Used center lathes 0-299mm turning diameter over bed for sale (110)

Condition: ready for operation (used), L & Z lathe / WEILER MATADOR from a vocational training center -Center height approx. 150mm -Swinging diameter over carriage 160mm -Swinging diameter over bed approx. 300mm -Distance between centers approx. 500mm -Spindle bore approx. 36mm -Speed range 30 - 3550 rpm -Automatic longitudinal / cross feeds -Tailstock / MK3 -Three-jaw chuck -Chip guard -Coolant system -Work light -Documentation Iajdpozb Rm Aefx Anvju Dimensions: L x W x H 1.5 x 0.7 x 1.5 meters / Weight 600kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 109640, spindle bore: 82 mm, center height: 330 mm, quill diameter: 75 mm, quill travel distance: 150 mm, total length: 4,200 mm, total width: 1,050 mm, total height: 1,350 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 9 rpm, overall weight: 3,300 kg, torque: 1,500 Nm, KNUTH SINUS 330/3000 Guide and Lead Screw Lathe - Power: 8 kW - Voltage: 400 V - Frequency: 50 Hz - Incl. ACU-RITE digital display - Incl. tailstock, Multifix base, and three-jaw chuck, diameter: approx. 310 mm - Center height: 330 mm Iaodpfjy Twn Eox Anvju - Distance between centers: 3000 mm - Center height in the offset: 435 mm - Length of the bridge: 240 mm - Top slide travel: 145 mm - Cross slide travel: 310 mm - Tool dimensions: 25 x 25 mm - Tailstock taper: MK 5 Note: The item must be collected on a date to be determined between July 14th and 16th, 2026. FCA D-45883 Gelsenkirchen - loaded onto a truck.

Condition: excellent (used), Year of construction: 2017, Weiler Primus VCD (2017) Precision Lathe Manufacturer: Weiler Type: Primus VCD Precision Lathe Year of manufacture: 2016 Commissioned: 2017 Condition: used, very good, like new, new maintenance performed according to factory specifications with acceptance report Operating hours: 1777h Spindle hours: 512h Scope of delivery: - Documentation - Machine feet - Machine lamp - Chuck - Coolant system Iasdpfx Aoy Ti Ikenvju - MultiFix size A

Condition: good (used), Features: - Conventional lathe - Digital display (230 V single-phase power supply) - Longitudinal travel 850 mm, transverse travel 205 mm, vertical travel 95 mm - Programming of 200 auxiliary zero points - 200-tool magazine - Taper measurement - Reinforced prismatic bed, gray cast iron, induction hardened and ground - CAMLOCK D1-4'' spindle Iaedpsy U Ruzsfx Anvou - Hardened and ground spindle, oil-bath lubricated, mounted on 2 high-precision tapered roller bearings - Turning accuracy < 0.015 mm on the chuck - Hardened and ground gearbox gears, oil-bath lubricated - Adjustable gib-free slides - Quick feed change via mechanical gearbox - Automatic longitudinal and transverse feeds - Simultaneous control of the spindle and leadscrew - Lateral movement of the tailstock +/- 10 mm - Maximum diameter above the carriage: 212 mm - Maximum diameter under the gap: 491 mm - Left/right rotation reversal via apron control - Pulse operation - Graduated verniers with zeroing on all axes

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Iaedpfx Anoxp Ru Ujvju

Condition: used, Year of construction: 1993, functionality: fully functional, Weiler / Contec (licensed manufacturing) Matador lathe, year of manufacture 1993, with 3-axis Elesta digital readout, four-jaw chuck, Multifix quick-change toolpost, rear splash guard, and electrical chuck guard. The machine is in good, ready-to-use condition and can be demonstrated under power by arrangement. Iaodpsxp Rvlsfx Anvju

Condition: used, Year of construction: 2002, Technical details: turning diameter over bed: 330 mm turning diameter over support: - mm turning length: 3000 mm centre height: 330 mm spindle bore of work spindle: 82 mm range of revolution per miute: 9 - 1600 U/min feed range: 0,028 - 6,43 mm/U tailstock quill adjustment:: 150 mm tailstock taper MT: MK5 total power requirement: 7,84 kW weight of the machine ca.: 2,9 t dimension machine xH: 4,13 x 1,05 x 1,35 m Iedpfxjy Rk S Ee Anvoau

Condition: excellent (used), functionality: fully functional, Weiler Praktikant R 500 lathe In very good condition, turning test: 100mm, runout 0.005 parallel. Guideways and smooth running in all speeds are flawless. Turning diameter: 280 x 500 Spindle speeds: 42 - 2000 Spindle bore: 36 3-jaw chuck Röhm 160, live center, quick-change drill chuck, lighting, coolant system. Multifix A with 4 holders, additional accessories available upon request. Dimensions: L 1.42m, W 0.6m, H 1.24m, weight approx. 600 kg Iajdpfx Anozbhnqevju Can be inspected while powered on. Free loading at D - 88433 Schemmerhofen.

