Used Turret Rewinder for sale (1,957)

Year of construction: 2026, condition: as good as new (ex-display), Features: → Robust machine housing made of cast material → Automatic loading and unloading of the test force Csdpfec Ipckjx Abhshd → Automatic switching between objective and indenter → LED illumination → Digital measuring eyepiece → LCD color display with touchscreen → Conversion to other hardness scales (e.g. HRC/HB) → Simple operation Technical Data: → Test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000) → Testing method according to Vickers (HV0.01 - HV1) → X/Y cross table 110 x 110 mm / travel range 25 x 25 mm → Eyepiece 10X → Automatic objective turret → Objectives 10X / 40X / 60X → Max. sample height 90 mm → Max. sample depth 110 mm → Compliance: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 50 kg → Power supply 230V / 50Hz Scope of delivery: → Hardness testing device → Diamond indenter 136° → X/Y cross table 110 x 110 mm → Eyepiece 10X → Objective turret → Objectives 10X / 40X / 60X → LED illumination → Power cable → Accessory case → Operating manual OPTIONAL → VMS3 software (Video Measuring System) → Digital built-in measuring screw (for transmitting the edge distance to the VMS software) → "Automatic measurement" module (only in conjunction with VMS3 software) → PC system / monitor → Delivery/commissioning/calibration & training

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2026, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 9,060 mm, color: silver, Equipment: ABS, = Additional Options and Accessories = - Rear doors = Notes = Complete with: - 10mm aluminum floor - Remote control - Small turret in the front wall - Rotatable crossmember - Smartboard - Stainless steel boxes - 6x round tail lights For more information, contact Mark van der Steen. = Additional Information = General Information Year of construction: 2026 Cedpfsz Hcy Isx Abhohd Registration number: OX-85-BP Axle Configuration Tire size: 385/65R22.5 Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tire tread depth left: 80%; Tire tread depth right: 80% Rear axle 2: Max. axle load: 9000 kg; Tire tread depth left: 90%; Tire tread depth right: 90% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 60%; Tire tread depth right: 60% Weights Unladen weight: 8,060 kg Payload: 33,940 kg GVW (Gross Vehicle Weight): 42,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 02/2027 Technical condition: very good Optical condition: very good Additional Information Please contact Mark van der Steen for further information.

Condition: reconditioned (used), Year of construction: 2018, functionality: fully functional, CNC turning machine GILDEMEISTER CLX 350 V3 With DMG MORI SLIMline Multi Touch Fanuc I series control Year of manufacture: 2018 Turning diameter: 320 mm Travel in X: 242 mm Travel in Z: 540 mm Spindle bore: 65 mm Speed range: 20 – 5000 rpm With the following accessories: Sliding safety shield with interior lighting 12-station turret with 12 driven tool stations VDI 30 C-axis, tailstock with quill Programmable tailstock via M function Tool measurement in the work area Electronic handwheel Chip conveyor 3-jaw chuck, hydraulic, Schunk ROTA THW plus 0 210 mm Foot switch for chuck adjustment Parts catcher Glass scale in the X axis Codpfx Abozd Dlpjhjhd Coolant system with high-pressure pump 12 bar Coolant spray gun Operating manuals

