Condition: like new (used), Year of construction: 2005, Dowel and slot mortising machine GANNER GANNOMAT JUNIOR 323 Gcjdpfxoxqy Dno Ah Doa Very good condition, the machine is absolutely like new. It comes from an educational institution that was closed approximately one year after the machine was purchased. The machine has a maximum of 10 operating hours. With this machine, you can mill slots and drill dowel holes on two levels without reclamping. 380V, 1500W 2800 rpm Year of manufacture: 2005 With this machine, you can mill slots for, for example, lock cases and similar parts, or produce all types of frame dowel joints—at right angles, butt joints, and mitre joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and stair manufacturing, and similar applications. Thanks to two-level drilling, stop grids, and the overall design, dowel joints can be produced extremely quickly, making the machine highly economical. Features: - 2 fold-out table extensions - Machine requires a compressed air connection (6 bar, very low air consumption) - Right-hand rotation - Very clean and precise milling and drilling - Supplied with 2 angle stops (one center stop and one side stop, which can be used on both sides) - Also includes an adjustable mitre stop - At the front of the working table, there is a 2000mm long stop rail with two flip stops each. The stop rail can be shortened or extended as required. - Workpiece clamping is carried out with 2 pneumatic clamping cylinders - Height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch is at the front of the machine, enabling fast repositioning and level changes - Heights of the individual drilling levels can be read on 2 mechanical counters, above which there are setting screws to adjust the drilling heights - With a precision 12mm indexing rail, featuring a center index and 12 indexes to the left and right - Can be quickly converted for slot mortising; the machine can then be used without indexing and with 2 adjustable stops left and right, giving a maximum working width of 420mm - Max. drilling height: 100mm - Max. drilling depth: 150mm (with stop and scale) - Max. workpiece height: 160mm Everything works perfectly. The machine will be delivered and demonstrated personally by us throughout Germany for €220, so there is no risk for you when buying. Delivery to Austria and the EU is also possible upon request. The machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle. Professional machine, not DIY store scrap. Ready for immediate operation. Includes 2-jaw drill chuck up to 20mm. Very sturdy and durable construction. Precision linear guides with play-free ball bearing bushes are in good condition and move smoothly.

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Gcjdpfx Ahoxnlfle Dea Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, rotational speed (max.): 2,800 rpm, TECHNICAL DETAILS Minimum panel length: 170 mm Maximum panel length: 2,500 mm Minimum panel width: 50 mm Maximum panel width: 700 mm Drilling head positioning: NC Spindles for vertical drilling: 40 Spindles for horizontal drilling in "Y" direction: 6 Motor power: 3 kW Max. speed: 2,800 rpm Spindles for vertical drilling: 4+4 Motor power: 2.2 kW Max. speed: 2,780 rpm MACHINE DETAILS Gedpexw U Arsfx Ah Djca Number of injectors: 2 Number of storage tanks: 2 EQUIPMENT Control system: WINDOWS Wooden dowels Ø8 Note: Tools are not included in the offer.

Condition: used, Used machine Gsdpfx Ahsxwz N Eo Djca Availability: approx. mid/end of January 2026 Location: Hesse

Condition: excellent (used), Catalogue number 7787 TECHNICAL SPECIFICATIONS - Tool diameter: 14mm - Maximum drilling depth: 170mm - Maximum milling length: 180mm - Adjustment of drilling apparatus front/rear - Table adjustment up/down and sideways - Table swivel angle: +/-20˚ - Working table dimensions: 620x280mm - Material clamping - Motor power: 1.5kW - Brake - Dimensions (L/W/H): 1070x660x1250mm - Weight: 300kg ADVANTAGES – Polish production – Very good condition – Used drilling machine Net price: 5900 PLN Net price: 1400 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR Gsdpfx Ajxt It Aeh Doca (In the case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 1988, operating hours: 9,807 h, functionality: fully functional, machine/vehicle number: 17483, NOTTMEYER KOMET SUPER S/PN Gcedpfex Af D Rjx Ah Dja - very well maintained - fully functional - available immediately

Condition: used, Year of construction: 1977, operating hours: 250 h, functionality: fully functional, machine/vehicle number: 704384, drilling depth: 80 mm, total length: 1,500 mm, total height: 1,200 mm, overall weight: 640 kg, drill spindle length: 100 mm, compressed air connection: 5 bar, working width: 1,200 mm, height adjustment type: mechanical, space requirement width: 1,200 mm, pressure: 5 bar, power: 4.4 kW (5.98 HP), Machine in excellent condition. Inspection by appointment. Gcjdpox Dbg Rjfx Ah Dja

