Used Wmw Drill Machine for sale (460)

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL Kwedpetx E N Tjfx Adwet - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Kedpfxsu Ic Ewj Adwswt Band Leveling Machine with feed equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Year of construction: 1968, Technical details: bore capacity in St 60 - full boring: 40 mm drill capacity in cast iron: 55 mm turning diameter over bed: Ø 22 - 2200 mm clamping diameter: ca.: Ø 100 innen / Ø 200 außen mm Total power requirement: 5,0 kW machine weight approx.: 1,2 t dimension machine xH: 1,70 x 0,80 x 1,40 m Relieving lathe This machine can also be used as a milling head (as a side support). Designation: horizontal unit drilling machine with EB 40 Design: drilling other technical features: Headstock: - Speed 22 - 2000 rpm - feed rate range 0,025 - 0,5 U/mm - three-jaw chuck Ø 190mm with bore Ø 54mm, equipped with internal jaws - headstock bore 45mm - drilling spindle taper MK 5 Operation via control panel on the side of the machine. By removing the lathe chuck, the spindle can be used as a drilling unit. max. slide adjustment 300 mm accessories: -div. outer jaws for lathe chuck i.D. Kjdpfx Adju Iwwzewjwt *

Condition: used, Year of construction: 1980, Technical details: x-travel: 850 mm y-travel: 280 mm z-travel: 355 mm spindle taper ISO: SK 45 / SK 45 spindle head swivable left - right: je 90° ° range of revolution per miute: 28 - 1400 / 18 step U/min distance table/horizontal spindle: min.: 60 / max.: 180 mm Kjdpou Ndf Isfx Adwewt table surface area: 1070 x 270 mm table load: 1000 kg table swivelling +/-: je 45° Grad feed:: X+Y: 16 - 800 und Z: 5 - 250 mm/min total power requirement: 8,0 kW machine weight approx.: 3100 kg dimension machine xH: 2,1 x 1,8 x 2,15 m dimensions electric cabinet: L: 0,8 x B: 0,45 x H: 1,65 m clamping surface area: 315 x 1250 mm Horizontal beam adjustment manual 650 mm mounted on table: clamping head with 3-jaw chuck Ø 200 mm with inner jaws, center height 165 mm Coolant system Hand crank Milling arbor Ø 22 x 620 mm with form cutter 80 x Ø 8 mm *

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Kwsdpfxsu Nfine Adwjt Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t Kedpfxju Nfklj Adwswt dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Technical details: pressure: 40 t throat: 365 mm Kodju Nfuqopfx Adwowt distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Year of construction: 1985, Technical details: Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm passage opening in table: Ø 100 mm ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Kwjdpju Nfvbjfx Adwet Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) *

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. * Ksdpfxsu Nfv Ue Adwjwt

Condition: used, Technical details: height over floor: 930 mm machine weight approx.: 75 +( 27kg Untergestell) kg dimensions L x W x H: 0,6 x 0,48 x 0,43 m EDGE CHAMFERING MILLING MACHINE Application: For chamfering Machine table: WxD: 600 x 240mm with limit stop bar LxH: 400 x 25mm built-in tool: cutter approx. 50mm with 45° milling form Chamfering width approx. 6mm voltage: 380 V with ON/OFF switch Kwodpfsu Ngdtjx Adwjt *

Condition: used, Technical details: grinding length: 450 mm centre height over plate: 120 mm grinding width: 200 mm grinding spindle - swivable: 350 ° grinding head adjustable: 15° re/li ° grinding head adjustable: vertical: 250 mm adjustment of spindle-head: quer/transversal 230 mm spindle revolutions per minute : 2200/3500/5200 U/min work table:: B x L: 120 x 950 mm table movement: quer: 220 mm table movement: längs/longitudinal=500mm mm table adjustment: 5° / 45° rechts / links ° dimensions of grinding wheel: Ø 120x15 mm dimensions of hydaulic: 0,6x0,5x0,9 mm total power requirement: 1,8 kW weight of the machine ca.: 1,2 t dimension machine xH: 1,6 x 1,2 x 1,6 m dimensions of hydaulic: 600 x 550 x 820 mm The tool grinding machine is currently re-equipped as a surface grinding machine. with Orsta hydraulic power unit with dust extraction and various accessories i.D. Kwsdpfsu Ng Ifjx Adwst *

Condition: used, Technical details: grinding spindle - swivable: ja ° spindle revolutions per minute : 2850 U/min work table:: 50 x 134 x 44 mm table movement: X= 265 mm table movement: Y= 165 mm Kjdpfx Adeu Ng N Aswowt dimensions of grinding wheel: Bohrung Ø 20 mm voltage: 380 V / Hz machine weight approx.: 113 kg dimension machine xH: 0,63 x 0,56 x 0,64 m Grinding machine for twist drill cutting angle 30° / 40° Hole of the grinding disc Ø 20mm Adjustment path Z = 230mm manual Headstock can be swivelled 360° via radial scale Table with clamping support LxW: 270 x 100mm for clearance angle 40° and 90°, 3x clamping devices, prism 14mm, as well as test device with 12mm prism and magnifying glass 90mm adjustable Column rotatable 360° Grinding protection 2x 220V sockets *

