Used Turret Rewinder for sale (1,817)

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, • Model: SIAT L33 150 TC • Machine in very good condition, completely overhauled in 2022. • Machine type: Semi-automatic, three-color flexographic printing press • Color printing: Up to 3 colors • Web width: 150 mm • Printing width: 150 mm • Suitable for: PVC, OPP, Acrylic OPP, cellophane, paper, and reinforced films • Applications: Primarily for printing on self-adhesive tapes • Central impression drum: Heated, with ceramic drums • Rewind: Automatic rewind turrets with automatic coupling of printed tape to empty cores • Corona treatment: Yes • Slitting: By razor blades • Drying: 3 hot air drying tunnels • Speed control: Up to 160 m/min, adjustable via inverter • Maximum roll diameter (unwind): 360 mm Lrsdjxznwkepfx Adwjg • Maximum roll diameter (rewind): 300 mm • Unwinder shaft diameter: 3 inches

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Ljdpfx Adevakdzowsrg Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Lrjdjxq A Hlepfx Adwjg Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: excellent (used), Year of construction: 2018, Converting Line GM 330 FB-D (Hot stamping + Screen printing) Year of manufacture: 2018 Lodpfx Aow I T Ucedwjrg Manufacturer: Grafisk Maskinfabrik Maximum web width: 350 mm Minimum web width: 50 mm Maximum unwind diameter: 700 mm Maximum rewind diameter: 600 mm - Vetaphone Corona Treater - BST Web Guiding System Hot Foil Stamping Unit (Flatbed) Speed: 6,000 impressions/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with 250 mm diameter Substrates: 50–500 µm Plate thickness: 5-10 mm (7 mm standard) Stamping pressure: 30 tons Foil feed in both transverse and longitudinal direction (rotatable turret) Temperature range: 80° - 130° C Heating time approx. 20 min. Screen Printing Unit Speed: 4,000 cycles/h or 5-15 m/min Web width: 110 mm - 330 mm Frame size: 660 mm x 500 mm Frame type: 30 mm x 30 mm aluminum frame Printing area: 330 mm (length) x 330 mm (width)

Condition: used, Year of construction: 2007, 8 color Rotogravure press with aluminum cylinder system/carrier+sleeve Material Width 1100mm Printing width 1010 mm Print repeat 450 to 1000 mm Max speed 250 m/min Type Of Print Drying System: Oil Unwinder Type: Double turret Unwinder Diameter: 1000 mm Rewind Unit Type: Double Rewinder Diameter: 1000 mm 1 single printing unit type QS-PRESS C1 6 QS-PRESS B1 units 1 reversible double printing unit QS-PRESS C2 Solvent-based inks OPG web Guide Lrodpfxew Du Nno Adwjg Pneumatic pumps Gama viscometers Independently controlled printing elements with servo motor in electric axis Solvent concentration control Web video 3000 camera system complete with defect control Automatic lateral and longitudinal register control 380 iron cylinders 750 aluminum cylinders for quick changes 40 carriers (5 sets of 8 pieces) 650 sleeves

Condition: good (used), Year of construction: 2009, MARK ANDY LP 3000 - 10" Ljdsumbl Eepfx Adwsrg We present this Mark Andy LP 3000, Flexopress max format 254 mm / 10', year of manufacture 2009. Machine details:  Year of construction: 2009  Printing process: 6 x flexo printing  Roll width: 254mm / 10'  2 x Die-Cutting  Unwinder  Rewinder  VESTRA TURRET REWINDER  Max. Material web width: 260.35mm / 10.25'  Min. print length: 177.8mm / 7'  Max. Print length: 609.6mm / 24'  Max. Speed: 230 m/min  Drying system: 6 x UV Dryer  Web monitoring: BST Power Scope 3000 mot.  With analog screen on one side  Web break control  Turnbar  Machine dimension: 10,4m x 2,0m The machine is equipped with  Printingcylinder: 6x 68", 74", 80", 88", 100", 120", 124", 132"  Printingcylinder: 3x 90", 104", 2x 110", 112", 7 x 96"  10 x Anilox  Magnetic Cylinder: 80", 88", 96", 100", 102", 104", 108", 110", 112", 120", 124", 132", 134", 136", 148" Technical- and optical condition: Technical: 9/10 (checked and in excellent running condition) Optical: 9/10 (cleaned and can go to end-user directly)