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Gedpsxwaz Hjfx Ah Djca

Year of construction: 1983, condition: good (used), Window handle drill Godjirt Ehepfx Ah Doca

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Equipment and technical data: Manufacturer’s information: "Achieving optimal work results begins with precise, continuous processes, accurate working methods, and reduced tolerance for errors. The result is quality down to the last detail — and our processing machines are designed to meet your professional standards. That’s why we have developed a drilling and fitting insertion machine that makes operation and adjustments even more user-friendly — MINIPRESS top. New features enable quick and precise handling, improving your workflow for increased accuracy, efficiency, and quality. Combined with EASYSTICK, the MINIPRESS top offers an optimal package for all drilling operations on carcasses, doors, and fronts. EASYSTICK is the automated, easy-to-adjust stop system for drilling and fitting insertion machines. From rapid and easy machine setup through to perfect results, your entire process is optimized: the drilling positions are determined digitally, the stops move automatically and guide you step by step to the correct positions: place the workpiece, drill, finished! With EASYSTICK, planning and processing on the MINIPRESS top are digitized. You can plan directly at the machine or import your project data from the cabinet configurator quickly and easily via WLAN or USB stick. The imported production data can be accessed and processed directly. The EASYSTICK computer also allows you to make processing settings directly on the MINIPRESS top. Enter carcass and front dimensions, select fittings: EASYSTICK automatically calculates the drilling positions for you. Thanks to EASYSTICK, the MINIPRESS top automatically controls the stop positions. The drilling carriage travels along the Y-axis automatically while the worktable and fence remain stationary — simple to set up and precise. With the MINIPRESS top, you can achieve a reach of up to 350 mm by moving the drilling carriage. This allows, for example, centered rows of holes even with deep cabinets. With the MINIPRESS top, you only need one machine for all vertical and horizontal drilling operations. The horizontal boring unit of the MINIPRESS top allows for precise construction drilling, e.g., for dowels and connectors. The horizontal boring unit is easily accessible and straightforward to adjust and operate." - with 9-spindle line boring head, 32 mm pitch, with positioning pin - with horizontal boring head (3 spindles) - with gearbox for furniture hinges (3 spindles) Gjdpfx Ahoxwz Ibe Dsca - with gearbox for straight mounting plates, cabinet connectors (2 spindles) - with gearbox for carcass rails/front fittings (8 spindles) - with extraction set, 125 mm Availability: approx. mid-April 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: AB/222595, total width: 1,950 mm, total length: 2,300 mm, total height: 1,850 mm, empty load weight: 1,240 kg, Equipment: CE marking, MACHINE DETAILS Dimensions & Weight Godsxw R R Espfx Ah Djca Dimensions (L x W x H): 2,300 x 1,950 x 1,850 mm Unladen weight: 1,240 kg Voltage: 400 V Power consumption: 10 A EQUIPMENT CE marking

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 980275865, workpiece weight (max.): 1,500 kg, space requirement height: 2,600 mm, space requirement width: 1,700 mm, space requirement length: 3,000 mm, The machine was in production use until recently. It has now been dismantled and stored at our facility. The machine can be inspected by appointment. If you have any further questions about the machine, please feel free to write to us or call us. Gedpfx Ahoxclk De Deca

Condition: new, SHOWROOM MACHINE For sale is an as-new Teknatool Nova Voyager DVR 18" pillar drill with a 2 HP magnetic motor. The showroom machine is in its original condition, so you receive the full warranty. Technical data Gcsdpfjxu Dfkox Ah Dsa - Working area diameter: 18" = 457 mm - Distance spindle centre to column: 228.5 mm - Drilling depth: 152 mm (spindle travel) - Spindle taper: MT2 - Drill chuck clamping range: 1-16 mm - Forward/reverse rotation - Keyed drill chuck The machine is located in A-5431 Kuchl and can be inspected and collected at any time during our opening hours. Subject to prior sale!

