Used Water Slot Milling for sale (18,556)

Condition: good (used), Pumpex water pump 300m3/h, 7.5kw Fodpfx Agsvgnvbj Ropb

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm - Blade adjustable (up/down and angle) Fpjdpox Tgtdefx Ag Rsb - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 521 PVC ÜÇLÜ SU TAHLİYE MAKİNESİ, - Possibility of opening a water drainage channel for PVC profiles - Possibility for three groups to work separately - Ability of the water drainage system to operate in angled position - Pneumatic profile clamping system - Fully automated system operation Fpjdpfx Aora Nqteg Reb

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: R7 A-Q-2701, Used CNC lathe Manufacturer: EMCO Model: Hyperturn 665 Fpjdpfx Agjx Tbcyo Rsb Year of manufacture: 2002 Control: 840 D With chip conveyor

Condition: excellent (used), Year of construction: 2023, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 800 mm, table length: 1,200 mm, table width: 1,000 mm, spindle speed (max.): 18,000 rpm, Max. feed rate of interpolating axes m/min 35 Max. power installed kVA 65 Max. current requested A 93 Table length mm 1200 Table width mm 1000 Load capacity (centered and evenly distributed) kg 3000 Air flow required for the pneumatic system Nl/min 400 Working pressure of the pneumatic system bar 6 Distance between the table surface and the spindle nose mm 105-905 (in 4.13- 35.62) Max. horizontal passage mm 1430 Height of table surface over the floor mm 800 (in 31.49) Fpsdpfxex Dihie Ag Rjb The table has 18mm H11 T-slots (central slot H7) for the workpiece clamping, distance 100mm (9 slots).

Condition: like new (used), Year of construction: 2022, operating hours: 800 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle Fpsdpfx Ajx E Dncsg Rob - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: excellent (used), For sale: complete fire-fighting trailer equipped with a professional ALCO MONITOR water cannon. The set is fully mobile – ideal for fire brigade use, fire protection, and securing large areas (fuel depots, sawmills, production plants, storage yards). Technical condition: • ALCO / MONITOR water cannon – heavy-duty cast iron construction • Full adjustment of direction and spray angle (control wheels) • Directional nozzle on extended boom • KALI Anhänger Service GmbH trailer, GVW 700 kg • Hitch: Peka Fahrzeugbau, type DV127 • Two side tanks with filling ports • Shut-off valves, fire-fighting quick couplings • Stabilizing supports with height adjustment • Lighting installation, fenders, wheels in very good condition • Well-maintained, complete, ready to use Applications: Fpodpfsx Edrrex Ag Rsb • Voluntary/Professional fire brigades • Large production facilities • Timber yards, sawmills • Chemical and fuel plants • Securing mass events • Extinguishing fires from a great distance / high water flow

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Fedpsx S Iw Uofx Ag Rspb Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 501 PVC KOL YERİ DELME KANAL AÇMA SU TAHLİYE MAKİNESİ, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of PVC profiles. - Ability of copy head to work on vertical axis - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility to operate triple drilling copy milling cutter or grooving system as one - Comfortable working thanks to the powerful motor - Right conveyor system (1 meter) Fsdpfx Ageramz Ao Ropb

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, machine/vehicle number: A8A R19 52, turning length: 225 mm, turning diameter over cross slide: 250 mm, turning diameter: 80 mm, spindle motor power: 4,400 W, spindle speed (min.): 300 rpm, spindle speed (max.): 6,300 rpm, spindle bore: 25 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, bar diameter (max.): 25 mm, quill stroke: 50 mm, Equipment: documentation/manual, Additional info : 12-station tool turret for VDI16 quick change tools bi-directional logic for driven tools Fpedpfx Aexvb Thjg Rob

Condition: excellent (used), Year of construction: 2024, travel distance X-axis: 4,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,000 mm, table length: 4,000 mm, table width: 2,500 mm, table load: 12,000 kg, X AXIS (WORK TABLE) 4,200mm Y AXIS (SADDLE) 2,600mm Z AXIS (HEAD) 1,000mm Fpodpox Evzusfx Ag Rsb TABLE SIZE 4000mm*2500 T-SLOT SIZE 11x22mmx200mm DISTANCE FROM TABLE SURFACE TO GROUND 890 mm MAX. TABLE LOAD 12,000 SPINDLE TAPER (BT/CAT) BT50/CAT50 SPINDLE SPEED RPM(BT50) 6,000rpm RAPID TRAVERSE(X/Y/Z) 10/10/10M/Min. CUTTING FEEDRATE(X/Y/Z) 1~8000mm/min MAGAZINE CAPACITY FOR ARM TYPE 32 TOOL MAX. TOOL DIAMETER(WITH ADJACENT POCKET EMPTY) BT50-Ø125MM MAX. TOOL LENGTH 300mm MAX. TOOL WEIGHT 20 kg Tool Change Time(T TO T/C TO C) 8/12 SEC.

