Used Veneer Patcher for sale (519)

Condition: like new (used), - Shelf length: 3000mm - Shelf width: 1300mm - Clearance: 340mm - Number of pistons: 6 - Piston diameter: 80mm - Oil heating Cpsdpfx Aovwi Rbefpsu - Hydraulic side pressure - Emergency stop – pull cord

Condition: good (used), Cutting length 3050 Handwheel tension Chain feed Cpjdpfx Aswkfqpsfpou Space required approx. L x W x H approx. 4200 x 800 x 1400 mm All information is subject to change without notice.

Condition: used, No. 04485 Veneer press Ott JU 2513 Used Electrically heated heating plates Hydraulic pressing pressure Aluminum heating plates Plate dimensions 2550 x 1350 mm LW Cpjdpsw Npbzjfx Afpou BUSSE heating plates renewed in 2019 and covered with Mylar film 4 hydraulic cylinders each 90 mm diameter Total pressing pressure 90 tons Specific pressing pressure 2.8 - 4.0 kg/cm2 Button control for closing / opening / stop Emergency stop rip cord Opening width 400 mm Total power 19 kW Stable construction with 3 longitudinal beams in the upper part of the press and 2 longitudinal beams in the press table Transport dimensions approx. 2900 x 1500 x 2000 mm LWH Weight approx. 4200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04473 Cedjw A Actjpfx Afpepu Veneer saw Scheer FM 8 - 3100 Used Jointing and fine-cutting machine for joint-tight and splinter-free sawing of veneer, chipboard, blockboard or solid wood Strip cuts are very easy to make Rear table is approx. 470 mm wide The clamping beam is operated pneumatically The saw unit is guided by hand Cutting length 3100 mm Cutting height max. 45 mm Motor 1.8 kW Transport dimensions approx. 3800 x 1100 x 1400 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Used machineCutting length 3000 mmwith handwheel clampingAvailability: short termStorage location: Solingen Cedpfx Aew I Uhdofpopu

Condition: used, No. 04482 Veneer splicing machine Haug FZZ 95 Used For joint-tight splicing of veneer from approx. 150 mm length, 35 mm width and 0.3 - 3 mm thickness The glue line comes from below Automatic thickness and tolerance compensation Infinitely variable throughput speed of 10 - 45 m/min Zig-zag or serpentine line of the glue line Electrical connection 0.8 kW, 240 V Stand projection 950 mm Infinitely variable material feed 5 - 15 m/min Transport dimensions approx. 1550 x 750 x 1340 mm LWH Weight approx. 265 kg Sale on behalf of the customer, ex location near 69124 Heidelberg, without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Cjdpfxow Id S Ss Afpjpu For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Cutting and milling length 3550 mm Cutting height 45 mm Saw motor power 2.2 kW Milling motor power 1.1 kW Extraction channel Workpiece clamping by handwheel Year of manufacture 1978 Codpewq D Tpofx Afpopu Price 2800.-

Condition: ready for operation (used), Steinemann Veneer Press Press size 2750 x 1350 mm Opening width 600 mm. Please note: The press must be recessed 200 mm into the floor or placed on 200 mm feet. Electric heating plates 16.8 kW Press force 90 tons Specific pressure 3 kg/cm² Cpedsv Uqrbjpfx Afpju Cylinders 6 x 80 mm Weight approx. 4800 kg Space required 3700 x 1400 x 2100 plus 200 mm at the bottom Price 6000.- Condition: Ready for use

Condition: excellent (used), Veneer press JU 60 2200 x 1200 mm heating plate damaged (see pictures), heating plate works Cpedpemhguajfx Afpeu year of construction 1965, heating 12 kw Loading costs (forklift rental approx. 500 €)

Condition: excellent (used), Fully functional veneer press from Steinemann model Triumph-60 Plates: 225x125 cm The plates are NEW 4.5 kW water-heated (integrated) Codsw D Rt Ajpfx Afpepu 3200 kg

Condition: used, Kuper FW 630 Mini The ideal machine for small veneer quantities with the technical advantages of all KUPER zig-zag gluing machines: Discus disks with tolerance compensation mechanism. The gluing medium is a KUPER special glue thread. The glue thread is automatically applied in a zig-zag line and guarantees tight and firm joint connection. The glue line is applied during pressing inwards during pressing, which means that the adhesive does not need to be sanded off. is no longer necessary. Technical data: Cpsdpsbi I Apsfx Afpsu Stand design 630 mm Veneer thickness approx. 0.4 - 2.0 mm Feed rate approx. 7 m/min Operating voltage 230 V, 50 Hz/60 Hz Total connected load 110 VA Space requirement 1050×905 mm = 0.95 m² Total height 475 mm Net weight 95 kg Gross weight 110 kg always 10 pieces in stock FW 420 FW 630 FW 920

