Used Water Slot Milling for sale (18,654)

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device Nwedpfx Aezzw Nieb Ujl * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: good (used), Two-speed motor Spindle shank diameter: Ø30 mm Vertical spindle travel: 150 mm Nwedpfxsz Aflhe Ab Uel Maximum milling cutter diameter: Ø250 mm Spindle speeds: 3000 / 4000 / 6000 / 7800 rpm Motor power: 3.1 / 2.4 kW Table dimensions: 670 x 940 mm

Year of construction: 2000, condition: repair required (used), functionality: not functional, Spare parts, service, and repairs for tool milling machines from the production of TOS, later INTOS Zebrak of the series FN 20/32/40, FNGJ 20/30/32/40/50, FNGP 40/50 Nwjdoxg H Hhspfx Ab Uol

Condition: new, Year of construction: 1990, functionality: fully functional, Clamping ring for vertical quill TOS/INTOS FNG, FNGJ, FNGP tool milling machines. Machining must be carried out to suit the specific machine. We are happy to take care of this for you, as well as any repairs of milling heads for machines from the TOS/INTOS Zebrak production. Nwedpfx Abeyghywj Uel

Condition: ready for operation (used), Type RU 991 Longitudinal stroke 4500 mm Nwjdevn Tc Ajpfx Ab Uol Transverse stroke 1000 mm Vertical stroke 1000 mm Table dimension 6155x1000 mm Spindle speed 15 - 1500 rpm (RPM) Dimensions 6400 x 2400 x 2600 Weight 18T

Condition: used, Floor plate area: 4000 x 4000 mm Nwedpfx Abez Ahaue Uol E20 table: 2000 x 2000 mm Load capacity: 20 tons Travel: X=4000, Z=2500, Y=1600 mm Weight: 75 tons

Year of construction: 2007, condition: used, Colour: White Empty weight: 2.500 kg Dimensions (LxBxH): 170 x 210 x 230 cm - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 750283 - Drive system: CNC - Control system brand: Siemens - Control system type: Sinumerik 802D - Power [kW]: 7.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 450 Nodpfx Ajwnip Reb Uowl - Y-axis travel [mm]: 300 - Z-axis travel [mm]: 400 - Table length [mm]: 920 - Table width [mm]: 280 - Tool holder: ISO40 - Min. spindle speed [rpm]: 100 - Max. spindle speed [rpm]: 8000 - Transport dimensions: 1700mm x 2100mm x 2300mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2026, operating hours: 40 h, functionality: fully functional, pressure: 2,500 bar, year of last overhaul: 2026, We are selling our IBAK MicroGator with a UHP high-pressure water cleaning system for main pipelines DN 200–DN 800. The robot was only used for one project and has not been used since. * Only 4 months old * Used for only 5 working days * No signs of wear – like new * Equipped for Ultra High Pressure (600–2500 bar), compatible with Falch and Hammelmann Nedpsz Aupiofx Ab Uowl * Original price: €66,000 * Our price: €50,000 (negotiable) The robot is currently located in the Czech Republic. However, after prior arrangement, it can also be made available in the Cham area in Bavaria. Filip Khol rohrsanierung1a.de

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, table load: 5,000 kg, spindle diameter: 125 mm, spindle speed (max.): 3,000 rpm, feed length W-axis: 600 mm, spindle mount: MK 0, • Year of manufacture: 2006 • Travel range, X-axis – longitudinal: 3,000 mm • Travel range, Y-axis – vertical: 2,000 mm • Travel range, Z-axis – RAM ram: 1,500 mm • Travel range, W-axis – drilling spindle axial: 600 mm • B-axis – table rotation: 360,000 positions • Maximum table load: 5,000 kg Nodpfx Aoz Aydrob Uewl • Table dimensions: 1,250 × 1,600 – unit not specified • Drilling spindle diameter: 125 mm • Spindle power: 37 kW • Spindle torque: 1,646 Nm • Tool interface: ISO 60 DIN 69871/1-A • Control system: Heidenhain; iTNC 530 mentioned in the data sheet • Screen: 19″ • Feed motors: Siemens • Positioning system: Heidenhain • Electronic handwheel: Heidenhain

Condition: used, Year of construction: 1996, input voltage: 400 V, empty load weight: 220 kg, WELL-MAINTAINED, USED KÖLLE L2 LONG-HOLE DRILLING MACHINE WITH A 1.4 KW MOTOR AVAILABLE FOR SALE! Nwodpfx Asz Dbiceb Uel