Condition: excellent (used), Year of construction: 2018, operating hours: 14,000 h, functionality: fully functional, SMX 3100LS (2018) Fanuc-31iB5 X : 630 mm, Y : 300 mm (±150), Z : 2585 mm, A : 2500 mm, B : 240 (±120) deg Max. Length : 2540 mm Turning diameter : 660 mm Swing over bed : 660 mm Main Chuck size : 15" (381 mm) Sub Chuck size : 12" (305 mm) Bar working Dia : 102 mm Main spindle RPM : 4000 Sub spindle RPM : 3000 Milling spindle RPM : 12000 C1 axis : 0.0001 degree C2 axis : 0.001 degree Fpsdpovk Hlpofx Ag Rjb Milling spindle B axis : 0.0001 degree Tool taper : CAPTO C6 Coolant for Milling spindle 70 Bar 80 ATC 4 Long boring bar ATC AICC 600 Blocks Ball Screw cooling system : X axis Linear scales : X, Y, Z, B axis Tool setter Automatic type Hydraulic Steady rest : SMW Autoblok K5.1Z (D100-D410) Auto door Air conditioner Air gun Coolant gun Mist collector Oil skimmer Chip conveyor (Right side_hinged type) Bucket Manual books Linear Guideway MPG handle Transformer

Condition: excellent (used), For sale: a robust horizontal milling machine from the renowned manufacturer VEB Heckert Auerbach (GDR), model FW 250x1000. The machine is in very good condition, complete, fully operational, and ready for immediate use. Fsdew Uab Njpfx Ag Rspb ✔ Technical specifications: • Model: FW 250x1000 • Year of manufacture: 1979 • Manufacturer: VEB Werkzeugmaschinenfabrik Auerbach, Fritz Heckert Combine • Weight: approx. 1,700 kg • Worktable: 250 × 1000 mm, T-slots • Spindle speed range: 630 – 1,800 rpm • Power supply: 3x380 V / 50 Hz • Motor power: 5.8 kW • Control voltage: 220 V • Rated current: 16 A, fuse protection: 25 A • Mechanical and automatic feeds in axes ✔ Equipment included: • Heavy-duty machine vice on the table • Work light • Coolant system • Complete control panel with setting wheels and feed controls ✔ Advantages: • Very stable, heavy-duty design (1.7 t) – ideal for precise and repeatable machining • Renowned manufacturer – Heckert (GDR), known for indestructible machines • Functional and complete – ready to work immediately • 1000 mm table – enables machining of larger components This is a reliable machine, not a cheap, lightweight Chinese construction – just classic engineering from an era when equipment was built to last.

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template – Not repainted Fpodpfx Aox Sylqeg Rjb – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 5000 PVC 3 AXIS CNC MILLING MACHINE, - It can perform DOOR, WING, ARM and SLIDING operations on PVC profiles thanks to 3 different motors. - 3 axis servo motor system - Easy point-to-point programming Fpjdera Nxaepfx Ag Rjb - Unlimited memory capacity - Water drain opening feature (inside) - Metering system with right and left support

