Used Veneer Patcher for sale (571)

Condition: ready for operation (used), Year of construction: 2025, Main Drive Stroke 400 mm This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Application Types Bledpfx Aewzn Edebzsp Pressing / Laminating

Condition: used, Year of construction: 2002, machine/vehicle number: 4209/0408, Kuper FLI Veneer Splicer Basic parameters: -Min veneer length 500 mm -Min veneer width 45 mm -Veneer thickness 0.3-2.5 mm -Feed 20-50 m/min -Heating zone length 120 mm heating rail 0.46 KW Bedpfxowi R Rlj Abzslp Working height 930 mm Weight 2050 kg

Condition: used, No. 04473 Bedew A Actspfx Abzelp Veneer saw Scheer FM 8 - 3100 Used Jointing and fine-cutting machine for joint-tight and splinter-free sawing of veneer, chipboard, blockboard or solid wood Strip cuts are very easy to make Rear table is approx. 470 mm wide The clamping beam is operated pneumatically The saw unit is guided by hand Cutting length 3100 mm Cutting height max. 45 mm Motor 1.8 kW Transport dimensions approx. 3800 x 1100 x 1400 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Bedpfx Aoumrgajbzolp Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: excellent (used), Veneer gluing machine Working width 780 mm With paper and glue thread Blsdju R I Ezopfx Abzop

Condition: ready for operation (used), Year of construction: 1998, Crossfeed Veneer Splicing Machine / Veneer Composer in Crossfeed Operation Manufacturer: Fisher Rückle Model: Delta FZX 28 Delta + RVP / BS Bedpfx Asw Tlktebzelp completely equipped with: - Intermediate conveyor - Edge reinforcement and trimming unit - Stacking device with lifting table Maximum veneer strip length: 2800 mm Veneer strip thickness: approx. 0.4 – 1.5 mm (depending on veneer type) Veneer strip width: approx. 70 – 600 mm (crosswise to the grain direction) Adhesive types: urea-based or PVAC-based This machine enables you to join veneer sheets crosswise using glue (PVAC or urea). It is necessary that the veneer sheets are pre-glued. The machine guarantees excellent joints of any type of veneer. Gluing is performed by a system of hydraulic cylinders applying horizontal pressure, which ensures tight, gap-free joins along the entire length. The machine’s heavy-duty, robust design guarantees longevity and reliable operation. Operation is simple and intuitive thanks to a clearly laid out control panel. Separate manometers provide the operator with direct access to the pressures for the heating plates, the horizontal pressing system, etc., allowing for quick changeover times. The machine’s upper traverse can be raised to allow easy and rapid access to the heating plates for cleaning and maintenance.

Condition: good (used), Year of construction: 1979, Veneer saw w. planing unit cutting length 3100 mm Bsdpfxsp T T Uke Abzjlp with beautiful rear fence

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Minimum thickness: 4.0 mm Maximum width: 1300 mm Maximum length: 3000 mm Hydraulic pressing on thickness and width. Pneumatic pressing on length. Mechanically driven feeding table, gravity roller discharge. Both plates have been reconditioned, both the suffusion plate and the copper coating have been changed. 30kW high frequency generator Bsdpfjw A Nh Aex Abzelp

Condition: excellent (used), Independent Machine, Top machine Max working width mm 1350 Working height (thickness) mm 3 - 130 Built-in electric and command panel Electronic Programmer PCM (software Costa Sanding Manager) Feeding speed (adjustable) 4 - 24 m/min No. 1 Vacuum unit (power Kw 11) Pressure "shoes" to allow the process of short workpieces Air blowers on the abrasive papers Total power installed KW 69 No. 7 Working groups: 1°) Cross belt TR7, pad with No. 84 sectors (TPR16) (Kw 15, with inverter) 3-16 m/sec 2°) Cross unit XLS (for trimming), with N° 122 abrasive elements (Kw 1,5, with inverter) 3°) Longitudinal unit FTR-3, roller (diam. mm 330) Kw 2,2 with inverter, 40 Sh (3-20 m/sec) 4°) Longitudinal belt TP16, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec Bjdpfx Absgx Hnhozjlp 5°) Longitudinal belt TP16 Super-finisher SF/3250, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 6°) Scotch-Brite SB180 (Kw 1,5) diam. mm 180 7°) Rotary air-jet blowers for the panels cleaning SR

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg Stacking device DA-2200 Veneer format length (longitudinal to the fibre) 600 * - 1500 mm Veneer format width (transverse to the fibre) 500 * - 2200 mm Maximum stacking width for output on the - right-hand side 2200 mm - left-hand side 2200 mm Bljdjt Akcfepfx Abzop - back 1500 mm Stacking height max. 500 mm Power consumption from FZR-15 Weight 1200 kg Lifting table 2500 mm L x 1200 mm W. 1000 kg

Condition: excellent (used), Veneer press JU 60 2200 x 1200 mm heating plate damaged (see pictures), heating plate works Blodpemhguaofx Abzop year of construction 1965, heating 12 kw Loading costs (forklift rental approx. 500 €)

