Used Universal Washer for sale (4,944)

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 380/70 -Elbe .: 0.107.110.0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Dimensions: Ø 75 x 380 mm Ndjdpfxsx Ngf Eo Aanjf -Weight: 3.2 kg

Condition: used, Universal tool milling machine Brand: OPTIMUM Model: MT 100 Year of manufacture: 2018 – workshop tested Machine no.: J33021808035 Geometric acceptance with test report Accessories: - 3-axis digital display DPA 2000 - Vertical milling head SK 40 with drawbar thread M 16 - Fixed table 1,120 x 260 mm (T-slot: 14 mm) - Machine lamp - Coolant system Nodpew Rlvqsfx Aanjdf - Manual central lubrication - Operating manual Used as seen, without warranty The machine technically corresponds to the state of the art at the time of manufacture.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 330-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices. Ndedpfsx Nparjx Aanef

Condition: used, Year of construction: 1990, Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels. Additional title: Keg spraying and keg brushing Max. capacity: 300 Kegs/h Capacity keg filling plant: 110 Kegs/h Voltage: 220/380 V Frequency: 50 Hz Length: ca. 2200 mm Ndsdpfexwy H Aox Aanjf Width: ca. 1500 mm Formats: 30-litre and 50-litre kegs, EU format, with PU jacket Features: Spray jets, high-pressure pump, brush station, label discharge

Condition: good (used), Year of construction: 1996, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, rotational speed (max.): 18,000 rpm, overall weight: 4,000 kg, For sale is a 5-axis machining center of the DMU brand and type 50 5 Njdpery Tn Esfx Aanodf The machine comes from a vocational school, is in good condition and very well maintained Please note in particular that the spindle has only 2,000 hours, 18,000 rpm and the IKZ system Technical data Year of construction: 1996 Operating hours: 35,000 h Spindle replacement: 33,000 h Spindle hours: 2,000 h Spindle holder: SK 40 Control: Heidenhain Mill Pluss Max. speed: 18,000 rpm Working range x/y/z: 500/380/380 mm Rotary table: 500*380 mm Installation dimensions L/W/H: approx. 4,000/5,200/2,400 mm Weight: approx. 4,000 kg On request, for an extra charge, can be delivered throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2011, Control Unit Brand SIEMENS Ndedpfjx D Hbgsx Aanef Model 810 D General Data Measurements width 2815 mm Measurements depth 4325 mm Measurements height 2450 mm Machine weight 4010 kg Main Drive Number of axis 5 Movement X-Axis Movement 500 mm Y-Axis Movement 450 mm Z-Axis Movement 400 mm Table Outer length 630 mm Outer width 500 mm Table load 200 kg Additional Equipment No. of Tools: 16 This 5-axis DMG DECKEL MAHO DMU 50 eco was manufactured in 2011, offering advanced CNC milling capabilities. Ideal for complex geometries and precision parts, this machine represents a significant asset for enhancing production efficiency. Contact us for more information. Application Types Milling

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 480/70 -Elbe .: 0.107. see photo -Flange Ø 75 mm Nedpfx Aajx Nf Ufjnjdf -Bolt circle: Ø 62 x 6 mm -Dimensions: Ø 75 x 480 mm -Weight: 3.4 kg

Condition: used, Year of construction: 2002, Technical Data: Travel X-axis: 1250 mm Travel Y-axis (cross): 880 mm Travel Z-axis (vertical): 800 mm Njdex Iry Sepfx Aansdf Tool holder: SK50 Drive power: 44 kW Tool magazine: 60 stations NC rotary table, table size: 1250 x 1000 mm Max. rotation speed of table: 8.1 rpm Universal milling head: B-axis Spindle speed range: up to 10,000 rpm Control unit: iTNC 530 Total connected load: 81 kVA Max. tool diameter for 30/60 tool stations: 100 / 110 mm Max. tool length from spindle nose: without tool breakage monitoring: 450 mm with tool breakage monitoring: 390 mm Features: - Heidenhain iTNC 530 control - 5-axis - 60 tool stations - NC rotary table - Coolant system