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, turning length: 196 mm, turning diameter over cross slide: 130 mm, spindle speed (min.): 6,000 rpm, bar diameter (max.): 36 mm, overall weight: 1,900 kg, Equipment: documentation/manual, Yamazaki Mazak QT-6T CNC Turning Center – Excellent Condition We offer for sale a well-maintained Yamazaki Mazak QT-6T CNC Turning Center, manufactured in Japan and kept in excellent mechanical and operational condition. The machine is currently under power, in production, and available for inspection and testing upon appointment. Machine Information - Manufacturer: Yamazaki Mazak - Model: Quick Turn QT-6T - Year of Manufacture: 1999 - Serial Number: 39178 - Country of Origin: Japan - CNC Control: Mazatrol - Configuration: 2-Axis CNC Turning Center (X / Z) - Machine Weight: Approx. 1,900 kg Main Features - 6" Chuck - Collet Chuck - Complete Set of Collets Included - Bar Capacity up to 36 mm - 8-Station Turret - Tool Eye (Automatic Tool Measurement System) - Automatic Parts Catcher - Coolant System - Fully Operational Included Equipment - Fedek Bar Feeder - Bar Feeder Length: 1.5 m - Pneumatic Bar Pushing System - 6" Chuck - Collet Chuck Nodszal Raepfx Ab Ujwl - Complete Set of Collets - Full Set of Tool Holders - Original Manuals and Documentation - Various Accessories Additional Equipment Included The machine is supplied with the complete set of spindle protection plastic tubes (bar guide tubes), allowing safe operation with bar stock and minimizing vibration, noise, and bar whipping during spindle rotation. This contributes significantly to machining stability, surface finish quality, and spindle protection when running long bars. Technical Specifications - Maximum Turning Diameter: Approx. 130 mm - Maximum Turning Length: Approx. 196 mm - Spindle Bore: Approx. 45 mm - Maximum Spindle Speed: Up to 7,000 rpm - Bar Capacity: 32–36 mm - X-Axis Travel: Approx. 80 mm - Z-Axis Travel: Approx. 200 mm - Rapid Traverse X/Z: Up to 30 m/min Condition ✔ Excellent mechanical condition ✔ Regularly maintained ✔ Machine under power ✔ Ready for immediate production ✔ Inspection and test run possible ✔ All manuals and documentation available Additional Information This machine is offered as a complete production package and is ideal for precision machining of bar stock, small and medium batch production, and high-accuracy turning applications. The machine comes with extensive tooling, collets, holders, automatic tool setting, automatic parts catcher, bar feeder, and spindle guide tube system, allowing immediate integration into production with minimal additional investment. Loading assistance is available. Videos of the machine running can be provided upon request.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Nsdpfx Aez Dgw Sjb Ujwl

Condition: excellent (used), Year of construction: 2019, operating hours: 29,081 h, functionality: fully functional, CNC control HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat screen with softkeys RAM: 4 GB Hard disk: 32 GB, of which at least 21 GB program memory Input resolution / display increment linear axes: up to 0.1 µm Input resolution / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with tilted machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic attachment Enable buttons / dead man's buttons according to CE Travel ranges X-axis / longitudinal axis: 4,000 mm Y-axis / transverse axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / connection / pneumatics Max. feed rate interpolating axes: 40 m/min Installed power: 60 kVA Max. power consumption: 150 A Air requirement pneumatics: 400 Nl/min Working pressure pneumatics: 6 bar Machine table / floor plate Machine table recessed, with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling head / universal milling head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining up to 10° possible Integrated cooling of the torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. speed A/C axes: 30 rpm Working torque A/C axes: 450 Nm Clamping torque axes: 1,400 Nm Positioning accuracy A/C axes: 8 arcsec Positioning repeatability A/C axes: 4 arcsec Main spindle Spindle power S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant power: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool holder: HSK-A63 DIN 69893 Rigid tapping for electric spindle Software / calibration Dynamic RTCP software AUTOCAL software for automatic calibration 3D Form Inspect M&H software Software for measuring 3D shapes, tools, molds and dies Measurement program creation directly via coordinate points / surface points Vibration / collision monitoring Sensor for detecting vibrations Detection of collisions and excessive vibrations on 3 axes Reaction time approx. 1 ms Electronic interface for functional testing Tool changer Tool changer with arm for tool changes Overlapped-wheel design Full enclosure for operator safety Tool positions: 80 Nedpfx Abjyrndms Ujwl Max. tool diameter: 75 mm Max. tool diameter with free adjacent positions: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Condition: good (used), Year of construction: 2005, functionality: fully functional, cooling capacity: 47 kW (63.90 HP), type of input current: three-phase, overall weight: 240 kg, noise level: 34 dB, input frequency: 50 Hz, Equipment: freezer, Ciat Dynaciat LGN 120 CIAT DYNACIAT LGN120 liquid chiller without condenser. manufacturer: CIAT DYNACIAT year of manufacture: 2005 Electronic control cooling capacity: 34/47kw Compressor 1pc - Hermetic SCROLL type SZ125S4CC refrigerant R407C Evaporator - Brazed plate heat exchanger heat exchanger capacity: 4.2 liters Nwedpfx Aovzrxcjb Uol - Plate patterns optimized for high efficiency - 19 mm armaflex thermal insulation connection: 1.5" machine dimensions: height: 121cm full core: 160cm width:79cm length:88cm weight: 190kg - Electronic expansion valves - Service valves on the liquid line ■ Control and safety devices - Water temperature control sensors - Evaporator frost protection sensor - Factory-installed evaporator water flow regulator - 24V control circuit - Connect the Touch microprocessor-controlled electronic control

