Haas Model: Gr 510 Year of manufacture: 2015 Technical details X-axis: 3073 mm Y-axis: 1549 mm Z-axis: 279 mm Control: HAAS Table size: 3099 x 1346 mm Total power requirement: 11.2 kW Machine weight approx.: 9.2 t Shipping dimensions: 5.5 x 2.9 x 2.9 (3.2) m Space requirements approx.: 6 x 3 x 3 m Dsdpexzifvofx Addjcr Additional information 4th axis NC rotary table with tailstock and swiveling bridge

Condition: excellent (used), Year of construction: 2023, operating hours: 1,260 h, functionality: fully functional, Doosan Puma DNM 5700 Control system: Heidenhain TNC 620 Clamping area of table: 1300x570 mm Travel X-axis: 1050 mm Dsdpfxjw Tni Ej Addjcr Travel Y-axis: 570 mm Travel Z-axis: 510 mm Spindle speed: 0 - 12,000 rpm Number of driven axes: 4 Coolant pressure: 20 bar Spindle taper: SK 40 Max. load of table: 1,000 kg Tool magazine: YES Number of magazine positions: 30 Machine weight: 6,500 kg Measurement probe Operating hours: 1,260 h

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Storage Location: Supplier Dodpexy Tmnjfx Addscr

Condition: good (used), Year of construction: 2001, operating hours: 5,000 h, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, Controller ULTIMAX4 DSM Double screen Table size 762 x 510 mm Table load max 1350 kgs X travel 610 mm Y travel 510 mm Z travel 610 mm Spindle speed 10000 rpm Spindle taper SK40 Spindel power 9,4/11 kW Dedpfx Ajxwmgijddscr Weight 4300 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories - Coolant unit - Chip auger - SW options: pocket islands, rigid tapping, DXF, Ultipro - machine mounths Under power in our showroom in Hungary. Very nice condition.

Condition: used, Year of construction: 2002, Burkhart & Weber MCX 900 – 4-Axis Machining Center - Siemens SINUMERIK 840D CNC control - Double pallet changer, pallet at loading station rotatable, total pallets: 6 - Rack-type tool magazine with 264 tool positions and tool setup station for loading during runtime - Rapid traverse X/Y/Z: 40 m/min / B-axis: 20 rpm - Max. machining force X/Y/Z: 20 kN / Tangential torque B-axis: 20,000 Nm - Renishaw wireless probing system - Year of manufacture: 2002 Technical Data Working ranges: - X-axis: 1,600 mm - Y-axis: 1,400 mm - Z-axis: 1,500 mm - B-axis: 360° / 0.001° Speeds: - Spindle speed: 20 – 6,000 rpm - Gear ranges (2): 20–1,400 / 1,401–10,000 rpm Feed rates and forces: - X/Y/Z-axis rapid traverse/feed: 40,000 mm/min / 20,000 N - B-axis speed/torque: 20 rpm / 20,000 Nm Tool magazine: - Magazine type: rack magazine - Number of tools: 264 Tools: - Max. tool weight: 60 kg - Max. tool length: 560 / 750 mm - Tool holder: DIN 69893 / HSK A-100 - Tool clamping force: 40 kN Pallets: - Pallet size: 800 x 1,000 mm - Pallet changer: double - Pallet weight: 800 kg - Max. allowable pallet weight: 3,150 kg - Pallet design: T-slots - Workpiece loading station: manually rotatable (4 x 90°) Coolant system: Dedexxbbwopfx Addscr - Internal coolant (through tool): 30 l/min / 50 bar - External coolant: 200 l/min / 4 bar Drive power: - S1 operation 100% duty cycle: 37 kW - S6 operation 40% duty cycle: 50 kW Electrical: - Voltage: 3 x 400 V / 50 Hz +10% - Control voltage: 230 V AC / 24 V DC - Rated current: 130 A - Connected load: 65 kW / 75 kVA Hydraulics: - Tank: 240 l - Pressure: 60 bar Pneumatics: - Pressure: 4 – 6 bar - Consumption: 10 m³/h