Condition: ready for operation (used), functionality: fully functional, Includes collet set, 2-axis Heidenhain digital readout, Multifix tool holder. Isdpfoy S Swrsx Anvoau

Condition: good (used), Lathe Angelini MAS 160 (similar to Weiler Primus) Spindle speeds: 45-2840 rpm Iedpfey Ryrhjx Anveau Three-jaw chuck: 140 mm Spindle bore approx. 35 mm Tailstock MK3 Distance between centers: 500 mm Center height approx. 140 mm Coolant system 2 tool holders and various accessories (blue box) The machine has been inspected and runs perfectly

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: Iaedpfx Ajpz Hubsnvou - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen -

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 27 mm, turning diameter: 265 mm, turning length: 750 mm, total length: 1,510 mm, total width: 570 mm, total height: 580 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 115 rpm, bed width: 135 mm, overall weight: 160 kg, METAL TECHNICS POLSKA Professional CNC machines, laser systems and metalworking equipment We are a manufacturer and importer of high-quality metalworking machinery. We supply proven technologies from Poland, Europe and Asia used by hundreds of companies across Europe. Iajdpfoyuc T Ijx Anvju For more than 12 years, we have focused on quality, precision and reliability. TYTAN 750 PREMIUM UNIVERSAL LATHE 0.75 kW / 230V WITH STEADY RESTS The TYTAN 750 universal lathe is a reliable and precise machine designed in a simple and practical way. It is perfectly suitable for home workshops, schools and industrial applications. The machine is equipped with a double prism bed for increased rigidity and machining precision. !!! LATHE STAND NOT INCLUDED !!! !!! MACHINE AVAILABLE FROM STOCK – READY FOR IMMEDIATE SHIPPING !!! TECHNICAL SPECIFICATIONS: • Turning length: 750 mm • Swing diameter: 265 mm • Bed width: 135 mm • Spindle taper: MT4 • Tailstock taper: MT2 • Chuck diameter: 125 mm • Spindle bore: 27 mm • Metric threads: 0.2–3.5 mm/rev • Inch threads: 8–56 T.P.I. • Spindle speed range: 115–1600 rpm • Motor power: 0.75 kW • Machine weight: 160 kg • Dimensions: 1510 × 570 × 580 mm Standard equipment: • Change gears • Chip guard • 4-way tool post • 3-jaw chuck 125 mm • Chuck guard • Chuck key • Set of jaws • 2 dead centers • Fixed and travelling steady rests (2 times heavier and significantly stronger than in comparable models) • Arbor for drill chuck • Drill chuck NEW FEATURE! Tailstock locking system with quick eccentric clamp. Delivery conditions: • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity • English operation manual included If you are interested in other machines, we encourage you to visit our website.

Condition: good (used), Storage location: 3116 Manufacturer: Weiler Type / Model: Primus Iodpfx Anjzaqizoveau Control: conventional Distance between centers: 450 mm Bore diameter: 23 mm Distance from top of bed to center line: 120 mm Swinging diameter over bed: 240 mm over carriage: Speed range: 150 to 3,200 rpm Weight: 650 kg Dimensions: 1,200 x 650 x 1,200 mm

Condition: good (used), Lathe Stock number: 3115 Manufacturer: Weiler Type/Model: Primus Control system: conventional Distance between centers: 450 mm Bore: 23 mm Height of centers: 120 mm Turning diameter over bed: 240 mm Turning diameter over slide: Speed range: 150 to 3,200 rpm Iaedpfx Anszaqihjveu Accessories/Equipment: 3-axis digital display, Heidenhain Weight: 650 kg Dimensions: 1,200 x 650 x 1,200 mm

Condition: used, functionality: fully functional, center height: 180 mm, Parallel lathe PADOVANI 1000 x 180 MODEL: LABOR 180 S Spindle bore: 34 mm Hydraulic chuck Hydraulic tailstock Used, fully operational machine Internal code: svr 407 Iajdjy A Sqtjpfx Anveu

Year of construction: 1986, condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Isdpsn Ard Djfx Anvoau