Condition: ready for operation (used), Year of construction: 2015, operating hours: 42,222 h, spindle speed (max.): 5,000 rpm, bar diameter (max.): 65 mm, total width: 1,990 mm, total height: 2,300 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, overall weight: 9,500 kg, controller manufacturer: FANUC, controller model: 310, product length (max.): 4,500 mm, number of axes: 8, This 8-axis DMG MORI Sprint 65 linear was manufactured in 2015. It features a maximum workpiece diameter of 175 mm and a maximum bar diameter of 65 mm. The machine is equipped with two turrets, each with 12 driven tool positions, and offers a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the DMG MORI Sprint 65 linear multi-spindle turning machine we have for sale. The machine comes with a large and valuable set of spare parts and components. Contact us for further details. Control system: CNC 310 isTotal hours: 61295 hOperating hours: 42222 hMain spindle power 20/25 kWCounter spindle power 17 kWMax. main spindle speed: 5000 rpmMax. counter spindle speed: 5000 rpmMax. main spindle bar diameter: 65 mmMax. counter spindle bar diameter: 45 (65) mmCNC CONTROLLED AXESStroke X1 165 mmRapid speed X1 30 m/minAcceleration X1 5 m/s2Stroke Z1 678 mmRapid speed Z1 30 m/minAcceleration Z1 5 m/s2Stroke Y1 80 (+50/-30) mmRapid speed Y1 30 m/minAcceleration Y1 5 m/s2Stroke X2 165 mmRapid speed X2 30 m/minAcceleration X2 5 m/s2Stroke Z2 640 mmRapid speed Z2 30 m/minAcceleration Z2 5 m/s2Stroke W2 690 mmRapid speed W2 30 m/minAcceleration W2 5 m/s2Number of turrets 2Number of rotating tools each station 12 all driven positionsTool system VDI 30Max driven tool speed 4.000 rpmApprox. coolant tank capacity 650 lCoolant pump max.capacity (per each turret) 20 l/minPump pressure 7 barPower supply 91 kVALxWxH of the machine 4.500x1.990x2.300 mmApprox. machine weight 9.500 kgThe machine comes with a large and valuable set of spare parts and components.IEMCA MASTER 865 MP 43 L (4m) bar feederBase machine configuration:- Drive for slide 1 and 2 (all 12 pos.)- C-axis for main and counter spindle- Y-axis for slide 1- Swarf conveyor belt type- Counterspindle collet cleaning with coolant- Workpiece unloading including belt- Mechanical preparation for oil mist filter- Electrical and software interface for bar loader- Angular synchronism between main and counter spindle- Automatic machine shut down- 2 additional on/off outputs (4 M-functions)- Rigid tapping- Piece and time counter- Software for polygonal turning for slide 1 and 2- Constant cutting speed- Helical interpolation for slide 1- Spindle speed control- Quadruple warning light- Cooling device for electrical cabinetEquipment:Collet chuck Type MPF 65/140 without axial feed for main spindle max. diameter: 65mm.Manual collet changerDifferential pressure for counterspindle, possibility of setting two different clamping pressures.Chuck type "SMW 175-BBD" For counter spindleTool holders as visible on the turretsControl system options:I-V12060 Tool wear monitoring system Monitor for CNC FANUCI-V12070 Sister tool selection system for Tool Monitor for CNC FANUCHydraulic and filtration equipment:I-V40045 External flushing of jaws/collets with coolant on main spindle and counter spindleSpecial optionsSK001 Special clamping device with mandrel for counter spindle product HAINBUCH AXFIX 811 including 2 collets Chedpfxezhklws Abhjd Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 800 mm, spindle motor power: 26,000 W, spindle speed (max.): 4,000 rpm, spindle bore: 91 mm, travel distance X-axis: 370 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 4,000 rpm, feed length X-axis: 25,000 mm, feed length Y-axis: 15,000 mm, feed length Z-axis: 30,000 mm, total height: 2,574 mm, total length: 3,930 mm, total width: 2,280 mm, spindle nose: A2-8, overall weight: 9,100 kg, Equipment: documentation/manual, The Mori Seiki NZX 2500/1000Y is an extremely robust and versatile CNC turning machine, designed for companies that demand high levels of productivity, accuracy, and flexibility. The machine is equipped with a Y-axis, which, in addition to conventional turning operations, enables complex milling and drilling operations. In combination with powered tools, this offers extensive possibilities for completely machining workpieces in a single setup. The two turrets provide a large tool capacity and enable simultaneous operations. This makes the NZX 2500/1000Y particularly suitable for complex workpieces and series production. Additional options & accessories: - Double turret configuration (Turret 1 and Turret 2) - Y-axis - Powered tools - Interface for bar feeding Cjdpfxez R T Exo Abhshd - SMW Autoblok (SLU-X-2_ZS) hydraulic chuck - Renishaw measuring arm for tool measurement on Turret 1 and Turret 2 - High-pressure pump - HAINBUCH SPANNTOP nova Kombi Axfix Gr. 65 chuck - Various tool holders (powered and static) - All original Mori Seiki documentation Weight & dimensions: 9100 kg approx. 3930x2280x2574 mm (LxWxH)

