Used cNC lathes up to 199mm turning diameter for sale (272)

Condition: used, Year of construction: 2007, turning diameter over bed 0140 mm turning length 285 mm control 810D Siemens turning diameter over bed slide 140 mm swing dia. 300 mm spindle turning speed - stepless 0- 5000 U/min- rpm spindle bore 45 mm feeds 0- 12 m/min voltage 400 V connected load 14 KW face slide travel 250 mm longitudinal travel 285 mm dimensions of the machine ca. 2,7 x 1 x 1,6 m taper diameter VDI 20 mm main drive motor 10,2 kW weight of the machine ca. 1,7 t Machine is without live tooling and without tailstock. Hsdpox Hpyysfx Agwoni

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L28 HS CNC lathe directly from the manufacturer. L28 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop impact switch - Central lubrication - Reference switch - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download free of charge Hnjdpfx Agsymlf Rowsi - Two-year SIEMENS warranty included Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 3.75 kVA Spindle Drive motor S1 operation 2.2 kW Torque drive motor S1 operation 14 Nm Torque at the spindle 28 Nm Spindle holder DIN 6350 A2-3 Spindle cone 5C Spindle bore Ø 30 mm Cooling lubricant system Coolant pump output 95 W Tank capacity 25 liters Machine data Center height 169 mm Center width 430 mm Rotation Ø over cross slide Ø 200 mm Rotation Ø over machine bed Ø 300 mm Speed range Spindle speeds* 40 - 4,000 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Bhajn7pvcu Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 10,000 mm/min. Z-axis 12,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: as good as new (ex-display), Year of construction: 2025, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing Hedpfx Agoymlfkswsni - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hjdpsym A E Iofx Agweni Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: BE55324S, turning length: 300 mm, travel distance X-axis: 100 mm, travel distance Z-axis: 250 mm, overall weight: 5,000 kg, controller model: FANUC SERIES 18i-TB, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Turning length: approx. 300 mm Travel distance X-axis: approx. 100 mm Travel distance Z-axis: approx. 250 mm MACHINE DETAILS Control: FANUC SERIES 18i-TB Connected load: 36 kW Operating voltage: 200/220 V Hnjdpsym Ax Isfx Agwji Frequency: 50/60 Hz Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,000 x 2,200 mm Weight: 5,000 kg EQUIPMENT Main spindle with HAINBUCH chuck Counter spindle with HAINBUCH chuck Double turret, each featuring 12 tool stations Bar feeder by BREUNING SIMAG, type: 42.1 R-3000 External reference: Pieper – Lot 111

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1310370, turning length: 240 mm, turning diameter: 180 mm, spindle speed (max.): 6,000 rpm, bar diameter (max.): 35 mm, controller model: FANUC SERIES oi-TD, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the designated periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. turning diameter: 180 mm Max. turning length: 240 mm Hedpfxsym Ab No Agwjni Chuck size: 6 inch Max. swing over bed: 320 mm Max. bar capacity: 26/35 mm Spindle bearing diameter: 75 mm Max. spindle speed: 6,000 rpm X-axis travel: 120 mm Z-axis travel: 280 mm Rapid traverse X-axis: 12 m/min Rapid traverse Z-axis: 18 m/min MACHINE DETAILS CNC control: FANUC SERIES oi-TD Operating voltage: 200 V Frequency: 50/60 Hz Connection: 23 kVA Dimensions & weight Dimensions (L x W x H): 1,500 x 1,500 x 2,200 mm Weight: 2,000 kg EQUIPMENT 12-position turret External reference: Elos - Lot 7

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Mazak QT10 + LNS Bar Loader Technical Data: Hodpfx Ageym Tx Eswjni Working Area: - Max. swing diameter: 300 mm - Over cross slide: 190 mm - Max. turning diameter: 110 mm - Max. turning length: 256 mm Main Spindle: - Speed range: 60 – 6,000 rpm - Main drive power: 7.5 kW - Constant torque: 96 Nm - Bar work up to max. diameter: 40 mm Turret: - Number of tool stations: 8 Axes Travel: - Turret travel: - X-axis: 100 mm - Z-axis: 290 mm Traverse Speed: - Rapid traverse: - X-axis: 30.5 m/min - Z-axis: 33 m/min - Feed range: 0 – 5,000 mm/min Machine Data: - Total connected load: 23 kVA - Machine weight: approx. 2,700 kg - Machine dimensions (L x W x H): approx. 2.00 x 1.35 x 1.92 m STANDARD ACCESSORIES: - Tool presetting device (MAZAK Tool Eye System) - Fully enclosed work area with coolant and chip protection - Double foot switch for chuck open/close - Chuck status feedback (open/closed) - Work area lighting - Documentation SPECIAL ACCESSORIES: - Automatic chuck open/close M06/M07 - Indicator lamp for machining status - Various tool holders

