Used Water Slot Milling for sale (17,624)

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: DC, warranty duration: 24 months, compressed air connection: 2 bar, overall weight: 20 kg, filling weight (max.): 1,000 g, filling weight (min.): 100 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: new filling machine suitable for dispensing liquids, pastes, and semi-viscous products, such as: - Disinfectants - Shampoos & lotions - Creams - Honey & jam - Milk & yoghurt - Water & alcohol - Sauces (e.g., pesto) - Etc. Simple, reliable, and immediately deployable This filling machine operates on compressed air and 220V and is fully plug & play. As a result, the machine is very user-friendly and particularly suitable for filling small to medium-sized batches. A small compressor is sufficient to run the machine; one can be supplied if desired. Flexible filling (100 – 1000 ml) The machine is equipped with a 1000 ml cylinder, allowing for a maximum of 1000 ml to be filled per cycle. - Minimum fill quantity: 100 ml - Any quantity between 100 and 1000 ml can be dispensed in a single stroke - Larger volumes can easily be achieved by multiple cycles Hfsdpfx Aaerivwfe Ssf Large hopper & expansion options Standard supplied with a 30-liter stainless steel hopper. There is also the option to connect to an IBC container or 200-liter drum, enabling quick and efficient handling of larger filling volumes. Manual or automatic operation The machine offers: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher volumes Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high-quality construction - Weight: approx. 15–20 kg - Easy to place on a table - Fully made of high-grade stainless steel - Robust, industrial build quality More information For questions, feel free to email us; we are happy to assist you with this or other machines. Additionally, we also offer a labeling machine, which is an excellent combination with this filling machine for a complete filling solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, total width: 42 mm, total length: 101 mm, total height: 67 mm, compressed air connection: 2 bar, overall weight: 17 kg, filling weight (max.): 500 g, filling weight (min.): 50 g, input voltage: 230 V, pressure: 2 bar, tank capacity: 30 l, New Pneumatic Filling Machine / Filler – Plug & Play For sale: New filling machine suitable for precise dispensing of liquids, pastes, and semi-viscous products. Suitable applications include: - Disinfectants - Shampoos & lotions - Creams & gels - Honey & jam - Milk & yogurt - Water & alcohol - Oils & sauces (such as pesto) Hfodpfx Aaeyfg Scs Sof And many other products Reliable, simple, and efficient This machine operates entirely pneumatically and requires only compressed air. As a result, it is very low-maintenance, reliable, and immediately ready for plug & play operation. A small compressor is sufficient to operate the machine; a compressor can be supplied upon request. Flexible fill volume The filling machine is equipped with a 500 ml cylinder, allowing a maximum of 500 ml to be dispensed per stroke. - Minimum fill quantity: 50 ml - Any volume between 50 and 500 ml can be dispensed in a single stroke - Larger volumes are easily achievable by conducting multiple strokes consecutively Large hopper & expansion options The machine features a 30-liter stainless steel hopper. It can also be connected to an IBC container or 200-liter drum, allowing for swift and efficient processing of larger filling batches. Manual or automatic operation The filling machine comes with: - Foot pedal – fill at your own pace - Automatic mode – continuous filling cycle for higher throughput Depending on the product, fill volume, and operator, approximately 15 to 25 units per minute can be filled. Compact & high quality - Weight: approx. 20 kg - Easily placed on a table - Fully constructed from high-grade stainless steel - Excellent industrial build quality Interested or have questions? Do you have questions or would you like more information? Please feel free to contact us via email — we are happy to assist you. We also offer a labelling machine that combines perfectly with this filler for a complete filling line solution. We aim to respond within 24 hours and are available on weekdays from 09:00 to 17:30.