Condition: excellent (used), Year of construction: 1985, Control: Philips B2T Swinging diameter: 640 mm Machining diameter, longitudinal: 550 mm Machining diameter on the turret: 450 mm Turning length: 1000 mm Spindle speed: 2,240 rpm Cedpfx Abo Adl N Tohshd Spindle bore: 103 mm 12-position turret, VDI 60 Chip conveyor

Condition: reconditioned (used), functionality: fully functional, The ANSELMI Monofap EA 260×1000 parallel lathe shown, used and RECONDITIONED, is a traditional, medium-sized lathe: Chsdo Adrn Nepfx Abhed center height 260 mm – distance between centers 1000 mm – swing over carriage 320 mm – swing in gap 670 mm – spindle bore C.L. 6 – spindle diameter 270 mm – spindle power 10 HP – spindle speed 20-1400 rpm – bar capacity 55 mm – type B turret – bed width 370 mm – tailstock – tailstock taper c.m. 4; The machine has been reconditioned in the axes, in the general mechanics, and in the electrical system, and has been brought up to current standards. Shown with 3 axes, fully equipped with steady rest, sets of chucks, sets of tool holders, tools, etc.; condition and equipment as per the photos.

Condition: good (used), Year of construction: 2003, For sale 1 CNC training/production lathe CHALLENGE Omitechnique (FAGOR): Technical Specifications (Manufacturer's Plate) - Brand / Model: Challenge Omitechnique (Original base: OTA-1640A) - Manufacturer: Buffalo Machinery Company Limited (Made in Taiwan) - Year of manufacture: March 2003 - Numerical Control (CNC): FAGOR control cabinet - Power supply: 400 V / Three-phase (3Ø) / 50 Hz - Main motor power: 5.5 kW (14.6 A) - Total power: 13.4 kW (18.15 A) - Machine weight: 2,050 kg Included equipment & Configuration - Chuck: 3-jaw concentric chuck installed (Bison brand, high quality) - Turret: Quick-change tool holder (Multifix type) with its clamping handle - Tailstock: Manual, currently equipped with a drill chuck and a drill bit - Coolant system: Blue articulated hose for cutting fluid, directed towards the tool - Lighting: Integrated light bar under the upper fairing - Safety: Emergency stop buttons (on the Fagor control and the front frame), protective fairing for the work area Csds Af Af Ujpfx Abhjhd Do not hesitate to contact me for any additional information.

Condition: good (used), Year of construction: 2004, General information: • Manufacturer: Edale Ltd. (UK) • Model: Sigma • Year of Manufacture: 2004 • Condition: Very good, regularly serviced • Availability: Immediately Technical Specifications: • Printing units: 8 x UV flexo o Configurable as 8 front-side or 4 front + 4 reverse • Die cutting units: 2 • Web Width: 510mm • Conversion Options: Roll-to-roll and roll-to-sheet • Turn bars: 2 (for front/back printing) • Register Control: Included • Drying System: UV curing on all units • Inspection: Camera-ready setup possible • Applications: Labels, films, flexible packaging, paper and carton • Included Accessories: Magnetic cylinders, printing cylinders, anilox rollers • Unwinder: Included • Rewinder: Included Additional details: • The machine is fully operational and has been well maintained. • Ideal for short to medium production runs with high flexibility. • All documentation available. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) Chodpfx Abjwmfzgehjd • Optical: 8/10 (cleaned and ready for immediate end-user deployment) _____