Condition: used, Year of construction: 2011, turning diameter 160 mm Hodpfeyuzfpjx Agwoni turning length 550 mm control Siemens weight of the machine ca. 9000 kg

Condition: good (used), Year of construction: 2023, functionality: fully functional, For sale: Spinner VC 1150 CNC machining center, X travel 1,150 mm Hsdpoyt Dtgofx Agwsni Y travel 620 mm Fodeycc Hqjm N Uffhopd Z travel 800 mm Direct measuring systems on X/Y/Z axes and TC 600 85 MC, manufactured in 2023 and 2024. Other metalworking tools as shown in the photos are also available. These are vertical machining centers from the German manufacturer Spinner Werkzeugmaschinenfabrik GmbH, designed for precise metalworking applications. The machines are equipped with CNC control units and are suitable for demanding milling and metal part machining operations. Electrical connection is 50/60 Hz, circuit breaker current is 45 A, and nominal current is 50 A. Model: VC 1150 Serial number: VT2158 Year of manufacture: 2023 Model: TC600 85 MC Serial number: VT2158 Year of manufacture: 2024 Machines are located in Germany. Price upon request.

Condition: like new (used), Year of construction: 2021, operating hours: 3,000 h, functionality: fully functional, turning length: 150 mm, turning diameter: 190 mm, spindle bore: 52 mm, spindle speed (max.): 5,000 rpm, power: 44 kW (59.82 HP), Equipment: documentation/manual, Basic design of the machine: 2x TAKAMAZ tool turret with 12 stations / servomotor swivel drive Individual drive for driven tools C-axis control Machine bed in 60° inclined bed arrangement Air blast for clamping device cleaning on both spindles Hardened and precision-ground guideways Work area light 3-color signal light Control panel Electronic handwheel Single set control with handwheel Hnjdpeth Udiefx Agwji Standard tool package Loading magazine Interface CE declaration of conformity, manuals Clamping system: Hydraulic hollow clamping cylinders Main spindle 1 piece HAINBUCH collet chuck size 52 SPANNTOP Axfix system, incl. changing device 1 piece HAINBUCH collet chuck size 52 System SPANNTOP Axfix High-pressure system: Büchele SFB 100 65 bar high-pressure system. 20l/min 2-fold valve changeover. Fire protection system: Kraft and Bauer Co2 extinguishing system with fire damper, pressure relief damper Bar feeder: Top automazioni Fusion 350M LTA extraction system Chip conveyor LMT grease rolling head: F4-1RN with holder Special equipment: Pneumatic ejector and flushing in the counter spindle Manual Guide Blow air on both spindles Chip conveyor, to the right Parts tray, conveyor belt output to the right Helical interpolation Polar coordinates and cylinder interpolation Tool presetter Automatic shutdown Tool breakage monitoring - Tool Monitor Long part removal through the counter spindle CCS Chip Control System

Condition: used, Year of construction: 2015, CMZ TA 20 Y-400 Swing over bed / cross slide: 760 / 600 mm Maximum turning diameter: 460 mm Distance between spindle and tailstock: 473 mm Axes travels X / Y / Z / B: 310 / +70 / −50 / 640 / 640 mm Rapid traverse speeds X / Z / B: 30 m/min Rapid traverse speed Y: 15 m/min Main spindle: Maximum speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Bearing diameter outer / inner: 150 / 100 mm Spindle bore: 73 mm Bar capacity: 66 mm Chuck diameter: 210 mm Tailstock: Quill stroke: 400 mm Tool turret: 12 stations, all driven Maximum speed: 12,000 rpm Power: 11.3 / 8.1 kW Maximum torque: 75 Nm CNC control: FANUC 32i TB Voltage: 400 V / 50 Hz Hnodpfeymc U Ajx Agwei Connected load: 45 kVA Dimensions: approx. L x W x H 2.5 x 1.8 x 2.1 m Weight: approx. 6 t Operating hours: approx. 24,952 h Machining time: approx. 1,247 h Scope of supply: Bar feeder IEMCA KID 80/16, year 2018 Coolant system