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h Ndjdpfx Asx Nn Sasanof * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: used, Year of construction: 1997, operating hours: 10,227 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, table width: 540 mm, table length: 1,000 mm, overall weight: 4,500 kg, spindle speed (max.): 12,000 rpm, For sale is a machining centre from Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. Particularly noteworthy are the low program run hours. Technical data: Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control ON: 8,283 h Machine ON: 31,148 h Program run: 10,227 h Njdsw I R I Hspfx Aansdf Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Max. table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed speed: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 positions Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe at additional cost, upon request. All prices are subject to VAT. Inspection possible by appointment. Contact us — our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 3450 kg Control Unit Brand Schüco Ndjdpsx D H Tpsfx Aanjf Main Drive Spindle speed range up to 18000 rpm Number of axis 4 Movement X-Axis Movement 7530 mm Y-Axis Movement 1180 mm Z-Axis Movement 660 mm Additional Equipment Number of clamps: 8 This 4-axis SCHÜCO PBX AL-7200 was manufactured in 2008. It features a large X-axis travel of 7,530 mm, a Z-axis of 660 mm, and a maximum spindle speed of 18,000 rpm. The machine includes an 8-position tool magazine and is capable of machining from three sides, suitable for both aluminium and steel profiles. It comes with a SCHÜCO CNC control system and weighs approximately 3450 kg. Contact us for more information about this machine. Application Types Milling

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/35 -Elbe item no.: 0.107. 100,0001 Ndsdpfx Aajx Nf Tnsnsf -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available - Price: per piece -Dimensions: Ø 75 x 360 mm -Weight: 2.8 kg/pc.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min Ndodpjx Nn Riofx Aansf feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: good (used), For sale is a CNC milling machine DMG DMU 50 V with Heidenhain 426/430 control, 5 axes. The item is in good condition. Technical specifications: Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 400 mm Table: NC rotary/swivel table Rotary/swivel axes: B-axis approx. -10° / +95° C-axis (rotation): 360° Max. workpiece weight: approx. 200 kg Table surface: Ø 500 x 380 mm Main spindle: SK 40 (ISO 40) Max. spindle speed: approx. 10,000 rpm Max. tool length: approx. 280 mm Max. tool weight: approx. 6 kg Transport dimensions: 2.45 x 1.76 x 2.38 m Machine weight: approx. 3,500 kg Total power requirement: approx. 17 kW Ndsdpfx Aajxvzy Uonef Transport and loading can be arranged Europe-wide for an additional charge, if required. Prices exclude VAT. Inspection possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE & SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For more information or contact options, please visit our website.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 15,652 h, General Data Machine weight 6500 kg Control Unit Brand HEIDENHAIN Model ITNC 530 Main Drive Number of axis 5 Ndedpfex Ixiasx Aansf Spindle Speed 18000 RPM Tool taper SK 40 Movement X-Axis Movement 500 mm Z-Axis Movement 380 mm Y-Axis Movement 480 mm This 5-axis DMG DMU 50 eVo was manufactured in 2004. It features X, Y, and Z axis travel of 500/420/380 mm, rapid traverse of 50 m/min, and a spindle speed up to 18,000 rpm. Equipped with a SK40 tool holder, 32-position tool magazine, and internal coolant supply at 40 bar. Consider the opportunity to buy this DMG DMU 50 eVo universal machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 320/35 -Elbe item no.: 0.107. 100,0001 -Flange Ø 75 mm -Bolt circle: Ø 62 x 6 mm -Number: 6x cardan shafts available -Price: per piece -Dimensions: Ø 75 x 330 mm Njdpfsx Nf R Tsx Aanjdf -Weight: 2.7 kg/pc.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW Nodpfjx Nm Ruox Aansdf weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), For sale are various Deckel FP3 milling machines, which are all in good condition. The special feature of this machine is the clamped table, which would be swiveling, rotating or even movable. A purchase of the machine with a "normal" milling table is also possible. The machine has been cleaned and tested by us. If desired, safety devices can also be mounted for an additional charge. L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital display: 3 - axes - digital display travels: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Ndsdoiz T Exjpfx Aanof Drive power: approx. 3.8 kW Tool clamping: manual feeds & rapid traverses: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid feeds: approx. 1.5 m/min Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Year of construction: 2020, condition: good (used), Cardan shaft, universal joint, universal joint with flange, drive shaft, cardan joint -Manufacturer: Elbe, Cardan shafts with universal joint -Type: Length S/X 350/40 Ndodpfx Ajx Nf I Esanef -Elbe .: 9.990.000.0354 -Flange Ø 90 mm -Bolt circle: Ø 75 x 8 mm -Quantity: 10x cardan shafts available -Price: per piece -Dimensions: Ø 90 x 400 mm -Weight: 5.1 kg/pc.