Condition: excellent (used), very good condition. video available. Gcodpfx Ajxyxh Djh Dea

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, compressed air connection: 5 bar, From business closure Schleicher dowel drilling machine DBS 1000 Year of manufacture: 1979 Also ideal for line boring with 5mm holes, 32mm spacing Comes with 25 pcs. 5mm carbide-tipped brad point drills and 8mm carbide drills, as well as 16mm and 35mm drill bits for cup hinges and other drill bits Pneumatically tiltable to horizontal/vertical position Machine is mobile Payment in cash upon collection No warranty Gsdpex Avf Ssfx Ah Djca

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 Equipment and technical data: smooth operation Spindle MK 3 Motor: 400 V, 0.55 kW Availability: approx. mid-April 2026 Gcedpfx Ahjxwz Nfe Dsa Storage location: Hesse

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar Gjdpfx Ahed Supgo Deca compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: excellent (used), HOLYTEK YOM-110 oscillating drilling machine Oscillation width max 110mm Maximum depth of hole 50mm Spindles rotation speed 9500r.p.m Table tiltable up to 20° Tools mounted with clamping cage CE certificate Gsdpfx Ahju Efhcj Dsca

Condition: used, Year of construction: 2019, functionality: fully functional, Manufacturer: Vitap Model: ALFA 27T Year: 2019 Type: drilling TECH DATA Dimensions of the work surface 1062 mm Width/ 365 mm Length Mandrel No. 27/ Weight in Kg 288 Drill run = 80 mm Panel dimensions Depth min.10/ max.70 Length min. 150 / max. 3200 mm Width min. 100 / max. 800 mm Working area Front 2000 mm Side 2500 mm Back 2000 mm Gjdpsxwwl Ajfx Ah Doca Engine power and absorption Hp 2.5 / 1.85 KW Materials: solid wood, laminated and non-laminated chipboard panels, MDF.

Condition: excellent (used), Holzma B14/4 drilling machine in excellent condition. Ready for operation. Video of the machine in operation available. Gedexyxgtopfx Ah Doca

Condition: new, Year of construction: 2021, Horizontal CNC drilling machine for hinges or dowels, etc. The CNC drilling machine is designed for horizontal side drilling in wooden panels, furniture boards, etc. It is most commonly used for drilling hinge holes. Thanks to CNC control, machining is carried out automatically according to the entered program. Gcodpfx Asxwnvfeh Dsa Machine bought new in 2021 as a backup, only used a few times for testing. TECHNICAL DATA Spindle motor power - 2.2 kW Max spindle speed - 24,000 rpm Table dimensions - 550 x 3,000 mm Z-axis travel - 34 mm Number of clamps - 8 Power supply - 400 V Machine dimensions - 3,400 x 1,800 x 1,300 mm

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2013 Features and technical data: - Interchangeable drilling gears for: Gjdexwz Nxepfx Ah Dsca - Line boring - Hinges - Mounting plates - Connecting fittings - Front fittings - Line boring gearbox can be used rotated 90° - Pneumatic hold-down device - Drilling gearbox system for quick change of vertical drilling modules - Vertical drilling gearbox: Motor power 1.6 kW - Vertical drilling gearbox: Speed approx. 2,780 rpm - Power supply: 400 V, 3-phase, 50 Hz - Maximum drilling depth / Y-adjustment: approx. 550 mm - Extraction connection: 100 mm Dimensions: approx. 940 x 1560 x 980 mm Weight: approx. 125 kg The above information is given without obligation until the machine arrives at our warehouse. Availability: approx. mid / end of January 2026 Location: Hesse

Condition: ready for operation (used), Year of construction: 2003, Rilesa VLG 1524 3 drilling units from above 2 right/left aggregates Gcjdpfx Aeu Shzfsh Dea

Condition: excellent (used), Single-sided oscillating drilling machine PADE MSO Gcedpexpdr Tofx Ah Dea Maximum hole width: 100 mm Maximum hole depth: 55 mm Maximum tool diameter: 13 mm Tool speed: 10,000 RPM Main motor: 2.2 kW Oscillation motor: 1.1 kW Worktable tiltable at angle +/-15° Pneumatic material clamp Pneumatic worktable feed CE Certificate

Condition: used, Year of construction: 1997, Used machine Gcedsxwz Ihspfx Ah Dsa Year of manufacture: 1997 Condition: well-maintained Equipment and technical data: - Number of drilling spindles: 21 pcs, 32 mm pitch - Drilling direction: from below and end-face - Swivel: 0–90 degrees via handwheel - Pneumatic material clamps: 3 pcs - Passage: max. 100 mm height and max. 640 mm width - Motor: 1.5 kW - Extraction connection diameter: 120 mm - Includes a variety of stops (see pictures) Availability: approx. mid-April 2026 Storage location: Hesse