Condition: used, Year of construction: 2019, CMZ TA 20 YS-640 Swing over bed / slide: 760 / 600 mm Max. turning diameter: 460 mm Distance between main and sub spindle: 649 mm Axis travels X / Y / Z / B: 310 / +70 / −50 / 640 / 640 mm Rapid traverse X / Z / B: 30 m/min Rapid traverse Y: 15 m/min Main spindle: Max. speed: 4,000 rpm Power: 22 / 15 kW at 366 / 286 Nm Bearing diameter external / internal: 150 / 100 mm Spindle bore: 73 mm Bar capacity: 66 mm Chuck diameter: 210 mm Tool turret: 12 stations, all driven Max. speed: 12,000 rpm Power: 11.3 / 8.1 kW Max. torque: 75 Nm Sub spindle: Max. speed: 4,500 rpm Power: 14 / 8 kW at 292 / 153 Nm Bearing diameter external / internal: 150 / 100 mm Spindle bore: 61 mm Bar capacity: 52 mm Chuck diameter: 175 mm CNC control: FANUC 32i TB Voltage: 400 V / 50 Hz Connected load: 45 kVA Dimensions (L x W x H): approx. 2.5 x 1.8 x 2.1 m Weight: approx. 6.3 t Operating hours: approx. 14,129 h Cutting hours: approx. 321 h Hjdpfx Asymc Sbsgwoni Scope of delivery: - Bar feeder BREUNING IRCO SiMag 80.1-R-3000 II, year 2015 - Coolant unit

Condition: used, Year of construction: 2013, INDEX ABC 65 Distance between main and counter spindle: approx. 250 mm Main spindle: - Spindle bore: 65 mm - Max. speed: 6,000 rpm - Power: 25 / 35 kW at 80 / 120 Nm - Chuck diameter: 160 mm - Spindle bearing (ISO 702/1): 140 mm - C-axis Upper tool turret: - 10 stations Hnsdpfoymbp Sex Agwei - Max. speed: 12,000 rpm - Power: 7.5 kW at 11.25 Nm - Travel X / Y / Z: 140 / ± 50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Lower tool turret: - 9 stations - Max. speed: 12,000 rpm - Power: 9 kW at 10 Nm - Travel X / Y / Z: 140 / ± 50 / 300 mm - Rapid traverse X / Y: 30 / 50 m/min Counter spindle: - Spindle bore: 52 mm - Max. speed: 6,000 rpm - Power: 5 / 9 kW at 10.5 / 20 Nm - Chuck diameter: 110 mm - Travel X / Y: 140 / 300 mm Back machining units: - 8 units incl. 5 driven stations - Max. speed: 12,000 rpm - Power: 6.4 kW at 7 Nm Workpiece and offcut handling unit with gripper: - Travel X: approx. 1,580 mm - Speed: approx. 68 m/min - Swivel angle: approx. 33° - Max. diameter: 65 mm - Max. workpiece weight: 2 kg CNC control: INDEX C 200-4D (based on Siemens Sinumerik 840 D-sl) Dimensions: approx. 4.1 x 2.1 m Required floor space incl. bar loader and coolant/filter unit: approx. 11 x 1.5 x 2 m (L x W x H) Weight: approx. 7 t Power supply: 400 V / 50 Hz Operating hours: 30,431 h Hydraulic hours: 28,806 h Scope of delivery: - Bar loader INDEX MBL - Coolant filtration unit KNOLL KF 150 - Chip conveyor KNOLL 320 S-1/160