Condition: excellent (used), Diameter Ø 700 x 25 mm Nwjdpjwz Nbmefx Ab Uol Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2008, control SIEMENS - - - - - - - - - - - - - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Nodpfxjzz S Ito Ab Uewl #Tags: GU600 | GU-600

Condition: used, Year of construction: 2009, control SIEMENS - - - - - - - - - - - - - - - - - - CNC Turning- and Milling Center | INDEX - GU 600 The machine is in a well-maintained condition. Nedpfx Ajzz S Iysb Ujwl Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GU600 | GU-600

Condition: used, Year of construction: 1986, Used Machine Year of manufacture: 1986 Features and technical specifications: - Cuts flush with straight and miter cuts (up to 45°) - For solid strips up to 30 mm - Bevel (0–20°) - Rounds veneer and plastic edges - Workpiece thickness: 5–50 mm - Automatic workpiece clamping - Cutting operation triggered by foot switch - Saw blade diameter: 150 mm - Rounding cutter: 100, radius: 2–3 mm - Saw blade tilt: -20° (bevel) – 45° (miter) Nodpfx Abezyy Aie Ujwl - Working height: 720 mm - Movable workpiece support: 820 mm - Motor power: 0.55 kW - Pneumatic connection: 5 bar

Condition: used, Year of construction: 2013, operating hours: 13,672 h, total height: 2,450 mm, total length: 5,000 mm, total width: 2,200 mm, Empty weight: 9.000 kg Price: On request - Year: 2013 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 1237361A51A Nwjdpfxeyzzrks Ab Uol - Operating hours: 13672 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 0-MD - Power [kW]: 11.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 610 - Y-axis travel [mm]: 430 - Z-axis travel [mm]: 570 - Table length [mm]: 650 - Table width [mm]: 450 - Tool holder: BT40 - Main spindle power [kW]: 15 - Max. spindle speed [rpm]: 10000 - Options: Tool magazine, Chip conveyor, Spindle cooling, Pallet milling machine, Exchange table, External cooling - └ Tool magazine [pcs.]: 24 - Transport dimensions: 5000mm x 2200mm x 2450mm (l x w x h) - Transport weight [kg]: 9000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2012, functionality: fully functional, DOOSAN PUMA 2600S – CNC turning center with subspindle, FANUC, year 2012 We offer for sale a DOOSAN PUMA 2600S CNC turning center with subspindle, equipped with a reliable DOOSAN-FANUC i Series control system. The machine is in operation and can be demonstrated and tested upon request. Technical specifications: Manufacturer: Doosan Infracore Model: PUMA 2600S Year of manufacture: 09/2012 Serial number: ML0218-000034 CNC control: DOOSAN-FANUC i Series Configuration: main spindle + subspindle Max. turning diameter: approx. 376 mm Max. turning length: approx. 760 mm Main spindle chuck: approx. 10" Bar capacity through main spindle: approx. 76 mm Max. main spindle speed: approx. 3,500 rpm Nwodpsz Dq Inofx Ab Uel Main spindle power: approx. 18.5 / 22 kW X-axis travel: approx. 260 mm Z-axis travel: approx. 830 mm Turret: 12 positions Automatic subspindle for complete part machining Chip conveyor Rated machine power: 40.7 kVA Power supply: 200/220 V, 3 phases, 50/60 Hz Machine weight: 5,400 kg Robust CNC turning center suitable for both series and single-piece production. Thanks to the subspindle, it enables machining of the part from both sides without the need for manual switching between individual operations. The machine is currently powered on and can be demonstrated in operation.

