Condition: used, Year of construction: 1986, grinding wheel diameter 300 mm table length 0 mm table width mm total power requirement 11 kW weight of the machine ca. t dimensions of the machine ca. m Pedpfx Aet Hwzvslwsgt Cut-Off Machine for Hard Materials, Coolant, Hand Lever11 kW

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm Pjdpfx Alet Hw Nmswjgt clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Pjdpfx Aet Hw Txjlwsgt Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1988, grinding length 0600 mm grinding width 200 mm workpiece height 250 mm magnetic plate size 600 x 200 mm total power requirement 4,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2000 x 1200 x 1650 mm With magnetic plate 600 x 200 mm and automatic dressing arrangement. Pjdpfx Aju Rt E Tslwsgt

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5600x1000x1550 mm Podpevz E E Aefx Alwsgt Weight 2500 kg Total power requirement 6,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1500x700x1600 mm Weight 900 kg Total power requirement 1,6 kw Pedpfx Ajvz Hfwolwegt

Condition: used, Surface Grinding Machine BURDETT type No 70 - 18" x 6" Travel X: 350 mm Pgjdpfx Aezwgrlolwot Travel Y: 150 mm Maxi grinding height: 180 mm Manual magnetic chuck Magnetic chuck dimensions: 350 x 150 mm Grinding wheel dimensions: Ø 210 mm x thickness 25 mm X and Y Axes: auto pass taking Z Axe: manual Lubricant tank Voltage : 380 V Dimensions (L x W x H): 1300 x 1200 x 1700 mm Weight: approx 1 T

Condition: used, Bench Grinder REMA DS 12/200 - 1 grind Rotation: 2900 RPM Grinding wheel: Ø 200 mm x 30 mm Motor: 0,9 kW Voltage: 380 V Width: 600 mm Pjdpfezwgt Nsx Alwjgt Depth: 400 mm Total height: 1100 mm Weight: approx 80 KG

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 6043, Year 2007 with Fanuc Series 16Oi Country of origin: CH Voltage: 3x400V/50Hz Dimensions: 216x160x216 cm Net machine weight: 3200 kg TECHNICAL SPECIFICATIONS X-axis: 300 mm Y-axis: 220 mm Pedpfx Alezxz R Ejwsgt Z-axis: 180 mm Resolution: 0.0001 mm Clamping capacity: 0.5 – 20 mm Grinding wheel diameter: 0.1 – 16 mm Maximum clamping length: 270 mm Grinding wheel diameter: 150 mm A-axis (grinding wheel rotation): -195 / +30° B-axis (grinding head rotation): -75 / +135° C-axis (spindle indexing): 0.001° W-axis: 620 mm U-axis: 500 mm Grinding wheel speeds, continuous: from 2000 min-1 to 7200 min-1 Spindle power: 7 kW Fire extinguishing system – CO₂ Kraft & Bauer – Not verified and no guarantee of functionality. To be serviced by you. Unless otherwise indicated, the technical data is provided without any commitment.

Condition: new, weight 720 kg diameter 1360 mm height 1200 mm 0 520 l Vibratory Surface Finishing Machines With Separator VKUE series machines can be used for surface finishing of metal and nonmetal Pedpjy Suu Tofx Alwogt work pieces. This type of machine has a large sieve surface and allows easy separation of the workpieces from the grinding stones. Optional Accesories - Pneumatic Sound Lid - Pneumatic Flap Control - Frequency Control - Dossage Pump - Magnetic Valve - Control Panel Base - Rinsing Pipe (Different Types) The pictures are for orientation only. The optional accessories can be purchased for an additional charge.