Year of construction: 2000, condition: good (used), General information: • Brand: Rotoflex • Model: VLI 510 • Year of Manufacture: 2000 • Condition: Good working condition • Availability: Immediately Technical Specifications: • Web Width: 510mm • Functions: Chedpfewmfztsx Abhjd o Slitting o Rewinding • Rewind Diameter: Up to 700mm • Unwind Diameter: Up to 750mm • Core Sizes: 3" • Slitting System: Razor blade • Minimum Slit Width: 12mm • Web Path: Roll to roll • Counting Options: Label and length counting • Drive System: Servo driven • Web Guiding System: Included Application: Ideal for slitting and rewinding of self-adhesive labels, films, foils, and other flexible materials. • Condition: Regularly serviced and well-maintained _____

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 180 mm turning length: 490 mm swing diameter: 450 mm cross travel: Z-Weg: 168 mm control: Traub TX8D revolution per minute: 20 - 4000 U/min spindle passage: Ø 60 mm operating hours - idle run: 23.495 h tool turret: 12 tools total power requirement: 38 kW Weight approx.: 4,2 t dimension machine xH: 3,6 x 2,5 x 2,2 m Tool holder straight shank DIN 69880 (VDI 3425) Ø 40x63 Röhm lathe chuck Ø 200mm hydraulic clamping Operation via double foot switch and control panel/operating panel. Coolant device The Traub carries an integrated chip conveyor with an ejection height of 1,100mm (currently without function). Accessories: multiple small parts 8 x machine feet Chedpfx Abou Ix N Sohod without tailstock i.D. *

Condition: good (used), Year of construction: 2018, spindle speed (max.): 3,500 rpm, overall weight: 6,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Main parameters: Controller: FANUC 0iD/31iA Chuck.: SAMCHULLY 10" Spindle bore: 86mm With jacket tube.:78mm Turret head: 12 main positions 12 secondary positions, BMT65 connection, Programmable hydraulic tailstock: MT5 Main spindle power: 22kW S1max=3500 1/min Living tool power: 5.5kw S2max=5000 1/min X movement range: 260mm Chedowtg Injpfx Abhod Z axis movement range: 830mm Y axis movement range: + - 52mm (104mm) C axis Maximum turning length: L=760 Largest turning diameter: D=376mm Fast travel speed: 30m/min Automatic tool measurement with probe arm Weight: 6000 kg

Condition: ready for operation (used), Year of construction: 2008, operating hours: 58,985 h, spindle speed (max.): 6,000 rpm, travel distance X-axis: 185 mm, travel distance Z-axis: 385 mm, overall weight: 3,500 kg, number of axes: 2, Horizontal turning machine manufactured in 2008. This Mazak Quick Turn Nexus 100-II features a maximum turning diameter of approximately 280 mm and a turning length of about 335 mm. It includes a 12-position drum turret and a programmable tailstock. Known defects: Spindle fault: Alarm "44 SPINDEL ERROS 3" - Machine must warm up before machining, then operational. Repair costs according to quote approx. 2,800 EUR. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Nexus 100-II machine we have for sale. Contact us for further details regarding this machine. Turning Length: Approx. 335 mm (Z-travel approx. 385 mm) - Turning Diameter: Max. turning diameter approx. 280 mm - Swing Diameter: Approx. 550 mm - Number of Turrets: 1 turret, 12-position drum turret (Bolt-on type) - Tool Holder / Mounting: Mazak block mounting (Bolt-on), various tool adapters and tool holders included - Tailstock: Available (Programmable) - Main Spindle: Without C-axis - Main Spindle Speed: 6,000 rpm - Spindle Nose: A2-5 - Spindle Bore: Approx. 61 mm - Main Drive Power: Approx. 11 / 7.5 kW - Bar Capacity / Pass-Through: Ø 51 mm (Standard chuck 6" / 152 mm, 3-jaw hydraulic) - Optional (not included): Various tool adapters and holders, clamping equipment, Hainbuch clamping technology - Chip Conveyor: None - Documentation: Available - Demonstration Status: Operational under power (after warm-up phase) - Known Defects: Spindle fault Alarm "44 SPINDEL STÖRUNG 3" - Machine must warm up before machining, then operational. Estimated repair cost approx. 2,800 EUR. - Machine Weight: 3,500 kg (7,700 lbs) - Main Circuit Voltage: 3AC 400 V 50/60Hz - Control Circuit Voltage: AC 100V / DC 24V - Max Main Motor Voltage: 400 V Technical Specification Chodpfez Rxg Hex Abhed Counter Spindle No Driven Tools No

