Used Machining centers (vertical) X-axis travel 1000-1199mm for sale (356)

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. (preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining Lsdpfx Asxp Rywsa Ioru (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: ready for operation (used), Year of construction: 2014, operating hours: 14,076 h, functionality: fully functional, machine/vehicle number: M7759850937, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, table width: 600 mm, table length: 1,150 mm, TECHNICAL SPECIFICATIONS X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 630 mm Table length: 1,150 mm Table width: 600 mm Maximum spindle speed: 8,000 rpm Tool holder: BT40 Main spindle power: 12.5 kW Tool magazine: 24 positions MACHINE DETAILS Number of axes: 3 Control: HARTROL-M70 Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,300 x 2,500 mm Net weight: 5,500 kg Lrjdpjxq A Ayjfx Aa Isu Operating hours: 14,076 h EQUIPMENT Chip conveyor Documentation CE marking

Condition: like new (used), Year of construction: 2017, operating hours: 12,296 h, functionality: fully functional, machine/vehicle number: 276988, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, table width: 550 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, Excelent machine listed for sale. Location: Pirot, Eastern Serbia. The machine has an additional axis (4th axis). See the pictures included. Times: Power on: 20899 h Auto ope. :12296 h Auto cut. : 11197 h Total cut. : 91330 h Total time: 28380 h Technical data: MAZAK VCN-530C Year: 2017 Control: Mazatrol Smooth G X travel: 1050 mm Y travel: 530 mm Z travel: 510 mm Rapid traverse X/Y/Z: 42/42/42 m/min Cutting feed X/Y/Z: 8/8/8 m/min Tool taper: SK40 Max. spindle speed: 12000 rpm Spindle power (10-40/100%): 18.5 kW Lodpfx Aasw S Huko Isru Tool magazine capacity: 30 stations Table size: 1300 x 550 mm Max. workpiece weight: 1200 kg Infrared measuring probe Tool measurement Tool breakage monitoring Tool life monitoring Fully enclosed work area Work area lighting Chip conveyor Internal coolant supply Coolant unit Cartridge filter Mains fuse: 63 A Total power requirement: 43 kVA Machine weight: approx. 6800 kg

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No minimum price – guaranteed sale to the highest bidder! Lsdexm Txkopfx Aa Ieru The payment deadline for the machine is 20.11.2025! Bidding obligates you to timely collection between 01.12.2025 and 05.12.2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool data Tool magazine: 46 positions Tool holder: ISO-B40 Travel distances X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary tilting table diameter: 800 mm Rotary axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load during transport (with clamped tilting axis): 10,000 N Rotary axis speed: 12 rpm Tilting axis Nominal speed: 3,000 rpm Holding torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotary axis speed: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Power-on hours: 26,997 h EQUIPMENT Technical documentation SK 40 holders ATORN 3D probe Note: The tool holders shown in the pictures are included in the sale and delivery. The tools clamped in the holders, such as drills, reamers, end mills, etc., are not included in the sale and delivery. The drive for the head tilting axis is missing.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 8P31129J5, travel distance X-axis: 1,140 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, controller manufacturer: Mitsubishi, controller model: M720VS, spindle motor power: 15,000 W, Equipment: air conditioning, chip conveyor, documentation/manual, rotational speed infinitely variable, Used vertical 5 axis (4+1) Pinnacle BX300 machining center with tilt head year of construction October 2012 , First installation January 2013 . Low number of working hours . Very good condition. Body made of high quality Meehanite cast iron , hardened to reduce stress to a hardness above HB190 to ensure deformation-free performance for many years.... - ISO40 spindle taper - Electro-spindle 15000rpm - Table size (mm) 1300 x 610 - Travel ranges (X mm) 1140 - Travel ranges (Y mm) 610 - Travel ranges (Z mm) 810 - Max. Table load (kg) 850 - Distance from spindle to table surface (vertical) (mm) 100 ~ 910 - Distance from spindle center to table surface (horizontal) (mm) 355 ~ 1165 - Control MITSUBISHI M720VS - Head tilt - B axis in the range of -120° to +120° - C-axis working in the range of full 360° ( optionally, the possibility of converting the rotary table as A-axis with counter tray with hydraulic lock for blade milling ) Accessories for Pinnacle BX300 Vertical Machining Center • Air blast through spindle • Rotary table as A axis table with the possibility of cooperation with counter disc with hydraulic lock • working in full 360° • Heidenhain measuring scales in X, Y, Z axes and rotary encoders of A and C axes • Spindle cooling 20 bar + low pressure cooling system • RENISHAW OMP60 workpiece touch probe + receiver • RENISHAW TS27R tool measurement touch probe • Chip flushing system • Chain chip conveyor • Telescopic guards for X, Y, Z axes • Full workspace guard with door safety lock • Central lubrication system with oil cooler • Workspace lighting • Signal mast • Flush and blow gun • MPG handwheel • Cooling of the electrical cabinet • air•conditioning unit • 24•position drum tool magazine • Temperature maintenance system for spindle and ball screws (Hollow ball screws with cooling system) • Coolant oil separator • Set of operating tools • Operating instructions in Polish and English and CE declaration of conformity The Mirsubishi M720 SSS control function allows you to optimize the shape that is estimated from command paths to achieve smooth and even machining surfaces, even for heavily stepped surfaces. Lrsdpfx Aasw D Rwbs Ieu