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Hjdpfxonab Sie Aa Seff We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) Hodpfx Aaonab Rls Soff We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l Hedpfjxgua Aex Aa Sjff 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, 1. Waterjet cutting system with accessories, year of manufacture 2005, machine number: 95 246, Model 4060D, including: 2. Machine details: - NC 4060 D (Duplex with 6 cutting heads for abrasive cutting) - 1 x cutting table: 4200 x 6700 mm - X-axis travel: 2750 mm - Y-axis travel: 6470 mm - Z-axis travel (height): 250 mm - Positioning accuracy (X/Y): +/- 0.075 mm/m - Repeatability (X/Y): +/- 0.05 mm - Feed rate X: 10,000 mm/min - Feed rate Y: 10,000 mm/min - Feed rate Z: 4,000 mm/min Technical specifications: - 1 x Fanuc GE 300 i (NANO CNC) SYSTEM Control functions • 15-inch color LCD display (resolution 1024 x 768) • Machine control panel • 1.5 GHz Pentium III processor • Vertical and horizontal soft key bars • Slim operator panel with QWERTY keyboard • 40 GB program storage (hard disk) • 2 MB RAM for part programs • Windows 2000/XP operating system • Hand-held control unit (remote control) for easy axis positioning – 1 x MPG unit – 6 x WJS standard cutting heads mounted on holders (2 x 3 pieces) – 6 x SM 3000 abrasive metering units – 1 x IGEMS Standard or Professional – 1 x documentation – 2 x abrasive storage tanks, 1,500 l each – 1 x sludge removal system, 3 x diaphragm pumps – 1 x wastewater tank 1,500 l – 1 x cascade tank – 1 x new stainless-steel cutting tank (4 x 6.7 m) - 10 m high-pressure hoses with fittings - 1 x KMT high-pressure pump, 100 HP, 4,100 bar, only 9,500 operating hours - Installation and maintenance by WJS personnel Machine connections: Electrical connection: 3 x 400 V+N+PE, 25 A, 50 Hz Compressed air supply: 600 l/min Air pressure (technically dried): 6.5 bar Hfedoxgumcjpfx Aa Ssf

Year of construction: 2001, condition: excellent (used), JAROMA DFOA II MILLING MACHINES Producer JAROMA Machine model / type DFOA II Year of production 2001 Category of machines. MILLING MACHINES Location Hfsdpeh S Uhfsfx Aa Sof Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Remarks JAROMA DFOA edge milling machine In stock - Polish production - Year of production 2001 - unpainted The DFOA-II milling machine is designed to mill the excess veneer to the thickness of the rectilinear or curvilinear element. The veneered side must be perpendicular to the surface, it can also be at an angle of 0-45o or rounded with a radius of R 15-20.

Condition: good (used), functionality: fully functional, Year of construction: 2002, • 4 new EDI cells MK3 are available. • 7 EDI stations, each with 4 EDI cells MK3, will be dismantled. Hfodpfxswy Uu As Aa Ssf

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 21FW100020, The FluidWorker® 100 uses UV-C technology to reduce bacteria in machine tool cooling lubricants in an environmentally friendly and efficient way. It is also successfully used for chemical-free control of bacteria in process water systems, e.g. parts washing systems, cleaning baths, hardening coolants, etc. By using a FluidWorker 100 on the machine tank, biocides that are harmful to the environment and health can be significantly reduced. Biocides are the main cause of allergies, respiratory diseases and skin irritation among machine tool workers. The use of a FluidWorker 100 also generally increases the service life of cooling lubricants by at least 30%, thus saving costs for the replacement and disposal of coolants. Hjdpfoqvzx Nox Aa Soff The FluidWorker® 100 works in the bypass on the machine tank. The necessary installation accessories are included in the package.

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. Hedsxhfl Eepfx Aa Seff High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: used, This listing is for the Veolia/Elga PC1ANRXM2 Purelab Chorus The unit is in full working condition and is ready for immediate release The Veolia ELGA PURELAB Chorus 1 Complete is a high-performance water purification system engineered for laboratories demanding the highest water purity. It is ideal for supporting analytical research, quality control (QC) testing, and pharmaceutical manufacturing processes, delivering reliable Type I ultrapure water. Key Specifications Water Quality: 18.2 MΩ·cm resistivity (Type I) Flow Rate: Up to 20 litres per hour Features: Advanced PureSure® deionization for consistent water quality Fully recirculating system to maintain microbial purity Real-time TOC monitoring to ensure organic purity Integrated filtration for endotoxins, proteins, particulates USB data capture for performance validation Optional ELGA Biofilter for biologically active impurities Cost-effective design supporting QC testing to validate drug purity in pharmaceutical manufacturing Consumables engineered to minimise cost and environmental waste Ideal Applications Analytical Research Life Sciences Hfodpfxexv A Uas Aa Ssf Pharmaceutical QC Testing Glassware Washing and Ultrapure Feed Systems

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Includes the following components, among others. - 55kW Hammer mill 650-375 Hjdpfsq Hr Rzjx Aa Seff - 11kW 1000L Mixer PM1000 - Silos - Bucket weigher - Dosing screws - Elevators - bunkers - Switchgear cabinets