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, CNC universal lathe GILDEMEISTER NEF 600 V 3 With Siemens 840 D control system Year of manufacture: 2009 Cedpfx Abs Aa Ag Ushshd Swing over bed: 600 mm Swing over cross slide: 410 mm Spindle bore: 90 mm Travel in X-axis: 320 mm Travel in Z-axis: 1250 mm Maximum spindle speed: 3000 rpm Including the following accessories: Sliding guard with internal lighting 12-station turret VDI 40 with 6 driven stations Various VDI 40 tool holders Tailstock with quill Collet chuck Hainbuch with 2 collets Foot switch for collet adjustment Coolant spray gun Coolant system Chip tray Operating manuals

Condition: good (used), Year of construction: 2014, Description: Chjdjz S Hnhopfx Abhod The machine is in good technical condition, and a test run is possible upon prior arrangement. It is more suitable for serial production; it also includes a feeder and an output belt for finished parts. It comes with accessories – 2 universal chucks, clamps, and holders. Parameter PUMA MX 1600 ST Max. machining / turning diameter: 330 mm Recommended turning diameter: 170 mm Max. machining length: 900 mm Diameter over bed: 680 mm Diameter over carriage: 630 mm Bar diameter: approx. 51 mm Standard chuck: 6" Main spindle – speed: 6,000 rpm Main spindle – power: 15 / 11 kW Max. torque of main spindle: approx. 208 Nm Spindle nose: A2-5 Tailstock – speed: 6,000 rpm Tailstock – power: 15 / 11 kW Tailstock – nose: A2-5 Milling spindle: 12,000 rpm Power of milling spindle: 9 kW Torque of milling spindle: approx. 49 Nm Y-axis: 170 mm (??85 mm) B-axis: ??120?? / range 240?? X1: 450 mm Z1: 935 mm X2: 165 mm Z2: 925 mm Tool magazine: 40 positions Max. tool Ø: 70 / 95 mm Max. tool length: 200 mm Tool change time: approx. 2.1 s Lower turret: 16 positions, BMT45 Driven tools of lower turret: 6,000 rpm Power of driven tools: 5.5 kW Control system: Fanuc 31i-A Weight: approx. 11,600 kg Dimensions: approx. 3,800 × 2,530 × 2,760 mm

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 266 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: HEIDENHAIN, controller model: Plus 4110, number of axes: 2, Horizontal turning machine manufactured in 2003. This DMT Kern CD480 features a main drive power of 17 kW and a total power requirement of 25 kW. Including tool turret with 12 positions and various VDI30 holders. If you are looking to get high-quality turning capabilities, consider the DMT Kern CD480 machine we have for sale. Contact us for further details. - Control Unit Model: Heidenhain Manual Plus 4110 (Type: BFT 121 G / LE 412 M) - Voltage / Frequency: 400 V / 50 Hz - Nominal Current: 45 A - Control Voltage: 24 V DC - X-Axis Feed Motor: 4.0 Nm (3000 rpm) - Z-Axis Feed Motor: 6.0 Nm (3000 rpm) - X-Axis Software Limit: -30.50 mm to +235.0 mm - Z-Axis Software Limit: -115.0 mm to +982.0 mm - Operating System / Software: Win98 4.10.2222, IPLC 41HD467 Technical Specification Counter Spindle No Driven Tools No Chjdpfx Ajz Sp Rlsbhed

