Condition: new, Year of construction: 2023, In the field of 3D Thermoforming, we also offer presses, brushing machines, film storage paternoster, and membrane on machineseeker!
Function:
The feeding tray of the press is in position, the work piece carpet is pressed under the holding device.
With the vacuum it is hold in position and rotated by 180 °. Then the vacuum turns off and the work piece carpet is turned and the applied charge will be processed directly on the turn over device.
Bfpcjrpzjl
Advantages:
• The 3D-thermoforming productivity increases- because of quick clearing the
table
• Savings of time and staff - the preliminary cutting-out of the pressed parts is
removed completely
• Simple handling of the boards
• The foil edges of the 3D furniture doors are not damaged, because the foil is
not pulled over the edge of the door
• Automatic transfer of the whole carpet to a carpet trimming machine is
optionally available.
• The pins will be protected with this turn over system because the cutout of the
over standing foil is made not on the pin table.
Details:
• Rigid welded frame construction to accommodate the machine parts
• Standard size 2800 x 2220 mm x 1200 mm
• Hydraulic power unit
• Turn table consisting of 9 arms with a special surface of rubber
• Vacuum system with hose connections for the turn table
• Turning cycle approx. 18-25 seconds
• Control System: Siemens LOGO
• Protective fences and security devices
For the presentation of the turning process, a video is available.
Condition: new, Year of construction: 2023, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker!
MEMBRANES for membrane presses Silicone and Natural rubber
The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer).
POSSIBLITIES FOR DELIVERY:
The membranes can be cut to the Required size or supplied by roll.
SILICONE
Type: MS-2
Colour: milky white
Surface: textured/smooth
width (standard): 1680/2000 mm
polymer type: Silicone
hardness: 50° Shore
thickness: 3 mm
temperature range: min. -50°C/max.200°C
SILICONE
Type: MS-1
Colour: milky blue
Surface: smooth
width (standard): 1600/1800 mm
polymer type: Silicone
hardness: 45° +/- 3 Shore
thickness: 2 mm
temperature range: min. - 60 °C/max. +230°C
NATURAL RUBBER
Type: MNK-2
Colour: grey
Surface: smooth/smooth
smooth/textured
Gr7zqea
width (standard): 1700-1750 and 2000 mm
rubber: Natural rubber
hardness: 42°Shore
thickness: 2.5 - 4.0 - 5.0 mm
temperature range: min. - 20 °/max. +130°C
NATURAL RUBBER
Special two-part version for
Waterbed / oil-presses
Type: MNK-2 WB
Colour: grey/black
Surface: Both sides smooth
width (standard): 1700 mm
rubber: Natural rubber
hardness: 42°/60°Shore
thickness: 3,5 - 4 mm
temperature range:min. - 20 °/max. +130°C
Standard SILICONE Rubber Sheet Type RSS
Colour: redbrown or transparent (other colours on request)
Surface: both sides smooth
Standard length: cut or 10m rolls (other lengths on request)
Standard width: 1200 mm - up to 1800 mm on request
Polymer: Silicone
hardness: 30° - 80°Shore
thickness: 0.5 - 10 mm
Machineseeker certifies selected sellers with the Machineseeker trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Machineseeker staff.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for you as buyer?
The Machineseeker trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Machineseeker is not liable for legal violations committed by buyers or sellers active on Machineseeker.