Condition: new, Year of construction: 2024, FULL AUTOMATIC HORIZONTAL BAND SAW WRC1050 FOR CUTTING VENEER - SERVO – PERFORMANCE, DOUBLE CUT EFFICENT FAST CUTTING WITH HIGH CUT PRECISION with FAST CENTRATION and FAST TURNING system Bedpfx Ajghrnbjbzjlp

Condition: as good as new (ex-display), Year of construction: 2021, total width: 1,618 mm, total length: 1,830 mm, total height: 2,400 mm, overall weight: 5,000 kg, type of input current: three-phase, input current: 81 A, input frequency: 60 Hz, opening width: 100 mm, operating temperature: 140 °C, cylinder diameter: 65 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Blodpfst Eq E Sjx Abzjp Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. Blodpfxog Nn E Ns Abzjp • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 241 143, cutting length (max.): 3,600 mm, Veneer shears with one blade; length: 3.60 m Blsdpfowql N Ssx Abzjp

Condition: used, functionality: fully functional, Machines connected in one line (all four machines are only sold together): Blodot A Nr Sopfx Abzep 1. Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 2. Glue application machine GLUEMASTER, year 2006 3. Roller conveyor MONGUZZI R2500, year 2009 4. Veneer fanning machine Fisher+Rueckle FANNINGMASTER AP515, year 2009 Tech. data Veneer 2-knife cutting guillotine CUTMASTER Monguzzi 2600 Cutting length 2.600 mm Length of cross-cut 1.477 mm Cutting height 100 mm Strip width min 20 mm Rip fence Yes Pressure beam pneumatic Blade drive pneumatic Weight 3.800 kg CE marking Total connection 10 kW

Condition: excellent (used), Year of construction: 1962, Veneer press Year of construction 1962 60 tons pressure Bedpfx Aetyk Hysbzjlp 15 kw heating, 380 Volt 2500 x 1200 mm Heating plates are ok.

Condition: ready for operation (used), Complete Veneer production line. Capacity produced veneer: 8 to 10 m3 per hour Dimension veneer sheets: Length 2.62 m, Minimum width 0.5 meter Max diameter: 62 cm Max log length: 6 meter ( Longer logs if re-building the log intake ) Main parts: - Logintake with debarker and butt-end reducer - Veneer peeling system Bsdpfxjtryf Ij Abzelp - Dryer for veneer - Conveyor system for quality sorting with stacking units - Chippers for chipping off-cuts

Condition: used, The Kuper FW/Mini veneer splicing machine is designed for precise gluing and splicing of veneer sheets using glue threads. It's ideal for smaller businesses or flexible applications in the production of high-quality veneer surfaces. Stand throat: 420 mm Blodpjwwkh Hsfx Abzep feed: approx. 6 m/min

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Bsdpswd N Rmefx Abzjlp Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: used, Year of construction: 1969, Veneer press U250/130 Bedpfx Abowx Ndcozolp Year of manufacture 1969 - 16.7 kW - Heating plates are in good condition - 2500 x 1300 mm - Overall dimensions: 3100 x 1450 cm - 80 t, 2.5–3.5 kg/cm²

Condition: excellent (used), Pressing area 2500 x 1250 mm Number of press cylinders # 4 Total pressing force 70 t Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 20.3 kW Space requirement (L x W x H) approx.: 2900 x 1350 x 1900 mm Weight: approx. 3600 kg Hydraulic hot plate press Lower piston design Electric heating plates gold anodized version Bljdpfxerivrwo Abzep Press pressure infinitely variable by means of pressure switch unit Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel with all operating and control functions Analog temperature display for both heating plates Safety rip cord Rack compensation Main switch CE LOWER ELECTRIC HEATING PLATE NEW UPPER ELECTRIC HEATING PLATE NEW approx. 4 years ago

Condition: excellent (used), Hot Platen Press with Medium Heating Platens Pressing area 2750 x 1300 mm Number of press cylinders #6 Total pressing force 100 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load approx. 3.0 kW Space requirement (L x W x H) approx.: 3300 x 1450 x 1950 mm Weight: approx. 3700 kg Bsdpjvzq Rkjfx Abzjlp Hydraulic Hot Platen Press Down-piston design Medium heating plates - for connection to the central hot water supply Pressure continuously adjustable via pressure switch Central control panel Analog temperature display for heating plates Safety ripcord Rack compensation Main switch Automatic opening Stroke limiter CE NEW AL cover plates

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. Blodpev D I Uxsfx Abzsp (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Veneer saw Front support table Pneumatic pressure beam control Rear table consoles with angle stop Suction channel Cutting length 4200 mm Cutting height approx. 50 mm Motor power 3.0 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 5800 x 1350 x 1200 mm Advise used machines: Bjdpevbzpksfx Abzjlp - Technical data without obligation, mistake and intermediate sale reserve. - Price is considered ex-location price - All articles or machines are bought as seen without any entitlement on warranty. - It is left to the choice of the buyer to view the machines before at its location. - Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!) Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).