Condition: ready for operation (used), Year of construction: 1999, operating hours: 78,000 h, functionality: fully functional, turning length: 205 mm, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller model: Fanuc 16i-T, number of axes: 9, CNC sliding headstock lathe with 9 axes! TECHNICAL DETAILS Lrodpfox U Af Sox Adweg Axes: X / C1 / Y / E / B / A / X / C2 Maximum bar diameter: 20 mm Maximum turning length: 205 mm / 195 mm Maximum main spindle speed: 10,000 rpm Maximum sub-spindle speed: 10,000 rpm MACHINE DETAILS Control: Fanuc 16i-T Coolant: Oil Tank capacity: 170 L Operating hours: 78,000 h EQUIPMENT 4-position tool holder 3 cross drilling units Turret with 8 stations Various additional tool holders Tailstocks Parts conveyor Bar feeder FMB Turbo 3-26 /3200/A Fire extinguishing system Kraft & Bauer Chip conveyor Mayfran

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 81 mm, turning diameter: 99 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 240 mm, TECHNICAL DETAILS Maximum turning length: 81.3 mm Maximum turning diameter: 99.1 mm X-axis: 300 mm Z-axis: 240 mm Spindle head: A2-6 Spindle bore: 33 mm Variable spindle speed: 4,000 rpm Spindle motor power: 11 kW Number of turret tools: 8 Number of driven tools: 10 MACHINE DETAILS Control: Fanuc 21iT Dimensions & Weight Machine dimensions (incl. chip conveyor): 290 x 235 cm Machine weight: 4,000 kg Transformer station dimensions: 65 x 60 cm Lodpfjx Upv Rox Adwsrg Transformer station weight: 150 kg Overall dimensions (L x W x H): 2,600 x 2,300 x 2,400 mm Total weight: 3,900 kg EQUIPMENT Chip conveyor

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,599 h, functionality: fully functional, machine/vehicle number: MM0018-000095, turning length: 1,540 mm, turning diameter: 760 mm, spindle bore: 86 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 1,585 mm, TECHNICAL DETAILS Turning diameter: 760 mm Turning length: 1,540 mm Travel X-axis: 630 x 220 mm Ljdpjx Updnsfx Adwerg Travel Z-axis: 1,585 x 1,515 mm Travel Y-axis: 230 mm Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1,000 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 positions Tool holder: BMT 65 P, Capto milling head Drive power: 26/22 kW MACHINE DETAILS Total connected load: 100 kVA Dimensions & Weight Footprint: approx. 6.1 x 2.7 x 3.0 m Machine weight: approx. 15.5 t Operating hours Spindle hours: 7,599 h Run time: 47,684 h Power-on time (control): 85,381 h EQUIPMENT Sub spindle 80-position tool magazine Hydraulically actuated hollow clamping device 12-position lower turret with BMT 65 P Chuck air blow-off system spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Internal coolant supply on sub spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-pressure clamping for main and sub spindle Automatic shutdown after end of production Hinged belt chip conveyor 2 x power chucks 250 mm 1 x radial AGW 1 x axial AGW Measuring probe Extended high-pressure coolant system with paper belt filtration Note: For transportation, two Mega Liner semi-trailers with 3 m loading height will be required.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: NTX26200913, turning length: 1,530 mm, turning diameter: 670 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 675 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 40 mm, rotational speed (max.): 4,000 rpm, number of slots in tool magazine: 76, Simultaneous 5-axis machining with direct drive (DDM) in the B-axis HIGHLIGHTS Milling spindle: compactMASTER with the shortest length of 350 mm Machining option: 6-sided complete machining thanks to powerful counter spindle TECHNICAL DETAILS X1-axis travel: 675 mm (+550 / -125 mm) Y1-axis travel: 300 mm (+/-150 mm) Y2-axis travel: +/-40 mm Machining area Maximum machining area: Ø 670 mm x 1,530 mm Control Lrsdpeyap Shefx Adweg Control type: FANUC F31iB5 with CELOS Operation: CELOS - ERGOline Touch Spindle Main spindle: standard spindle Ø 91 mm, 4,000 rpm Counter spindle: Standard spindle Ø 91 mm, 4,000 rpm Chuck Main spindle chuck: Hollow chuck 10", Ø 254 mm Chuck for counter spindle: KITAGAWA 10" hollow chuck BB210A821 Protection: Double foot switch with protective cover for main and counter spindle Travel control: Automatic travel control of the clamping cylinder for the main spindle and counter spindle Turning-milling spindle Spindle (B-axis): Standard speed 12,000 rpm (FANUC) Tool holder: Capto C6 Positioning: B-axis with 0.0001° accuracy for 5-axis machining Tool turret Type: Turret 2 with tailstock function Equipment: 10-station turret for tool holders attached with screws Milling performance: 6,000 rpm, 40 Nm (turret 2, FANUC) Tool magazine Capacity: 76 tools Tool holder: CAPTO C6 Measuring and monitoring Tool presetting: Manual tool presetting device for main and counter spindle, removable (standard) Distance measuring system: Direct distance measuring system in the X, Y and Z axes of the turning-milling spindle Sensor system: Spindle sensor measuring system with radio signal transmission, Renishaw RMP600 Automation Signal lamp: 4-color (red, yellow, green, blue) Interface: For bar feed device (LNS, IRCO, IEMCA, Edge Technologies, multiple) MACHINE DETAILS Machine dimensions (L x W): 5,825 x 2,830 mm Cooling media and chip disposal Chip conveyor: Ejection on the right, hinged belt + Drum filter Coolant: Use of water-soluble cooling lubricants (emulsion) Pressure: High-pressure coolant system with 70 bar Coolant supply: Through the spindle for the tool spindle and lower turret Filter system: Knoll/Interlit Compressed air system Blow-off system: For chucks on the main and counter spindle Oil mist system Oil mist separator: Extraction opening Ø 200 mm, AFS 1600 Filter and cooling system Filter system: INTERLIT TMF300/980 compact filter system, 70 bar Additional pressure: 15 bar for turret II with lifting pump (FANUC/MITSUBISHI) Cooler: INTERLIT auxiliary cooler, 15 kW