Condition: ready for operation (used), Year of construction: 2022, Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 15000 Lredpfxexl H Atj Aa Iou Number of axis 3 Movement X-Axis Movement 1100 mm Y-Axis Movement 560 mm Z-Axis Movement 510 mm This 3-axis DMG MORI CMX 1100 V was manufactured in 2022. It features a Heidenhain TNC 640 control, 15,000 rpm spindle, and a 30-tool ATC. The machine offers a 1400 × 560 mm table and rapid traverse of 30 m/min. If you are looking to get high-quality milling capabilities, consider the DMG MORI CMX 1100 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2015, operating hours: 50,871 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 720 mm, The machine is in good technical condition, fully functional, and still in operation. A test run is possible. Spindle replaced in 2021. Technical specifications: X axis 1,020 mm, Y axis 610 mm, Z axis 720 mm. Spindle speed: 12,000 rpm. Clamping area of the table: 1,200 × 600 mm. Max. table load approx. 1,000 kg. Spindle speed range: 40 – 10,000 rpm. Spindle power approx. 15 / 22 kW (short-term operation). Spindle taper ISO 40 / DIN 69871. Tool magazine: 30 positions. Rapid traverse (X/Y/Z): approx. 30 m/min. Control: HEIDENHAIN iTNC 530, electric motor with planetary gearbox. Machine weight approx. 8,000–9,000 kg. Machine dimensions (LxWxH): approx. 3,700 × 2,800 × 2,800 mm. Lrodpfsxqrxksx Aa Iju

Condition: used, Year of construction: 1999, x-travel 800 mm Lodpfxovdufde Aa Isru y-travel 650 mm z-travel 550 mm Control Mill Plus auto power on hours ca. 45.000 h turning speed range - main spindle 30.000 min/-1 tool taper HSK 50 E In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, For Sale: Fadal VMC 4020 Vertical Machining Center Well-equipped and reliable vertical machining center — ideal for precision production and toolroom work. Specifications: Spindle: BT-40, 10,000 rpm, 22 HP Lodpfxsxp Unxo Aa Ieru Travel: X = 1,016 mm (40"), Y = 508 mm (20"), Z ≈ 700 mm (extended Z-axis) Table size: 1,219 × 508 mm (48" × 20"), load capacity 680 kg Tool changer: 24-position automatic tool changer (ATC) Control: Fadal 32MP – dependable and easy to use (compatible with FANUC G-codes) Machine equipped with the extended Z-axis for greater flexibility and capable of handling a wide range of machining applications.