Condition: used, Year of construction: 2010, turning length: 6,500 mm, turning diameter: 880 mm, spindle bore: 165 mm, controller manufacturer: Siemens, controller model: 840 D, _____ In General: Year of manufacture:2010 Control system:Siemens 840 D Rotation diameter:900 mm Turning diam.: 880 (750) mm Turning length:approx. 6,500 mm Spindle bore: 165 mm Tool holder:Capto C 8 Spindle: Speed:1,600 rpm Power: 60 kW Torque:4,472 Nm C-axis: 0,001° Spindle boar:165 mm 3-Jaw Chuck: SMW Autoblock KNCS-N-630-165 Tool carrier (X/Y/Z): Technology:Swivel head with milling spindle Speed:6,000 rpm Power:30 kW Tool holder:Capto C 8 Torque:315 Nm X-axis:920 mm Y-axis:500 mm (-200/+300 mm) Z-axis:6,870 mm B-Axis: 200° (-110° / +90°) Tailsstock + Steady rest: Quill diameter:180 mm Quill stroke:200 mm Steady rest slides: 2 pieces, 400 mm wide Steady rest I: SMW Autoblock SLU (45-310 mm) Steady rest II: SMW Autoblock SLU (125-460 mm) Fpsdpfjx Axyljx Ag Rsb Tool magazin I: Technology: Wheel magazine (double) Number of stations: 72 Tool changer: Double gripper on shuttle Tool diameter max.: 110 mm (250 mm) Tool length max.: 800 mm Tool weight max.: 25 kg Tool magazin II: Technology: Pick-up magazine Max. usable length: 1,550 mm Max. usable weight: 150 kg Equipment: Tool magazine:72 stations Chip disposal:Chip conveyor Coolant supply:Internal coolant system Coolant temperature control:Immersion recooler Workpiece measurement: Touch probe Steady rest:2x SMW Autoblock Lynette 3-Jaw chuck: SMW Autoblock KNCS-N-630-165 Tool holder: Various Capto C8

Condition: excellent (used), Year of construction: 2024, travel distance X-axis: 2,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, table length: 3,500 mm, table width: 2,500 mm, spindle speed (max.): 24,000 rpm, torque: 39 Nm, Drives – Linear axes Feed rate X-, Y-, Z-Axis up to 60 m/min Acceleration X-, Y-, Z-Axis up to 3 m/s² Drives – Rotary axes – VH10 Feed rate A-, C-Axis 180 °/s Acceleration A-, C-Axis 700 °/s² Resolution A-, C-Axis 0,0001° Accuracy – Linear axes, according to VDI/DGQ 3441 according to ISO 230-2 Positioning accuracy X- Axis P≤ 0,015 mm A≤ 0,011 mm Y- Axis P≤ 0,017 mm A≤ 0,013 mm Z- Axis P≤ 0,013 mm A≤ 0,010 mm Repeatability X- Axis Ps≤ 0,007 mm R≤ 0,006 mm Y- Axis Ps≤ 0,008 mm R≤ 0,007 mm Z- Axis Ps≤ 0,006 mm R≤ 0,005 mm Milling spindle - 34 kW Spindle power S1 (100% ED) 34 kW S6 (40% / 2 min) 41 kW Spindle speed 24.000 min-1(Permanent grease lubrication ) Fpodpsx Elhqsfx Ag Reb Torque S1 (100% ED) 39 Nm S6 (40% / 2 min) 49 Nm Constant power 8.260–24.000 min-1 Swivel axis – spindle nose 250 mm Tool holder HSK-A63 Tool clamping Spring clamp Tool unclamping Hydraulic Blowing air supply external and through tool Coolant supply external and through tool

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm Fsdpfx Agjx Sq Aao Ropb - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 551 PORTATİF KOPYA FREZE MAKİNESİ, - Used for lock handle, hinge, espagnolette slots and grooving in desired size on aluminum and plastic profiles - Copy assembly suitable for your operation - Various grooving features independent of the copy assembly with the help of the stop OPTIONS - Lower cabinet system - Pneumatic system Fodpfx Agsrcm D Ds Rjpb

Condition: used, Year of construction: 2021, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Fpodpfx Asxv Nknog Rsb Description: Year of manuf. : 2021 Control : Heidenhain TNC 640 Speed : 4000 rpm Movement X/Y/Z : 3500/1200/1500 mm In General: Year of manufacture:2021 Control system:TNC 640 Traverse paths X/Y/Z:3,500/1,200/1,500 mm Gear spindle:4,000 rpm, SK 50 Milling head: Technology:Diagonal head with geared spindle Speed:4,000 rpm Power max.:37 kW Torque max.:644 Nm Index:2.5° Work table: Clamping surface:3,700 x 1,000 mm Load capacity max.:9.000 kg Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 Tool diameter max.:125 (250) mm Tool length max.:400 mm Equipment: Position measuring systems:Directly in all axes Chip disposal:Chip conveyor Coolant supply:IKZ system, 20 bar Touch Probe:Renishaw Set-up mode:Electronic handwheel Software option:Adaptive Control