Condition: good (used), Year of construction: 1981, functionality: fully functional, JOSTING EFS 2600 Veneer Shear Year of manufacture: 1981 S/N 9443 Manufacturer: JOSTING Maschinenfabrik GmbH & Co. KG Model: EFS 2600 Good condition Purpose: Precise cutting and trimming of veneer sheets and veneer bundles Technical specifications: Cutting length: 2,600 mm (effective cutting width) Material thickness: up to approx. 3 mm (depending on veneer type and condition) Drive: Electric motor drive via belt and eccentric shaft Cutting principle: Upper blade moves vertically against a fixed lower blade (guillotine cut) Blades: High-quality high-speed steel (HSS), ground and replaceable Feed mechanism: Manual or optionally pneumatic/hydraulic, depending on the model Table height: approx. 850 mm (ergonomic for Operator) Backgauge: Manually adjustable with scale; Optionally available with digital display or motorized adjustment Cpjdpfjwmxmvox Afpou Operation: Two-hand safety control with emergency stop button Foot pedal for the clamp on certain models Clamp: Mechanical or pneumatic, ensures precise fixation of the veneer stack Safety features: Two-hand operation Emergency stop Protective covers Electrical connection: 400 V / 3 Ph / 50 Hz Power rating: approx. 4–5 kW Weight: approx. 1,800–2,000 kg Dimensions (L x W x H): approx. 3,400 x 1,300 x 1,700 mm Special features: Solid, torsion-resistant welded construction High repeatability for serial cuts Suitable for all common veneer types (beech, oak, maple, exotic woods, etc.) Areas of application: Veneer processing in joineries and Furniture factories Veneer production and sorting Interior and vehicle fittings (e.g., for yachts)

Year of construction: 1995, condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Cpsdpfehbp Ifex Afpou Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 140611/3, Fisher + Rückle Gluemaster - glue applying machine. Machine is 100% functional. Cpjdpfoum R Agex Afpeu

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 209070, CASATI BIT 900/2000 veneer cross-cutting machine. Fully functional. Cpodpfjuna E Hsx Afpsu

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 00359, cutting length (max.): 2,300 mm, cutting height (max.): 30 mm, Monguzzi 2300 TRC MP - Veneer scissors Cjdpoumvvrsfx Afpjpu Defect - oil i leaking a little from the hydraulics. Fully functional.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 10108, cutting length (max.): 2,900 mm, cutting width (max.): 530 mm, CASATI BIG 2600 - Double knife veneer scissors. Machine is 100% functional. Codoum Rpgepfx Afpjpu

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 181206, cutting length (max.): 3,100 mm, cutting width (max.): 520 mm, MONGUZZI AFD S35/3000 Cjdsumwb Nepfx Afpjpu

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 203841024, pressing force: 120 t, installation height: 400 mm, working width: 3,500 mm, empty load weight: 5,150 kg, number of cylinders: 8, TECHNICAL DETAILS Press size: 3.5 x 1.3 m Panel size: 3.5 x 1.3 m Opening stroke: 400 mm Max. pressing pressure: 120 tons Number of cylinders: 8 Oil boiler temperature: Max. 120 °C Heating power: 18 kW MACHINE DETAILS Dimensions: 4.5 x 2.1 x 2.2 m Weight: 5,150 kg Operating voltage: 400 V / 50 Hz EQUIPMENT - Touch screen with computerized interface TS/400 Csdpov Ak Tuofx Afpopu - Mylar cover for upper and lower platen - Electronic flatness control EFC - Exclusion of the leftmost row of cylinders - CE safety standards

Year of construction: 1980, condition: used, saw cutter for veneer CUTTING TOOLS Cpedpjdnprdefx Afpou ADVANTAGES - German production - almost - very good condition - guillotine used - high quality, low price cutting length 3100mm pneumatic clamp + cutting height 50mm up / down saw adjustment with cutter + manual travel of the aggregate + Equipped with a back panel + dimensions of the worktop 2450x800mm engine power about 2kW Dimensions Length / Width / Height 4670/900 / 1300mm weight 650kg

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total width: 3,090 mm, total length: 2,000 mm, total height: 3,600 mm, overall weight: 3,800 kg, type of input current: three-phase, workpiece height (max.): 60 mm, table width: 1,000 mm, table length: 2,600 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Cpsdpfetx T Tyjx Afpou

Condition: ready for operation (used), Dryer for veneer with 4 levels. In-feed and out-feed system with quality sorting and sorting pockets. Cedjw Ib A Uspfx Afpjpu

Condition: used, Year of construction: 2002, Used ORMAMACCHINE hot press model NPC/R 6/120 working dimensions: 3500 x 1300 mm solid platens in perforated steel Cpedpoxn Nnwofx Afpeu fixed lower platen; movable upper platen platen thickness: 80 mm number of cylinders: 6 total pressing force: 120 ton pistons diameter: 85 mm installed power: 8 kW year of manufacture: 2002 CE marked

Condition: ready for operation (used), Year of construction: 1963, Brand: Gustav Josting Model: PFS 2100 Year of manufacture: 1963 Technology data: Cutting length: 2100 mm Extra knife included Cpjdpfx Afomb U A Iopju Transport dimensions: 315x150x160 cm Weight: approx. 2000 kg Stock no: 2001659BXM

Condition: like new (used), Year of construction: 2018, Costa sanding machine suitable for sanding veneer, 650 mm working width, with 5 rollers Cpjdpfx Afexbh Agjpeu