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! Lrodjxn Ikwspfx Aa Ieu The payment deadline for the machine is 20/11/2025! Bidding entails the obligation to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Table dimensions: 1,150 x 490 mm Number of tool slots in magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg EQUIPMENT Technical documentation Spare parts (as shown in the photos) Note: Only a 7.5t truck can turn around on the premises. It is advisable to send a smaller truck for collection.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Make: DECKEL MAHO Type of machine: DMC 104 V linear Year of manufacture: 2003 Lrodpfx Ajui Tuwja Iou Control system: Heidenhain TNC 530 Tool holder: SK40 x-travel: 1040mm y-travel: 600mm z-travel: 500mm Speed range: 12.000 min-1 max. Table load: 800 kg Table dimensions: 1250x600 mm Number of tools in the magazine: 30 Stk.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 656 h, Control Unit Model SIEMENS 840D Solution Line Main Drive Spindle speed range 12000 Tool taper SK40 Lrjdpfx Aasxpkp Ee Isu Number of axis 3 Movement X-Axis Movement 1150 mm Y-Axis Movement 700 mm Z-Axis Movement 550 mm Tools Slots in storage 30 Media Oil water separator Yes Chip conveyor Yes Internal cooling Yes Additional Equipment Spray gun IKZ (20 bar) Oil mist extractor Machine cabin roof Touch Probe Heidenhain TS 649 Electronic handwheel Chip Conveyor This DMG MORI DMC 1150V 3-Axis Vertical Machining Centre was manufactured in the year 2017 in Germany and has 656 spindle hours. It is equipped with a DMG MORI / SIEMENS 840D Solution Line control unit and a 12,000 rpm spindle with SK40. The machine comes with chip conveyor, IKZ (20 bar), oil mist extractor, machine cabin roof, touch probe Heidenhain TS 649 and electronic handwheel. Contact us anytime for further questions! Application Types Milling

Condition: used, Year of construction: 2005, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 530 mm, controller manufacturer: FANUC, controller model: 18I MB, total height: 2,920 mm, table width: 600 mm, table length: 1,200 mm, overall weight: 7,000 kg, spindle speed (max.): 8,000 rpm, space requirement length: 4,800 mm, space requirement width: 5,050 mm, CONTROLS .. CNC controls FANUC 18I MB WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 1100 mm .. Y-axis travel: 600 mm .. Z-axis travel: 530 mm TABLE .. table surface (left-right): 1200 mm .. table surface (front-back): 600 mm .. workpiece load (max): 500 kg SPINDLE / HEAD .. spindle revolutions (max): 8000 /min .. tool fixture: ISO BT 40 TOOL MAGAZINE .. number of positions: 24 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 4800 mm .. space requirements -front/back-: 5050 mm .. total height: 2920 mm .. total weight approx.: 7000 kg ATTACHMENTS .. European CE standards: yes Lredpfx Aajxm Rwke Isu Accessories: - 3D measuring probe - Chip conveyor - Cooling system

Condition: good (used), Year of construction: 2004, OKUMA Euro Center V50, year of construction 2004 Control unit: OSP-10M Travels: X-1020 Lsdpfx Aajuh Skao Ijru Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 times

Condition: ready for operation (used), Sigma Zenit 3 machining center Manufacturer: Sigma Type: Zenit 3 Condition: good, ready for operation Power-on hours: 8600h Spindle hours: 1800h Spindle speed: 12,000 Lrsdjxnpi Ispfx Aa Iju Spindle taper: SK40 X-travel: 1000mm Y-travel: 500mm Z-travel: 550mm Tool stations: 50 Chip conveyor Oil mist extraction Through spindle coolant (IKZ) With 4th axis Nikken