Condition: not inspected (used), Year of construction: 2020, operating hours: 4,809 h, functionality: unexamined, operating pressure: 2,500 bar, overall weight: 2,030 kg, rotational speed (min.): 650 rpm, rotational speed (max.): 1,800 rpm, water tank capacity: 80 l, TECHNICAL DETAILS Working pressure: 600 - 2,500 bar Flow rate: 9 - 26 l/min Drive power: 160 kW / 132 kW motor Speed range: 650 - 1,800 rpm MACHINE DETAILS Hfsdpfxeyx Uwuj Aa Sjf Dimensions & Weight Dimensions (L x W x H): 2,240 x 1,550 x 1,780 mm Total weight: 2,030 kg Input voltage: 400 V Power connection: 400 V / 50 Hz Fuse protection: 250 A Operating pressure water inlet: 2.0 - 8.0 bar Max. inlet temperature: +40 °C Water tank capacity: 80 l Pump speed range: 220 - 610 rpm Engine oil capacity: 10 l Noise level: 75 dB Operating hours: 4,809 h EQUIPMENT High-pressure pump with frequency converter (continuous operation 24 h/day) Standard accessories

Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Hfedpfx Aeym A S Iea Sjf Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit External reference: Bilstein - Lot 2

Condition: not inspected (used), Year of construction: 2008, operating hours: 39,361 h, functionality: unexamined, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, controller model: SIEMENS SINUMERIK 840 D, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the specified timeframe, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse rate, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse rate, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse rate, Slide 3 (Z): 36 m/min Tool holder: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Hsdoym A D Rspfx Aa Seff Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and requires repair. - The Q2 axis (milling spindle tool changer) fails more frequently. - The X2 axis (guideways) moves slightly askew. - The guideways and drives show age-appropriate wear. External Reference: Bilstein – Lot 1

Condition: ready for operation (used), Year of construction: 2000, operating hours: 21,269 h, functionality: fully functional, machine/vehicle number: 0082, turning length: 1,500 mm, turning diameter: 580 mm, travel distance X-axis: 598 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 1,660 mm, TECHNICAL DETAILS Travel X-axis: 598 mm Travel Y-axis: 230 mm Travel Z-axis: 1,660 mm Max. turning diameter: 580 mm Turning length: 1,500 mm Swing diameter over bed: 610 mm Swing diameter over cross slide: 580 mm Main Spindle Main spindle speed range: 12 - 2,800 rpm Spindle bearing diameter: 150 mm Spindle bore: 110 mm Spindle nose: JIS A2-11 Main spindle drive power: 37 (30) kW C-axis accuracy: 0.001° Rapid traverse X/Y: 12,000 mm/min Rapid traverse Z: 20,000 mm/min Rapid traverse C: 100 rpm Cutting feed rate: 0.001 - 1,000 mm/rev Tool Turret Type: H2 ATC Number of tool stations: 2 (1x L-Tool / 1x M-Tool) positions Driven stations: stepless Speed range - driven tool stations: 40 - 3,000 rpm Tool shank height: 25 mm Boring bar holder diameter: 50 mm Tailstock Quill diameter: 120 mm Quill stroke: 170 mm Tailstock taper: MT 5 Tool Magazine Number of tool stations: 50 positions Tool holder: MAS BT 50 Max. tool diameter: 170 mm Max. tool length: 350 mm Max. tool weight: 20 kg Magazine drive: 3.2 kW MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 6.0 x 3.2 x 3.0 m Machine weight: 18.5 t Operating Hours Main switch on-hours: 79,607 h NC operating hours: 27,814 h Main spindle hours: 21,269 h Hfsdpoyxmyujfx Aa Sof EQUIPMENT Chip conveyor Central coolant system High-pressure coolant system, 20 bar Tailstock Signal lamp C-axis Y-axis Hydraulic unit Steady rest Various tool holders (44 pcs.) Three-jaw chuck Schunk - ROTA NC 400-120 Electronic handwheel

