Used Double cross cut saws for sale (47)

Condition: excellent (used), functionality: fully functional, OMS double mitre saw for wood and aluminium Specification: • Condition – used, after inspection • Manufacturer – OMS Hodpfx Aaew Htxtjbofn • Main motors – 2 x 2.5 HP • Pneumatic head control • Max cutting length – 351 cm • Min cutting length – 34 cm • Max cutting cross-section – 110x150 mm (at right angle) • Max blade diameter – 300 mm • Extraction ports, diameter 60 mm • Mitre cutting from -45 to +45 degrees (right, left) • Vertical workpiece clamps • Weight – approx. 800 kg • Overall dimensions – 412 x 85 x 130 cm (L x W x H) Additional information: • Very good original technical condition • The attached photos show the actual condition of the machine • Possibility to connect and inspect the device on site

Condition: excellent (used), Year of construction: 2013, I sell the double mitre saw without scoring throughfeed COMEC TD2400 + CA. Working width 167 to 2400mm. Max. saw profile 80 x 100mm Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Hodpfxst Rn Smj Aabefn Motor power 1.85KW + 1.85 KW Magazine for elements. Return of the element to the operator Condition like New. Fully working and ready for use. Possible to try. Available immediately. With CE and complete documentation.

Condition: used, - 2250 mm Cutting width - 80 mm cutting height Hodpohkm A Njfx Aabefn - 2x 3,7 KW saw motors

Condition: excellent (used), Friulmac FN3 formatting feeder Working length min/max 250-2000mm Working width min/max 20-160mm Working height min/max 10-80mm Disc diameter 2x400mm Saw motor 2x3kw Diameters of extraction pipes 2x fi80mm Hydraulic pump motor 1.5kw Adjustable speed 0-50 pcs/min Possibility of direct feeding to a four-sided planer Dimensions 2950x1200x1600mm Hfodpfowgc Ecox Aabjn Weight approx. 1000kg

Condition: used, Year of construction: 1980, Maximum cutting width: 4500 mm Connected load: 9.37 kW Hedpow E D E Usfx Aabjfn

Condition: excellent (used), functionality: fully functional, maximum spacing of aggregates 3.3m two motors 2,2kW each Hsdpfx Asvby T Usabefn inclination of discs adjustment of the cutting angle within -45/+45 degrees maximum diameter of discs 330mm pneumatic clamps disc rotation speed 3765 rpm CE marking

Condition: ready for operation (used), OMGA V113P double saw for frames, strips Specification: • condition - used • manufacturer - OMGA • model - V113P • two 300 mm diameter discs permanently set at a 45 degree angle each • total power 2.2 kW (2 engines of 1.1 kW each) • spindles fi 30 mm • pneumatic clamps Hfjdpfx Aaowgdgnobon • cutting cross-section ~ 100 x 130 mm • original painting • additional tables extending the tops by 100 cm (2 pcs.) • 1993 year of production • weight 225 kg • dimensions 80 x 142 x 132 cm cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site

Condition: excellent (used), Year of construction: 2015, I sell the double mitre saw without scoring throughfeed COMEC TD2400 + CA. Working width 167 to 2400mm. Max. saw profile 80 x 100mm Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Motor power 1.85KW + 1.85 KW Hfsdpfsrcb Tlex Aabjn Magazine for elements. Return of the element to the operator Condition like New. Fully working and ready for use. Possible to try. Available immediately. With CE and complete documentation.

