Surface planer and thickness planer

SCM L´invincibile FS 7

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Kodpfxew Tfyhe Aadjdw Description: Technical Data Working width [mm]: 520 Total table length [mm]: 2310 Cutterhead diameter [mm]: 120 Planer head speed [rpm]: 5000 4 knives [mm]: 35x3x520 Aluminium fence [mm]: 1200x190 Fence tilting adjustment: from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed thicknesser [m/min]: 5-8-12-18 Extraction hood diameter, planing [mm]: 120 Extraction hood diameter, thicknessing [mm]: 120 Standard Equipment and Accessories - Infeed table adjustment via parallelogram system; chip removal adjustable via degree scale - Simultaneous height adjustment and locking of working tables, complete with anti-tilt device - Quick conversion system for switching between surfacing and thicknessing operations (CE version) with special support for opening the surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic system - "READY" electronic control. Includes: * Thickness table adjustment * Manual, semi-automatic and automatic modes, with 99 storable operating programs * Additional functions: calculator and operating hours counter - Machine table height adjustment via 4 steel threaded spindles - Independently powered feed for thicknesser - Rubber-coated outfeed roller - Segmented pressure shoes at infeed - Cutterhead and knife holder with markings as positioning guide, with setting gauge for planer knives - Automatic star-delta starter for main motor - Motor power kW9 Hz50 (kW11 Hz60) (S6 -40%) [S1] kW7.5 HP10 Hz50 (kW9 HP12 Hz60) [S6 -40%] kW9 HP12 Hz50 (kW11 HP15 Hz60) - Operating tools Safety/Protection - Micro safety switch for correct positioning of surfacing tables and extraction hood - Surfacing guard (CE version) - Automatic motor brake for main motor - Thermal overload switch - 110V auxiliary circuit - Emergency stop switch - Lockable main switch - CE declaration of conformity (CE version) R02020 L'invincibile FS 7 CE version 930731 Volt 400 EU 340215 "TERSA" cutterblock with disposable reversible knives 240615 Tilting auxiliary fence for thin workpieces 109999 Standard safety regulations 083228 Base 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim am Main

Condition: new, Year of construction: 2025, functionality: fully functional, height adjustment type: electric, power: 7.5 kW (10.20 HP), Tiltable spindle moulder HOFMANN TFS 107 Basic equipment: 7.5 kW motor, 400 V, 50 Hz, table size 1,200 x 815 mm, heavily ribbed cast iron table, with table rings Electronic starting and braking device Electric height and swivel adjustment in rapid and creep speed accurate to 1/10, height adjustment approx. 145 mm, swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with "fix" quick-release nut left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Paint finish: gray-white/signal blue Electrical connection value: Motor power 7.5 kW - Minimum fuse (A) slow blow 30 Additional equipment installed in this machine: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Infinitely variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard motor with soft start - HOFMANN milling fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel according to display incl. option to switch to tool zero dimension. Digital display for individual jaw adjustment. Including quick clamping system for the fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and fillet board, consisting of 5 rulers, 1 fillet board, 10 sliding blocks - Control panel upwards - Tool compartment for TFS 107 (only possible with top console) - Operating instructions TFS 107 German Kdodpfxju Nz Ndj Aadsw