Condition: excellent (used), CATALOG NUMBER: 6969 TECHNICAL DATA Circular saw: - Max saw blade diameter: 300mm - Spindle: 30mm - Max cutting height: 60mm - Saw blade adjustable front/back - Motor: 2.4kW Milling machine: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 190mm - Lockable spindle - Max cutter diameter: 360mm - Motor: 7.5kW - 2 spindle speed options - Material hold-down - Adjustable side carriage (up/down, front/back) - Angle stop - Pull-out table support - Manual carriage feed - Extraction port diameters: 80mm, 160mm - Dimensions (L/W/H): 1910x1960x1800mm, Weight: 830kg – Polish production – DTR (Technical Documentation) included – Upper control panel – Used tenoning machine, in very good condition Fjdex R Du Hjpfx Ag Rjpb Net price: 13,900 PLN Net price: 3,300 EUR Net price calculated according to 4.2 PLN/EUR conversion rate (In the event of substantial exchange rate fluctuations, the price may be subject to change)

Condition: used, _____ Description: Year of manuf. : 2022 Control : Okuma OSP-P300 SA Turning diam. : 650 mm Turning length : 1000 mm Main spindle: Technology:Motor spindle Speed:4,200 rpm Power:22 kW Torque:427 Nm spindle bore:91 mm Hollow clamping cylinder:86 mm C-axis:High precision package Chuck:SMW KNCS-N 275-86 K8 Sub spindle: Technology:Motor spindle Speed:5,000 rpm Power:22 kW Torque:420 Nm spindle bore:80 mm Hollow clamping cylinder:77 mm C-axis:High precision package Chuck:SMW BHD-FC 210-52-3 Tool carrier X/Y/Z/B: Technology:Milling spindle Speed:12.000 rpm Power:22 kW Torque:120 Nm Tool holder:HSK 63 Y-axis:250 mm (+/- 125 mm) B-axis:240° Tool magazin: Number of stations:80 Equipment: Measuring systems:Direct in X/Y/Z axis (glass scales) Chip disposal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Deltatherm E4 Chip rinsing:working area, manual gun Accuracy package:C-axis high accuracy Software package:5-axis auto-tuning Software option:Multifunction tool Gear cutting software package:Gear hobbing, gear peeling Control extension:Dialogue programming Workpiece measurement:Renishaw measuring probe Tool measurement:Tool setter Fedpfx Ajwu I Irsg Rjpb Tool breakage monitoring:Renishaw TRS2 B-axis:NC function and turning function Bar loader:LNS Quickload Servo III+ Automation preparation:Robot interface Work area door:Automatic Set-up mode:Electronic handwheel

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Fpodpfxovxmy Ne Ag Rsb Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Fpedpfx Aexl Nfqog Rob Tool holders:Various Capto C6 holders

Condition: used, Year of construction: 2024, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2024 Control : Siemens 840 Dsl - Operate Turning diam. : 400 mm Turning length : 1100 mm Main spindle: Technology:Motorspindle Speed:5.000 rpm Power (max.):17 kW Torque (max.):345 Nm Fedjx Ih Rtepfx Ag Rjpb Clamping cylinder:Hollow clamping cylinder Bar capacity:67 mm Workpiececlampig:3-Jawchuck, Schunk Rota THW 315-104 Sub spindle: Technology:Motorspindle Speed:5,000 rpm Power (max.):17 kW Torque (max.):345 Nm Clamping cylinder:Partially hollow clamping cylinder Workpiececlamping:3-Jawchuck, SMW Autoblok 250 BB Movement in Z:1.200 mm Thrustforce (Tailstockfunction):2,5-6 kN Tool carrier (X/Y/Z/B): Technology:Travelling column with millingspindle Speed:12.000 rpm Power (max.):10,5 kW Torque (max.):90 Nm Taper:HSK-A63 Swivelrange in B:+/- 120° In general: Toolmagazine:Chainmagazine, 60 Stations Movement in X/Y/Z:750/200/1.100 mm Rapid travers in X/Y/Z:40 m/min Equipment: Positionsensor:Direct scales in X/Y Chip disposal:Chip conveyor Coolant supply:Internal coolant with Paperbeltfilter and Highpressure, 20 bar Workpiecemeasurement:Renishaw RMP 40 Toolbreakagecontrol:Blum Z-Nano Toolmonitoring:Easy Tool Monitor Automation:Automationpackage (Automatic Door, electrical Interface Robo2Go) Emulsion mist separator:Meachanical extraction, AFS 1100 :Set-up operation. Electronic handwheel Technology cycle:Alternating speed Digital Manufacturing:IoT Connector Further Equipment:Spindlechiller, Rinsing pistol