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, number of spindles: 2, spindle speed (max.): 6,500 rpm, travel distance X-axis: 840 mm, travel distance Z-axis: 425 mm, Auction of a production line with robot and two workpiece palletizers! TECHNICAL DETAILS Travel distance X: max. 840 mm Travel distance Z: max. 425 mm Spindle speed: 6,500 rpm Workpiece palletizer capacity: 24 workpiece carriers Number of main spindles: 2 Number of tool turrets: 2 Number of tools per turret: 12 MACHINE DETAILS High-pressure pump: up to 120 bar per line Machine weight: 8,000 kg Lrsdpfx Ajyap Nasdwsg Cooling: Spindle and machine bed cooling EQUIPMENT Robot M6iB Workpiece shuttle system by Heilig Automation with 2 pick-up stations High-pressure pump up to 120 bar per line Chip crusher Workpiece palletizer with a capacity for 24 workpiece carriers

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, MORI SEIKI Horizontal CNC Lathe NLX2500Y / 700 (Year 2015) Mitsubishi M730BM (MAPPS) Chuck Size 10" Max. Swing dia. 920mm Turning Diameter dia. 366mm Center Distance 700mm Bar Capacity dia.80 C axis 0.001 degree X Axis Travel 260mm Lrjdox Ty Tdopfx Adwsg Z Axis Travel 795mm Y axis Travel +/-50mm Turret 12 ( 12 rotating Tools) Power Tools 10,000rom Spindle 4,000rpm Tail Stock - programmable Chip Conveyor

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, DMG MORI Horizontal Turning Machine CTX -310V3 ecoline - Year 2010 Ledpfx Adex Ty S Tewjrg Controller : MAPPS (Mitsubishi) Max swing dia.330mm Max swing over slide dia. 260mm Max. Turn dia. 200mm Length 450mm Chuck 8" Turret 12 (6 driven tools) C axis indexing Power driven Tools 4,500rpm Tool setter tail Stock Chip conveyor --- Video upon request

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Lsdowvrfkopfx Adworg Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Chip conveyor Stock Clearance at 39.000EUR ONLY

Year of construction: 2025, condition: new, Also, different models are available. MACHINERY WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Horizontal Extension: 14.000 mm 2. Pump Capacity: 2x160 lt / min 3. Operating Pressure: 320 bar ( 280 bar for the polyp ) 4. Oil Tank Capacity: 350 lt 5. Electric Motor: 75 kW 6. Turret Revolution : 0-8 rpm Lrjdpfxod R Raks Adweg 7. Operating Weight: 30-35 tons 8. Swivel Angle: 360° 9. Vertical Angle: 76° 10. Polyp (Grab ) Capacity: 450 liter 11. Polyp (Grab ) Rotation Angle: Infinite 12. Polyp (Grab) Teeth Quantity: 5 Stationary, Crawling, Mobile, and Tyre versions of the material handler are available upon request.