Condition: used, Year of construction: 2014, INDEX ABC 65 Distance between main and counter spindle: approx. 250 mm Main spindle: Bore: 65 mm Maximum speed: 6,000 rpm Power: 25 / 35 kW at 80 / 120 Nm Chuck diameter: 160 mm Bearing ISO 702/1, diameter 140 mm C-axis Upper tool turret: 10 stations Maximum speed: 12,000 rpm Power: 7.5 kW at 11.25 Nm Travel X / Y / Z: 140 / ±50 / 300 mm Rapid traverse X / Y: 30 / 50 m/min Lower tool turret: 9 stations Maximum speed: 12,000 rpm Power: 9 kW at 10 Nm Travel X / Y / Z: 140 / ±50 / 300 mm Rapid traverse X / Y: 30 / 50 m/min Counter spindle: Bore: 52 mm Maximum speed: 6,000 rpm Power: 5 / 9 kW at 10.5 / 20 Nm Chuck diameter: 110 mm Travel X / Y: 140 / 300 mm Back machining units: 8 units incl. 5 driven stations Maximum speed: 12,000 rpm Power: 6.4 kW at 7 Nm Hnedpfjymblajx Agwji Workpiece and offcut handling unit with gripper: Travel X approx. 1,580 mm Speed approx. 68 m/min Swivel angle approx. 33° Maximum diameter: 65 mm Maximum weight: 2 kg CNC control: INDEX C 200-4D (based on Siemens Sinumerik 840 D-sl) Dimensions: approx. 4.1 x 2.1 m Required space incl. bar loader and coolant/filter unit: approx. L x W x H 11 x 1.5 x 2 m Weight: approx. 7 t Voltage: 400 V / 50 Hz Operating hours: 18,384 h Hydraulic hours: 16,694 h Scope of delivery: - Bar loader INDEX MBL - Coolant filter unit KNOLL KF 150 - Chip conveyor KNOLL 320 S-1/160 - Additional cooling unit KLH SC 8.K2L.MT-00-IND

Condition: like new (used), Year of construction: 2017, TANDEM 215GL Hsdpfx Aevm Ef Tegwjni

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,700 h, functionality: fully functional, travel distance X-axis: 165 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, controller model: SIEMENS 840 D, Equipment: chip conveyor, TECHNICAL DETAILS X1 travel: 165 mm Z1 travel: 220 mm X2 travel: 165 mm Z2 travel: 150 mm X3 travel: 165 mm Z3 travel: 650 mm Y3 travel: 80 (+50/-30) mm Hjdpsymmdbofx Agwoni Bar capacity: 65 mm Main and sub-spindle speed: 5,000 rpm Turrets: 3, each with 12 stations (all driven) Driven tool speed: 4,000 rpm Tool holder: VDI 30 with drive, DIN 5480 MACHINE DETAILS Control: SIEMENS 840 D Operating hours Power-on hours: 52,511 h Spindle hours: 32,700 h EQUIPMENT C-axis Y-axis Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Condition: used, Year of construction: 1996, operating hours: 7,827 h, functionality: fully functional, machine/vehicle number: 119713, turning diameter over cross slide: 160 mm, turning length: 244 mm, turning diameter: 160 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 155 mm, travel distance Z-axis: 290 mm, spindle motor power: 10,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, total height: 1,780 mm, total length: 2,000 mm, total width: 1,330 mm, quill travel distance: 150 mm, quill diameter: 55 mm, quill stroke: 150 mm, workpiece weight (max.): 25 kg, overall weight: 2,700 kg, bar passage: 40 mm, chuck outer diameter: 154 mm, bar diameter (max.): 45 mm, spindle diameter: 50 mm, Equipment: documentation/manual, rotational speed infinitely variable, The Mazak Quick Turn 10 is a compact CNC lathe manufactured by the Japanese company Mazak. It has been specifically developed for the precise machining of small and medium-sized turned parts and is widely used in mechanical engineering, toolmaking, as well as in series production. Hnjdpfsyt E Nvox Agwei The machine features a robust slant-bed design, a tool turret, and the dialog-based Mazatrol control system, which enables fast programming directly at the machine. This makes it suitable both for single parts and small series production. Control: Mazatrol T-Plus Standard chuck: Kitagawa N-06A0515 The quoted price does not include dismantling, packaging, or shipping. Sale ex location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: 840 Dsl - Celos, _____ Description: Year of manuf. : 2022 Control : Siemens 840 Dsl - Celos Turning diam. : 140 mm Turning length : 235 mm In General: Year of manufacture:2022 Control system:Siemens 840 Dsl -CELOS Turning diameter:140 mm Turning length:253 mm Bar capacity:50 mm Main spindle: Technology:Motor spindle Speed:7,000 rpm Hnsdpeykxmijfx Agwoi Power:24 kW Torque:100 Nm C-axis:0.001°Chuck Sub spindle: Technology:Motor spindle Speed:7,000 rpm Power:24 kW Torque:100 Nm C-axis:0.001° Chuck:Hainbuch clamping top Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:240 mm Y-axis:70 mm (+/- 35 mm) Z-axis:350 mm Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:VDI 25 Tool drive:8,000 rpm X-axis:125 mm Y-axis:70 mm (+/- 35 mm) Z-axis:380 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system incl. temperature control Bar loader:Top Automazioni Parts removal:Parts gripper + cycle belt Tailstock:Below counter spindle Chuck:2x Hainbuch clamping top Tool holders:Various driven and static holders