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, spindle speed (max.): 7,000 rpm, spindle bore: 42 mm, controller model: Siemens 840 D - SL, counter spindle speed (max.): 7,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Bar diameter: 42 mm Travel X-axis 1/2/3: 180 mm Travel Y-axis 1/3: ±45 mm Travel Z-axis 1/2/3: 704 / 620 / 704 mm Main spindle Speed: 7,000 rpm Drive power: 22 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Counter spindle Speed: 7,000 rpm Drive power: 19 kW / 16.5 kW Spindle torque: 128 Nm / 100 Nm Spindle bore: 42 mm C-axis: 0.001° Spindle nose: 110 mm Tool turret Number of turrets: 2 + 1 pos Number of tool stations: 3 x 12 pos Number of live tool stations: 3 x 12 pos Rotational speed of driven tools: 8,000 rpm Power: 11.4 kW / 2.3 kW Torque: 26 Nm / 14 Nm Tool holder: VDI 25 Rapid traverse (X / Y / Z): 30 m/min Acceleration: 0.5 g MACHINE DETAILS Control: Siemens 840 D - SL Total power requirement: 60 kW Dimensions & Weight Space requirement: approx. 8.2 x 3.3 x 2.5 m Machine weight: approx. 7.5 t Hfodoyxmnxopfx Aa Ssf EQUIPMENT Documentation Knoll chip conveyor High-pressure coolant (14 bar) Parts catcher Counter spindle Interface for bar feeder Spinner Barload BL 0146 bar loading magazine C-axis: 2x 0.001° Hydraulic unit Hainbuch collet chuck Y-axis: 2x ±45 mm Various tool holders Various collets Tool measuring arm

Condition: defective spare-parts repository (used), Year of construction: 2005, functionality: not functional, turning length: 600 mm, turning diameter: 140 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 110 mm, travel distance Z-axis: 360 mm, controller model: Siemens 840 D PowerLine, Hydraulic unit, main and counter spindles defective TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Rapid traverse (X / Y / Z-axis): 25 / 12 / 50 m/min Main spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm Spindle bearing diameter: 110 mm Counter spindle Max. speed: 5,000 rpm Drive power: 20 / 27 kW Max. torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max. bar diameter: 65 mm Travel X-axis: 150 mm Hfjdpfxjyxgc Ne Aa Sjf Travel Y-axis: 600 mm Spindle bearing diameter: 110 mm Turrets Number: 3 Tool holder: VDI 25 x 48 DIN 69880 Number of tool stations: 3 x 12 Number of live tool stations: 3 x 12 Max. speed of live tools: 6,000 rpm Drive power for live tools: 8 kW Max. torque: 16 Nm MACHINE DETAILS Total power requirement: 53 kVA Dimensions & Weight Space requirement: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t EQUIPMENT 2(3) Y-axes +/-35 mm 2 B-correction axes (+/-1°) Chip conveyor Parts catcher Tool breakage monitoring Bar feeder: IRCO Profimat 65.6

Condition: ready for operation (used), Year of construction: 2007, operating hours: 19,357 h, functionality: fully functional, spindle speed (max.): 12,000 rpm, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: Fanuc Series 31i-Model A5, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 520 mm Hsdpfoyw I Htsx Aa Seff Z-axis travel: 510 mm Milling spindle: 12,000 rpm Tool holder: Capto C6 Rapid traverse: 60 m/min MACHINE DETAILS Control: Fanuc Series 31i-Model A5 Chain tool magazine: 48 positions Additional magazine: 90 positions Operating hours Total operating hours: approx. 48,974 h Machining time: 19,357 h EQUIPMENT Coolant system Chip conveyor Note: Clara extraction unit is not included in the scope of delivery.

Year of construction: 2019, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 300 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 150 mm, machine/vehicle number: 24952, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 450 mm Travel Z-axis: approx. 150 mm Hedpeyniuxjfx Aa Seff MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,500 mm Machine weight: 150 kg EQUIPMENT STEPCRAFT MM1000 milling unit External reference: Lot 64 / Wittner