Condition: used, grinding length / mm grinding width / mm workpiece height / mm Schanbacher S 3 50 Saw Blade Sharpening Machine – working condition – industrial unit Pgjdpsy E Tyuefx Alwjt For sale is a high-quality circular saw blade sharpening machine manufactured by Willy Schanbacher KG (Germany). The machine is ideal for precise sharpening of circular saw blades used in metal and woodworking industries. Technical details: Manufacturer: Willy Schanbacher KG (Esslingen, Germany) Type: S 3 50 Serial number: 93 2187 Machine type: Saw blade sharpening machine Condition: Working condition Used, with normal signs of wear Last used without issues Features: Adjustable grinding angles (e.g. 90°, 120°, 140°) Precision grinding unit Feed mechanism for consistent sharpening Safety guard included Heavy-duty industrial design Applications: Metalworking Woodworking Workshops and sharpening services Scope of delivery: Machine as shown ?? Inspection possible by appointment ?? Shipping via freight forwarding available

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, KUHLMEYER Type ZBS Twin-Belt Grinding Machine Pgjdsza Uhhopfx Alwot - incl. automatic mode and scissor lift table - for rough and fine sanding in a single machine - Machine location: The Netherlands - Further technical specifications, information, and videos of the machine are available upon request.

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment Pgsdpfsyv Nb Njx Alwot - surface grinding pad

Condition: good (used), Year of construction: 1970, functionality: fully functional, Data : Tip width 300 mm Tip height 150 mm External grinding spindle 4.0 kW Grinding wheel max. 400 x 80 x 127 mm Spindle cone MK4 Workpiece headstock 0.55 kW Pedozu Incepfx Alwjgt Workpiece speeds 30 - 450 rpm Internal grinding spindle 1.5 kW

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Precision surface grinding machine Degen Type FSH 300 with digital display Technical data and features: >> Manufacturer's serial no. 1379, year of manufacture 2008 >> Max. grinding length 300 mm >> Max. grinding width 160 mm >> Working height with new/worn grinding wheel 240/290 mm >> Electrically operated magnetic clamping table 300 x 150 mm x 80 mm >> Total power requirement 4.6 kVA >> Space requirement: length 1.0 m x width 0.9 m x height 1.7 m >> Weight approx. 450 kg About the machine: Psdezu Sn Hspfx Alwegt Offered is a precision surface grinding machine from the German manufacturer Willy Degen, type FSH 300. A German-made product with high precision, an absolute top-quality machine. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: used, Year of construction: 1998, functionality: fully functional, Vibratory Finishing Bowl WALTHER TROWAL CD 200 Capacity: 200 L Year of construction: 1998 Coating in good condition (see photos) Bowl dimensions: Ø 1000 mm Width of the opening: 250 mm Maxi pieces height: 250 mm Motor: 2 speeds Motor rotation: 1450 RPM 2 possible speed ranges: high speed + low speed Manual hatch Independent electrical panel Pgsdpfxezww Tyo Alwot Equipped with 1 product dosing pump system Voltage: 380 V Dimensions (L x W x H): 1400 x 1000 x 1300 mm Weight: approx 600 kg

Condition: used, significantly increased accessories and three flanges for the SCHAUDT cylindrical grinding machine. Pgodpfx Alozwxulswst

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Worktable 250 x 500 mm. Magnetic chuck 250 x 500 mm. Maximum table load with magnetic chuck: 180 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 200 x 20 x 31.75 mm. Spindle motor power 2.2 kW. Total machine power 3.7 kW. Surface roughness up to Ra 0.63 µm. Includes: coolant system, magnetic separator, hydraulic station, lubrication, magnetic chuck, PLC controller, and touchscreen. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Pgodpfx Alezr H E Uswjt Another model with a larger worktable is available: the SMP3063AHD (635 x 305 mm) and costs €22,000.

Condition: good (used), PROTH PSGS-3060AH surface grinder Grinding surface: 300 × 600 mm Cross travel × longitudinal travel: 340 × 700 mm Spindle center height above the table: approx. 500 mm Table longitudinal feed rate: 1 to 25 m/min Standard grinding wheel: Ø355 × 25 × Ø127 mm Pedpfxjzxg Uve Alwsgt Spindle speed: 1,500 / 1,800 rpm at 50/60 Hz Spindle motor: 2.2 kW / 3 HP Net weight: approx. 1,650 kg Dimensions of packaged machine: approx. 2.28 × 1.74 × 2.06 m

Condition: excellent (used), *UNIVERSAL AVYAC AU GRINDER - With R. VASSAL variable speed drive* Universal AVYAC AU grinder, pedestal model, French made. Cross table, adjustable grinding wheel head, tool holder, electronic variable speed drive by R. VASSAL (right/left rotation + speed adjustment). Podpfozxhggox Alwsgt For sharpening milling cutters, drills, reamers, and tools. 380V Three-phase – In good condition. Video available upon request.