Condition: like new (used), Year of construction: 2023, functionality: fully functional, We are offering for sale a beautiful 5-axis machining center MAZAK VARIAXIS C-600, suitable for simultaneous machining. The machine has very few, if any, spindle hours and was manufactured in 2023. Technical Data: - Travel: X: 650 mm, Y: 550 mm, Z: 530 mm - B-axis - C-axis - Table / pallet size: Ø 600 mm × 500 mm pallet table (standard) - Max. workpiece size: Ø 730 mm × height 450 mm - Spindle speed: 18,000 rpm (SK40) - Control: Smooth Ai Dimensions: W: 2,350 mm, L: 2,962 mm, H: approx. 3,039 mm Machine Equipment: SPECIAL ACCESSORIES - Work table surface with T-slots 650 x 500 mm - Chain magazine with large capacity for 60 tools SAFETY EQUIPMENT: - Preparation for detachable handwheel Dodjxz Dp Ajpfx Addocr COOLANT SUPPLY: - High-pressure coolant supply 15 bar through spindle / 35 l/min - High-pressure coolant interface 70 bar (European interface) CHIP MANAGEMENT: - Preparation for chip conveyor with left-side discharge - Chip conveyor MT10 with hinged belt design - Chip cart SMOOTH Ai CONTROL OPTIONS: - Smooth synchronous tapping - Rapid traverse at constant tilt angle - 5-axis tool radius compensation 5-Axis Machining Package for MAZATROL SmoothAi This option includes: - EIA/ISO 5-axis simultaneous machining - Spline precision interpolation (EIA) - Tool tip control / 5-axis - 5-axis spline interpolation - NOXXX path error suppression

Condition: used, Year of construction: 2008, travel distance X-axis: 1,700 mm, travel distance Y-axis: 1,400 mm, controller manufacturer: MAZAK, controller model: PC FUSION 640 M, CONTROLS .. CNC controls MAZAK PC FUSION 640 M WORKING RANGE -CUBIC- .. X-axis travel: 1700 mm .. Y-axis travel: 1400 mm .. Z-axis travel: 1400 mm TABLE .. - positioning/indexing: 360000 ° SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. drive power: 37 kW TOOL MAGAZINE .. number of positions: 120 AUTOMATIC WORKLOAD EQUIPMENT .. store type: pallet changer .. number of store positions: 6 .. pallet length: 1000 mm .. pallet width: 1000 mm .. number of pallets: 6 A high-quality Mazak FH 10800 is available for sale, equipped with a 6-fold pallet storage system, ideal for automated machining processes and high production output. The machine is in very good condition and is available immediately. With a large travel range, powerful spindle and extensive equipment, this horizontal machining centre is particularly suitable for demanding machining tasks in mechanical engineering or series production. NC4 laser Dcjdpexzbrbofx Addjr Renishaw OMP60 probe Synchronised thread cutting Removable handwheel CNC performance package Mayfran Concep chip conveyor with drum filter 70 bar high-pressure pump

Condition: used, Year of construction: 2012, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm CNC-control HEIDENHAIN TNC620 table-size 1200 x 560 mm max. table load 1000 kg spindle taper SK 40 Dedpfx Adow A Spvsdecr spindle turning speed range 10.000 U/min drive capacity - spindle motor 13 kW feed stepless 20.000 mm/min rapid traverse 25 m/min tool change unit 20 Pos. coolant IKZ 20 bar voltage 400 V total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 2,55 x 2,30 x 2,25 m chip conveyor 3,90 x 0,95 x 1,60 m - Serial No.: 1539000377A - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Pass-through height. Operator terminal: 24" LED color display. Handheld terminal for controlling axis speeds. Software: "Woodflash". Vacuum pump 90 m³/h, 50 Hz or 108 m³/h, 60 Hz. Milling spindle 12 kW HSK F63 (12,000 rpm). 12-position linear tool changer on the left side of the machine frame + pickup position. Drilling head DH 16 4H 2S: Vertically 12 spindles, horizontally 4 spindles, 2 grooving saws. Storage location: Supplier. Dsdpfexy Tlwsx Addecr

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The machine is in good technical condition. X-axis travel: 900 mm Y-axis travel: 500 mm Z-axis travel: 450 mm 4 axes Control: Fanuc FS31i Spindle speed: 20-20,000 rpm Table: - External length: 1,000 mm - External width: 500 mm - Maximum table load: 1,000 kg New electric spindle installed 4 years ago. Tool magazine for 30 tools, incl. tool holders. The machine operated in single-shift operation. Inspection under power possible by prior arrangement. Dedpfx Ajx Dazysddjcr