Condition: ready for operation (used), functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item within the specified time frame: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. Hodpoym Ak Defx Aa Sjff TECHNICAL DETAILS Travel X: 190 mm Travel Y: 140 mm Travel Z: 260 mm Tool holder: SK 30 (presumably) Maximum tool clamping length: 35 mm Table dimensions: 420 x 120 mm Jaw width: 60 mm MACHINE DETAILS Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A EQUIPMENT Special machine vice: EMCO vice with 2 slots Mobile workbench: incl. various suitable contents Tool changer: 7 positions Collets Various suitable tool holders Note: An identical machine with the same specifications will be delivered, but not necessarily the exact unit shown in the photos.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 7024NL256160890J, spindle speed (max.): 10,000 rpm, travel distance Y-axis: 200 mm, rotational speed (max.): 4,000 rpm, bar diameter (max.): 80 mm, distance between centers: 700 mm, Condition: Ball screw drives in X, Y, and Z axes replaced; major maintenance package carried out approx. one year ago (machine has not been in operation since)! TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed range: 1 - 4,000 rpm Tool spindle speed: 10,000 rpm Bar capacity: 80 mm Mounting: MT5, revolving tailstock Without center Turret: 12 stations, bolt-on turret Overhang for driven tools: ±100 mm Assemblies: Integrated MK4 bearing for live center Chip and coolant system: Scraper-type chip conveyor with magnetic separator, discharge height approx. 1,000 mm Coolant system: high pressure 5 bar, pump 800 W, delivery rate 20 l/min Hodpjy A Icrofx Aa Seff Coolant shower at chuck, including high-performance pump Compressed air blow-off system for tool holder sleeves Compressed air blow-off system for tailstock live center Line filter for coolant system MACHINE DETAILS Control: M730UM, CELOS - ERGOline Touch Total power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) EQUIPMENT Interface for oil mist separator (diameter: 150 mm) Signal beacon: red, yellow, green, blue EtherNet/IP interface for automation Robot interface for portal robot DMG Mori Seiki Transformer: 45 kVA, three-phase autotransformer X-axis direction ISO Note: The machine is supplied without a chuck, tool pre-setter, or workholding devices.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 61,440 h, functionality: fully functional, machine/vehicle number: 06800003891, rotational speed (max.): 5,000 rpm, controller model: Siemens 840D powerline, Equipment: chip conveyor, documentation/manual, TECHNICAL DETAILS Max. speed: 5,000 rpm Hedpfsyzqtksx Aa Sjff MACHINE DETAILS Control: Siemens 840D powerline Electrical Data Apparent power: 50 kVA Rated current: max. 72 A Current: 80 A Mains voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Voltage: 24 V Operating hours: approx. 76,300 h Spindle hours: approx. 61,440 h EQUIPMENT Pallet circulation system Material conveyor belts for machined parts Chip conveyor Documentation/manual Note: The machine is sold without chuck, tools or raw part holders. Additionally, the seller can offer the following accessories: SMW KNCS225 chuck for €1,500 Ewab pallets (base pallets) 10 units for €500 Extension of transport belts for finished parts €2,000 Basic holder set VDI 40 suitable for the machine, 10 units for €1,000

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens NCU 840 W Serie 2, number of axes: 5, TECHNICAL DETAILS Travel X-axis: 2,500 mm Travel Y-axis: 1,750 mm Travel Z-axis: 1,000 mm A-axis: 20 arcseconds C-axis: 30 arcseconds Hsdeyz Abtepfx Aa Sjff Rapid traverse X-axis: 17 m/min Rapid traverse Y-axis: 17 m/min Rapid traverse Z-axis: 10 m/min Rapid traverse A-axis: 9 rpm Rapid traverse C-axis: 80 rpm Infinitely variable feed X and Y axes: up to 15,000 mm/min Feed Z-axis: up to 4,000 mm/min Table plate: St 52-3 Table dimensions (L x W): 3,631 x 1,200 mm Milling head: FK 115 - SK40 Speed: 14–1,000 rpm Bearing: A9 LC8 CNC A-axis: spindle swivel axis A-axis Swivel angle: ±120 degrees Torque: 450 Nm Speed: 8 rpm Resolution: 20 arcseconds Clamping: hydraulic C-axis Rotation angle: 365 degrees Torque: 580 Nm Speed: max. 8 rpm Resolution: 30 arcseconds Clamping: hydraulic MACHINE DETAILS Control: Siemens NCU 840 W Series 2 CNC controlled axes: 5 Voltage: 400 V 50 Hz Power: approx. 35 kW Weight: 18,500 kg EQUIPMENT Swarf conveyor Sliding door Side window Tool changer stationary at center of machine/ rear crossbeam Disc magazine with 16 stations SK40 Heidenhain length measuring system Note: The seller can arrange an external service provider for the removal of the machine.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel X-axis: 870 mm Travel Y-axis: 500 mm Travel Z-axis: 1,598 mm Main spindle Max. spindle speed: 3,300 rpm Main spindle drive power: 30 kW / 22 kW Max. torque main spindle: 588 Nm Main spindle nose: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Sub spindle Max. spindle speed: 3,300 rpm Sub spindle drive power: 30 kW / 22 kW Max. torque sub spindle: 588 Nm Sub spindle nose: A2-11" Hfsdpfx Aoy Akpnsa Ssf Indexing: 0.0001 Milling spindle Milling spindle drive power: 37 kW Max. torque milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min MACHINE DETAILS Control: Mazatrol 640M PRO Tool holder: SK50 Number of tool stations: 120 Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required floor space (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Infinitely variable speed adjustment 120-position tool magazine High-pressure coolant 70 bar Renishaw Laser measuring system for rotating tools Interface set Air / water cooling through the spindle Overload monitoring system Mayfran Consep 2000 chip conveyor SMW quick-change chuck