Year of construction: 2007, condition: ready for operation (used), - USED - 8-AXIS CNC LATHE WITH MILLING HEAD, DOWN TURRET HEAD AND COUNTER SPINDLE MAX ROTATING DIAMETER: 660 mm MAX TURNING LENGTH: 1495 mm MAX TURNING DIAMETER: 660 mm BAR CAPACITY: 65 - 65 mm SPINDLE: 35-5000 rpm; 22 kW; 254 mm COUNTER SPINDLE: 35-5000 rpm; 18,5 kW; 254 mm HEAD: CAPTO C6 ; -30°+195° ; 15-12000 rpm; 18,5 kW X-AXIS TRAVEL: 580 mm X2-AXIS TRAVEL: 150 mm Y-AXIS TRAVEL: 160 mm Z-AXIS TRAVEL: 1545 mm Z2-AXIS TRAVEL: 1490 mm B-AXIS TRAVEL: 1550 mm RAPID FEEDS X-Y-Z: 38 - 26 - 38 m/min TURRET HEAD: 9 POS TOOL MAGAZINE: CHAIN-TYPE ; 80 POS HIGH PRESSURE COOLANT: 18 Bar Chodpfxjz Sfuhe Abhsd CONTROL UNIT: MAZATROL MATRIX WEIGHT: 11800 Kg OVERALL DIMENSIONS: 5090 x 3270 x 2830 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER ; TOOL SETTER

Condition: good (used), Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Cods Ad Izlspfx Abhjhd Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: used, Year of construction: 2004, CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Csdpjzzwmuofx Abhjhd Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02260002571, The Gildemeister CTX 420 Linear is a powerful and highly precise CNC universal lathe (or turning-milling center) designed for demanding series and mass production. It is particularly characterized by its linear motor technology in the X-axis, which, compared to conventional ball screw drives, ensures extremely high dynamics, rapid positioning, and wear-free operation. Equipment: -Single spindle, three-jaw chuck, 11-position tool turret, automatic tailstock, chip conveyor Control: -Heidenhain Accessories: -Work bench, under-mounted telescopic drawer cabinet (7 drawers) Contents: Hand tools, analog/digital measuring instruments, indexable inserts Attractive offer – flexible & worry-free Codpfxjz N Etke Abhshd We offer you not only a high-quality product but also tailor-made financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together we will find the best solution. Upon request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and on-time process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will advise you personally and competently. Subject to prior sale, changes, and errors!

Condition: like new (used), Year of construction: 2009, operating hours: 26,000 h, travel distance X-axis: 725 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, spindle motor power: 11 W, spindle speed (min.): 5,000 rpm, total length: 3,171 mm, total height: 2,648 mm, total width: 4,254 mm, overall weight: 6,000 kg, CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Cjdpfx Abexf Hlbehohd Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours Under power: 38.000 Cutting Time: 26.000 Basic machine dimensions / weight Length mm: 3.171 Width mm: 4.254 Height mm: 2.648 Weight kg: 6.000