Condition: used, Year of construction: 1995, operating hours: 9,000 h, functionality: fully functional, center height: 225 mm, grinding length: 1,600 mm, STUDER S40 CNC Universal Cylindrical Grinding Machine with Polygon Grinding Attachment For sale is a STUDER S40 CNC universal cylindrical grinding machine, manufactured in 1995, with a GE Fanuc Series 16-GC control system and a polygon grinding attachment. The machine is equipped for various cylindrical grinding tasks and enables, among other things, face, plunge, internal, and cylindrical grinding. Additionally, the machine is equipped for polygon grinding. Technical Data Manufacturer: STUDER / Studer AG Model: S40 CNC Year of manufacture: 1995 Machine No.: 011.0166.60.028 Control system: GE Fanuc Series 16-GC Center distance: 1,600 mm Cross slide X: max. 275 mm Resolution: 0.0001 mm Maximum table swivel: 8.5° Equipment – Polygon grinding attachment – 2 grinding wheels plus 1 internal grinding unit, selectable via the control system – Face, plunge, internal, and cylindrical grinding – Automatic truing device – Steady rest Pjdpfxezw E Npo Alwegt – Magnetic chuck – Three-jaw chuck – Collets – Grinding between centers – Cycle control – DXF import – Grinding wheels in corundum, diamond, and CBN available – STUDER hand-held control unit The machine is in used condition with signs of wear and tear consistent with its age and use. An inspection is possible after prior arrangement. Price: €60,000 negotiable plus VAT. Location: 74343 Sachsenheim Collection/shipping by arrangement. Errors, changes, and prior sale reserved.

Condition: used, Year of construction: 1980, drill diameter 2,4-13 mm drilling length ca 165 mm lip angle 90-140 ° Pgodoztfzwspfx Alwet

Condition: new, Year of construction: 2026, CORMAK TSC630 Planer Knife Sharpener is a precise and efficient machine designed for sharpening planer knives, chipper knives, shredder knives, and other machine blades used in woodworking, sawmills, and industrial production facilities. Thanks to its ability to sharpen knives up to 630 mm in length, this model is an excellent solution wherever accuracy, repeatability, and fast tool restoration are essential. Dull knives result in poorer machining quality, increased machine load, and unnecessary downtime. The CORMAK TSC630 quickly restores the perfect sharpness of machine knives, ensuring high-quality grinding results and full control over the sharpening process. Main advantages of the machine Sharpening knives up to 630 mm – suitable for most standard planer knives and machine blades within this length range. Liquid cooling system – effectively removes heat generated during grinding, protecting the cutting edge from overheating. Adjustable sharpening angle 0–90° – allows precise adjustment according to the knife type and required cutting geometry. Smooth manual feed system – linear bearing guides ensure stable and precise movement of the grinding assembly. Adjustable clamps and stops – enable quick and repeatable positioning of the knife. Ability to sharpen several thin knives at once – stacking blocks allow simultaneous sharpening of planer knives with a thickness of 3 mm. Smooth grinding wheel height adjustment – allows accurate positioning of the grinding wheel relative to the sharpened knife. Collection tank with drain opening – enables collection and reuse of the coolant. Construction and technology The CORMAK TSC630 sharpener has been designed for users who require a stable, accurate, and convenient machine for daily knife sharpening operations. The grinding assembly moves along precision linear guides equipped with linear bearings, ensuring smooth movement of the grinding wheel across the entire length of the blade. This solution provides a uniform grinding process without the risk of uneven sharpening and allows full control over the sharpening operation, even when working with longer knives. Pjdozwk D Sspfx Alwogt Perfectly sharp knives without overheating the cutting edge Temperature control is one of the most important factors during sharpening. The integrated liquid cooling system effectively removes heat generated during grinding, protecting the material from overheating and loss of cutting properties. Thanks to the cooling system, sharpened knives maintain the correct geometry, retain sharpness for longer, and ensure high-quality performance after being installed back into the machine. Standard equipment CORMAK TSC630 knife sharpener Corundum grinding wheel Built-in cooling system Coolant collection tank with drain opening Blocks for simultaneous sharpening of several thin knives Adjustable clamps and stops Mounting elements 2 grinding wheels included 1 L of ES12 emulsifying oil User manual Technical specifications Parameter Value Motor power 1.1 kW Power supply 230 V Maximum knife length up to 630 mm Maximum knife width up to 150 mm Maximum knife thickness up to 30 mm Grinding wheel speed 2800 rpm Grinding wheel diameter / height 100 / 51 mm Grinding wheel thickness 13 mm Sharpening angle 0–90° Cooling system Yes Feed type Manual, with linear bearings Machine dimensions 1000 × 465 × 610 mm Weight 55 kg