Condition: new, We offer you high-quality roll-off containers as water tanks/water reservoirs, manufactured to your specifications using a self-supporting design. Available to order! Europe-wide delivery! ---FINANCING---LEASE PURCHASE---LEASING--- -possible, please contact us!- Possible dimensions: 4 - 7.0m x 2.30 x 1.0m Possible internal heights: H = 800 mm H = 1000 mm H = 1100 mm H = 1300 mm H = 1500 mm Optional: Rear platform for mounting a water pump Other dimensions available on request!!! We will gladly design according to your specifications. Suitable for systems according to DIN 30722-1 / 2 Tested and approved according to DGUV Rule 214-017 Material thicknesses: Base: 5 mm Walls: 3 mm Roof: 3 mm Cross member: INP 180 Lifting bracket Ø 50 mm, hook height 1,570 mm - 2 internal baffle plates - Internal level indicator with float - Dome lid with rubber seal, 50 x 50 cm - 1x C-Storz connection below the level indicator - Front/top vent with shut-off valve - Rear with approx. 50 cm platform - Rear with 1x C-Storz connection - Rear with 1x 6-inch flange -> Watertight welded with 24-hour leak test - Primed once internally, twice externally - Externally painted twice in a single color according to your desired RAL color Nwjdpszhwccjfx Ab Uel Optionally available: - Protective coating inside, according to specifications for the respective application - Fully galvanized version - Anti-slip coating on the roof - A-B-C Storz connection of your choice - Hydraulic dome lid - Additional rear hydraulics for slide valve - Subframe UNP220 for 22t total weight!

Condition: good (used), Year of construction: 1991, machine/vehicle number: 139607, Offer 26215 Technical Data: - Drilling capacity 28 mm Nwjdpfoz Dtxcex Ab Uel - Drill spindle mounting MK 3 - Tapping thread M 12 - Drill spindle speeds: - Level 1: 120 / 215 / 360 / 600 / 1080 rpm - Level 2: 240 / 430 / 720 / 1200 / 2150 rpm - Drilling unit with height adjustment via hand crank - Smallest / largest distance between table and drilling/milling spindle: 60 / 390 mm - Drill spindle stroke 100 mm - Fine feed adjustment of the spindle via handwheel - Drill spindle overhang 260 mm - Coordinate table with 3 T-slots: 600 x 240 mm - Table travel: - X-axis: 350 mm - Y-axis: 160 mm - Drive: 400 V / 0.7 / 1.3 kW - Footprint: approx. W 800 x H 1800 x D 900 mm - Weight: approx. 300 kg

Condition: used, Year of construction: 1995, CNC Milling Machine, Universal Nwodpov Rpr Ssfx Ab Usl Manufacturer: HERMLE Type: UWF 902 H Year of manufacture: 1995 Operating hours: 46,680 Control system: HEIDENHAIN TNC 426 Travel distances X/Y/Z: 600 x 450 x 500 mm Rotary table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions L x W x H approx.: 2,950 x 2,200 x 2,300 mm 21926

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Nwsdpfxoz Dvwuo Ab Uel Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: new, Year of construction: 2026, Brand new, high-precision vertical broaching machine – a machine of exceptionally high quality. CNC-controlled vertical broaching machine with two, three (or four) CNC axes and electronic control of the rotary table with a positioning accuracy of 0.001°. For the efficient production of spline grooves (including tapered and tangential grooves) – keyways, internal and external gears, racks, etc. Nwjdpfjz Dpcqsx Ab Uol CNC control with a 10” color display and touch screen – software for roughing, finishing, and fine finishing (to achieve surfaces with the highest possible quality). Stroke range of the broaching tool holder: 10 to 250. Broaching tool holder speeds: 22 to 90 strokes/min, infinitely adjustable. Broaching tool holder swivel range: +/- 20°. Rotary table size: 450 mm. Bore in the rotary table: Ø 135 mm. Maximum table load: 1,250 kg. Table travel distances, longitudinal and transverse: 250 x 225 mm. Drive power, servomotor for the broaching tool holder: 3 kW. Machine dimensions without control console: 1.3 x 1.45 m x approx. H 2.6 m. Machine weight: approx. 1,700 kg. - Automatic, electronically monitored central lubrication system for the guide rails. - Cutting fluid system for cooling and lubricating the broaching tools. Other models available.