Condition: new, Exhibition machinemain features:quick changeover system to open the tables,speed, ergonomics and safetywork table adjustment via parallelogramdurable precisiontechnical data:usable working width 520 mmtotal table length 2310 mmcutterhead D 120 mmplaner shaft speed 5000 rpm.4 knives 35 mm x 3 mm x 520 mmaluminum planing fence 1200 mm x 190 mmplaning fence inclination from 90° bi s-45°min./max. planing height 3 / 250 mmfeed speed thickness 5-8-12-18 m/tion stroke diameter dressing 120 mmsuction stroke diameter thickness 120 mmbasic equipment and accessories- work table adjustment in infeed by means of parallelogram system,for chip removal by means of degree scale- simultaneous height adjustment and locking of the work tables completewith anti-tilt device- quick changeover system for changing from dressing to thickness machining(CE version) by means of a special support for opening the dressing tablesand an autom. pneumatic positioning system of the suction hood, withhydraulic system- "READY" electronic control. Includes:* Thicknessing table adjustment* Manual, semi-automatic and automatic modes with 99storable work programs* Additional functions: Calculator and hour meter- Machine table with height adjustment through 4 steel threaded spindles- Feed with independent motorization Thickness- Rubber coated feed roller in outfeed- Link pressure shoes in infeed- Planer shaft and cutter holder with markings as positioning aid, withsetting gauge for planing knives- automatic star delta start for main motor- motor power kW9 Hz50 (kW 11 Hz60) (S6 -40%)[S1] kW7,5 PS10 Hz50 (kW9 PS12 Hz60)[S6 -40%] kW9 PS12 Hz50 (kW11 PS15 Hz60)- Operating toolsSafety/protection- Micro-protection switch for the correct positioning of the dressing tablesand extraction hoods- Dressing protection hood (CE Ausf.)- Automatic motor brake on main motor- Thermal protection switch- 110V auxiliary circuit- Emergency stop switch- Lockable main switch- CE declaration of conformity (CE version)Consisting of:R0.20.20 Linvincibile FS 7 CE version93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz34.02.15 "TERSA" cutterhead with disposable reversible knivesComplete with a set of knives24.06.15 Swivelling auxiliary fence for thin workpieces08.32.28 base Kdodpfjvxr Swjx Aadjw

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AB00033534, planing width: 520 mm, planer shaft diameter: 120 mm, total length of planing tables: 2,310 mm, surfacing fence height: 1,200 mm, number of planer blades: 4, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 5,000 rpm, Equipment: motor brake, Main Features: - Quick-change system for opening the tables - Speed, ergonomics, and safety - Worktable adjustment via parallelogram system - Lasting precision Technical Data: - Usable working width: 520 mm - Total table length: 2310 mm - Cutter block diameter: 120 mm - Planer spindle speed: 5000 rpm - 4 knives: 35 mm x 3 mm x 520 mm - Aluminium fence: 1200 mm x 190 mm - Fence tilting range: from 90° to -45° - Min./max. planing height: 3 / 250 mm - Feed speed thicknessing: 5-8-12-18 m/min - Extraction hood diameter, surfacer: 120 mm - Extraction hood diameter, thicknesser: 120 mm Standard Equipment and Accessories: - Infeed table adjustment via parallelogram system for chip removal by degree scale - Simultaneous height adjustment and locking of the worktables, complete with anti-tilt device - Quick-change system for converting from surfacing to thicknessing (CE version), with special support for opening the surfacing tables and automatic pneumatic positioning system for the extraction hood with hydraulic system - "READY" electronic control. Includes: * Thicknessing table adjustment * Manual, semi-automatic, and automatic mode with 99 storable work programs * Additional functions: calculator and hour counter Kjdpfowwv Ufex Aadodw - Machine table height adjustment via 4 steel threaded spindles - Independently motorized feed for thicknessing - Rubber-coated outfeed feed roller - Linked pressure shoes in the infeed - Planer spindle and knife holder with markings as positioning aid, including setting gauge for planer knives - Automatic star-delta start for main motor - Motor power: 9 kW 50 Hz (11 kW 60 Hz) (S6 -40%) [S1] 7.5 kW 10 hp 50 Hz (9 kW 12 hp 60 Hz) [S6 -40%] 9 kW 12 hp 50 Hz (11 kW 15 hp 60 Hz) - Operating tools Safety/Protection: - Micro safety switches for proper positioning of the surfacing tables and extraction hoods - Surfacing guard (CE version) - Automatic motor brake on main motor - Thermal protection switch - 110V auxiliary circuit - Emergency stop switch - Lockable main switch - CE Declaration of Conformity (CE version) Consisting of: R0.20.20 Linvincibile FS 7 CE version 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 34.02.15 "TERSA" cutter block with disposable reversible knives, complete with one set of knives 24.06.15 Tilting auxiliary fence for thin workpieces 08.32.28 Base