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 822441, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN TNC 410 PA, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the item within the timeframe from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travels Travel X-axis: 1,020 mm Lrsdpfx Aexnk S Dea Iou Travel Y-axis: 510 mm Travel Z-axis: 600 mm Spindle speed range: 40–6,000 rpm Drive power: 13 kW Spindle taper: BT 40 Number of tool stations in the tool changer: 22 Rapid traverse X and Y axes: 40 m/min Rapid traverse Z axis: 30 m/min Worktable Length: 1,150 mm Width: 490 mm MACHINE DETAILS Control: HEIDENHAIN TNC 410 PA Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,400 x 2,400 mm Weight: 4,800 kg EQUIPMENT 3D measuring probe Note: The machine vices mounted on the worktable as well as the tool holders (including tools) installed in the tool magazine and spindle are not included in the scope of sale or delivery. The oil mist extraction unit, which may be visible in the photos, is also not included in the scope of sale or delivery.

Condition: excellent (used), Year of construction: 2012, operating hours: 39,150 h, functionality: fully functional, travel distance X-axis: 1,060 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, A machining center from HURCO, used in very good condition, equipped with WinMax control, IKZ, spindle cooler, paper belt filter, chip conveyor. CNC configuration: - Simulation graphics - DXF - NC production package - Industry Standard NC - Pocket with islands - Synchronous thread - Helix - Tool material database - Tool change optimization Lodpfx Asuldhgja Ioru - Ultimonitor Table dimensions LxW 1270x610mm Spindle speed max. 12000rpm Spindle holder SK40 Travel X/Y/Z 1060/610/610mm Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: new, Year of construction: 2025, Ref. -No.: 10457 Manufacturer: IGREK Type: VMC 1160 Year of construction: 2025 Type of control: CNC Control: SIEMENS SINUMERIK 828D Storage location: Istanbul Country of origin: Türkiye X-Travel: 1160 mm Y-Travel: 610 mm Z-Travel: 600 mm Main spindle drive power: 9 kW Spindle Taper: HSK Tool Piece Magazine With: 24 Pcs./pcs. Spindle Speed: 10000 RPM Rapid Traverse X-Axis: 40 m / min Rapid Travel Y-Axis: 40 m / min Rapid Traverse Z-Axis: 40 m / min Machine length: 3500 mm Machine width: 2900 mm Machine Height: 2500 mm Weight Of The Machine Ca.: 8 t Lsdpfx Ajxmd Snja Isru Further information: This is a new storage machine with 0 operating and spindle hours. The machine is available immediately and can be ordered with Siemens or Heidenhain controls. Optional installation and servicing of the machines can be offered.

Condition: used, Year of construction: 2019, travel distance X-axis: 1,000 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZAK, controller model: SMOOTH G, table width: 500 mm, table length: 1,300 mm, spindle speed (max.): 12,000 rpm, CONTROLS .. CNC controls MAZAK SMOOTH G WORKING RANGE -CUBIC- .. X-axis travel: 1000 mm .. Y-axis travel: 530 mm .. Z-axis travel: 510 mm TABLE .. table surface (left-right): 1300 mm .. table surface (front-back): 500 mm .. workpiece load (max): 1200 kg SPINDLE / HEAD .. spindle revolutions (max): 12000 /min .. tool fixture: ISO SK 40 AXIS DRIVES .. feed velocity (max): 8000 mm/min .. rapid traverse: 42000 mm/min Lrodpfx Ajxm Rwdoa Iou TOOL MAGAZINE .. number of positions: 30 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes

Condition: used, Year of construction: 2020, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Lsdexqc H Sjpfx Aa Ijru Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg - Maximum feed rates on all three axes: 10.2m/min.