Condition: excellent (used), Revolutions per minute 1400 Voltage 3x400V-50 Hz Power (kW) 3 Disc size, drive wheel (ø mm) 200x100x28 Sanding belt (mm) 100x1600 Pipe dimension (ø mm) 21-76 Extraction capacity (m³/h) 600 With extraction Length (mm) 1430 Width (mm) 810 Height (mm) 1350 Net weight (kg) 205 The Scantool 100 RSX is the perfect pipe grinding machine for all types of pipes and profiles. It simplifies welding and provides a better finish. The Scantool 100 RSX has been designed with serial production in mind, where precision and clean work are required. It is used in the manufacture of railings, frames, go-karts, lattice trolleys, wheelchairs, ship fittings, handrails, gates, doors, furniture frames, and stainless steel pipe and profile work for the food industry, among other applications. The Scantool 100 RSX grinds pipes and profiles made of any material with a diameter of 21 to 76 mm. Pgedjzuv Iqopfx Alwst Integrated extraction The Scantool 100 RSX features an integrated extraction system that removes most of the grinding dust from the sanding belt. When the Scantool 100S is mounted directly behind the grinding machine, the best possible dust collection solution is achieved. The Scantool Cyclone 100S is available as an option. The Scantool pipe grinding machine, model 100 RSX, offers the following advantages: • The only pipe grinding machine on the market where the grinding unit is adjusted to the desired grinding angle. • Therefore, it does not require any lateral space when grinding long pipes. • Every angle can be adjusted quickly and easily – without tools. • Precision grinding of pipes and profiles at all angles. • Perfect adjustment of the contact roller to the desired diameter. • High quality and robust side guide. • Extremely well suited for serial production.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 500 h, functionality: fully functional, workpiece weight (max.): 18,000 kg, table speed: 45,000 mm/min, year of last overhaul: 2019, travel distance X-axis: 8,825 mm, travel distance Y-axis: 3,010 mm, travel distance Z-axis: 2,500 mm, total width: 9,550 mm, total length: 24,360 mm, total height: 7,000 mm, table width: 1,800 mm, table length: 8,000 mm, Equipment: documentation/manual, Направляющая/поверхностный шлифовальный станок Обновлен с помощью контроллера SIEMENS CPU1511-1PN Система фильтрации (новая, 2019) Гидравлический стол; грузоподъемность: 18 000 кг Общая установленная электрическая мощность: 74 кВт Модернизация (капитный ремонт) в 2019 году стоимостью 1,1 миллиона евро Большой набор фланцев и шлифовальных кругов Обширный запас запасных частей: измерительное оборудование, защитные кожухи Цена включает демантакт и доставку клиенту в пределах ЕС WALDRICH COBURG 3010 Направляющая шлифовальная машина Вальдрих Кобург Станок Шлифовка Pjdpszt H A Ajfx Alwsgt 20FS3630