Condition: new, Year of construction: 2015, 2-spindle 2-turret machine, max. spindle speed 6000 RPM, with feeder (vibrational bowl), robot handling unit and post-process measurement unit. Control system Fanuc. Dimensions 2400 x 1650 x 1790 mm ( main unit ). Hnedpfxolgy U Es Agwei SALE IN EU / SWITZERLAND / UK ONLY.

Condition: good (used), Year of construction: 2008, operating hours: 7,906 h, functionality: fully functional, turning diameter: 85 mm, spindle bore: 25 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 60 rpm, travel distance X-axis: 100 mm, travel distance Z-axis: 300 mm, total height: 1,900 mm, total length: 1,700 mm, total width: 1,300 mm, overall weight: 1,400 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO EMCOTURN E25 Condition: Very well maintained, fully functional Location: Graz Operating hours: approx. 7906h Year of manufacture: 2008 Images: Original images will be provided upon request Technical data: Working area: X-axis travel: 100 mm Z-axis travel: 300 mm C-axis: Resolution 0.001° Bar feeder: Compact Load E45 Turret: VDI 16, 6 driven positions Turning diameter: Ø 85 mm Swing diameter: 225 mm Spindle bore: Ø 25.5 mm Speed: Minimum: 60 rpm Maximum: 6300 rpm Number of tool changer stations: 12 Coolant pump: Yes Machine weight: 1400 kg Dimensions: Length: 1700 mm Width: 1300 mm Hnsdsypcydjpfx Agwsi Height: 1900 mm Contact: Please feel free to contact us to schedule a viewing appointment or to receive an offer!

Condition: used, Year of construction: 2001, turning diameter 660 mm turning length 2000 mm control Fagor 8050 turning diameter over bed slide 370 Hnjdoyuqhgepfx Agwsi spindle diameter 104 mm total power requirement 18 kW

Condition: good (used), Year of construction: 1990, operating hours: 33,000 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 38 mm, spindle speed (max.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, CNC Lathe Maho GR200 C Year of manufacture: approx. 1990 This is a nice, compact machine and I regret having to sell it. Power-on hours: approx. 35,000, spindle hours approx. 10,000, of which approx. 1,000 hours since the spindle bearings were replaced. The machine features automatic tool measurement using Tooleye (currently not in use). Collet chuck Röhm for diameters 3 to 42 mm. 8-position tool turret. VDI20 tool holder. Various tool holders with assorted tools included. The spindle module was renewed by Almendinger about four months ago. The machine is in very good condition; the axes and spindle run smoothly and without issues. Accuracy is excellent. The machine can be inspected and demonstrated under power at our premises. Sold with the accessories shown in the photos. Optionally, a three-jaw chuck from SMC Autoblock, Type KNCS 170/43 incl. various jaws and claw jaws, can be purchased separately. The three-jaw chuck is not included in the price. See photos. Hodpfsyhbatsx Agwoni

Condition: excellent (used), FANUC 21 TB control Swing over bed 180 mm Turning lenght 140 mm Spindle speeds - 6'300 rpm Top turret tool holder with 8 positions Hnsdpfx Agsylbdmewsi Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), EMCOTurn 120 CNC lathe. Hjdpju Rd S Refx Agwjni 160 mm between centers, complete with EMCOTronic T1 control system. Turning diameter: 180 mm, turning diameter over compound slide: 75 mm, spindle bore: 21 mm, speed range: 150-400 rpm, tool turret with 8 stations. Ex-College machine

Condition: used, Year of construction: 2002, COLCHESTER - TORNADO A50 - 2002 - system FANUC Series 21i-T - with bar feeder MBF 1000 - used condition Hjdpfx Agsyl Srnewsni - under power