Condition: good (used), Year of construction: 2014, operating hours: 15,950 h, functionality: fully functional, POSmill E 1100 machining center ITNC 530 (2014) Manufacturer: POSmill Type: E 1100 machining center ITNC 530 Year of manufacture: 2014 Condition: used, good under power ready for demonstration, X-spindle NEW Switch-on hours approx. 43,559h Spindle hours approx. 15.789h Control ITNC 530 Travels POsmill E 1100 X-axis 1100 mm Y-axis 600 mm Z-axis 510 mm Rapid traverse up to 32 m/min Ball screw drives up to 50 mm Feed rate 1 - 10,000 mm/min. Tool holder ISO 40 Speed, max. 10,000 rpm Power, max. 25 kW Spindle/table distance 120-630 mm Table dimensions 1300 x 600 mm Distance floor/table approx. 855 mm Load, max. 1,000 kg Distance spindle/stand approx. 600 mm Number of tools 60 pcs. Tool length, max. 300 mm Tool weight, max. 8 kg Changing time from 5.5 s Weight 8,500 kg - Original documentation Lrjdpfx Aexnpizja Iju - 3D measuring probe - Belt filter system with IKZ 20 bar - Water gun - Air gun - Machine feet - Chip conveyor - HR 410 handwheel - Prepared for 4th & 5th axis Note: Without vices

Condition: ready for operation (used), Year of construction: 2017, Main Drive Spindle speed range 11000 Tool taper ISO 40 Number of axis 4 Movement X-Axis Movement 1050 mm X-Axis Rapid Traverse 44 m/min Y-Axis Movement 540 mm Y-Axis Rapid Traverse 44 m/min Z-Axis Movement 560 mm Z-Axis Rapid Traverse 25 m/min Table Table load 1,300 kg Tools Max weight 7 kg Max tool diameter 65 mm Lrodpsxllm Refx Aa Isu Max tool length 250 mm This 4-axis Akira Seiki Performa V 4 XP was manufactured in 2017. It features X/Y/Z travels of 1050/540/560 mm, rapid traverse rates up to 44 m/min, and a spindle speed of 11,000 rpm. The machine includes a 28-tool magazine, a 4-axis table, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the Akira Seiki Performa V 4 XP machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2008, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,070 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 5,170 mm, total length: 12,500 mm, total width: 6,600 mm, table width: 2,040 mm, table length: 4,200 mm, overall weight: 48,000 kg, spindle speed (max.): 6,000 rpm, Equipment: documentation/manual, CNC Double Column Vertical Machining Centre CNC Control Heidenhain iTNC 530 Table size 4200 x 2040 mm Table load 15.000 kg Number of pallets: 1 Movement X-Y-Z-axis: 4050 / 2600 / 1070 mm Spindle taper DIN 69871a- SK 50 Spindle speed 6.000 RPM Number of tools in magazin: 60 pieces If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock. Lrodpfxsxn Nt Ho Aa Iou

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 2140 mm Measurements depth 3590 mm Measurements height 2630 mm Machine weight 7000 kg Main Drive Spindle speed range 12000 Tool taper ISO 40 Number of axis 4 Movement X-Axis Movement 1020 mm X-Axis Rapid Traverse 36000 mm/min Y-Axis Movement 550 mm Y-Axis Rapid Traverse 36000 mm/min Z-Axis Movement 635 mm Z-Axis Rapid Traverse 30000 mm/min Table Tslots size 18 mm Number of tslots 5 Table load 500 kg Tools Max weight 7 kg Max tool diameter 80 / 150 mm Max tool length 250 mm Lrjdpexllmkefx Aa Isu This 4-axis AWEA AF-1000 vertical machining center was manufactured in 2017. It features a 1020 mm X-axis travel, 550 mm Y-axis travel, and 635 mm Z-axis travel. Equipped with a high-speed 12,000 rpm spindle, ISO 40 taper, and a 24-tool arm changer. Includes a 4-axis continuous table and chip conveyor. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 76,968 h, Control Unit Brand HEIDENHAIN Model TNC 530 Main Drive Spindle speed range 28000 Number of axis 3 Movement X-Axis Movement 1050 mm Y-Axis Movement 800 mm Z-Axis Movement 560 mm This 3-axis DECKEL MAHO DMC 105 V linear was manufactured in 2006. It's a Vertical Machining Centre designed for precision and efficiency in complex milling operations. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 105 V linear machine we have for sale. Contact us for more information. Lrsdpfjxirigex Aa Iju Application Types Milling