Condition: new, Holzkraft minimax me 35 t s edge banding machine 5507235 For plastic edges from 0.4 - 3 mm, solid wood edges up to 5 mm and workpieces from 8 - 50 mm Top equipment for high productivity with low space requirements! Kodpfxskknbqe Aadsdw Intuitive operation with the eye-S control and 10" large touch screen: HMI Maestro Active Edge; Graphic display of all machining units and their operating status; Graphic simulation of machining operations; Control of all machining units; Regulation of glue pot temperature; Assistance functions for setting up the machine according to the machining program; Error diagnostics for quick correction of simple errors; Statistics on machining parameters; USB connection; Preparation for network connection. Excellent accessibility to the working units thanks to the large hood that ensures protection and noise reduction Monobloc steel construction ensures high stability and rigidity of the machine Automatic aggregate positioning when changing the slab thickness Automatic application of strip edges with edge magazine (me 35 t s): The strip edges of solid wood are automatically loaded and synchronized with the panel guide Panel feed is made by feed chain with rubber glides Extendable workpiece support Quality Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 3314mm width/depth (product) approx. 1085mm Height (product) approx. 1300mm weight (net) approx. 545kg Flush radius milling unit Flush radius milling unit Input power 2 x 0,35kW Flush radius milling unit Cutter diameter HM 55,3mm flush radius milling unit cutter speed 12000min¯¹ flush radius milling unit suction port diameter 2 x 60mm Electrical data Supply voltage 400V Mains frequency 50Hz Glue unit Glue tank input power 0,25kW Glue pot working temperature 190°C Glue tank suction port diameter 60mm Glue tank filling capacity 0,8kg Pneumatic connection Working pressure 6,5bar Feed Feed input power 0,55kW Feed speed 7m/min Edges edge thickness roll material 0,4 - 3,0mm edge thickness strip material 0,5 - 5mm Pre-milling unit Pre-milling unit suction nozzle-Ø 2 x 80mm Pre-milling unit power input 3kW Pre-milling unit cutter speed 7200min¯¹ Pre-milling unit diamond cutter-Ø 80mm Pre-milling unit cutter height 56mm Pre-milling unit material removal 0,5 / 1 / 1,5 / 2mm Scraper aggregate Radius scraper 2mm Buffing aggregate buffing unit input power 2 x 0,14kW buffing unit speed 2800min¯¹ Workpiece workpiece thickness 8 - 50mm Workpiece length min. 120mm Workpiece width min. 110mm Holkraft dealer - accessories available on request!

Condition: new, Year of construction: 2024, Machine is brand new and factory packed. Loading available in our warehouse and can be quickly delivered. ADDITIONAL EQUIPMENT on machine: - automatic lubrication - side suports for long workpieces - Aditional USB key for ''Maestro CNC'' software DRILLING UNIT TECH. DATA: - 8x vertical drilling spindles Kdsdpoip Dh Iofx Aadow - 6x horizontal drilling spindles (2+2 on ''X'' and 1+1 on ''Y'') - drilling speed 4200 min-1 - sawing unit with 125 mm diameter MOULDER TECH. DATA - Motor power: 5,5 KW - spindle speed: from 1000 - 18000 rpm OTHER DATA: - maks/min workpiece length: 3050 / 200 mm - maks/min width: 900 / 80 mm - maks/min thickness: 60 / 10 mm - movement speed: 40 m/min - exhaust outlet: 1x 150 / 1x 120 / 1x 80 mm