Condition: used, Technical details: Length: 1000 mm width: 630 mm height: 40 mm height over floor: 680 mm Kwedpfxeu Nki To Adwot weight of the machine approx.: ca.250 kg space requirements of the machine approx.: L:1,0xB:0,63xH:0,68 m Measurement and Controlling Plate material made of special cast with steel supplement surface scraped & surface-gauged 3 single column made of cast iron with steel ball inserts and adjustment thread *

Condition: used, Technical details: table diameter: 450 mm table height: 160 mm Kwsdpfou Nkncex Adwjt rotation movement: 360 Grad passage: 40 mm weight of the machine approx.: 150 kg space requirements of the machine approx.: 650x600x170 mm basis stand area: 620x420mm T-slots : according to DIN 650 und 508 T-slots 8x radial, 4x163mm length and 4 x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm *

Condition: used, Technical details: faceplate diameter: 620 mm internal diameter: 160 mm dimensions: 620x160x140 mm weight of the machine approx.: ca. 160 kg 4 jaws faceplate Kodpfx Aou Nk Dwsdwjwt flange intake/diameter : passage drill hole 160 mm flange diameter 197mm hole circle 235mm jaws are single guided with chuck key The given info are approx. values! *

Condition: used, Technical details: diameter: 250 mm passage: Ø 80 mm width: 106 ohne Flansch mm weight of the machine approx.: auf Anfrage kg dimensions: Ø 250 x B: 140 mm three jaw chuck made of steel incl. chuck key inkl. 2x 3-Backen flange size : Ø 250 x 26mm, fastening with 4 pieces clamping bolts inside divided circle Ø 170mm Kwjdpfxou Nlate Adwjt on Sale with or without flange! i.D. *

Condition: used, Technical details: weight max.: 7,0 t Dimensions (LxWxH): 3,4 x 0,12 x 0,51 m The lifting beam is sold without crane hooks. Type: T-beam, welded sheet steel Lifting eye Ø 80 x 130mm Load-bearing eyelets Ø 45 x 3050mm (center stand) As stated without UVV. (Accident Prevention Rules) Kwsdpju Nvm Rsfx Adwet *

Condition: used, Technical details: width:: 905 depth: 1200 mm height: 2600 mm weight of the machine ca.: ca. 4,0 / pro Winkel t Two of these clamping brackets are for sale. Material made of steel, surface finished Kodpfx Adjval Nrewowt T-slot according to DIN 650: a=22; h=36; b=39; c=17.5 mm, center distance T-slot to T-slot = 250 mm Foot clamping with 4x slotted hole Ø 21 x 30 mm There are 4 M24 holes each on the side wall (left-right) *

Condition: used, Technical details: turning length: 630 mm swing diameter over slide rest: Hinterdrehschlitten: 250 mm center height over bed: 270 mm centre distance: 900 mm spindle bore: 26 mm range of revolutions per minute - continous: 1,8 - 450 U/min return movement speed: 23 / 32 / 46 / 370 / 510 / 740 U/min cross feed: 0,07 - 1,11 / 36 step mm/U longitudinal feeds:: 0,063 - 0,63 / 12 step mm/U tailstock quill taper MT: 5 quill travel: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,9 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Back turning and relief grinding is possible from the front, the back and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swiveling range of the rear slide = 360deg. Kjdpfx Aevbh N Rodwewt Swiveling range of the cross slide = 360degrees Equipment: lathe chuck driving disc Ø 210 mm with fixed tip fixed tip in tailstock with 4 pieces machine feet 3 jaw chuck Ø 250 mm i.D. *

Condition: used, Technical details: diameter: 250 mm width: 80 mm Kwodpovgbhqsfx Adwst revolution per minute: 1800 U/min weight of the machine approx.: 17 kg dimensions: Ø 250 x B: 110 mm Flange mount on base body = Ø 210 x 6 mm, pitch circle Ø 228 mm with 3x M12 holes incl. 3 soft jaws mounted as outer jaws, max. clamping range outside: Ø 60 - 188 mm and max. inside: Ø 17 - 192 mm Equipment: with chuck key *

Condition: used, Technical details: table length: 400 mm table width: 225 mm width:: 400 depth: 225 mm height: 300 mm dimension L-W-H: 400 x 225 x 300 mm Kwedpfowb D H Djx Adwot weight: ca. 34 / Winkel kg 2 pieces available (price per piece) with slotted holes Material made of cast steel Surface finished *

Condition: used, Technical details: width: 400 mm depth: 335 mm height: 500 mm weight of the machine ca.: 100 kg Kwjdsu S Hywepfx Adwst T-slot to DIN 650: T-slot width a= 22; h= 39.5; b= 40; c= 17.5 mm, T-slot spacing 125 mm *

Condition: used, Technical details: pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm Kwjdju N Ay Repfx Adwjt No. 5: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device *

Condition: used, Technical details: floor-plate length: 1345 mm plate width: 845 mm plate height: 28 mm Kwjdpfxsu N Dg Se Adwet weight of the machine ca.: ca. 260 kg transport dimensions LxWxH: 1500 x 900 mm Steel plate, cast steel, used - with diverse mounting holes M12 - with diverse (9x) clearance holes Ø 13mm *

Condition: used, Technical details: floor-plate length: 4750 mm plate width: 1850 mm plate height: 200 mm weight of the machine ca.: 4785 kg steel plate are available for sale. T-slots according to DIN 650 a=42mm; b=74mm; h=65mm distance edge to 1st T-slot = 150mm distance T-slot to T-slot=310mm Kwsdpfxju N Dq Re Adwet *