Condition: used, Year of construction: 2012, CNC Machining Center Manufacturer: Unverzagt Model: UVA 550 Plus Year of manufacture: 2012 Control: Siemens 828D Operating hours: approx. 3,000 Travel (X/Y/Z): 600 x 400 x 500 mm Tool stations: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon wireless probe Chip conveyor Dcodpfxowv Tm Ns Addor Spindle cooler ICS (internal cooling system)

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel length: 150 mm · Clearance height: 120 mm Drilling Unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm available as an option) · Power: 2.2 kW · Grid: 32 mm · Drill holder: M10 with 11 mm positive fit · Pneumatic feed stroke: 60 mm Grooving saw unit in "X": · Integrated in the drilling head · Grooving saw blade with a maximum diameter of 120 mm Main milling unit: · Tool interface HSK 63F · Speed: 1,500 – 24,000 rpm, infinitely variable via inverter · Motor power: 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power: 7.5 kW (10 HP) from 12,000 rpm (S6) · Right-/left-hand rotation · Ceramic bearings · Prepared for use with angle drives Tool changer TR10: Automatic lateral tool changer for 10 tools. · Number of tool positions: 10 · Maximum tool diameter: 120 mm · Maximum weight per tool: 4.5 kg · Maximum total tool weight: 28 kg A central extraction port collects all processing units into a single connection with D=200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. TVF worktable: The worktable is designed to provide the operator with maximum "freedom of movement." The vacuum quick-clamping system offers maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports, L=1100 mm, infinitely adjustable in X · 12 TVF vacuum cups 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 left / 1 right) · 1 stop in Y per support (total 4 pcs.) · Retractable reference stops controlled via CNC Automatic central lubrication: The correct amount of lubricating grease is distributed via an electronic CNC control unit (X, Y, Z axes) Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. negative pressure (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files Dcedjxy Ndispfx Adder - Import of ASCII files - User interface in operator’s native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction port Ø: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Negative pressure: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L=1,100 mm and 18 vacuum cups 120x120 mm Cross lasers for vacuum cup positioning Two cross lasers mounted on the unit carrier allow for easy positioning of the vacuum cups. Location: Nattheim

Condition: good (used), Year of construction: 1990, CNC Machining Center Manufacturer: MORI SEIKI Model: Partner M300 A-1 Year of manufacture: 1990 Control: FANUC O-M Travel paths X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis): 25 – 325 mm Distance between spindle nose and pallet table (Z-axis): 125 – 620 mm Rapid traverse speed: 24 m/min Feedrate up to 5 m/min Spindle: Ballscrew diameter: 36 mm Feed drives: FANUC AC, X/Y-axis Model 5, Z-axis Model 10 Main spindle speed: 100 – 6,000 rpm Main spindle motor: AC 5.5 kW Main spindle taper: BT 40 Pallet: Pallet size: 315 x 315 mm Pallet indexing angle: 7.5 degrees Indexing accuracy: ±2 seconds Repeatability: ±1 second Clamping force of pallet: 3,400 kg Maximum workpiece weight: 150 kg Automatic tool changer: Number of tools: 30 Tool change time: 2.5 seconds Dcedot Rg E Sjpfx Addjr Collet clamping time: 7 seconds Maximum tool diameter: 110 mm Maximum tool length: 250 mm Maximum tool weight: 8 kg Special accessories: Work completion indicator with warning light Magazine for 30 tools Operating hours counter Tool life monitoring Coolant system Work area lighting Weight: approx. 4,500 kg Footprint: 1,900 x 2,300 mm

Condition: good (used), Year of construction: 2003, Machining Center Manufacturer: Matsuura Model: H Plus 405 PC6 Year of manufacture: 2003 CNC Control: Fanuc G-Tech 16i Travel X/Y/Z: 600 x 600 x 600 mm Table size: 500 x 500 mm 6-fold pallet changer Tool magazine: 120 positions 4th axis Knoll high-pressure system Internal cooling 70 bar Dcjdpjltlx Nsfx Adder