Condition: good (used), Year of construction: 1992, Centre lathe WEILER Type: PRAKTIKANT 160 B, Year of manufacture 1992, equipped with 3-axis digital readout Heidenhain, 160 mm RÖHM chuck, Multifix B tool holder, tailstock with centre, collet clamping device with collets from 1 to 29.5 mm, coolant system. Turning diameter over bed: 320 mm Turning diameter over cross slide: 198 mm Iasdpfjy Rpr Rox Anvou Turning length: 650 mm Spindle bore: 40 mm Spindle speed: 96 – 2500 rpm Further data see machine card. Guideways are in good condition, machine documentation available.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 170 mm, spindle bore: 75 mm, turning diameter over bed slide: 280 mm, center width: 1,600 mm, spindle speed (max.): 1,320 rpm, TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 170 mm Centre height: 220 mm Centre distance: 1600 mm Isdpfxsy Iwm Ro Anveau Spindle speed range: 25 - 1320 rpm Spindle bore: 75 mm Tailstock quill taper: MT 4 MACHINE DETAILS Machine weight: approx. 2025 kg EQUIPMENT Heidenhain digital readout Multifix tool holder Coolant system Machine lamp

Condition: good (used), Centre height: 125 mm Distance between centres: 800 mm Max. turning diameter over bed/over slide: 280/245 mm Spindle mount, thread according to DIN 800 Spindle bore: 24 mm Iedpfx Asyu R H Nenvjau Infinitely variable spindle speeds: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 inch threads: 4 - 112 TPI Electrical connection: 380 V, 0.7/1.4 kW Required space: Approx. weight: 500 kg

Condition: excellent (used), Year of construction: 1995, Digital display Iodpewhrg Sofx Anvoau Turning diameter 120 mm Turning length 700 mm Spindle speed 2000 min-1 Tailstock

Condition: new, Year of construction: 2026, spindle bore: 38 mm, turning diameter: 178 mm, turning diameter over bed slide: 300 mm, center height: 178 mm, center width: 914 mm, quill diameter: 32 mm, quill travel distance: 100 mm, total length: 1,700 mm, total width: 750 mm, total height: 1,270 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, quill mount: MK 3, incl. 3-axis position display incl. RÖHM lathe chuck incl. quick-change toolholder 'set', Multifix system for further details see data sheet ELMAG warranty: 3 years (upon online registration after purchase) Iaodpfx Aney Iy H Hovsu Delivery throughout Germany: FREE OF CHARGE NOT THE RIGHT MACHINE? WE ARE AN ELMAG AUTHORIZED PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE ELMAG RANGE! REQUEST A QUOTE!

Condition: used, Year of construction: 1971, turning diameter over bed 297 mm turning diameter over bed slide 160 turning length 500 mm short taper holder Größe 5 spindle bore 36 mm spindle turning speed range 30-3550 U/min number of speeds 18 quill adjustment 90 mm tailstock quill taper MT 3 cross adjustment +15 tailstock adjustment - manual 500 mm weight of the machine ca. 610 kg dimensions of the machine ca. 1,4 x 0,7 x 1,2 m cessories: Forkardt V-block chuck, Ø 160 mm Iasdpfey Hxp Djx Anvou Collet chuck, Collets (see photo) Steel Multifix system, size A with 3 quick-change inserts rotating center point chip guard chuck guard fixed steady rest The machine comes from the training workshop of a renowned German corporation.

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm Iodjy Nmg Ajpfx Anvoau PLUS HYDRAULIC MOVEMENT DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD SPARE SWIVELLING WORK HEAD RANGE OF TOOLING

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-5" - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 195 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-5" - Spindle power : 7.5 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.001 [°] TRAVELS - Z stroke : 400 [mm] - X stroke : 150 [mm] Iodpow Efgajfx Anveau - Rapid traverse rate : 36 [m/min] - Spindle / counter-spindle distance : 600 [mm] TURRET 1 - Number of positions : 24 - Number of motorized positions : 12 - X/Z stroke : 400/150 [mm] - Y stroke : +/- 40 [mm] - Live tools speed : 6000 [rpm] - Live tools power : 7.1 [kW] TURRET 2 - Number of positions : 9 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3072X1974 [mm] - Machine height : 1799 [mm] - Machine weight : 6500 [kg] EQUIPMENT - CNC : Fanuc 0i-TF PLUS - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming - 3 colors status lamp - Coolant tank * Coolant through spindle - Chips conveyor : DROITE LNS MH500 - Tool probe - Parts catcher - Parts conveying strip - Predisposition for barfeeder - Electric transformer

Condition: used, functionality: fully functional, center height: 220 mm, Parallel lathe HARRISON 1000 x 220 Model: M 400 Spindle bore: 65 mm Used machine Internal code: SVR 395 Iasdpfx Ajy R Dkujnvsu