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Lredpfexn Svdsx Adweg Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: like new (used), Year of construction: 2023, BRAND NEW MACHINE!!! 0 operating hours!!! 3-axis CNC lathe SMEC SL2000M, made in KOREA, year of manufacture 2023. Control: Siemens 828D - ShopTurn (touch screen). Turning diameter: 360 mm. Turning length: 520 mm. Main spindle: Belt drive technology, max. speed: 6000 rpm, power (max.): 18.5 kW, bar capacity: 52 mm. 3-jaw chuck, Samchully MH-206 V1. 24-position turret, BMT55. Tool drive: 5000 rpm. Accessories: chip conveyor, coolant tank with pump, documentation. Ledpfx Aoyahwpodwsrg

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller GE FANUC 21i-TB Swing dia 533 mm Turning dia 340 mm Turning lenght 355 mm X travel 209 mm Z travel 355 mm Spindle hole D50,8 mm Spindle speed 5000 rpm Chuck size max. D200 mm Lrodpfx Asvw Uqaodwsg Turret 12-fold Rapid speed 30 m/min Spindle power 11 kW Spindle face A2-6 Tool holder type VDI30 C axis 0,001 degree (programmable) Dimensions LxWxH = 2300 x 1700 x 1700 mm Weight ca 3000 kg Features, accessories - Hydraulic chuck - Short barfeeder EMT Super 80 - Manual Guide in FANUC Software - Drive tool turret and C axis - Tailstock - Part catcher - Manuals Very good condition. The lathe works accurately and run quitely. Ready to buy immediately.

Condition: excellent (used), Year of construction: 2012, CNC lathe 2 axes DMC Korea DL22 Fanuc OiTD with Manual Guide and USB port year of manufacture 2012 8-inch chuck Spindle bore 65mm Lsdexyaulspfx Adwsrg Turning length 400mm 12-position tool turret Tailstock Coolant tank with pump

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . Lodpjx Rkvqefx Adwerg This CNC made in Japan and definitely needs a permit of MATI

Condition: good (used), Foliant Mercury 760 NG Laminating Machine The most equipped laminating machine in Foliant’s offer. Fully automatic machine, ideal for digital printing houses. Very good condition, ready to work. Year of production 2019. Description: – feeding from a high stack, head on a servo motor (elevator) – automatic separator – pneumatic roller pressure – sheet straightening module – built-in Becker compressor – jogger on sheet collection – gilding module, rewinder Feeding system: servo motor head Max sheet size: 76×110 cm Min sheet size: 25×32 cm Max. capacity 1300 sheets B1 / h Max lamination speed: 20 m / min Temperature: 80 – 140°C Lrjdjx Tvlcepfx Adwsg Heating time 8 min Installed power: 6000 W -Power supply 380V Weight 810 kg

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min Lrodpfxsq H Tr Te Adwog TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; PCMCIA SERIAL PORT ; USB PORT

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. X/Z travel 195mm/560mm. Fitted with 215mm diameter. Lrjdovfm H Ajpfx Adwjg 3 jaw-powered chuck 12-station turret. Tailstock. Tool setter. Part catcher.

Condition: used, Year of construction: 2017, Doosan Puma GT3100LM Year of manufacture: 2017 Control: Fanuc 0i-TF Turning diameter: [mm] 376 Turning length [mm] 1245 Main spindle: Belt-driven spindle Max. spindle speed 2800 rpm Max. power 22 kW Max. torque 1124 Nm Bar capacity 102 mm 3-jaw chuck, Schunk ROTA THW plus 315-104 12-position turret BMT65 turret head Lsdpfx Asxggktodwjrg Travel in X/Z axes 260/1350 mm

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Lodpfx Aoycpw Aodworg Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.