Condition: new, cutting diameter 225 mm saw band length 2480 mm cutting width max. 245 x 150 mm voltage 230 V power capacity 1,5 kW Ksdpfenlbmzox Aadedw dimensions of saw-band 2480 x 27 x 0,9 mm mitter cutting 0 - 60 ° cutting speed 20 - 90 m/min weight of the machine ca. 185 kg dimensions of the machine ca. 1,4 x 0,69 x 1,7 m - stepless speed - stepless feed - miter cut - Bi-metal saw band - Material stop - Machine base - Coolant device

Condition: as good as new (ex-display), A demonstration metal band saw machine with base, quick clamping device and coolant device. Cutting range round/ rectangle/ flat 90° 220/ 220x220/ 250x155mm round/ rectangle/ flat 45° 160/ 160x160/ 160x100mm round/ rectangle/ flat 30° 100/ 100x100/ 100x85mm Cutting speed 32/ 66m/min Kdodpfxopgmkyj Aadjw Further Tech. Data see pdf. Document Tech. Date and dimensions: Errors excepted.

Condition: new, Glasslift is the distributor of BG LIFT and UNIC mini cranes, SCHMALZ and RIGHETTI vacuum lifters, SMARTLIFT manipulators, PAUS roofing cranes, and CELA brand spider-type aerial platforms. We are also part of the GGR GROUP, and we have launched our own range of GLW transport trolleys. Thanks to our wide range of equipment, we select machinery tailored to the specifics of each job, offering solutions that meet our customers’ exact requirements. At Glasslift, we not only deliver projects but also provide the right tools for their efficient implementation. Besides sales, we also offer both short- and long-term rental options for the aforementioned equipment. Glasslift is a professional team of operators specializing in comprehensive glass installation, steel handling, and the operation of structural components. Our team of experienced specialists has in-depth knowledge of their fields, is highly qualified, and each of our operators is fully committed to every assigned project. We possess the necessary expertise, technical knowledge, and thorough professional preparation, which means you can place full trust in us. Our skills are supported by positive reviews, references, and published articles about our work — all testifying to our reliability and professionalism. Work with the best to ensure your projects are executed comprehensively and efficiently. For sale: NEW BG Lift Mini Crane Model M060 with Pick and Carry function. By purchasing from the exclusive distributor, you are guaranteed the quality of the machine, spare parts availability, and full service support. Kodpfxoqu Tx So Aadjdw Key specifications: * Pick and Carry function enables both precise load positioning and traveling with the load. * Honda petrol engine, 11.7 hp. * Maximum lifting capacity: 580 kg. * Operating weight up to 1000 kg – easily fits even in small vans. * Arm rotation: 50 degrees. * Black tracks. * Transport width: 78 cm – fits through any doorway. * Standard lifting height: 4.25 m. * Extendable tracks – ensures safe operation on any terrain. The price refers to the following configuration: * Black tracks. * Additional jib increasing outreach by 1 m. * Searcher hook. The price is valid for the basic version and includes machine importation. Please contact us by phone to receive an individual machine quotation in any configuration. Original spare parts available directly from the manufacturer. Service center located in the heart of Poland at the A1/A2 motorway junction near Łódź, equipment base: GLASSLIFT SP. Z O.O. VAT invoice available.

Condition: new, BULLDOG 3 R 950 is a device designed for professional production plants and for skilled craftsmen. Excellent workmanship is guaranteed to you long trouble-free use and high work safety. The grinder is extremely stable, but above all very efficient. Technical data: Working width: 950 mm Min height of processed material: 3 mm Max height of processed material: 160 mm Sanding belt size: 950x1900 mm Sanding belt speed: 18 m/s Feeding belt speed: 4.5/9 m/min Kodpfslc Dn Ujx Aadodw Air consumption: 20/180 L/min Air pressure: 5.5 bar Air pressure for blowing off the sanding belt: 8 bar Extraction port diameter: 150 mm Main engine power: 7.5 kW Power: 400V NEW machine Overall dimensions: Length: 1400mm Width: 1520mm Height: 1800mm