Condition: good (used), Year of construction: 2007, operating hours: 30,000 h, CNC Lathe Hardinge Quest 6/42 SP Technical Data and Scope of Supply TECHNICAL DATA Manufacturer: Hardinge Model: Quest 6/42 SP Year of manufacture: 2007 Control: GE Fanuc 18i-TB Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Machine current: 78 A Spindle drive: 44 A Control voltage: 115/24 V Operating hours: approx. 30,000 h Spindle mount: A2-5 Bar capacity: 42 mm Chuck size: 150 mm Max. workpiece length with collet: 381 mm Max. workpiece length with chuck: 270 mm Max. turning diameter: 309 mm X-axis travel: 89 mm Z-axis travel: 406 mm Rapid traverse X-axis: 28 m/min Rapid traverse Z-axis: 38 m/min Turret: 12 station VDI 30 Indexing time: 0.1 s Machine length: 2,576 mm Depth: 2,025 mm Height: 1,905 mm Weight: approx. 5 t SCOPE OF OFFER Includes (not exhaustive): - CNC lathe Hardinge Quest 6/42 SP - Toolholder set - Chip conveyor - Transformer - Chip tray - Renishaw probe For the exact scope of supply, please refer to the photo documentation. The CNC Lathe Hardinge Quest 6/42 SP with Fanuc 16i/18i/21i control system from 2007 is a high-precision machine designed for a wide range of turning operations. It features a robust A2-5 spindle mount, a 42 mm bar capacity, and a 150 mm chuck, allowing flexible machining of different workpiece sizes. With a maximum turning diameter of 309 mm, even larger components can be machined reliably. The axes provide generous travel ranges of 89 mm (X) and 406 mm (Z), as well as high rapid traverse speeds, ensuring maximum productivity. The 12-station VDI 30 turret with an extremely short indexing time of 0.1 seconds guarantees fast tool changes and minimizes downtime. Thanks to the solid construction and the proven Fanuc control, the Hardinge Quest 6/42 SP is ideally suited for series production with the highest accuracy demands. No guarantee is given for the correctness, completeness or currentness of the information provided. Chsdpfx Aoxflprebhjd

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travels X = 1,450 mm, Y = 700 mm, Z = 550 mm rapid traverse 42 m/min spindle speed range 20 to 14,000 rpm inline spindle with a power of 20.3 kW / 14.5 kW (40/100% load) tool clamping SK40 DIN69871 tool shank according to DIN69872 tool change with a 60-position SK40 magazine Chjdpjylpf Sjfx Abhed (turret with housing and dual gripper) table clamping area 1,760 x 750 mm direct measurement in the X, Y, Z axes Machine is connected and ready for testing.

Condition: good (used), Year of construction: 2005, functionality: fully functional, FOR SALE CNC Lathe Mori Seiki NL2500Y/700 (year 2005) currently available for sale. Sales Notice: CNC Lathe with Y & C axes Mori Seiki NL2500Y/700 (2005) Original Japanese machine (August 2005), rigid, high-performing, and in good overall condition for your precision machining work. Chjdpfx Abj Af A Ayjhjd Main features: - Axes: Y axis (±50 mm) + C axis (high-precision spindle indexing) - Capabilities: Maximum turning diameter: 356 mm | Maximum turning length: 705 mm - Main spindle: Maximum speed 4,000 rpm | Spindle nose A2-8 | 26 kW motor - Turret: 12 tool positions - Numerical control: FANUC CNC - Actual readings: Power-on time: 31,946 hours | Cutting time: 24,441 hours Included equipment: - Lateral chip conveyor - Tailstock with rotating center - 4 single external chairs for the turret (Machine sold without a chip extraction system)

Condition: good (used), Year of construction: 1980, functionality: fully functional, turning length: 1,580 mm, turning diameter: 510 mm, spindle bore: 80 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 6 rpm, travel distance X-axis: 450 mm, travel distance Z-axis: 1,060 mm, rapid traverse X-axis: 10 m/min, rapid traverse Z-axis: 12 m/min, quill travel distance: 130 mm, overall weight: 6,800 kg, spindle nose: M.T. No. 5, Manufactured by Mazak (Japan) Year of manufacture 1980 CNC control: Fanuc 6T Max. swing, mm 510 Standard cutting diameter, mm 305 Distance between centers, mm 1580 Turret travel, mm: X axis 450 Z axis 1060 Chsdox A Tb Djpfx Abhjd Hole through spindle, mm 80 Spindle center, M.T. No. 5 Spindle speed range, rpm 6...3000 Turret rapid traverse, mm/min: X axis 10000 Z axis 12000 Tailstock spindle travel, mm 130 Main drive motor, kW 22 Machine weight, kg 6800