Condition: like new (used), Year of construction: 2009, operating hours: 625 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, total height: 2,100 mm, total length: 2,000 mm, total width: 1,700 mm, overall weight: 1,600 kg, For sale: 3+2 axis machining center by DMG, model DMU 35 M Ndodpjx Aiiqefx Aanef This machine comes from an educational institute and was primarily used for training in control operation and setup. Note the exceptionally low spindle hours. Technical specifications: Year of manufacture: 2009 Spindle hours: 625 Machine no.: 18065358844 X-axis travel: 350 mm Y-axis travel: 240 mm Z-axis travel: 340 mm Feed rate: Infinitely variable up to 5,000 mm/min Rapid traverse: 5 m/min Servomotors for X, Y & Z axes Clamping area: Ø 400 x 280 mm Rotary range: 360° (mechanical) Table clamping: +105 / -150 (mechanical) Max. table load: 100 kg Tool changer: Manual change Tool holder: SK 40 Tool clamping: pneumatic/mechanical Footprint: 3,800 x 3,600 x 2,100 mm Transport dimensions: approx. 2,000 x 1,700 x 2,100 mm Weight: 1,600 kg Transport and loading can be organized Europe-wide upon request and at an additional charge. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery buying/selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, For sale: 3-axis CNC milling machine, Mikron VCE 600 Pro The machine is in excellent condition and ready for immediate use. Technical data: Ndsdpfexnprvjx Aanef Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Included in the offer: Chip conveyor, interior extraction, through-spindle coolant system, handwheel control, coolant gun, 3D probe, Renishaw tool measurement system Not included: Clamping devices, tool holders Transport and loading can be organised across Europe at additional cost upon request. Prices are quoted net plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Ndjdpfxsihf Ets Aanjf Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: good (used), Year of construction: 2000, operating hours: 53,776 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, rotary table diameter: 500 mm, rotational speed (max.): 18,000 rpm, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 2000 Control: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping surface: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 slots Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be arranged Europe-wide at an additional cost upon request. Prices are subject to VAT. Viewing possible by appointment. Please contact us—our team is happy to assist you. Ndjdpfxowxd Agj Aansf Trade-in or exchange possible! Machinery Purchase / Sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell your equipment? For further information or contact options, please visit our website.

Year of construction: 1988, condition: good (used), For sale is a milling machine of the company Maho and the type 500 W The machine is in good condition and fully functional Year of manufacture: 1988 Heidenhain TNC 232 travels X- 500 mm, Y- 380 mm, Z-350 mm spindle mounting ISO 40 quill stroke vertical 50 mm spindle speed 20-4000 rpm, infinitely variable feed range 1-3000 mm/min rapid traverse 5 m/min table load 250 kg total power requirement 11,3 kW Machine weight approx. 2 t All prices plus VAT Ndsdpfx Aaeittrlensf machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Ndedpfx Aowtft Noanjf Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.