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Hsdpfx Aaew Nbhmobofn Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Condition: used, Double cross-cut saw / format saw Rüco 21 for cutting, trimming and shortening wood or panels. saw: 3 Hfodpfx Aslfdx Ujabon cutting width: max. approx.: 2,050 mm Depth of cut: max. approx.: 2,200 mm Cutting depth: max. approx.: 2,200 mm cutting height: max. approx. 100 mm More technical data: see PDF Further technical data: see PDF

Condition: excellent (used), functionality: fully functional, AUTOMATIC DOUBLE MITRE SAW model OMS SALVARANI INVINCIBILE OK 330 second hand machine working conditions : very good for cutting wood, frames, pvc, aluminium, plastics and various materials oil pneumatic downstroke of the blade groups Hfodpswqdqnjfx Aaben inclination of cutting blade groups + / - 45° n.02 motors . power Hp 3 each one blades diam. mm. 330 max. useful cutting length mm.3500 min. useful cutting length mm.350 max. useful cutting width 90° mm. 165 x 115 H max. useful cutting width 45° mm. 115 x 115 H volt. 380/50 weigth kgs. 700 volt. 380/50

Year of construction: 1983, condition: good (used), RÜCO double crosscut saw Type 22 Year of manufacture 1983 S/N 10860 Working range : cutting size 2600 x 2200mm smallest cutting width 210mm cutting height 100mm with saw blade Ø 450 = 125mm Technical data: Saw blades each 45° tiltable 2 X main motor 4,0 KW, saw blade Ø 400 mm 2 X scorer 0,56 KW, saw blade Ø 140 mm Weight 1400 Kg space requirement approx. 4400 x 4000 H 1000 mm Hodpfxsin E Rqo Aabjfn Transport dimensions approx. 4400 x 1300 H 1300 mm technical data under reserve

Year of construction: 1990, condition: excellent (used), Double cut-off saw STRIFFLER Hfodpsibyknefx Aabsn Cutting length 2,2 m

Condition: good (used), Year of construction: 1997, I sell the double mitre saw BAUERLE DS-II. Cutting length 230 - 1500mm Cutting width max. 1500mm Cutting height max. 145mm Hfodpfx Ajwif T Uoaben 2 2 Vertical pneumatic Material pressures 2 Motors x 4,0kW (5,5 HP) Good condition. Available immediately.

Condition: new, Year of construction: 2025, DOUBLE CROSS CUTTING MACHINE ANGOMAC Double cross-cutting machine, ideal as line machine, for pallet elements production. cutting lenght from 650 to 6500 mm max thickenss 200 mm Hfsdpsfclpfsfx Aabon

Condition: used, Rema type DMGB-35 double cross-cut saw including discharge conveyor belt for cutting wood to length on both sides. This machine was used specifically to cut doors to size. In its current state, the cutting length is limited to 1,000 mm, but can be extended. tape length: approx. 1,700 mm + 2,700 mm cutting width: max. 2,500 mm Hfjdpfx Aev Hgb Noabjn cutting height: max. approx. 80 mm

Condition: used, Year of construction: 1993, with electronic width adjustment Scoring unit Used, good condition Make: Hüllhorst Type: DH 53 Year of manufacture: 1993 Machine no. 4176 Saw units: 2 units Motors: 2 x 3 kW Cutting width: 2100 mm Cutting depth: 2000 mm Cutting height: 90 mm Max. blade diameter: 350 mm Scoring units: 2 motors: 1.1 and 1.7 kW Hfsdpjwbi Eljfx Aabsn Automatic lowering during return travel Electric width adjustment - via electronic control Automatic Clamping width adjustment Removal device Digital display for cutting width Space requirement approx. 3500 mm x 3000 mm x 1100 mm Weight approx. 1500 kg Total connected load approx. 8.2 - 9.4 kW Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. Hfsdjv Aalyspfx Aaben - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Year of construction: 1977, condition: refurbished (used), I sell the double mitre saw Rapid DGS, year 1977. Tilting heads Drilling front heads on each side included Very good condition. Hedpfod N Rb Dex Aabsfn Available immediately.

Condition: good (used), Year of construction: 2000, I sell the double mitre saw OMGA TR2A. Cutting length 390 - 3000mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures Hfsdpfx Aotwbcyjabsn 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: like new (used), Year of construction: 2012, I sell the wooden window assembly table OMGA BA825 (+A+U). Year 2012 Hfodst Ndz Ujpfx Aabon All complete. Very good condition. Available immediately.

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Hfjdpfxeg Tumcs Aabjn Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.